! Started logfile: J1037-2705_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:22:42 2016 obs J1037-2705_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J1037-2705_S_2014_05_31_pus_uva.fits ! AN table 1: 122 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.789071 visibilities/baseline/integration-bin. ! Found source: J1037-2705 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17328 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J1037-2705_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 131 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.945397Jy sigma=0.008241 ! Fit after self-cal, rms=0.887587Jy sigma=0.007789 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.069 mas, bmaj=11.83 mas, bpa=15.77 degrees ! Estimated noise=1058.79 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0904069 Jy ! Component: 100 - total flux cleaned = 0.110953 Jy ! Total flux subtracted in 100 components = 0.110953 Jy ! Clean residual min=-0.005299 max=0.008407 Jy/beam ! Clean residual mean=-0.000024 rms=0.001488 Jy/beam ! Combined flux in latest and established models = 0.110953 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.110953 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098576Jy sigma=0.000793 ! Fit after self-cal, rms=0.098552Jy sigma=0.000792 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.983 mas, bmaj=14.09 mas, bpa=14.25 degrees ! Estimated noise=622.556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0119369 Jy ! Component: 100 - total flux cleaned = 0.0181182 Jy ! Component: 150 - total flux cleaned = 0.0216987 Jy ! Component: 200 - total flux cleaned = 0.0238473 Jy ! Total flux subtracted in 200 components = 0.0238473 Jy ! Clean residual min=-0.003089 max=0.003120 Jy/beam ! Clean residual mean=-0.000020 rms=0.000825 Jy/beam ! Combined flux in latest and established models = 0.134801 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 58 components and 0.134801 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097204Jy sigma=0.000779 ! Fit after self-cal, rms=0.097220Jy sigma=0.000779 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.85 HN 1.09 KP 1.04 ! LA 1.16 MK 1.00* NL 1.04 OV 0.98 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.10 KP 1.02 ! LA 1.13 MK 1.00* NL 1.04 OV 1.00 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.09 HN 1.08 KP 0.94 ! LA 0.86 MK 1.00* NL 1.01 OV 0.96 ! PT 0.97 SC 0.97 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.07 KP 0.89 ! LA 0.85 MK 1.00* NL 1.07 OV 0.99 ! PT 0.99 SC 0.99 ! ! ! Fit before self-cal, rms=0.097220Jy sigma=0.000779 ! Fit after self-cal, rms=0.096942Jy sigma=0.000771 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.997 mas, bmaj=14.31 mas, bpa=14.57 degrees ! Estimated noise=619.26 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00116526 Jy ! Component: 100 - total flux cleaned = -0.0012517 Jy ! Component: 150 - total flux cleaned = -0.00136833 Jy ! Component: 200 - total flux cleaned = -0.0014738 Jy ! Total flux subtracted in 200 components = -0.0014738 Jy ! Clean residual min=-0.002244 max=0.002990 Jy/beam ! Clean residual mean=-0.000021 rms=0.000679 Jy/beam ! Combined flux in latest and established models = 0.133327 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 66 components and 0.133327 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096893Jy sigma=0.000771 ! Fit after self-cal, rms=0.096916Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096916Jy sigma=0.000770 ! Fit after self-cal, rms=0.100095Jy sigma=0.000769 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4 mas, bmaj=14.26 mas, bpa=14.41 degrees ! Estimated noise=618.948 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000908866 Jy ! Component: 100 - total flux cleaned = -0.000988548 Jy ! Component: 150 - total flux cleaned = -0.00103513 Jy ! Component: 200 - total flux cleaned = -0.00107693 Jy ! Total flux subtracted in 200 components = -0.00107693 Jy ! Clean residual min=-0.002184 max=0.002739 Jy/beam ! Clean residual mean=-0.000014 rms=0.000609 Jy/beam ! Combined flux in latest and established models = 0.13225 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 75 components and 0.13225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100077Jy sigma=0.000769 ! Fit after self-cal, rms=0.100136Jy sigma=0.000769 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (15.5, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00261326 Jy ! Component: 100 - total flux cleaned = 0.00419126 Jy ! Component: 150 - total flux cleaned = 0.00505996 Jy ! Component: 200 - total flux cleaned = 0.00538657 Jy ! Total flux subtracted in 200 components = 0.00538657 Jy ! Clean residual min=-0.001896 max=0.001812 Jy/beam ! Clean residual mean=-0.000004 rms=0.000516 Jy/beam ! Combined flux in latest and established models = 0.137636 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 112 components and 0.137636 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100060Jy sigma=0.000768 ! Fit after self-cal, rms=0.100052Jy sigma=0.000768 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100052Jy sigma=0.000768 ! Fit after self-cal, rms=0.101187Jy sigma=0.000768 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=4.002 mas, bmaj=14.24 mas, bpa=14.44 degrees ! Estimated noise=617.649 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000747897 Jy ! Component: 100 - total flux cleaned = 0.00127079 Jy ! Component: 150 - total flux cleaned = 0.00147439 Jy ! Component: 200 - total flux cleaned = 0.00165785 Jy ! Total flux subtracted in 200 components = 0.00165785 Jy ! Clean residual min=-0.001839 max=0.001656 Jy/beam ! Clean residual mean=-0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.139294 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 122 components and 0.139294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101157Jy sigma=0.000767 ! Fit after self-cal, rms=0.101174Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000236074 Jy ! Component: 100 - total flux cleaned = 0.000404489 Jy ! Component: 150 - total flux cleaned = 0.000559567 Jy ! Component: 200 - total flux cleaned = 0.00065496 Jy ! Total flux subtracted in 200 components = 0.00065496 Jy ! Clean residual min=-0.001832 max=0.001635 Jy/beam ! Clean residual mean=-0.000001 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.139949 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 128 components and 0.139949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101159Jy sigma=0.000767 ! Fit after self-cal, rms=0.101160Jy sigma=0.000767 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101160Jy sigma=0.000767 ! Fit after self-cal, rms=0.101296Jy sigma=0.000767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=21.55 mas, bpa=4.88 degrees ! Estimated noise=682.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000156421 Jy ! Component: 100 - total flux cleaned = 0.000415164 Jy ! Component: 150 - total flux cleaned = 0.00052409 Jy ! Component: 200 - total flux cleaned = 0.000563791 Jy ! Total flux subtracted in 200 components = 0.000563791 Jy ! Clean residual min=-0.001949 max=0.001829 Jy/beam ! Clean residual mean=-0.000006 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.140513 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 139 components and 0.140513 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101288Jy sigma=0.000767 ! Fit after self-cal, rms=0.101290Jy sigma=0.000767 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.55179e-05 Jy ! Component: 100 - total flux cleaned = 8.6191e-05 Jy ! Component: 150 - total flux cleaned = 0.000121935 Jy ! Component: 200 - total flux cleaned = 0.000165707 Jy ! Total flux subtracted in 200 components = 0.000165707 Jy ! Clean residual min=-0.001972 max=0.001801 Jy/beam ! Clean residual mean=-0.000006 rms=0.000569 Jy/beam ! Combined flux in latest and established models = 0.140679 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 149 components and 0.140679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101286Jy sigma=0.000767 ! Fit after self-cal, rms=0.101286Jy sigma=0.000767 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=14.23 mas, bpa=14.46 degrees ! Estimated noise=616.337 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 14.23 at 14.46 degrees (North through East) ! Clean map min=-0.0017089 max=0.11384 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.061 mas, bmaj=11.92 mas, bpa=15.96 degrees ! Estimated noise=1052.49 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0897069 Jy ! Component: 100 - total flux cleaned = 0.1099 Jy ! Component: 150 - total flux cleaned = 0.118123 Jy ! Component: 200 - total flux cleaned = 0.122917 Jy ! Total flux subtracted in 200 components = 0.122917 Jy ! Clean residual min=-0.003514 max=0.003317 Jy/beam ! Clean residual mean=-0.000014 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.122917 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 29 model components to the UV plane model. ! The established model now contains 29 components and 0.122917 Jy ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=14.23 mas, bpa=14.46 degrees ! Estimated noise=616.337 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429351 Jy ! Component: 100 - total flux cleaned = 0.00721792 Jy ! Component: 150 - total flux cleaned = 0.00947322 Jy ! Component: 200 - total flux cleaned = 0.0112925 Jy ! Total flux subtracted in 200 components = 0.0112925 Jy ! Clean residual min=-0.001802 max=0.001694 Jy/beam ! Clean residual mean=-0.000014 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.13421 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 80 components and 0.13421 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.346 mas, bmaj=21.55 mas, bpa=4.88 degrees ! Estimated noise=682.632 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00184567 Jy ! Component: 100 - total flux cleaned = 0.00315042 Jy ! Component: 150 - total flux cleaned = 0.00411726 Jy ! Component: 200 - total flux cleaned = 0.00486825 Jy ! Total flux subtracted in 200 components = 0.00486825 Jy ! Clean residual min=-0.001937 max=0.001768 Jy/beam ! Clean residual mean=-0.000011 rms=0.000580 Jy/beam ! Combined flux in latest and established models = 0.139078 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589318 Jy ! Component: 100 - total flux cleaned = 0.000952069 Jy ! Component: 150 - total flux cleaned = 0.00114801 Jy ! Component: 200 - total flux cleaned = 0.00133509 Jy ! Total flux subtracted in 200 components = 0.00133509 Jy ! Clean residual min=-0.001865 max=0.001710 Jy/beam ! Clean residual mean=-0.000008 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.140413 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 146 components and 0.140413 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=4.003 mas, bmaj=14.23 mas, bpa=14.46 degrees ! Estimated noise=616.337 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.27871e-06 Jy ! Component: 100 - total flux cleaned = -7.87044e-06 Jy ! Component: 150 - total flux cleaned = 1.59909e-05 Jy ! Component: 200 - total flux cleaned = 8.3177e-05 Jy ! Total flux subtracted in 200 components = 8.3177e-05 Jy ! Clean residual min=-0.001678 max=0.001557 Jy/beam ! Clean residual mean=-0.000003 rms=0.000449 Jy/beam ! Combined flux in latest and established models = 0.140496 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 168 components and 0.140496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101280Jy sigma=0.000767 ! Fit after self-cal, rms=0.101277Jy sigma=0.000767 wmodel J1037-2705_S_2014_05_31_pus_map.mod ! Writing 168 model components to file: J1037-2705_S_2014_05_31_pus_map.mod wobs J1037-2705_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J1037-2705_S_2014_05_31_pus_uvs.fits wwins J1037-2705_S_2014_05_31_pus_map.win ! wwins: Wrote 3 windows to J1037-2705_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000226472 Jy ! Component: 100 - total flux cleaned = -4.51854e-06 Jy ! Component: 150 - total flux cleaned = 0.000259345 Jy ! Component: 200 - total flux cleaned = 0.000386469 Jy ! Component: 250 - total flux cleaned = 0.000581388 Jy ! Component: 300 - total flux cleaned = 0.000722103 Jy ! Component: 350 - total flux cleaned = 0.000925622 Jy ! Component: 400 - total flux cleaned = 0.001057 Jy ! Component: 450 - total flux cleaned = 0.00116424 Jy ! Component: 500 - total flux cleaned = 0.00126882 Jy ! Component: 550 - total flux cleaned = 0.00135057 Jy ! Component: 600 - total flux cleaned = 0.00149017 Jy ! Component: 650 - total flux cleaned = 0.00152923 Jy ! Component: 700 - total flux cleaned = 0.00160581 Jy ! Component: 750 - total flux cleaned = 0.00169955 Jy ! Component: 800 - total flux cleaned = 0.00179186 Jy ! Component: 850 - total flux cleaned = 0.00184628 Jy ! Component: 900 - total flux cleaned = 0.00195299 Jy ! Component: 950 - total flux cleaned = 0.00204015 Jy ! Component: 1000 - total flux cleaned = 0.00209174 Jy ! Component: 1050 - total flux cleaned = 0.00217623 Jy ! Component: 1100 - total flux cleaned = 0.00225899 Jy ! Component: 1150 - total flux cleaned = 0.00229183 Jy ! Component: 1200 - total flux cleaned = 0.00237225 Jy ! Component: 1250 - total flux cleaned = 0.00246694 Jy ! Component: 1300 - total flux cleaned = 0.00249799 Jy ! Component: 1350 - total flux cleaned = 0.00257464 Jy ! Component: 1400 - total flux cleaned = 0.00265042 Jy ! Component: 1450 - total flux cleaned = 0.00275521 Jy ! Component: 1500 - total flux cleaned = 0.00287315 Jy ! Component: 1550 - total flux cleaned = 0.00288769 Jy ! Component: 1600 - total flux cleaned = 0.00297384 Jy ! Component: 1650 - total flux cleaned = 0.00301644 Jy ! Component: 1700 - total flux cleaned = 0.00307241 Jy ! Component: 1750 - total flux cleaned = 0.00312782 Jy ! Component: 1800 - total flux cleaned = 0.00312783 Jy ! Component: 1850 - total flux cleaned = 0.00318212 Jy ! Component: 1900 - total flux cleaned = 0.00324912 Jy ! Component: 1950 - total flux cleaned = 0.00330186 Jy ! Component: 2000 - total flux cleaned = 0.00330181 Jy ! Component: 2050 - total flux cleaned = 0.00335364 Jy ! Component: 2100 - total flux cleaned = 0.00339207 Jy ! Component: 2150 - total flux cleaned = 0.00341742 Jy ! Component: 2200 - total flux cleaned = 0.00345519 Jy ! Component: 2250 - total flux cleaned = 0.00348014 Jy ! Component: 2300 - total flux cleaned = 0.00354193 Jy ! Component: 2350 - total flux cleaned = 0.00357839 Jy ! Component: 2400 - total flux cleaned = 0.00362661 Jy ! Component: 2450 - total flux cleaned = 0.0036028 Jy ! Component: 2500 - total flux cleaned = 0.00367414 Jy ! Component: 2550 - total flux cleaned = 0.00372098 Jy ! Component: 2600 - total flux cleaned = 0.00373249 Jy ! Component: 2650 - total flux cleaned = 0.00373253 Jy ! Component: 2700 - total flux cleaned = 0.00380113 Jy ! Component: 2750 - total flux cleaned = 0.00378974 Jy ! Component: 2800 - total flux cleaned = 0.00381208 Jy ! Component: 2850 - total flux cleaned = 0.00384549 Jy ! Component: 2900 - total flux cleaned = 0.00383447 Jy ! Component: 2950 - total flux cleaned = 0.00383454 Jy ! Component: 3000 - total flux cleaned = 0.00388891 Jy ! Component: 3050 - total flux cleaned = 0.00387802 Jy ! Component: 3100 - total flux cleaned = 0.00391002 Jy ! Component: 3150 - total flux cleaned = 0.00390993 Jy ! Component: 3200 - total flux cleaned = 0.00393088 Jy ! Component: 3250 - total flux cleaned = 0.00393085 Jy ! Component: 3300 - total flux cleaned = 0.00395153 Jy ! Component: 3350 - total flux cleaned = 0.00393101 Jy ! Component: 3400 - total flux cleaned = 0.00398212 Jy ! Component: 3450 - total flux cleaned = 0.00395173 Jy ! Component: 3500 - total flux cleaned = 0.00399214 Jy ! Component: 3550 - total flux cleaned = 0.00403197 Jy ! Component: 3600 - total flux cleaned = 0.00403195 Jy ! Component: 3650 - total flux cleaned = 0.00401223 Jy ! Component: 3700 - total flux cleaned = 0.00405146 Jy ! Component: 3750 - total flux cleaned = 0.00408061 Jy ! Component: 3800 - total flux cleaned = 0.00408071 Jy ! Component: 3850 - total flux cleaned = 0.00415747 Jy ! Component: 3900 - total flux cleaned = 0.00420508 Jy ! Component: 3950 - total flux cleaned = 0.00423342 Jy ! Component: 4000 - total flux cleaned = 0.00422404 Jy ! Component: 4050 - total flux cleaned = 0.00432714 Jy ! Total flux subtracted in 4096 components = 0.0043457 Jy ! Clean residual min=-0.000590 max=0.000552 Jy/beam ! Clean residual mean=0.000002 rms=0.000183 Jy/beam ! Combined flux in latest and established models = 0.144842 Jy keep ! Adding 280 model components to the UV plane model. ! The established model now contains 448 components and 0.144842 Jy ![Exited script file: muppet] wmap "J1037-2705_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 14.23 at 14.46 degrees (North through East) ! Clean map min=-0.0010714 max=0.11398 Jy/beam ! Writing clean map to FITS file: J1037-2705_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.113975 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000181321 device "J1037-2705_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J1037-2705_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.477265 0.477265 0.954529 1.90906 3.81812 7.63623 15.2725 30.5449 61.0899 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.113 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 4.003 x 14.23 at 14.46 degrees (North through East) ! Clean map min=-0.0010714 max=0.11398 Jy/beam quit ! Quitting program ! Log file J1037-2705_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:22:48 2016