! Started logfile: J0633-2223_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:48:31 2016 obs J0633-2223_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0633-2223_S_2014_05_31_pus_uva.fits ! AN table 1: 71 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.785603 visibilities/baseline/integration-bin. ! Found source: J0633-2223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 10040 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0633-2223_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 77 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.912363Jy sigma=0.008418 ! Fit after self-cal, rms=0.875313Jy sigma=0.008080 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.215 mas, bmaj=12.26 mas, bpa=16.22 degrees ! Estimated noise=1078.13 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0977151 Jy ! Component: 100 - total flux cleaned = 0.119835 Jy ! Total flux subtracted in 100 components = 0.119835 Jy ! Clean residual min=-0.004789 max=0.008405 Jy/beam ! Clean residual mean=-0.000015 rms=0.001470 Jy/beam ! Combined flux in latest and established models = 0.119835 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.119835 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094651Jy sigma=0.000810 ! Fit after self-cal, rms=0.094640Jy sigma=0.000810 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.949 mas, bmaj=13.72 mas, bpa=15.25 degrees ! Estimated noise=777.237 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0132747 Jy ! Component: 100 - total flux cleaned = 0.0202593 Jy ! Component: 150 - total flux cleaned = 0.0243155 Jy ! Component: 200 - total flux cleaned = 0.0268398 Jy ! Total flux subtracted in 200 components = 0.0268398 Jy ! Clean residual min=-0.003986 max=0.005200 Jy/beam ! Clean residual mean=0.000002 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 0.146675 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 51 components and 0.146675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.092848Jy sigma=0.000792 ! Fit after self-cal, rms=0.092855Jy sigma=0.000792 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.84 HN 1.00 KP 1.03 ! LA 1.19 MK 1.00* NL 0.99 OV 0.99 ! PT 0.99 SC 1.03 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 HN 1.09 KP 0.97 ! LA 1.14 MK 1.00* NL 1.04 OV 1.01 ! PT 0.98 SC 1.08 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.11 HN 1.07 KP 0.89 ! LA 0.86 MK 1.00* NL 0.98 OV 0.94 ! PT 0.96 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.97 HN 1.04 KP 0.90 ! LA 0.90 MK 1.00* NL 1.08 OV 0.98 ! PT 1.01 SC 0.97 ! ! ! Fit before self-cal, rms=0.092855Jy sigma=0.000792 ! Fit after self-cal, rms=0.091131Jy sigma=0.000781 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.971 mas, bmaj=13.85 mas, bpa=15.31 degrees ! Estimated noise=772.749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00464916 Jy ! Component: 100 - total flux cleaned = 0.00580787 Jy ! Component: 150 - total flux cleaned = 0.00658968 Jy ! Component: 200 - total flux cleaned = 0.00700068 Jy ! Total flux subtracted in 200 components = 0.00700068 Jy ! Clean residual min=-0.002475 max=0.002329 Jy/beam ! Clean residual mean=-0.000000 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.153675 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 90 components and 0.153675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090906Jy sigma=0.000779 ! Fit after self-cal, rms=0.090897Jy sigma=0.000778 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090897Jy sigma=0.000778 ! Fit after self-cal, rms=0.091110Jy sigma=0.000777 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.969 mas, bmaj=13.82 mas, bpa=15.3 degrees ! Estimated noise=771.741 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000782179 Jy ! Component: 100 - total flux cleaned = 0.00112809 Jy ! Component: 150 - total flux cleaned = 0.00129431 Jy ! Component: 200 - total flux cleaned = 0.00137678 Jy ! Total flux subtracted in 200 components = 0.00137678 Jy ! Clean residual min=-0.002118 max=0.001982 Jy/beam ! Clean residual mean=-0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.155052 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 106 components and 0.155052 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091072Jy sigma=0.000777 ! Fit after self-cal, rms=0.091077Jy sigma=0.000777 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000349083 Jy ! Component: 100 - total flux cleaned = 0.000512461 Jy ! Component: 150 - total flux cleaned = 0.000582281 Jy ! Component: 200 - total flux cleaned = 0.000646315 Jy ! Total flux subtracted in 200 components = 0.000646315 Jy ! Clean residual min=-0.002049 max=0.001910 Jy/beam ! Clean residual mean=-0.000001 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 0.155698 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 118 components and 0.155698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091060Jy sigma=0.000777 ! Fit after self-cal, rms=0.091058Jy sigma=0.000776 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091058Jy sigma=0.000776 ! Fit after self-cal, rms=0.091280Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=13.8 mas, bpa=15.35 degrees ! Estimated noise=770.501 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.28883e-05 Jy ! Component: 100 - total flux cleaned = 0.000197608 Jy ! Component: 150 - total flux cleaned = 0.000219757 Jy ! Component: 200 - total flux cleaned = 0.000218982 Jy ! Total flux subtracted in 200 components = 0.000218982 Jy ! Clean residual min=-0.001984 max=0.001912 Jy/beam ! Clean residual mean=-0.000003 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.155917 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 122 components and 0.155917 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091264Jy sigma=0.000776 ! Fit after self-cal, rms=0.091270Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000125531 Jy ! Component: 100 - total flux cleaned = 0.000204319 Jy ! Component: 150 - total flux cleaned = 0.000240958 Jy ! Component: 200 - total flux cleaned = 0.000258231 Jy ! Total flux subtracted in 200 components = 0.000258231 Jy ! Clean residual min=-0.001964 max=0.001897 Jy/beam ! Clean residual mean=-0.000002 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.156176 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 128 components and 0.156176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091261Jy sigma=0.000776 ! Fit after self-cal, rms=0.091260Jy sigma=0.000776 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091260Jy sigma=0.000776 ! Fit after self-cal, rms=0.091326Jy sigma=0.000776 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=19.48 mas, bpa=5.871 degrees ! Estimated noise=858.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.43826e-05 Jy ! Component: 100 - total flux cleaned = 7.84319e-05 Jy ! Component: 150 - total flux cleaned = 0.000119869 Jy ! Component: 200 - total flux cleaned = 0.000132473 Jy ! Total flux subtracted in 200 components = 0.000132473 Jy ! Clean residual min=-0.001960 max=0.001942 Jy/beam ! Clean residual mean=-0.000004 rms=0.000553 Jy/beam ! Combined flux in latest and established models = 0.156308 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 0.156308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091322Jy sigma=0.000776 ! Fit after self-cal, rms=0.091324Jy sigma=0.000776 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.14661e-05 Jy ! Component: 100 - total flux cleaned = 0.000119752 Jy ! Component: 150 - total flux cleaned = 0.000175467 Jy ! Component: 200 - total flux cleaned = 0.00022787 Jy ! Total flux subtracted in 200 components = 0.00022787 Jy ! Clean residual min=-0.001945 max=0.001948 Jy/beam ! Clean residual mean=-0.000004 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.156536 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 151 components and 0.156536 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091322Jy sigma=0.000776 ! Fit after self-cal, rms=0.091322Jy sigma=0.000776 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=13.81 mas, bpa=15.39 degrees ! Estimated noise=769.732 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 13.81 at 15.39 degrees (North through East) ! Clean map min=-0.0019223 max=0.12555 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.206 mas, bmaj=12.3 mas, bpa=16.39 degrees ! Estimated noise=1070.17 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0968076 Jy ! Component: 100 - total flux cleaned = 0.118866 Jy ! Component: 150 - total flux cleaned = 0.128557 Jy ! Component: 200 - total flux cleaned = 0.134613 Jy ! Total flux subtracted in 200 components = 0.134613 Jy ! Clean residual min=-0.003666 max=0.003297 Jy/beam ! Clean residual mean=-0.000014 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.134613 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.134613 Jy ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=13.81 mas, bpa=15.39 degrees ! Estimated noise=769.732 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00577175 Jy ! Component: 100 - total flux cleaned = 0.0097162 Jy ! Component: 150 - total flux cleaned = 0.0126791 Jy ! Component: 200 - total flux cleaned = 0.0148695 Jy ! Total flux subtracted in 200 components = 0.0148695 Jy ! Clean residual min=-0.002200 max=0.001942 Jy/beam ! Clean residual mean=-0.000008 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.149482 Jy ! Adding 62 model components to the UV plane model. ! The established model now contains 71 components and 0.149482 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.121 mas, bmaj=19.48 mas, bpa=5.871 degrees ! Estimated noise=858.876 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00248725 Jy ! Component: 100 - total flux cleaned = 0.00382844 Jy ! Component: 150 - total flux cleaned = 0.0046732 Jy ! Component: 200 - total flux cleaned = 0.00526041 Jy ! Total flux subtracted in 200 components = 0.00526041 Jy ! Clean residual min=-0.002052 max=0.001934 Jy/beam ! Clean residual mean=-0.000007 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.154743 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000509022 Jy ! Component: 100 - total flux cleaned = 0.000896055 Jy ! Component: 150 - total flux cleaned = 0.00110736 Jy ! Component: 200 - total flux cleaned = 0.00127181 Jy ! Total flux subtracted in 200 components = 0.00127181 Jy ! Clean residual min=-0.002007 max=0.001964 Jy/beam ! Clean residual mean=-0.000005 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 0.156014 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 157 components and 0.156014 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.968 mas, bmaj=13.81 mas, bpa=15.39 degrees ! Estimated noise=769.732 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.12364e-05 Jy ! Component: 100 - total flux cleaned = -1.54586e-05 Jy ! Component: 150 - total flux cleaned = 7.98918e-06 Jy ! Component: 200 - total flux cleaned = 7.44508e-05 Jy ! Total flux subtracted in 200 components = 7.44508e-05 Jy ! Clean residual min=-0.001950 max=0.001905 Jy/beam ! Clean residual mean=-0.000002 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.156089 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 174 components and 0.156089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091337Jy sigma=0.000776 ! Fit after self-cal, rms=0.091325Jy sigma=0.000776 wmodel J0633-2223_S_2014_05_31_pus_map.mod ! Writing 174 model components to file: J0633-2223_S_2014_05_31_pus_map.mod wobs J0633-2223_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0633-2223_S_2014_05_31_pus_uvs.fits wwins J0633-2223_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J0633-2223_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -7.4007e-05 Jy ! Component: 100 - total flux cleaned = 6.11926e-05 Jy ! Component: 150 - total flux cleaned = 0.000158409 Jy ! Component: 200 - total flux cleaned = 0.000252442 Jy ! Component: 250 - total flux cleaned = 0.000343537 Jy ! Component: 300 - total flux cleaned = 0.000343823 Jy ! Component: 350 - total flux cleaned = 0.000459422 Jy ! Component: 400 - total flux cleaned = 0.000515664 Jy ! Component: 450 - total flux cleaned = 0.000542805 Jy ! Component: 500 - total flux cleaned = 0.000515758 Jy ! Component: 550 - total flux cleaned = 0.000489842 Jy ! Component: 600 - total flux cleaned = 0.000464209 Jy ! Component: 650 - total flux cleaned = 0.000464222 Jy ! Component: 700 - total flux cleaned = 0.000414864 Jy ! Component: 750 - total flux cleaned = 0.000390588 Jy ! Component: 800 - total flux cleaned = 0.000366313 Jy ! Component: 850 - total flux cleaned = 0.000319399 Jy ! Component: 900 - total flux cleaned = 0.000250723 Jy ! Component: 950 - total flux cleaned = 0.000205867 Jy ! Component: 1000 - total flux cleaned = 0.000161783 Jy ! Component: 1050 - total flux cleaned = 0.000161729 Jy ! Component: 1100 - total flux cleaned = 0.000118681 Jy ! Component: 1150 - total flux cleaned = 5.53218e-05 Jy ! Component: 1200 - total flux cleaned = -6.68145e-06 Jy ! Component: 1250 - total flux cleaned = -8.84709e-05 Jy ! Component: 1300 - total flux cleaned = -0.000128263 Jy ! Component: 1350 - total flux cleaned = -0.000167806 Jy ! Component: 1400 - total flux cleaned = -0.0001876 Jy ! Component: 1450 - total flux cleaned = -0.000226555 Jy ! Component: 1500 - total flux cleaned = -0.000264926 Jy ! Component: 1550 - total flux cleaned = -0.000265152 Jy ! Component: 1600 - total flux cleaned = -0.000321538 Jy ! Component: 1650 - total flux cleaned = -0.000358269 Jy ! Component: 1700 - total flux cleaned = -0.000303829 Jy ! Component: 1750 - total flux cleaned = -0.000358316 Jy ! Component: 1800 - total flux cleaned = -0.000394268 Jy ! Component: 1850 - total flux cleaned = -0.000464779 Jy ! Component: 1900 - total flux cleaned = -0.000482056 Jy ! Component: 1950 - total flux cleaned = -0.000499066 Jy ! Component: 2000 - total flux cleaned = -0.00049909 Jy ! Component: 2050 - total flux cleaned = -0.000566699 Jy ! Component: 2100 - total flux cleaned = -0.000599931 Jy ! Component: 2150 - total flux cleaned = -0.000632897 Jy ! Component: 2200 - total flux cleaned = -0.000649236 Jy ! Component: 2250 - total flux cleaned = -0.000665086 Jy ! Component: 2300 - total flux cleaned = -0.000696897 Jy ! Component: 2350 - total flux cleaned = -0.000712539 Jy ! Component: 2400 - total flux cleaned = -0.000728061 Jy ! Component: 2450 - total flux cleaned = -0.000727945 Jy ! Component: 2500 - total flux cleaned = -0.000758885 Jy ! Component: 2550 - total flux cleaned = -0.000728542 Jy ! Component: 2600 - total flux cleaned = -0.000713789 Jy ! Component: 2650 - total flux cleaned = -0.000713775 Jy ! Component: 2700 - total flux cleaned = -0.000713747 Jy ! Component: 2750 - total flux cleaned = -0.000699053 Jy ! Component: 2800 - total flux cleaned = -0.000728187 Jy ! Component: 2850 - total flux cleaned = -0.000684911 Jy ! Component: 2900 - total flux cleaned = -0.000699287 Jy ! Component: 2950 - total flux cleaned = -0.00068522 Jy ! Component: 3000 - total flux cleaned = -0.000671288 Jy ! Component: 3050 - total flux cleaned = -0.000699154 Jy ! Component: 3100 - total flux cleaned = -0.000644064 Jy ! Component: 3150 - total flux cleaned = -0.0006716 Jy ! Component: 3200 - total flux cleaned = -0.000657996 Jy ! Component: 3250 - total flux cleaned = -0.000563887 Jy ! Component: 3300 - total flux cleaned = -0.000577257 Jy ! Component: 3350 - total flux cleaned = -0.000563952 Jy ! Component: 3400 - total flux cleaned = -0.000485166 Jy ! Component: 3450 - total flux cleaned = -0.000433207 Jy ! Component: 3500 - total flux cleaned = -0.000394596 Jy ! Component: 3550 - total flux cleaned = -0.000343352 Jy ! Component: 3600 - total flux cleaned = -0.000305053 Jy ! Component: 3650 - total flux cleaned = -0.000229283 Jy ! Component: 3700 - total flux cleaned = -0.000179081 Jy ! Component: 3750 - total flux cleaned = -0.000116902 Jy ! Component: 3800 - total flux cleaned = -3.05555e-05 Jy ! Component: 3850 - total flux cleaned = 4.2844e-05 Jy ! Component: 3900 - total flux cleaned = 7.93776e-05 Jy ! Component: 3950 - total flux cleaned = 0.000163865 Jy ! Component: 4000 - total flux cleaned = 0.000247539 Jy ! Component: 4050 - total flux cleaned = 0.000247516 Jy ! Total flux subtracted in 4096 components = 0.000365633 Jy ! Clean residual min=-0.000665 max=0.000790 Jy/beam ! Clean residual mean=-0.000002 rms=0.000225 Jy/beam ! Combined flux in latest and established models = 0.156454 Jy keep ! Adding 247 model components to the UV plane model. ! The established model now contains 421 components and 0.156454 Jy ![Exited script file: muppet] wmap "J0633-2223_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 13.81 at 15.39 degrees (North through East) ! Clean map min=-0.0014128 max=0.12647 Jy/beam ! Writing clean map to FITS file: J0633-2223_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.126469 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00022052 device "J0633-2223_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0633-2223_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.523099 0.523099 1.0462 2.0924 4.1848 8.36959 16.7392 33.4784 66.9567 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.126 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.968 x 13.81 at 15.39 degrees (North through East) ! Clean map min=-0.0014128 max=0.12647 Jy/beam quit ! Quitting program ! Log file J0633-2223_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:48:37 2016