! Started logfile: J0653-1929_S_2014_05_31_pus_uvs.log on Mon Nov 28 15:18:09 2016 obs J0653-1929_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0653-1929_S_2014_05_31_pus_uva.fits ! AN table 1: 72 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.780247 visibilities/baseline/integration-bin. ! Found source: J0653-1929 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 10112 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0653-1929_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 81 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.866947Jy sigma=0.008401 ! Fit after self-cal, rms=0.843243Jy sigma=0.008179 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.141 mas, bmaj=11.67 mas, bpa=17.59 degrees ! Estimated noise=1186.37 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124512 Jy ! Component: 100 - total flux cleaned = 0.151664 Jy ! Total flux subtracted in 100 components = 0.151664 Jy ! Clean residual min=-0.004554 max=0.007574 Jy/beam ! Clean residual mean=-0.000002 rms=0.001288 Jy/beam ! Combined flux in latest and established models = 0.151664 Jy ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 0.151664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088396Jy sigma=0.000800 ! Fit after self-cal, rms=0.088392Jy sigma=0.000800 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.932 mas, bmaj=13.02 mas, bpa=14.67 degrees ! Estimated noise=737.357 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00856528 Jy ! Component: 100 - total flux cleaned = 0.0131867 Jy ! Component: 150 - total flux cleaned = 0.0161003 Jy ! Component: 200 - total flux cleaned = 0.0180029 Jy ! Total flux subtracted in 200 components = 0.0180029 Jy ! Clean residual min=-0.003161 max=0.003086 Jy/beam ! Clean residual mean=0.000010 rms=0.000832 Jy/beam ! Combined flux in latest and established models = 0.169667 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.169667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087454Jy sigma=0.000792 ! Fit after self-cal, rms=0.087474Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.85 HN 1.00 KP 1.05 ! LA 1.19 MK 1.00* NL 1.01 OV 1.00 ! PT 1.03 SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.99 HN 1.06 KP 1.02 ! LA 1.13 MK 1.00* NL 1.04 OV 1.00 ! PT 1.01 SC 1.04 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.12 HN 1.04 KP 0.90 ! LA 0.90 MK 1.00* NL 0.95 OV 0.95 ! PT 0.96 SC 1.03 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.02 KP 0.88 ! LA 0.87 MK 1.00* NL 1.04 OV 0.96 ! PT 0.96 SC 0.97 ! ! ! Fit before self-cal, rms=0.087474Jy sigma=0.000792 ! Fit after self-cal, rms=0.084686Jy sigma=0.000775 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.944 mas, bmaj=13.09 mas, bpa=14.66 degrees ! Estimated noise=734.563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000164118 Jy ! Component: 100 - total flux cleaned = -0.000315044 Jy ! Component: 150 - total flux cleaned = -0.000315211 Jy ! Component: 200 - total flux cleaned = -0.000315851 Jy ! Total flux subtracted in 200 components = -0.000315851 Jy ! Clean residual min=-0.002565 max=0.002399 Jy/beam ! Clean residual mean=0.000007 rms=0.000611 Jy/beam ! Combined flux in latest and established models = 0.169351 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 51 components and 0.169351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084671Jy sigma=0.000775 ! Fit after self-cal, rms=0.084677Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084677Jy sigma=0.000774 ! Fit after self-cal, rms=0.084740Jy sigma=0.000774 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.946 mas, bmaj=13.11 mas, bpa=14.69 degrees ! Estimated noise=734.125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000233802 Jy ! Component: 100 - total flux cleaned = -0.00033196 Jy ! Component: 150 - total flux cleaned = -0.00034713 Jy ! Component: 200 - total flux cleaned = -0.000346577 Jy ! Total flux subtracted in 200 components = -0.000346577 Jy ! Clean residual min=-0.002538 max=0.002405 Jy/beam ! Clean residual mean=0.000007 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 0.169004 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 56 components and 0.169004 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084731Jy sigma=0.000774 ! Fit after self-cal, rms=0.084731Jy sigma=0.000774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.13717e-05 Jy ! Component: 100 - total flux cleaned = 0.000108397 Jy ! Component: 150 - total flux cleaned = 0.000107708 Jy ! Component: 200 - total flux cleaned = 9.7501e-05 Jy ! Total flux subtracted in 200 components = 9.7501e-05 Jy ! Clean residual min=-0.002529 max=0.002413 Jy/beam ! Clean residual mean=0.000007 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 0.169102 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.169102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084727Jy sigma=0.000774 ! Fit after self-cal, rms=0.084726Jy sigma=0.000774 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084726Jy sigma=0.000774 ! Fit after self-cal, rms=0.085010Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.946 mas, bmaj=13.09 mas, bpa=14.67 degrees ! Estimated noise=734.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000117812 Jy ! Component: 100 - total flux cleaned = -0.000116933 Jy ! Component: 150 - total flux cleaned = -9.99993e-05 Jy ! Component: 200 - total flux cleaned = -9.98513e-05 Jy ! Total flux subtracted in 200 components = -9.98513e-05 Jy ! Clean residual min=-0.002501 max=0.002316 Jy/beam ! Clean residual mean=0.000003 rms=0.000545 Jy/beam ! Combined flux in latest and established models = 0.169002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 75 components and 0.169002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085000Jy sigma=0.000773 ! Fit after self-cal, rms=0.085008Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.17534e-05 Jy ! Component: 100 - total flux cleaned = -3.28712e-05 Jy ! Component: 150 - total flux cleaned = -5.44424e-05 Jy ! Component: 200 - total flux cleaned = -6.45547e-05 Jy ! Total flux subtracted in 200 components = -6.45547e-05 Jy ! Clean residual min=-0.002466 max=0.002318 Jy/beam ! Clean residual mean=0.000003 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.168938 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 88 components and 0.168937 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085005Jy sigma=0.000773 ! Fit after self-cal, rms=0.085003Jy sigma=0.000773 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085003Jy sigma=0.000773 ! Fit after self-cal, rms=0.085106Jy sigma=0.000773 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=18.01 mas, bpa=4.857 degrees ! Estimated noise=827.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000268063 Jy ! Component: 100 - total flux cleaned = -0.000314377 Jy ! Component: 150 - total flux cleaned = -0.000338528 Jy ! Component: 200 - total flux cleaned = -0.000348778 Jy ! Total flux subtracted in 200 components = -0.000348778 Jy ! Clean residual min=-0.002337 max=0.002260 Jy/beam ! Clean residual mean=0.000004 rms=0.000653 Jy/beam ! Combined flux in latest and established models = 0.168589 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 95 components and 0.168589 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085103Jy sigma=0.000773 ! Fit after self-cal, rms=0.085103Jy sigma=0.000773 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.88087e-05 Jy ! Component: 100 - total flux cleaned = 6.86155e-05 Jy ! Component: 150 - total flux cleaned = 5.96003e-05 Jy ! Component: 200 - total flux cleaned = 5.17033e-05 Jy ! Total flux subtracted in 200 components = 5.17033e-05 Jy ! Clean residual min=-0.002311 max=0.002269 Jy/beam ! Clean residual mean=0.000004 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.16864 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.16864 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085103Jy sigma=0.000773 ! Fit after self-cal, rms=0.085101Jy sigma=0.000773 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=13.09 mas, bpa=14.71 degrees ! Estimated noise=734.191 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 13.09 at 14.71 degrees (North through East) ! Clean map min=-0.0023451 max=0.15614 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.138 mas, bmaj=11.71 mas, bpa=17.58 degrees ! Estimated noise=1186.26 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.124443 Jy ! Component: 100 - total flux cleaned = 0.151603 Jy ! Component: 150 - total flux cleaned = 0.158944 Jy ! Component: 200 - total flux cleaned = 0.162058 Jy ! Total flux subtracted in 200 components = 0.162058 Jy ! Clean residual min=-0.003049 max=0.003080 Jy/beam ! Clean residual mean=0.000001 rms=0.000784 Jy/beam ! Combined flux in latest and established models = 0.162058 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.162058 Jy ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=13.09 mas, bpa=14.71 degrees ! Estimated noise=734.191 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00277259 Jy ! Component: 100 - total flux cleaned = 0.00426929 Jy ! Component: 150 - total flux cleaned = 0.00519037 Jy ! Component: 200 - total flux cleaned = 0.00577482 Jy ! Total flux subtracted in 200 components = 0.00577482 Jy ! Clean residual min=-0.002314 max=0.002345 Jy/beam ! Clean residual mean=0.000002 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.167832 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 36 components and 0.167832 Jy ! Inverting map ! Added new window around map position (-40, -128). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205566 Jy ! Component: 100 - total flux cleaned = 0.00244885 Jy ! Component: 150 - total flux cleaned = 0.00282514 Jy ! Component: 200 - total flux cleaned = 0.00322349 Jy ! Total flux subtracted in 200 components = 0.00322349 Jy ! Clean residual min=-0.002216 max=0.001901 Jy/beam ! Clean residual mean=-0.000001 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.171056 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 50 components and 0.171056 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=18.01 mas, bpa=4.857 degrees ! Estimated noise=827.038 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835477 Jy ! Component: 100 - total flux cleaned = 0.00114962 Jy ! Component: 150 - total flux cleaned = 0.0012749 Jy ! Component: 200 - total flux cleaned = 0.00134387 Jy ! Total flux subtracted in 200 components = 0.00134387 Jy ! Clean residual min=-0.002110 max=0.001900 Jy/beam ! Clean residual mean=-0.000000 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 0.1724 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.90811e-05 Jy ! Component: 100 - total flux cleaned = 0.000100293 Jy ! Component: 150 - total flux cleaned = 0.00013556 Jy ! Component: 200 - total flux cleaned = 0.000180298 Jy ! Total flux subtracted in 200 components = 0.000180298 Jy ! Clean residual min=-0.002092 max=0.001897 Jy/beam ! Clean residual mean=-0.000000 rms=0.000568 Jy/beam ! Combined flux in latest and established models = 0.17258 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 73 components and 0.17258 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.945 mas, bmaj=13.09 mas, bpa=14.71 degrees ! Estimated noise=734.191 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000175217 Jy ! Component: 100 - total flux cleaned = -2.77826e-05 Jy ! Component: 150 - total flux cleaned = 8.21273e-05 Jy ! Component: 200 - total flux cleaned = 0.000182092 Jy ! Total flux subtracted in 200 components = 0.000182092 Jy ! Clean residual min=-0.002124 max=0.001864 Jy/beam ! Clean residual mean=-0.000001 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.172762 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 93 components and 0.172762 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085049Jy sigma=0.000772 ! Fit after self-cal, rms=0.085041Jy sigma=0.000772 wmodel J0653-1929_S_2014_05_31_pus_map.mod ! Writing 93 model components to file: J0653-1929_S_2014_05_31_pus_map.mod wobs J0653-1929_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0653-1929_S_2014_05_31_pus_uvs.fits wwins J0653-1929_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J0653-1929_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000361934 Jy ! Component: 100 - total flux cleaned = -0.000232712 Jy ! Component: 150 - total flux cleaned = 6.78505e-05 Jy ! Component: 200 - total flux cleaned = 0.000240287 Jy ! Component: 250 - total flux cleaned = 0.000295226 Jy ! Component: 300 - total flux cleaned = 0.000374453 Jy ! Component: 350 - total flux cleaned = 0.000451753 Jy ! Component: 400 - total flux cleaned = 0.000501444 Jy ! Component: 450 - total flux cleaned = 0.000597221 Jy ! Component: 500 - total flux cleaned = 0.000714332 Jy ! Component: 550 - total flux cleaned = 0.000850841 Jy ! Component: 600 - total flux cleaned = 0.000983911 Jy ! Component: 650 - total flux cleaned = 0.00111439 Jy ! Component: 700 - total flux cleaned = 0.00124075 Jy ! Component: 750 - total flux cleaned = 0.0013645 Jy ! Component: 800 - total flux cleaned = 0.00150555 Jy ! Component: 850 - total flux cleaned = 0.00162417 Jy ! Component: 900 - total flux cleaned = 0.00174045 Jy ! Component: 950 - total flux cleaned = 0.00187437 Jy ! Component: 1000 - total flux cleaned = 0.00198693 Jy ! Component: 1050 - total flux cleaned = 0.0021165 Jy ! Component: 1100 - total flux cleaned = 0.00209808 Jy ! Component: 1150 - total flux cleaned = 0.00229566 Jy ! Component: 1200 - total flux cleaned = 0.00234832 Jy ! Component: 1250 - total flux cleaned = 0.00233102 Jy ! Component: 1300 - total flux cleaned = 0.00245125 Jy ! Component: 1350 - total flux cleaned = 0.00238288 Jy ! Component: 1400 - total flux cleaned = 0.00236638 Jy ! Component: 1450 - total flux cleaned = 0.00235001 Jy ! Component: 1500 - total flux cleaned = 0.0023503 Jy ! Component: 1550 - total flux cleaned = 0.00235059 Jy ! Component: 1600 - total flux cleaned = 0.00238258 Jy ! Component: 1650 - total flux cleaned = 0.00236653 Jy ! Component: 1700 - total flux cleaned = 0.002351 Jy ! Component: 1750 - total flux cleaned = 0.00236682 Jy ! Component: 1800 - total flux cleaned = 0.00233597 Jy ! Component: 1850 - total flux cleaned = 0.00230564 Jy ! Component: 1900 - total flux cleaned = 0.00230576 Jy ! Component: 1950 - total flux cleaned = 0.0022761 Jy ! Component: 2000 - total flux cleaned = 0.00224688 Jy ! Component: 2050 - total flux cleaned = 0.00226145 Jy ! Component: 2100 - total flux cleaned = 0.0022037 Jy ! Component: 2150 - total flux cleaned = 0.00216094 Jy ! Component: 2200 - total flux cleaned = 0.00218915 Jy ! Component: 2250 - total flux cleaned = 0.00214707 Jy ! Component: 2300 - total flux cleaned = 0.00218869 Jy ! Component: 2350 - total flux cleaned = 0.00218869 Jy ! Component: 2400 - total flux cleaned = 0.00218857 Jy ! Component: 2450 - total flux cleaned = 0.0022155 Jy ! Component: 2500 - total flux cleaned = 0.00221536 Jy ! Component: 2550 - total flux cleaned = 0.00221546 Jy ! Component: 2600 - total flux cleaned = 0.00222863 Jy ! Component: 2650 - total flux cleaned = 0.0022416 Jy ! Component: 2700 - total flux cleaned = 0.00222861 Jy ! Component: 2750 - total flux cleaned = 0.00224162 Jy ! Component: 2800 - total flux cleaned = 0.00230529 Jy ! Component: 2850 - total flux cleaned = 0.00229276 Jy ! Component: 2900 - total flux cleaned = 0.00235552 Jy ! Component: 2950 - total flux cleaned = 0.00234287 Jy ! Component: 3000 - total flux cleaned = 0.00237977 Jy ! Component: 3050 - total flux cleaned = 0.0024288 Jy ! Component: 3100 - total flux cleaned = 0.00246513 Jy ! Component: 3150 - total flux cleaned = 0.00248927 Jy ! Component: 3200 - total flux cleaned = 0.00253709 Jy ! Component: 3250 - total flux cleaned = 0.00257262 Jy ! Component: 3300 - total flux cleaned = 0.00263161 Jy ! Component: 3350 - total flux cleaned = 0.00269006 Jy ! Component: 3400 - total flux cleaned = 0.00274808 Jy ! Component: 3450 - total flux cleaned = 0.00279415 Jy ! Component: 3500 - total flux cleaned = 0.0028512 Jy ! Component: 3550 - total flux cleaned = 0.00290796 Jy ! Component: 3600 - total flux cleaned = 0.00295312 Jy ! Component: 3650 - total flux cleaned = 0.00297554 Jy ! Component: 3700 - total flux cleaned = 0.0030755 Jy ! Component: 3750 - total flux cleaned = 0.00313057 Jy ! Component: 3800 - total flux cleaned = 0.00316326 Jy ! Component: 3850 - total flux cleaned = 0.00320678 Jy ! Component: 3900 - total flux cleaned = 0.00331478 Jy ! Component: 3950 - total flux cleaned = 0.00333627 Jy ! Component: 4000 - total flux cleaned = 0.00336823 Jy ! Component: 4050 - total flux cleaned = 0.00341063 Jy ! Total flux subtracted in 4096 components = 0.00346312 Jy ! Clean residual min=-0.000622 max=0.000663 Jy/beam ! Clean residual mean=-0.000002 rms=0.000205 Jy/beam ! Combined flux in latest and established models = 0.176225 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 359 components and 0.176225 Jy ![Exited script file: muppet] wmap "J0653-1929_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 13.09 at 14.71 degrees (North through East) ! Clean map min=-0.0018507 max=0.15659 Jy/beam ! Writing clean map to FITS file: J0653-1929_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.156589 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000204391 device "J0653-1929_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0653-1929_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.39158 0.39158 0.78316 1.56632 3.13264 6.26528 12.5306 25.0611 50.1222 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.156 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.945 x 13.09 at 14.71 degrees (North through East) ! Clean map min=-0.0018507 max=0.15659 Jy/beam quit ! Quitting program ! Log file J0653-1929_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 15:18:15 2016