! Started logfile: J1058+2817_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:23:32 2016 obs J1058+2817_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1058+2817_S_2014_05_31_pus_uva.fits ! AN table 1: 192 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.45081 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1058+2817 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 15580 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1058+2817_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 900 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 900 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 900 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 900 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.995206Jy sigma=0.012721 ! Fit after self-cal, rms=0.954381Jy sigma=0.012296 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.507 mas, bmaj=6.831 mas, bpa=22.12 degrees ! Estimated noise=702.272 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.03716 Jy ! Component: 100 - total flux cleaned = 0.0454241 Jy ! Total flux subtracted in 100 components = 0.0454241 Jy ! Clean residual min=-0.002193 max=0.003134 Jy/beam ! Clean residual mean=-0.000001 rms=0.000669 Jy/beam ! Combined flux in latest and established models = 0.0454241 Jy ! Performing phase self-cal ! Adding 3 model components to the UV plane model. ! The established model now contains 3 components and 0.0454241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064443Jy sigma=0.000772 ! Fit after self-cal, rms=0.063919Jy sigma=0.000766 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.263 mas, bmaj=7.544 mas, bpa=17.9 degrees ! Estimated noise=451.048 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00312678 Jy ! Component: 100 - total flux cleaned = 0.00492359 Jy ! Component: 150 - total flux cleaned = 0.00619902 Jy ! Component: 200 - total flux cleaned = 0.00715649 Jy ! Total flux subtracted in 200 components = 0.00715649 Jy ! Clean residual min=-0.001397 max=0.001510 Jy/beam ! Clean residual mean=0.000002 rms=0.000392 Jy/beam ! Combined flux in latest and established models = 0.0525805 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 36 components and 0.0525805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063722Jy sigma=0.000765 ! Fit after self-cal, rms=0.063704Jy sigma=0.000764 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.81 HN 1.00 KP 1.05 ! LA 1.15 MK 1.00* NL 0.95 OV 0.98 ! PT 1.03 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.04 KP 1.03 ! LA 1.17 MK 1.00* NL 1.13 OV 1.02 ! PT 0.97 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.04 HN 1.18 KP 0.96 ! LA 0.89 MK 1.00* NL 1.11 OV 0.98 ! PT 0.90 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 0.95 HN 1.03 KP 0.87 ! LA 0.86 MK 1.00* NL 1.00 OV 0.98 ! PT 1.01 SC 0.88 ! ! ! Fit before self-cal, rms=0.063704Jy sigma=0.000764 ! Fit after self-cal, rms=0.061403Jy sigma=0.000761 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.207 mas, bmaj=7.573 mas, bpa=19.01 degrees ! Estimated noise=447.441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000488253 Jy ! Component: 100 - total flux cleaned = 0.000668937 Jy ! Component: 150 - total flux cleaned = 0.000835271 Jy ! Component: 200 - total flux cleaned = 0.000989219 Jy ! Total flux subtracted in 200 components = 0.000989219 Jy ! Clean residual min=-0.001163 max=0.001166 Jy/beam ! Clean residual mean=0.000001 rms=0.000299 Jy/beam ! Combined flux in latest and established models = 0.0535698 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 52 components and 0.0535698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061388Jy sigma=0.000760 ! Fit after self-cal, rms=0.061338Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061338Jy sigma=0.000759 ! Fit after self-cal, rms=0.060986Jy sigma=0.000759 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.199 mas, bmaj=7.585 mas, bpa=19.12 degrees ! Estimated noise=446.324 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000506899 Jy ! Component: 100 - total flux cleaned = 0.000541307 Jy ! Component: 150 - total flux cleaned = 0.000541094 Jy ! Component: 200 - total flux cleaned = 0.000517383 Jy ! Total flux subtracted in 200 components = 0.000517383 Jy ! Clean residual min=-0.001056 max=0.001176 Jy/beam ! Clean residual mean=0.000002 rms=0.000270 Jy/beam ! Combined flux in latest and established models = 0.0540871 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 71 components and 0.0540871 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060977Jy sigma=0.000759 ! Fit after self-cal, rms=0.060982Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -117). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00104145 Jy ! Component: 100 - total flux cleaned = 0.00152337 Jy ! Component: 150 - total flux cleaned = 0.00177359 Jy ! Component: 200 - total flux cleaned = 0.00189911 Jy ! Total flux subtracted in 200 components = 0.00189911 Jy ! Clean residual min=-0.001002 max=0.001106 Jy/beam ! Clean residual mean=0.000001 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0559863 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 97 components and 0.0559863 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060960Jy sigma=0.000758 ! Fit after self-cal, rms=0.060959Jy sigma=0.000758 ! Inverting map ! Added new window around map position (-119.5, 100). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000245232 Jy ! Component: 100 - total flux cleaned = 0.000580111 Jy ! Component: 150 - total flux cleaned = 0.000735039 Jy ! Component: 200 - total flux cleaned = 0.000791845 Jy ! Total flux subtracted in 200 components = 0.000791845 Jy ! Clean residual min=-0.000997 max=0.001004 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0567781 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 110 components and 0.0567781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060931Jy sigma=0.000758 ! Fit after self-cal, rms=0.060927Jy sigma=0.000758 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060927Jy sigma=0.000758 ! Fit after self-cal, rms=0.060636Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.195 mas, bmaj=7.593 mas, bpa=19.04 degrees ! Estimated noise=444.773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000220114 Jy ! Component: 100 - total flux cleaned = 0.000446962 Jy ! Component: 150 - total flux cleaned = 0.00053109 Jy ! Component: 200 - total flux cleaned = 0.000546123 Jy ! Total flux subtracted in 200 components = 0.000546123 Jy ! Clean residual min=-0.000981 max=0.000923 Jy/beam ! Clean residual mean=0.000001 rms=0.000234 Jy/beam ! Combined flux in latest and established models = 0.0573242 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 121 components and 0.0573242 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060622Jy sigma=0.000758 ! Fit after self-cal, rms=0.060617Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000128059 Jy ! Component: 100 - total flux cleaned = 0.000113579 Jy ! Component: 150 - total flux cleaned = 0.000113766 Jy ! Component: 200 - total flux cleaned = 8.74801e-05 Jy ! Total flux subtracted in 200 components = 8.74801e-05 Jy ! Clean residual min=-0.000974 max=0.000916 Jy/beam ! Clean residual mean=0.000001 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0574117 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 129 components and 0.0574117 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060610Jy sigma=0.000758 ! Fit after self-cal, rms=0.060609Jy sigma=0.000758 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060609Jy sigma=0.000758 ! Fit after self-cal, rms=0.060527Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.693 mas, bmaj=9.686 mas, bpa=2.819 degrees ! Estimated noise=518.237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.73434e-05 Jy ! Component: 100 - total flux cleaned = -8.11681e-05 Jy ! Component: 150 - total flux cleaned = -0.000112576 Jy ! Component: 200 - total flux cleaned = -0.00013195 Jy ! Total flux subtracted in 200 components = -0.00013195 Jy ! Clean residual min=-0.000833 max=0.000925 Jy/beam ! Clean residual mean=0.000002 rms=0.000246 Jy/beam ! Combined flux in latest and established models = 0.0572798 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 153 components and 0.0572798 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060525Jy sigma=0.000758 ! Fit after self-cal, rms=0.060524Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.56123e-05 Jy ! Component: 100 - total flux cleaned = -8.30095e-05 Jy ! Component: 150 - total flux cleaned = -8.29774e-05 Jy ! Component: 200 - total flux cleaned = -0.000107374 Jy ! Total flux subtracted in 200 components = -0.000107374 Jy ! Clean residual min=-0.000848 max=0.000899 Jy/beam ! Clean residual mean=0.000002 rms=0.000244 Jy/beam ! Combined flux in latest and established models = 0.0571724 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 165 components and 0.0571724 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060522Jy sigma=0.000758 ! Fit after self-cal, rms=0.060522Jy sigma=0.000758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.194 mas, bmaj=7.596 mas, bpa=18.99 degrees ! Estimated noise=444.309 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.194 x 7.596 at 18.99 degrees (North through East) ! Clean map min=-0.0017413 max=0.046931 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.438 mas, bmaj=6.896 mas, bpa=22.84 degrees ! Estimated noise=680.91 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365449 Jy ! Component: 100 - total flux cleaned = 0.0449119 Jy ! Component: 150 - total flux cleaned = 0.0475157 Jy ! Component: 200 - total flux cleaned = 0.0495522 Jy ! Total flux subtracted in 200 components = 0.0495522 Jy ! Clean residual min=-0.002137 max=0.002194 Jy/beam ! Clean residual mean=-0.000001 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0495522 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0495522 Jy ! Inverting map and beam ! Estimated beam: bmin=4.194 mas, bmaj=7.596 mas, bpa=18.99 degrees ! Estimated noise=444.309 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00225251 Jy ! Component: 100 - total flux cleaned = 0.00359255 Jy ! Component: 150 - total flux cleaned = 0.0044799 Jy ! Component: 200 - total flux cleaned = 0.0050195 Jy ! Total flux subtracted in 200 components = 0.0050195 Jy ! Clean residual min=-0.001105 max=0.001040 Jy/beam ! Clean residual mean=0.000001 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0545717 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 44 components and 0.0545717 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.693 mas, bmaj=9.686 mas, bpa=2.819 degrees ! Estimated noise=518.237 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000559621 Jy ! Component: 100 - total flux cleaned = 0.000885209 Jy ! Component: 150 - total flux cleaned = 0.00120757 Jy ! Component: 200 - total flux cleaned = 0.00142646 Jy ! Total flux subtracted in 200 components = 0.00142646 Jy ! Clean residual min=-0.000950 max=0.000871 Jy/beam ! Clean residual mean=0.000002 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.0559982 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191764 Jy ! Component: 100 - total flux cleaned = 0.000300852 Jy ! Component: 150 - total flux cleaned = 0.000385879 Jy ! Component: 200 - total flux cleaned = 0.000450995 Jy ! Total flux subtracted in 200 components = 0.000450995 Jy ! Clean residual min=-0.000886 max=0.000866 Jy/beam ! Clean residual mean=0.000002 rms=0.000254 Jy/beam ! Combined flux in latest and established models = 0.0564492 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 103 components and 0.0564492 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.194 mas, bmaj=7.596 mas, bpa=18.99 degrees ! Estimated noise=444.309 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.63736e-05 Jy ! Component: 100 - total flux cleaned = 8.64444e-05 Jy ! Component: 150 - total flux cleaned = 0.000185808 Jy ! Component: 200 - total flux cleaned = 0.000295112 Jy ! Total flux subtracted in 200 components = 0.000295112 Jy ! Clean residual min=-0.000985 max=0.000907 Jy/beam ! Clean residual mean=0.000001 rms=0.000239 Jy/beam ! Combined flux in latest and established models = 0.0567443 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 127 components and 0.0567443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060531Jy sigma=0.000758 ! Fit after self-cal, rms=0.060529Jy sigma=0.000758 wmodel J1058+2817_S_2014_05_31_pus_map.mod ! Writing 127 model components to file: J1058+2817_S_2014_05_31_pus_map.mod wobs J1058+2817_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1058+2817_S_2014_05_31_pus_uvs.fits wwins J1058+2817_S_2014_05_31_pus_map.win ! wwins: Wrote 4 windows to J1058+2817_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.0003117 Jy ! Component: 100 - total flux cleaned = -0.000459738 Jy ! Component: 150 - total flux cleaned = -0.000585315 Jy ! Component: 200 - total flux cleaned = -0.000630802 Jy ! Component: 250 - total flux cleaned = -0.000630454 Jy ! Component: 300 - total flux cleaned = -0.000643935 Jy ! Component: 350 - total flux cleaned = -0.000657251 Jy ! Component: 400 - total flux cleaned = -0.000617634 Jy ! Component: 450 - total flux cleaned = -0.000605007 Jy ! Component: 500 - total flux cleaned = -0.00058007 Jy ! Component: 550 - total flux cleaned = -0.000531152 Jy ! Component: 600 - total flux cleaned = -0.000531219 Jy ! Component: 650 - total flux cleaned = -0.000531003 Jy ! Component: 700 - total flux cleaned = -0.000519566 Jy ! Component: 750 - total flux cleaned = -0.000497015 Jy ! Component: 800 - total flux cleaned = -0.000463601 Jy ! Component: 850 - total flux cleaned = -0.000474685 Jy ! Component: 900 - total flux cleaned = -0.000431191 Jy ! Component: 950 - total flux cleaned = -0.000431037 Jy ! Component: 1000 - total flux cleaned = -0.000420479 Jy ! Component: 1050 - total flux cleaned = -0.000430799 Jy ! Component: 1100 - total flux cleaned = -0.000399743 Jy ! Component: 1150 - total flux cleaned = -0.00035915 Jy ! Component: 1200 - total flux cleaned = -0.000349033 Jy ! Component: 1250 - total flux cleaned = -0.000279837 Jy ! Component: 1300 - total flux cleaned = -0.000279937 Jy ! Component: 1350 - total flux cleaned = -0.000251046 Jy ! Component: 1400 - total flux cleaned = -0.000212892 Jy ! Component: 1450 - total flux cleaned = -0.000213006 Jy ! Component: 1500 - total flux cleaned = -0.000166409 Jy ! Component: 1550 - total flux cleaned = -0.000157096 Jy ! Component: 1600 - total flux cleaned = -0.000111477 Jy ! Component: 1650 - total flux cleaned = -0.000120441 Jy ! Component: 1700 - total flux cleaned = -7.57491e-05 Jy ! Component: 1750 - total flux cleaned = -5.81438e-05 Jy ! Component: 1800 - total flux cleaned = -4.06141e-05 Jy ! Component: 1850 - total flux cleaned = -3.19818e-05 Jy ! Component: 1900 - total flux cleaned = 2.36791e-06 Jy ! Component: 1950 - total flux cleaned = -6.18678e-06 Jy ! Component: 2000 - total flux cleaned = 2.24225e-06 Jy ! Component: 2050 - total flux cleaned = 1.05276e-05 Jy ! Component: 2100 - total flux cleaned = 3.52063e-05 Jy ! Component: 2150 - total flux cleaned = 5.14874e-05 Jy ! Component: 2200 - total flux cleaned = 6.76187e-05 Jy ! Component: 2250 - total flux cleaned = 4.34231e-05 Jy ! Component: 2300 - total flux cleaned = 4.34027e-05 Jy ! Component: 2350 - total flux cleaned = 6.72246e-05 Jy ! Component: 2400 - total flux cleaned = 8.28407e-05 Jy ! Component: 2450 - total flux cleaned = 5.16579e-05 Jy ! Component: 2500 - total flux cleaned = 4.40373e-05 Jy ! Component: 2550 - total flux cleaned = 5.17267e-05 Jy ! Component: 2600 - total flux cleaned = 5.93345e-05 Jy ! Component: 2650 - total flux cleaned = 6.67755e-05 Jy ! Component: 2700 - total flux cleaned = 5.92403e-05 Jy ! Component: 2750 - total flux cleaned = 3.69785e-05 Jy ! Component: 2800 - total flux cleaned = 4.44499e-05 Jy ! Component: 2850 - total flux cleaned = 2.97756e-05 Jy ! Component: 2900 - total flux cleaned = 1.52502e-05 Jy ! Component: 2950 - total flux cleaned = 2.96939e-05 Jy ! Component: 3000 - total flux cleaned = 3.68324e-05 Jy ! Component: 3050 - total flux cleaned = 2.25906e-05 Jy ! Component: 3100 - total flux cleaned = 2.95965e-05 Jy ! Component: 3150 - total flux cleaned = 2.25178e-05 Jy ! Component: 3200 - total flux cleaned = 2.25196e-05 Jy ! Component: 3250 - total flux cleaned = 1.77722e-06 Jy ! Component: 3300 - total flux cleaned = 8.6862e-06 Jy ! Component: 3350 - total flux cleaned = 1.85736e-06 Jy ! Component: 3400 - total flux cleaned = 8.67084e-06 Jy ! Component: 3450 - total flux cleaned = 2.00565e-06 Jy ! Component: 3500 - total flux cleaned = 8.72527e-06 Jy ! Component: 3550 - total flux cleaned = 8.64295e-06 Jy ! Component: 3600 - total flux cleaned = -4.62705e-06 Jy ! Component: 3650 - total flux cleaned = -1.1227e-05 Jy ! Component: 3700 - total flux cleaned = -4.75202e-06 Jy ! Component: 3750 - total flux cleaned = -4.7245e-06 Jy ! Component: 3800 - total flux cleaned = -2.39868e-05 Jy ! Component: 3850 - total flux cleaned = -3.03422e-05 Jy ! Component: 3900 - total flux cleaned = -1.11956e-05 Jy ! Component: 3950 - total flux cleaned = -4.89751e-06 Jy ! Component: 4000 - total flux cleaned = -4.94032e-06 Jy ! Component: 4050 - total flux cleaned = -4.94555e-06 Jy ! Total flux subtracted in 4096 components = 1.27413e-06 Jy ! Clean residual min=-0.000348 max=0.000368 Jy/beam ! Clean residual mean=0.000000 rms=0.000112 Jy/beam ! Combined flux in latest and established models = 0.0567456 Jy keep ! Adding 251 model components to the UV plane model. ! The established model now contains 378 components and 0.0567456 Jy ![Exited script file: muppet] wmap "J1058+2817_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.194 x 7.596 at 18.99 degrees (North through East) ! Clean map min=-0.0017382 max=0.046638 Jy/beam ! Writing clean map to FITS file: J1058+2817_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0466376 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000110415 device "J1058+2817_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1058+2817_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.710253 0.710253 1.42051 2.84101 5.68203 11.3641 22.7281 45.4562 90.9124 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.046 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.194 x 7.596 at 18.99 degrees (North through East) ! Clean map min=-0.0017382 max=0.046638 Jy/beam quit ! Quitting program ! Log file J1058+2817_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:23:38 2016