! Started logfile: J0640-1253_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:48:50 2016 obs J0640-1253_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0640-1253_S_2014_05_31_pus_uva.fits ! AN table 1: 123 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979946 visibilities/baseline/integration-bin. ! Found source: J0640-1253 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 21696 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0640-1253_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 16 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 141 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 80 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.090211Jy sigma=0.009724 ! Fit after self-cal, rms=1.012357Jy sigma=0.009243 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.139 mas, bmaj=9.533 mas, bpa=14.96 degrees ! Estimated noise=939.095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0429978 Jy ! Component: 100 - total flux cleaned = 0.0549385 Jy ! Total flux subtracted in 100 components = 0.0549385 Jy ! Clean residual min=-0.004367 max=0.005969 Jy/beam ! Clean residual mean=0.000003 rms=0.001045 Jy/beam ! Combined flux in latest and established models = 0.0549385 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.0549385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.440229Jy sigma=0.000781 ! Fit after self-cal, rms=0.439978Jy sigma=0.000772 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00572956 Jy ! Component: 100 - total flux cleaned = 0.00629407 Jy ! Total flux subtracted in 100 components = 0.00629407 Jy ! Clean residual min=-0.004682 max=0.005306 Jy/beam ! Clean residual mean=0.000000 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.0612326 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 17 components and 0.0612326 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438999Jy sigma=0.000769 ! Fit after self-cal, rms=0.439009Jy sigma=0.000769 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.904 mas, bmaj=11.21 mas, bpa=13.86 degrees ! Estimated noise=555.043 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.5, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00522278 Jy ! Component: 100 - total flux cleaned = 0.0076191 Jy ! Component: 150 - total flux cleaned = 0.00814337 Jy ! Component: 200 - total flux cleaned = 0.00827318 Jy ! Total flux subtracted in 200 components = 0.00827318 Jy ! Clean residual min=-0.002826 max=0.002844 Jy/beam ! Clean residual mean=-0.000005 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.0695058 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 0.0695058 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.438245Jy sigma=0.000767 ! Fit after self-cal, rms=0.438220Jy sigma=0.000767 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.82 HN 1.08 KP 1.02 ! LA 1.13 MK 0.19 NL 1.01 OV 1.02 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 0.99 HN 1.09 KP 1.05 ! LA 1.13 MK 1.00* NL 0.97 OV 1.05 ! PT 0.97 SC 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.09 HN 1.07 KP 0.92 ! LA 0.91 MK 0.27 NL 0.90 OV 0.95 ! PT 0.99 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 1.00 HN 1.03 KP 0.92 ! LA 0.88 MK 0.18 NL 1.03 OV 0.94 ! PT 1.02 SC 1.00 ! ! ! Fit before self-cal, rms=0.438220Jy sigma=0.000767 ! Fit after self-cal, rms=0.110418Jy sigma=0.000762 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.775 mas, bmaj=9.781 mas, bpa=9.917 degrees ! Estimated noise=540.808 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212554 Jy ! Component: 100 - total flux cleaned = 0.00263814 Jy ! Component: 150 - total flux cleaned = 0.00276289 Jy ! Component: 200 - total flux cleaned = 0.00276375 Jy ! Total flux subtracted in 200 components = 0.00276375 Jy ! Clean residual min=-0.002185 max=0.002462 Jy/beam ! Clean residual mean=-0.000005 rms=0.000513 Jy/beam ! Combined flux in latest and established models = 0.0722695 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 53 components and 0.0722695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.110356Jy sigma=0.000761 ! Fit after self-cal, rms=0.109652Jy sigma=0.000760 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109652Jy sigma=0.000760 ! Fit after self-cal, rms=0.102680Jy sigma=0.000760 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.735 mas, bmaj=9.592 mas, bpa=9.382 degrees ! Estimated noise=538.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00153452 Jy ! Component: 100 - total flux cleaned = 0.00179449 Jy ! Component: 150 - total flux cleaned = 0.0018309 Jy ! Component: 200 - total flux cleaned = 0.00176556 Jy ! Total flux subtracted in 200 components = 0.00176556 Jy ! Clean residual min=-0.002237 max=0.002245 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0740351 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 65 components and 0.0740351 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102635Jy sigma=0.000759 ! Fit after self-cal, rms=0.102497Jy sigma=0.000759 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000554041 Jy ! Component: 100 - total flux cleaned = 0.000515937 Jy ! Component: 150 - total flux cleaned = 0.000482553 Jy ! Component: 200 - total flux cleaned = 0.000422284 Jy ! Total flux subtracted in 200 components = 0.000422284 Jy ! Clean residual min=-0.002241 max=0.002235 Jy/beam ! Clean residual mean=-0.000005 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 0.0744573 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 71 components and 0.0744573 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102467Jy sigma=0.000759 ! Fit after self-cal, rms=0.102449Jy sigma=0.000759 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102449Jy sigma=0.000759 ! Fit after self-cal, rms=0.099570Jy sigma=0.000758 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.714 mas, bmaj=9.507 mas, bpa=9.117 degrees ! Estimated noise=534.676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000757212 Jy ! Component: 100 - total flux cleaned = 0.00102219 Jy ! Component: 150 - total flux cleaned = 0.00104956 Jy ! Component: 200 - total flux cleaned = 0.00102322 Jy ! Total flux subtracted in 200 components = 0.00102322 Jy ! Clean residual min=-0.002183 max=0.002269 Jy/beam ! Clean residual mean=-0.000004 rms=0.000468 Jy/beam ! Combined flux in latest and established models = 0.0754806 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 81 components and 0.0754806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099542Jy sigma=0.000758 ! Fit after self-cal, rms=0.099501Jy sigma=0.000758 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-21, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00211072 Jy ! Component: 100 - total flux cleaned = 0.00332395 Jy ! Component: 150 - total flux cleaned = 0.00391805 Jy ! Component: 200 - total flux cleaned = 0.00435397 Jy ! Total flux subtracted in 200 components = 0.00435397 Jy ! Clean residual min=-0.001979 max=0.001727 Jy/beam ! Clean residual mean=-0.000002 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0798345 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 102 components and 0.0798345 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099444Jy sigma=0.000757 ! Fit after self-cal, rms=0.099425Jy sigma=0.000757 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099425Jy sigma=0.000757 ! Fit after self-cal, rms=0.098232Jy sigma=0.000757 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.67 mas, bmaj=15.3 mas, bpa=3.556 degrees ! Estimated noise=607.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00110821 Jy ! Component: 100 - total flux cleaned = 0.00177964 Jy ! Component: 150 - total flux cleaned = 0.00204778 Jy ! Component: 200 - total flux cleaned = 0.00224571 Jy ! Total flux subtracted in 200 components = 0.00224571 Jy ! Clean residual min=-0.001893 max=0.001392 Jy/beam ! Clean residual mean=-0.000003 rms=0.000443 Jy/beam ! Combined flux in latest and established models = 0.0820802 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 128 components and 0.0820802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098221Jy sigma=0.000757 ! Fit after self-cal, rms=0.098215Jy sigma=0.000757 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000445914 Jy ! Component: 100 - total flux cleaned = 0.000572186 Jy ! Component: 150 - total flux cleaned = 0.000613764 Jy ! Component: 200 - total flux cleaned = 0.000651302 Jy ! Total flux subtracted in 200 components = 0.000651302 Jy ! Clean residual min=-0.001862 max=0.001343 Jy/beam ! Clean residual mean=-0.000003 rms=0.000439 Jy/beam ! Combined flux in latest and established models = 0.0827315 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 136 components and 0.0827315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098211Jy sigma=0.000757 ! Fit after self-cal, rms=0.098200Jy sigma=0.000757 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=9.456 mas, bpa=8.984 degrees ! Estimated noise=531.663 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 9.456 at 8.984 degrees (North through East) ! Clean map min=-0.0022064 max=0.052535 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.959 mas, bmaj=7.503 mas, bpa=7.999 degrees ! Estimated noise=849.271 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0402788 Jy ! Component: 100 - total flux cleaned = 0.0524096 Jy ! Component: 150 - total flux cleaned = 0.0593651 Jy ! Component: 200 - total flux cleaned = 0.0642665 Jy ! Total flux subtracted in 200 components = 0.0642665 Jy ! Clean residual min=-0.003275 max=0.003167 Jy/beam ! Clean residual mean=0.000003 rms=0.000747 Jy/beam ! Combined flux in latest and established models = 0.0642665 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.0642665 Jy ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=9.456 mas, bpa=8.984 degrees ! Estimated noise=531.663 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00470382 Jy ! Component: 100 - total flux cleaned = 0.00811899 Jy ! Component: 150 - total flux cleaned = 0.0108214 Jy ! Component: 200 - total flux cleaned = 0.0123604 Jy ! Total flux subtracted in 200 components = 0.0123604 Jy ! Clean residual min=-0.002644 max=0.002117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000506 Jy/beam ! Combined flux in latest and established models = 0.0766269 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 55 components and 0.0766269 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.67 mas, bmaj=15.3 mas, bpa=3.556 degrees ! Estimated noise=607.031 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205415 Jy ! Component: 100 - total flux cleaned = 0.00342303 Jy ! Component: 150 - total flux cleaned = 0.0041469 Jy ! Component: 200 - total flux cleaned = 0.00474075 Jy ! Total flux subtracted in 200 components = 0.00474075 Jy ! Clean residual min=-0.002286 max=0.001624 Jy/beam ! Clean residual mean=-0.000002 rms=0.000483 Jy/beam ! Combined flux in latest and established models = 0.0813677 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000284256 Jy ! Component: 100 - total flux cleaned = 0.000533477 Jy ! Component: 150 - total flux cleaned = 0.000681517 Jy ! Component: 200 - total flux cleaned = 0.000817739 Jy ! Total flux subtracted in 200 components = 0.000817739 Jy ! Clean residual min=-0.002128 max=0.001509 Jy/beam ! Clean residual mean=-0.000002 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.0821854 Jy ! Adding 64 model components to the UV plane model. ! The established model now contains 117 components and 0.0821855 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.695 mas, bmaj=9.456 mas, bpa=8.984 degrees ! Estimated noise=531.663 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.79515e-05 Jy ! Component: 100 - total flux cleaned = 7.795e-05 Jy ! Component: 150 - total flux cleaned = 0.000275588 Jy ! Component: 200 - total flux cleaned = 0.000411941 Jy ! Total flux subtracted in 200 components = 0.000411941 Jy ! Clean residual min=-0.001991 max=0.001697 Jy/beam ! Clean residual mean=-0.000001 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0825974 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 133 components and 0.0825974 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098360Jy sigma=0.000757 ! Fit after self-cal, rms=0.098456Jy sigma=0.000757 wmodel J0640-1253_S_2014_05_31_pus_map.mod ! Writing 133 model components to file: J0640-1253_S_2014_05_31_pus_map.mod wobs J0640-1253_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0640-1253_S_2014_05_31_pus_uvs.fits wwins J0640-1253_S_2014_05_31_pus_map.win ! wwins: Wrote 4 windows to J0640-1253_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000416566 Jy ! Component: 100 - total flux cleaned = -0.000362487 Jy ! Component: 150 - total flux cleaned = -0.00023438 Jy ! Component: 200 - total flux cleaned = -0.000283706 Jy ! Component: 250 - total flux cleaned = -0.000260085 Jy ! Component: 300 - total flux cleaned = -0.000191128 Jy ! Component: 350 - total flux cleaned = -1.30528e-05 Jy ! Component: 400 - total flux cleaned = 9.51079e-05 Jy ! Component: 450 - total flux cleaned = 0.000244224 Jy ! Component: 500 - total flux cleaned = 0.000431219 Jy ! Component: 550 - total flux cleaned = 0.000613779 Jy ! Component: 600 - total flux cleaned = 0.000773279 Jy ! Component: 650 - total flux cleaned = 0.000968747 Jy ! Component: 700 - total flux cleaned = 0.00117951 Jy ! Component: 750 - total flux cleaned = 0.00132987 Jy ! Component: 800 - total flux cleaned = 0.00151542 Jy ! Component: 850 - total flux cleaned = 0.00173463 Jy ! Component: 900 - total flux cleaned = 0.0019146 Jy ! Component: 950 - total flux cleaned = 0.00212732 Jy ! Component: 1000 - total flux cleaned = 0.00230156 Jy ! Component: 1050 - total flux cleaned = 0.00245609 Jy ! Component: 1100 - total flux cleaned = 0.00260869 Jy ! Component: 1150 - total flux cleaned = 0.00275932 Jy ! Component: 1200 - total flux cleaned = 0.00294102 Jy ! Component: 1250 - total flux cleaned = 0.00303883 Jy ! Component: 1300 - total flux cleaned = 0.00316807 Jy ! Component: 1350 - total flux cleaned = 0.00334338 Jy ! Component: 1400 - total flux cleaned = 0.00346914 Jy ! Component: 1450 - total flux cleaned = 0.00353145 Jy ! Component: 1500 - total flux cleaned = 0.00362429 Jy ! Component: 1550 - total flux cleaned = 0.00376151 Jy ! Component: 1600 - total flux cleaned = 0.00388213 Jy ! Component: 1650 - total flux cleaned = 0.00392667 Jy ! Component: 1700 - total flux cleaned = 0.00403009 Jy ! Component: 1750 - total flux cleaned = 0.00410317 Jy ! Component: 1800 - total flux cleaned = 0.00417592 Jy ! Component: 1850 - total flux cleaned = 0.00426214 Jy ! Component: 1900 - total flux cleaned = 0.00430479 Jy ! Component: 1950 - total flux cleaned = 0.00437546 Jy ! Component: 2000 - total flux cleaned = 0.00440355 Jy ! Component: 2050 - total flux cleaned = 0.0044592 Jy ! Component: 2100 - total flux cleaned = 0.00455565 Jy ! Component: 2150 - total flux cleaned = 0.00463768 Jy ! Component: 2200 - total flux cleaned = 0.00470524 Jy ! Component: 2250 - total flux cleaned = 0.00478572 Jy ! Component: 2300 - total flux cleaned = 0.00483896 Jy ! Component: 2350 - total flux cleaned = 0.00494447 Jy ! Component: 2400 - total flux cleaned = 0.00500996 Jy ! Component: 2450 - total flux cleaned = 0.00508797 Jy ! Component: 2500 - total flux cleaned = 0.00515242 Jy ! Component: 2550 - total flux cleaned = 0.0051523 Jy ! Component: 2600 - total flux cleaned = 0.00524145 Jy ! Component: 2650 - total flux cleaned = 0.00527936 Jy ! Component: 2700 - total flux cleaned = 0.00537981 Jy ! Component: 2750 - total flux cleaned = 0.00541717 Jy ! Component: 2800 - total flux cleaned = 0.00549145 Jy ! Component: 2850 - total flux cleaned = 0.00552844 Jy ! Component: 2900 - total flux cleaned = 0.00562619 Jy ! Component: 2950 - total flux cleaned = 0.00566264 Jy ! Component: 3000 - total flux cleaned = 0.00573507 Jy ! Component: 3050 - total flux cleaned = 0.00575906 Jy ! Component: 3100 - total flux cleaned = 0.00583046 Jy ! Component: 3150 - total flux cleaned = 0.00585419 Jy ! Component: 3200 - total flux cleaned = 0.00591297 Jy ! Component: 3250 - total flux cleaned = 0.00593638 Jy ! Component: 3300 - total flux cleaned = 0.00601775 Jy ! Component: 3350 - total flux cleaned = 0.0060755 Jy ! Component: 3400 - total flux cleaned = 0.0061329 Jy ! Component: 3450 - total flux cleaned = 0.00615583 Jy ! Component: 3500 - total flux cleaned = 0.00624688 Jy ! Component: 3550 - total flux cleaned = 0.00630325 Jy ! Component: 3600 - total flux cleaned = 0.00635939 Jy ! Component: 3650 - total flux cleaned = 0.00641527 Jy ! Component: 3700 - total flux cleaned = 0.00650408 Jy ! Component: 3750 - total flux cleaned = 0.00655922 Jy ! Component: 3800 - total flux cleaned = 0.00658134 Jy ! Component: 3850 - total flux cleaned = 0.00670174 Jy ! Component: 3900 - total flux cleaned = 0.00673449 Jy ! Component: 3950 - total flux cleaned = 0.00684284 Jy ! Component: 4000 - total flux cleaned = 0.00687515 Jy ! Component: 4050 - total flux cleaned = 0.00691811 Jy ! Total flux subtracted in 4096 components = 0.00700357 Jy ! Clean residual min=-0.000561 max=0.000699 Jy/beam ! Clean residual mean=-0.000000 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.089601 Jy keep ! Adding 241 model components to the UV plane model. ! The established model now contains 374 components and 0.0896009 Jy ![Exited script file: muppet] wmap "J0640-1253_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 9.456 at 8.984 degrees (North through East) ! Clean map min=-0.0012425 max=0.051786 Jy/beam ! Writing clean map to FITS file: J0640-1253_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.051786 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000193192 device "J0640-1253_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0640-1253_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.11917 1.11917 2.23835 4.4767 8.9534 17.9068 35.8136 71.6272 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.051 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.695 x 9.456 at 8.984 degrees (North through East) ! Clean map min=-0.0012425 max=0.051786 Jy/beam quit ! Quitting program ! Log file J0640-1253_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:48:57 2016