! Started logfile: J1019-2708_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:22:17 2016
obs J1019-2708_S_2014_05_31_pus_uva.fits
! Reading UV FITS file: J1019-2708_S_2014_05_31_pus_uva.fits
! AN table 1: 121 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.788246 visibilities/baseline/integration-bin.
! Found source: J1019-2708
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23588e+09      3.2e+07          1      3.2e+07
!  02        2  2.26788e+09      3.2e+07          1      3.2e+07
!  03        3  2.29988e+09      3.2e+07          1      3.2e+07
!  04        4  2.36388e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 336 lines of history.
! 
! Reading 17168 visibilities.
select I
! Polarization I is unavailable.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@muppet J1019-2708_S_2014_05_31_pus]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 131 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=0.916631Jy  sigma=0.007969
! Fit after  self-cal, rms=0.887874Jy  sigma=0.007746
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.036 mas, bmaj=11.83 mas, bpa=17.14 degrees
! Estimated noise=981.438 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0876655 Jy
! Component: 100  -  total flux cleaned = 0.108102 Jy
! Total flux subtracted in 100 components = 0.108102 Jy
! Clean residual min=-0.004887 max=0.007840 Jy/beam
! Clean residual mean=-0.000014 rms=0.001377 Jy/beam
! Combined flux in latest and established models = 0.108102 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.108102 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100315Jy  sigma=0.000796
! Fit after  self-cal, rms=0.100264Jy  sigma=0.000796
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.978 mas, bmaj=14.26 mas, bpa=15.61 degrees
! Estimated noise=630.16 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0135404 Jy
! Component: 100  -  total flux cleaned = 0.0205319 Jy
! Component: 150  -  total flux cleaned = 0.0245137 Jy
! Component: 200  -  total flux cleaned = 0.0269284 Jy
! Total flux subtracted in 200 components = 0.0269284 Jy
! Clean residual min=-0.002855 max=0.003029 Jy/beam
! Clean residual mean=0.000035 rms=0.000850 Jy/beam
! Combined flux in latest and established models = 0.13503 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 54 components and 0.13503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098551Jy  sigma=0.000779
! Fit after  self-cal, rms=0.098567Jy  sigma=0.000779
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.78     HN        1.11     KP        1.05     
!   LA        1.19     MK        1.00*    NL        0.98     OV        0.95     
!   PT        1.04     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.99     HN        1.18     KP        1.03     
!   LA        1.13     MK        1.00*    NL        1.01     OV        0.99     
!   PT        1.00     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.09     HN        1.11     KP        0.91     
!   LA        0.90     MK        1.00*    NL        0.98     OV        0.92     
!   PT        0.98     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.91     HN        1.07     KP        0.90     
!   LA        0.89     MK        1.00*    NL        1.05     OV        0.96     
!   PT        1.03     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.098567Jy  sigma=0.000779
! Fit after  self-cal, rms=0.097644Jy  sigma=0.000769
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.991 mas, bmaj=14.48 mas, bpa=15.97 degrees
! Estimated noise=624.771 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00137975 Jy
! Component: 100  -  total flux cleaned = -0.00163459 Jy
! Component: 150  -  total flux cleaned = -0.00176707 Jy
! Component: 200  -  total flux cleaned = -0.00184789 Jy
! Total flux subtracted in 200 components = -0.00184789 Jy
! Clean residual min=-0.002481 max=0.002461 Jy/beam
! Clean residual mean=0.000016 rms=0.000612 Jy/beam
! Combined flux in latest and established models = 0.133182 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.133182 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097582Jy  sigma=0.000769
! Fit after  self-cal, rms=0.097611Jy  sigma=0.000769
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097611Jy  sigma=0.000769
! Fit after  self-cal, rms=0.101840Jy  sigma=0.000767
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.993 mas, bmaj=14.44 mas, bpa=15.76 degrees
! Estimated noise=624.241 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0010153 Jy
! Component: 100  -  total flux cleaned = -0.00113057 Jy
! Component: 150  -  total flux cleaned = -0.00117789 Jy
! Component: 200  -  total flux cleaned = -0.0012385 Jy
! Total flux subtracted in 200 components = -0.0012385 Jy
! Clean residual min=-0.001979 max=0.001723 Jy/beam
! Clean residual mean=0.000015 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.131944 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 78 components and 0.131944 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101824Jy  sigma=0.000766
! Fit after  self-cal, rms=0.101903Jy  sigma=0.000766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.15242e-05 Jy
! Component: 100  -  total flux cleaned = -7.20029e-05 Jy
! Component: 150  -  total flux cleaned = -8.67631e-05 Jy
! Component: 200  -  total flux cleaned = -8.61827e-05 Jy
! Total flux subtracted in 200 components = -8.61827e-05 Jy
! Clean residual min=-0.001998 max=0.001727 Jy/beam
! Clean residual mean=0.000015 rms=0.000476 Jy/beam
! Combined flux in latest and established models = 0.131857 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 84 components and 0.131857 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101899Jy  sigma=0.000766
! Fit after  self-cal, rms=0.101898Jy  sigma=0.000766
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101898Jy  sigma=0.000766
! Fit after  self-cal, rms=0.104203Jy  sigma=0.000766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.992 mas, bmaj=14.46 mas, bpa=15.81 degrees
! Estimated noise=624.397 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000545509 Jy
! Component: 100  -  total flux cleaned = -0.00057077 Jy
! Component: 150  -  total flux cleaned = -0.000592171 Jy
! Component: 200  -  total flux cleaned = -0.00061062 Jy
! Total flux subtracted in 200 components = -0.00061062 Jy
! Clean residual min=-0.001895 max=0.001691 Jy/beam
! Clean residual mean=0.000015 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.131247 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 87 components and 0.131247 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104191Jy  sigma=0.000766
! Fit after  self-cal, rms=0.104221Jy  sigma=0.000766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.65502e-05 Jy
! Component: 100  -  total flux cleaned = -6.1936e-05 Jy
! Component: 150  -  total flux cleaned = -7.56994e-05 Jy
! Component: 200  -  total flux cleaned = -8.75345e-05 Jy
! Total flux subtracted in 200 components = -8.75345e-05 Jy
! Clean residual min=-0.001887 max=0.001683 Jy/beam
! Clean residual mean=0.000015 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.131159 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 90 components and 0.131159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104217Jy  sigma=0.000766
! Fit after  self-cal, rms=0.104217Jy  sigma=0.000766
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104217Jy  sigma=0.000766
! Fit after  self-cal, rms=0.105144Jy  sigma=0.000766
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.336 mas, bmaj=21.89 mas, bpa=6.439 degrees
! Estimated noise=689.276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000437156 Jy
! Component: 100  -  total flux cleaned = -0.000490468 Jy
! Component: 150  -  total flux cleaned = -0.000512549 Jy
! Component: 200  -  total flux cleaned = -0.000537906 Jy
! Total flux subtracted in 200 components = -0.000537906 Jy
! Clean residual min=-0.001902 max=0.001573 Jy/beam
! Clean residual mean=0.000024 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.130621 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 94 components and 0.130621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105142Jy  sigma=0.000766
! Fit after  self-cal, rms=0.105156Jy  sigma=0.000766
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.38526e-05 Jy
! Component: 100  -  total flux cleaned = -2.24398e-05 Jy
! Component: 150  -  total flux cleaned = -2.2243e-05 Jy
! Component: 200  -  total flux cleaned = -2.19653e-05 Jy
! Total flux subtracted in 200 components = -2.19653e-05 Jy
! Clean residual min=-0.001905 max=0.001574 Jy/beam
! Clean residual mean=0.000024 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.130599 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 96 components and 0.130599 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105155Jy  sigma=0.000766
! Fit after  self-cal, rms=0.105156Jy  sigma=0.000766
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.99 mas, bmaj=14.47 mas, bpa=15.88 degrees
! Estimated noise=624.24 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.99 x 14.47 at 15.88 degrees (North through East)
! Clean map  min=-0.0018337  max=0.115 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.008 mas, bmaj=11.96 mas, bpa=17.34 degrees
! Estimated noise=981.285 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0874054 Jy
! Component: 100  -  total flux cleaned = 0.108383 Jy
! Component: 150  -  total flux cleaned = 0.116563 Jy
! Component: 200  -  total flux cleaned = 0.121263 Jy
! Total flux subtracted in 200 components = 0.121263 Jy
! Clean residual min=-0.003370 max=0.002790 Jy/beam
! Clean residual mean=-0.000001 rms=0.000764 Jy/beam
! Combined flux in latest and established models = 0.121263 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.121263 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.99 mas, bmaj=14.47 mas, bpa=15.88 degrees
! Estimated noise=624.24 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00440779 Jy
! Component: 100  -  total flux cleaned = 0.00667225 Jy
! Component: 150  -  total flux cleaned = 0.00793963 Jy
! Component: 200  -  total flux cleaned = 0.00866226 Jy
! Total flux subtracted in 200 components = 0.00866226 Jy
! Clean residual min=-0.001795 max=0.001771 Jy/beam
! Clean residual mean=0.000013 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.129925 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 47 components and 0.129925 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.336 mas, bmaj=21.89 mas, bpa=6.439 degrees
! Estimated noise=689.276 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000462779 Jy
! Component: 100  -  total flux cleaned = 0.000509089 Jy
! Component: 150  -  total flux cleaned = 0.000546384 Jy
! Component: 200  -  total flux cleaned = 0.000570458 Jy
! Total flux subtracted in 200 components = 0.000570458 Jy
! Clean residual min=-0.001992 max=0.001607 Jy/beam
! Clean residual mean=0.000023 rms=0.000451 Jy/beam
! Combined flux in latest and established models = 0.130496 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.43222e-05 Jy
! Component: 100  -  total flux cleaned = 2.09357e-05 Jy
! Component: 150  -  total flux cleaned = 3.34443e-05 Jy
! Component: 200  -  total flux cleaned = 3.91036e-05 Jy
! Total flux subtracted in 200 components = 3.91036e-05 Jy
! Clean residual min=-0.001986 max=0.001600 Jy/beam
! Clean residual mean=0.000023 rms=0.000450 Jy/beam
! Combined flux in latest and established models = 0.130535 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 63 components and 0.130535 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.99 mas, bmaj=14.47 mas, bpa=15.88 degrees
! Estimated noise=624.24 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.57404e-05 Jy
! Component: 100  -  total flux cleaned = -0.000138059 Jy
! Component: 150  -  total flux cleaned = -0.000185128 Jy
! Component: 200  -  total flux cleaned = -0.000213111 Jy
! Total flux subtracted in 200 components = -0.000213111 Jy
! Clean residual min=-0.001796 max=0.001756 Jy/beam
! Clean residual mean=0.000014 rms=0.000459 Jy/beam
! Combined flux in latest and established models = 0.130322 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 69 components and 0.130322 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.105165Jy  sigma=0.000766
! Fit after  self-cal, rms=0.105165Jy  sigma=0.000766
wmodel J1019-2708_S_2014_05_31_pus_map.mod
! Writing 69 model components to file: J1019-2708_S_2014_05_31_pus_map.mod
wobs J1019-2708_S_2014_05_31_pus_uvs.fits
! Writing UV FITS file: J1019-2708_S_2014_05_31_pus_uvs.fits
wwins J1019-2708_S_2014_05_31_pus_map.win
! wwins: Wrote 1 windows to J1019-2708_S_2014_05_31_pus_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 5.87065e-05 Jy
! Component: 100  -  total flux cleaned = 0.000296168 Jy
! Component: 150  -  total flux cleaned = 0.000575398 Jy
! Component: 200  -  total flux cleaned = 0.000815947 Jy
! Component: 250  -  total flux cleaned = 0.00089432 Jy
! Component: 300  -  total flux cleaned = 0.000994974 Jy
! Component: 350  -  total flux cleaned = 0.00101976 Jy
! Component: 400  -  total flux cleaned = 0.00116272 Jy
! Component: 450  -  total flux cleaned = 0.00127899 Jy
! Component: 500  -  total flux cleaned = 0.00141544 Jy
! Component: 550  -  total flux cleaned = 0.0015714 Jy
! Component: 600  -  total flux cleaned = 0.0015932 Jy
! Component: 650  -  total flux cleaned = 0.0016581 Jy
! Component: 700  -  total flux cleaned = 0.00174252 Jy
! Component: 750  -  total flux cleaned = 0.00182535 Jy
! Component: 800  -  total flux cleaned = 0.00190721 Jy
! Component: 850  -  total flux cleaned = 0.00188697 Jy
! Component: 900  -  total flux cleaned = 0.001907 Jy
! Component: 950  -  total flux cleaned = 0.00196603 Jy
! Component: 1000  -  total flux cleaned = 0.002024 Jy
! Component: 1050  -  total flux cleaned = 0.00204315 Jy
! Component: 1100  -  total flux cleaned = 0.00209943 Jy
! Component: 1150  -  total flux cleaned = 0.0020808 Jy
! Component: 1200  -  total flux cleaned = 0.00211747 Jy
! Component: 1250  -  total flux cleaned = 0.00215385 Jy
! Component: 1300  -  total flux cleaned = 0.00224307 Jy
! Component: 1350  -  total flux cleaned = 0.0022962 Jy
! Component: 1400  -  total flux cleaned = 0.00236616 Jy
! Component: 1450  -  total flux cleaned = 0.00250376 Jy
! Component: 1500  -  total flux cleaned = 0.002623 Jy
! Component: 1550  -  total flux cleaned = 0.00267328 Jy
! Component: 1600  -  total flux cleaned = 0.00280699 Jy
! Component: 1650  -  total flux cleaned = 0.00288945 Jy
! Component: 1700  -  total flux cleaned = 0.00298747 Jy
! Component: 1750  -  total flux cleaned = 0.00306832 Jy
! Component: 1800  -  total flux cleaned = 0.00308401 Jy
! Component: 1850  -  total flux cleaned = 0.00313164 Jy
! Component: 1900  -  total flux cleaned = 0.00321013 Jy
! Component: 1950  -  total flux cleaned = 0.00328773 Jy
! Component: 2000  -  total flux cleaned = 0.00336468 Jy
! Component: 2050  -  total flux cleaned = 0.00342558 Jy
! Component: 2100  -  total flux cleaned = 0.00347075 Jy
! Component: 2150  -  total flux cleaned = 0.00348582 Jy
! Component: 2200  -  total flux cleaned = 0.00357453 Jy
! Component: 2250  -  total flux cleaned = 0.00358904 Jy
! Component: 2300  -  total flux cleaned = 0.00364704 Jy
! Component: 2350  -  total flux cleaned = 0.00366165 Jy
! Component: 2400  -  total flux cleaned = 0.00376139 Jy
! Component: 2450  -  total flux cleaned = 0.00380361 Jy
! Component: 2500  -  total flux cleaned = 0.00378939 Jy
! Component: 2550  -  total flux cleaned = 0.00385885 Jy
! Component: 2600  -  total flux cleaned = 0.00388638 Jy
! Component: 2650  -  total flux cleaned = 0.00388638 Jy
! Component: 2700  -  total flux cleaned = 0.00390012 Jy
! Component: 2750  -  total flux cleaned = 0.0039272 Jy
! Component: 2800  -  total flux cleaned = 0.00400714 Jy
! Component: 2850  -  total flux cleaned = 0.00404679 Jy
! Component: 2900  -  total flux cleaned = 0.00408611 Jy
! Component: 2950  -  total flux cleaned = 0.00413815 Jy
! Component: 3000  -  total flux cleaned = 0.00415117 Jy
! Component: 3050  -  total flux cleaned = 0.00420234 Jy
! Component: 3100  -  total flux cleaned = 0.00425306 Jy
! Component: 3150  -  total flux cleaned = 0.00430331 Jy
! Component: 3200  -  total flux cleaned = 0.00429105 Jy
! Component: 3250  -  total flux cleaned = 0.00435318 Jy
! Component: 3300  -  total flux cleaned = 0.00439001 Jy
! Component: 3350  -  total flux cleaned = 0.00442677 Jy
! Component: 3400  -  total flux cleaned = 0.00443893 Jy
! Component: 3450  -  total flux cleaned = 0.00451112 Jy
! Component: 3500  -  total flux cleaned = 0.00454695 Jy
! Component: 3550  -  total flux cleaned = 0.00458254 Jy
! Component: 3600  -  total flux cleaned = 0.00466475 Jy
! Component: 3650  -  total flux cleaned = 0.00472308 Jy
! Component: 3700  -  total flux cleaned = 0.0046884 Jy
! Component: 3750  -  total flux cleaned = 0.00478045 Jy
! Component: 3800  -  total flux cleaned = 0.00475757 Jy
! Component: 3850  -  total flux cleaned = 0.00479161 Jy
! Component: 3900  -  total flux cleaned = 0.00490419 Jy
! Component: 3950  -  total flux cleaned = 0.00492652 Jy
! Component: 4000  -  total flux cleaned = 0.00491539 Jy
! Component: 4050  -  total flux cleaned = 0.00494851 Jy
! Total flux subtracted in 4096 components = 0.00498139 Jy
! Clean residual min=-0.000599 max=0.000608 Jy/beam
! Clean residual mean=0.000007 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.135303 Jy
keep
! Adding 294 model components to the UV plane model.
! The established model now contains 363 components and 0.135303 Jy
![Exited script file: muppet]
wmap "J1019-2708_S_2014_05_31_pus\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.99 x 14.47 at 15.88 degrees (North through East)
! Clean map  min=-0.0013697  max=0.11499 Jy/beam
! Writing clean map to FITS file: J1019-2708_S_2014_05_31_pus_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.114989 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000213987 
device "J1019-2708_S_2014_05_31_pus\_map.eps/VPS"
! Attempting to open device: 'J1019-2708_S_2014_05_31_pus_map.eps/VPS'
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.558281 0.558281 1.11656 2.23312 4.46625 8.93249 17.865 35.73 71.4599
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0006 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.114 
mapcolor none
! Mapplot colormap: none, contrast: 1 brightness: 0.5.
mapplot cln
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.99 x 14.47 at 15.88 degrees (North through East)
! Clean map  min=-0.0013697  max=0.11499 Jy/beam
quit
! Quitting program
! Log file J1019-2708_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:22:23 2016