! Started logfile: J0541+6745_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:46:51 2016 obs J0541+6745_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0541+6745_S_2014_05_31_pus_uva.fits ! AN table 1: 113 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.973255 visibilities/baseline/integration-bin. ! Found source: J0541+6745 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 19796 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0541+6745_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 22 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 78 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.971307Jy sigma=0.010523 ! Fit after self-cal, rms=0.940226Jy sigma=0.010301 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.956 mas, bmaj=7.792 mas, bpa=64.26 degrees ! Estimated noise=876.697 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0519478 Jy ! Component: 100 - total flux cleaned = 0.0637693 Jy ! Total flux subtracted in 100 components = 0.0637693 Jy ! Clean residual min=-0.003470 max=0.004229 Jy/beam ! Clean residual mean=-0.000006 rms=0.000880 Jy/beam ! Combined flux in latest and established models = 0.0637693 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.0637693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164271Jy sigma=0.000776 ! Fit after self-cal, rms=0.164248Jy sigma=0.000775 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.783 mas, bmaj=8.758 mas, bpa=65.84 degrees ! Estimated noise=487.038 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00571143 Jy ! Component: 100 - total flux cleaned = 0.00840098 Jy ! Component: 150 - total flux cleaned = 0.00992967 Jy ! Component: 200 - total flux cleaned = 0.0105803 Jy ! Total flux subtracted in 200 components = 0.0105803 Jy ! Clean residual min=-0.002006 max=0.001943 Jy/beam ! Clean residual mean=0.000007 rms=0.000474 Jy/beam ! Combined flux in latest and established models = 0.0743496 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 24 components and 0.0743496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163868Jy sigma=0.000771 ! Fit after self-cal, rms=0.163868Jy sigma=0.000771 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.85 HN 0.98 KP 1.01 ! LA 1.13 MK 1.03 NL 0.99 OV 0.97 ! PT 0.95 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.99 KP 0.98 ! LA 1.13 MK 1.01 NL 1.05 OV 1.03 ! PT 0.98 SC 1.06 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.15 HN 0.99 KP 0.87 ! LA 0.90 MK 0.93 NL 1.05 OV 0.96 ! PT 0.99 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 FD 1.04 HN 1.10 KP 0.93 ! LA 0.85 MK 1.05 NL 1.04 OV 1.03 ! PT 0.98 SC 1.05 ! ! ! Fit before self-cal, rms=0.163868Jy sigma=0.000771 ! Fit after self-cal, rms=0.151647Jy sigma=0.000768 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.803 mas, bmaj=8.79 mas, bpa=65.86 degrees ! Estimated noise=487.404 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000420911 Jy ! Component: 100 - total flux cleaned = -0.000451071 Jy ! Component: 150 - total flux cleaned = -0.000480583 Jy ! Component: 200 - total flux cleaned = -0.000508586 Jy ! Total flux subtracted in 200 components = -0.000508586 Jy ! Clean residual min=-0.001564 max=0.001632 Jy/beam ! Clean residual mean=0.000007 rms=0.000400 Jy/beam ! Combined flux in latest and established models = 0.073841 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 32 components and 0.073841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151558Jy sigma=0.000768 ! Fit after self-cal, rms=0.151604Jy sigma=0.000767 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151604Jy sigma=0.000767 ! Fit after self-cal, rms=0.081673Jy sigma=0.000766 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.793 mas, bmaj=8.441 mas, bpa=66.97 degrees ! Estimated noise=484.52 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.80619e-05 Jy ! Component: 100 - total flux cleaned = -7.79229e-05 Jy ! Component: 150 - total flux cleaned = -6.73701e-05 Jy ! Component: 200 - total flux cleaned = -5.81273e-05 Jy ! Total flux subtracted in 200 components = -5.81273e-05 Jy ! Clean residual min=-0.001458 max=0.001530 Jy/beam ! Clean residual mean=0.000002 rms=0.000365 Jy/beam ! Combined flux in latest and established models = 0.0737829 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0737829 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081670Jy sigma=0.000766 ! Fit after self-cal, rms=0.081607Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.66819e-06 Jy ! Component: 100 - total flux cleaned = 2.52114e-06 Jy ! Component: 150 - total flux cleaned = 1.21456e-05 Jy ! Component: 200 - total flux cleaned = 2.07099e-05 Jy ! Total flux subtracted in 200 components = 2.07099e-05 Jy ! Clean residual min=-0.001455 max=0.001526 Jy/beam ! Clean residual mean=0.000002 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0738036 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 42 components and 0.0738036 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081604Jy sigma=0.000766 ! Fit after self-cal, rms=0.081604Jy sigma=0.000766 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081604Jy sigma=0.000766 ! Fit after self-cal, rms=0.080917Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.792 mas, bmaj=8.424 mas, bpa=67.07 degrees ! Estimated noise=484.276 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.64668e-05 Jy ! Component: 100 - total flux cleaned = -8.5757e-05 Jy ! Component: 150 - total flux cleaned = -7.75226e-05 Jy ! Component: 200 - total flux cleaned = -6.98581e-05 Jy ! Total flux subtracted in 200 components = -6.98581e-05 Jy ! Clean residual min=-0.001461 max=0.001497 Jy/beam ! Clean residual mean=0.000001 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.0737337 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 44 components and 0.0737337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080915Jy sigma=0.000766 ! Fit after self-cal, rms=0.080912Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.58974e-07 Jy ! Component: 100 - total flux cleaned = 1.03867e-07 Jy ! Component: 150 - total flux cleaned = 3.50433e-07 Jy ! Component: 200 - total flux cleaned = 4.8358e-07 Jy ! Total flux subtracted in 200 components = 4.8358e-07 Jy ! Clean residual min=-0.001459 max=0.001491 Jy/beam ! Clean residual mean=0.000001 rms=0.000362 Jy/beam ! Combined flux in latest and established models = 0.0737342 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.0737342 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080910Jy sigma=0.000766 ! Fit after self-cal, rms=0.080911Jy sigma=0.000766 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080911Jy sigma=0.000766 ! Fit after self-cal, rms=0.080826Jy sigma=0.000766 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=11.45 mas, bpa=73.26 degrees ! Estimated noise=560.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000201672 Jy ! Component: 100 - total flux cleaned = 0.000143323 Jy ! Component: 150 - total flux cleaned = 0.000108075 Jy ! Component: 200 - total flux cleaned = 8.73436e-05 Jy ! Total flux subtracted in 200 components = 8.73436e-05 Jy ! Clean residual min=-0.001591 max=0.001867 Jy/beam ! Clean residual mean=0.000002 rms=0.000459 Jy/beam ! Combined flux in latest and established models = 0.0738215 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 51 components and 0.0738215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080826Jy sigma=0.000766 ! Fit after self-cal, rms=0.080826Jy sigma=0.000766 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000121002 Jy ! Component: 100 - total flux cleaned = 8.17431e-05 Jy ! Component: 150 - total flux cleaned = 7.6169e-05 Jy ! Component: 200 - total flux cleaned = 7.64504e-05 Jy ! Total flux subtracted in 200 components = 7.64504e-05 Jy ! Clean residual min=-0.001584 max=0.001857 Jy/beam ! Clean residual mean=0.000003 rms=0.000457 Jy/beam ! Combined flux in latest and established models = 0.073898 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 53 components and 0.073898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080827Jy sigma=0.000766 ! Fit after self-cal, rms=0.080827Jy sigma=0.000766 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=8.428 mas, bpa=67.09 degrees ! Estimated noise=483.873 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 8.428 at 67.09 degrees (North through East) ! Clean map min=-0.0013975 max=0.067914 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.954 mas, bmaj=7.175 mas, bpa=66.07 degrees ! Estimated noise=872.603 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0515496 Jy ! Component: 100 - total flux cleaned = 0.0633805 Jy ! Component: 150 - total flux cleaned = 0.068008 Jy ! Component: 200 - total flux cleaned = 0.0704981 Jy ! Total flux subtracted in 200 components = 0.0704981 Jy ! Clean residual min=-0.003147 max=0.002915 Jy/beam ! Clean residual mean=-0.000001 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.0704981 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.0704981 Jy ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=8.428 mas, bpa=67.09 degrees ! Estimated noise=483.873 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00230983 Jy ! Component: 100 - total flux cleaned = 0.00303174 Jy ! Component: 150 - total flux cleaned = 0.00310246 Jy ! Component: 200 - total flux cleaned = 0.00319011 Jy ! Total flux subtracted in 200 components = 0.00319011 Jy ! Clean residual min=-0.001442 max=0.001408 Jy/beam ! Clean residual mean=0.000001 rms=0.000358 Jy/beam ! Combined flux in latest and established models = 0.0736882 Jy ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 0.0736882 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.574 mas, bmaj=11.45 mas, bpa=73.26 degrees ! Estimated noise=560.693 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000427089 Jy ! Component: 100 - total flux cleaned = 0.000521151 Jy ! Component: 150 - total flux cleaned = 0.000582306 Jy ! Component: 200 - total flux cleaned = 0.00060883 Jy ! Total flux subtracted in 200 components = 0.00060883 Jy ! Clean residual min=-0.001617 max=0.001713 Jy/beam ! Clean residual mean=0.000004 rms=0.000448 Jy/beam ! Combined flux in latest and established models = 0.074297 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.18264e-05 Jy ! Component: 100 - total flux cleaned = 3.34816e-05 Jy ! Component: 150 - total flux cleaned = 5.27777e-05 Jy ! Component: 200 - total flux cleaned = 7.02024e-05 Jy ! Total flux subtracted in 200 components = 7.02024e-05 Jy ! Clean residual min=-0.001609 max=0.001683 Jy/beam ! Clean residual mean=0.000005 rms=0.000445 Jy/beam ! Combined flux in latest and established models = 0.0743672 Jy ! Adding 52 model components to the UV plane model. ! The established model now contains 81 components and 0.0743672 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.791 mas, bmaj=8.428 mas, bpa=67.09 degrees ! Estimated noise=483.873 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -4.38382e-05 Jy ! Component: 100 - total flux cleaned = -4.48036e-05 Jy ! Component: 150 - total flux cleaned = -6.09024e-05 Jy ! Component: 200 - total flux cleaned = -4.64e-05 Jy ! Total flux subtracted in 200 components = -4.64e-05 Jy ! Clean residual min=-0.001392 max=0.001358 Jy/beam ! Clean residual mean=0.000003 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.0743208 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 97 components and 0.0743208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080815Jy sigma=0.000766 ! Fit after self-cal, rms=0.080839Jy sigma=0.000766 wmodel J0541+6745_S_2014_05_31_pus_map.mod ! Writing 97 model components to file: J0541+6745_S_2014_05_31_pus_map.mod wobs J0541+6745_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0541+6745_S_2014_05_31_pus_uvs.fits wwins J0541+6745_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J0541+6745_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 5.09272e-05 Jy ! Component: 100 - total flux cleaned = 7.53612e-05 Jy ! Component: 150 - total flux cleaned = 0.000121371 Jy ! Component: 200 - total flux cleaned = 0.00020864 Jy ! Component: 250 - total flux cleaned = 0.000356004 Jy ! Component: 300 - total flux cleaned = 0.000560354 Jy ! Component: 350 - total flux cleaned = 0.000619419 Jy ! Component: 400 - total flux cleaned = 0.000736136 Jy ! Component: 450 - total flux cleaned = 0.000850907 Jy ! Component: 500 - total flux cleaned = 0.00100026 Jy ! Component: 550 - total flux cleaned = 0.00103668 Jy ! Component: 600 - total flux cleaned = 0.00110835 Jy ! Component: 650 - total flux cleaned = 0.00121361 Jy ! Component: 700 - total flux cleaned = 0.00119626 Jy ! Component: 750 - total flux cleaned = 0.00124719 Jy ! Component: 800 - total flux cleaned = 0.00123066 Jy ! Component: 850 - total flux cleaned = 0.00124699 Jy ! Component: 900 - total flux cleaned = 0.00124707 Jy ! Component: 950 - total flux cleaned = 0.00121561 Jy ! Component: 1000 - total flux cleaned = 0.00127851 Jy ! Component: 1050 - total flux cleaned = 0.00130946 Jy ! Component: 1100 - total flux cleaned = 0.00138578 Jy ! Component: 1150 - total flux cleaned = 0.00140089 Jy ! Component: 1200 - total flux cleaned = 0.00150457 Jy ! Component: 1250 - total flux cleaned = 0.00150448 Jy ! Component: 1300 - total flux cleaned = 0.00156227 Jy ! Component: 1350 - total flux cleaned = 0.00161928 Jy ! Component: 1400 - total flux cleaned = 0.00164753 Jy ! Component: 1450 - total flux cleaned = 0.00167532 Jy ! Component: 1500 - total flux cleaned = 0.00170298 Jy ! Component: 1550 - total flux cleaned = 0.00173011 Jy ! Component: 1600 - total flux cleaned = 0.00179727 Jy ! Component: 1650 - total flux cleaned = 0.0017972 Jy ! Component: 1700 - total flux cleaned = 0.00182351 Jy ! Component: 1750 - total flux cleaned = 0.00182352 Jy ! Component: 1800 - total flux cleaned = 0.00186197 Jy ! Component: 1850 - total flux cleaned = 0.00186184 Jy ! Component: 1900 - total flux cleaned = 0.00187439 Jy ! Component: 1950 - total flux cleaned = 0.00192429 Jy ! Component: 2000 - total flux cleaned = 0.00192417 Jy ! Component: 2050 - total flux cleaned = 0.00193638 Jy ! Component: 2100 - total flux cleaned = 0.00196063 Jy ! Component: 2150 - total flux cleaned = 0.00199673 Jy ! Component: 2200 - total flux cleaned = 0.00199677 Jy ! Component: 2250 - total flux cleaned = 0.00203228 Jy ! Component: 2300 - total flux cleaned = 0.00206742 Jy ! Component: 2350 - total flux cleaned = 0.00211387 Jy ! Component: 2400 - total flux cleaned = 0.00214841 Jy ! Component: 2450 - total flux cleaned = 0.00218252 Jy ! Component: 2500 - total flux cleaned = 0.00220511 Jy ! Component: 2550 - total flux cleaned = 0.00219404 Jy ! Component: 2600 - total flux cleaned = 0.00221642 Jy ! Component: 2650 - total flux cleaned = 0.00224969 Jy ! Component: 2700 - total flux cleaned = 0.00229368 Jy ! Component: 2750 - total flux cleaned = 0.00230449 Jy ! Component: 2800 - total flux cleaned = 0.00231532 Jy ! Component: 2850 - total flux cleaned = 0.00237938 Jy ! Component: 2900 - total flux cleaned = 0.00237942 Jy ! Component: 2950 - total flux cleaned = 0.00236883 Jy ! Component: 3000 - total flux cleaned = 0.00236902 Jy ! Component: 3050 - total flux cleaned = 0.00235865 Jy ! Component: 3100 - total flux cleaned = 0.00239985 Jy ! Component: 3150 - total flux cleaned = 0.00241018 Jy ! Component: 3200 - total flux cleaned = 0.00243054 Jy ! Component: 3250 - total flux cleaned = 0.0024709 Jy ! Component: 3300 - total flux cleaned = 0.00250095 Jy ! Component: 3350 - total flux cleaned = 0.002501 Jy ! Component: 3400 - total flux cleaned = 0.00249101 Jy ! Component: 3450 - total flux cleaned = 0.00255989 Jy ! Component: 3500 - total flux cleaned = 0.00256953 Jy ! Component: 3550 - total flux cleaned = 0.00260828 Jy ! Component: 3600 - total flux cleaned = 0.00259861 Jy ! Component: 3650 - total flux cleaned = 0.00264649 Jy ! Component: 3700 - total flux cleaned = 0.00267504 Jy ! Component: 3750 - total flux cleaned = 0.00273176 Jy ! Component: 3800 - total flux cleaned = 0.0027317 Jy ! Component: 3850 - total flux cleaned = 0.002769 Jy ! Component: 3900 - total flux cleaned = 0.00278756 Jy ! Component: 3950 - total flux cleaned = 0.0028429 Jy ! Component: 4000 - total flux cleaned = 0.00282452 Jy ! Component: 4050 - total flux cleaned = 0.00285192 Jy ! Total flux subtracted in 4096 components = 0.00286106 Jy ! Clean residual min=-0.000516 max=0.000507 Jy/beam ! Clean residual mean=0.000001 rms=0.000167 Jy/beam ! Combined flux in latest and established models = 0.0771819 Jy keep ! Adding 264 model components to the UV plane model. ! The established model now contains 361 components and 0.0771819 Jy ![Exited script file: muppet] wmap "J0541+6745_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 8.428 at 67.09 degrees (North through East) ! Clean map min=-0.0010842 max=0.068008 Jy/beam ! Writing clean map to FITS file: J0541+6745_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0680081 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000167281 device "J0541+6745_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0541+6745_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.737916 0.737916 1.47583 2.95166 5.90333 11.8067 23.6133 47.2266 94.4532 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.068 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.791 x 8.428 at 67.09 degrees (North through East) ! Clean map min=-0.0010842 max=0.068008 Jy/beam quit ! Quitting program ! Log file J0541+6745_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:46:56 2016