! Started logfile: J0305-2421_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:44:19 2016 obs J0305-2421_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0305-2421_S_2014_05_31_pus_uva.fits ! AN table 1: 120 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.887593 visibilities/baseline/integration-bin. ! Found source: J0305-2421 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 19172 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0305-2421_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 69 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.998759Jy sigma=0.008877 ! Fit after self-cal, rms=0.957524Jy sigma=0.008540 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.779 mas, bmaj=6.581 mas, bpa=-3.247 degrees ! Estimated noise=1023.01 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0357626 Jy ! Component: 100 - total flux cleaned = 0.0435964 Jy ! Total flux subtracted in 100 components = 0.0435964 Jy ! Clean residual min=-0.003760 max=0.003970 Jy/beam ! Clean residual mean=0.000024 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.0435964 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0435964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093174Jy sigma=0.000756 ! Fit after self-cal, rms=0.091927Jy sigma=0.000745 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.506 mas, bmaj=8.116 mas, bpa=-1.499 degrees ! Estimated noise=584.275 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395931 Jy ! Component: 100 - total flux cleaned = 0.00488442 Jy ! Component: 150 - total flux cleaned = 0.00491106 Jy ! Component: 200 - total flux cleaned = 0.0048661 Jy ! Total flux subtracted in 200 components = 0.0048661 Jy ! Clean residual min=-0.002415 max=0.002606 Jy/beam ! Clean residual mean=0.000044 rms=0.000644 Jy/beam ! Combined flux in latest and established models = 0.0484625 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0484625 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091724Jy sigma=0.000744 ! Fit after self-cal, rms=0.091706Jy sigma=0.000744 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.94 HN 0.93 KP 1.10 ! LA 1.10 MK 1.09 NL 0.98 OV 1.07 ! PT 1.07 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.86 FD 1.01 HN 1.04 KP 1.09 ! LA 1.09 MK 0.96 NL 1.05 OV 1.04 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.89 FD 1.09 HN 0.89 KP 1.03 ! LA 0.96 MK 1.00 NL 0.95 OV 0.99 ! PT 1.02 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.03 HN 0.84 KP 0.91 ! LA 0.84 MK 1.07 NL 1.01 OV 0.90 ! PT 1.08 SC 0.99 ! ! ! Fit before self-cal, rms=0.091706Jy sigma=0.000744 ! Fit after self-cal, rms=0.088238Jy sigma=0.000743 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.489 mas, bmaj=8.113 mas, bpa=-1.233 degrees ! Estimated noise=582.655 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000633623 Jy ! Component: 100 - total flux cleaned = 0.000669379 Jy ! Component: 150 - total flux cleaned = 0.000714868 Jy ! Component: 200 - total flux cleaned = 0.000742139 Jy ! Total flux subtracted in 200 components = 0.000742139 Jy ! Clean residual min=-0.002382 max=0.002121 Jy/beam ! Clean residual mean=0.000036 rms=0.000581 Jy/beam ! Combined flux in latest and established models = 0.0492047 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 0.0492047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088229Jy sigma=0.000743 ! Fit after self-cal, rms=0.088116Jy sigma=0.000742 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088116Jy sigma=0.000742 ! Fit after self-cal, rms=0.086952Jy sigma=0.000741 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.484 mas, bmaj=8.082 mas, bpa=-1.113 degrees ! Estimated noise=582.185 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310912 Jy ! Component: 100 - total flux cleaned = 0.000358047 Jy ! Component: 150 - total flux cleaned = 0.000386404 Jy ! Component: 200 - total flux cleaned = 0.000386053 Jy ! Total flux subtracted in 200 components = 0.000386053 Jy ! Clean residual min=-0.002195 max=0.002199 Jy/beam ! Clean residual mean=0.000036 rms=0.000544 Jy/beam ! Combined flux in latest and established models = 0.0495907 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0495907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086946Jy sigma=0.000741 ! Fit after self-cal, rms=0.086939Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.17343e-06 Jy ! Component: 100 - total flux cleaned = 1.7291e-05 Jy ! Component: 150 - total flux cleaned = 1.70159e-05 Jy ! Component: 200 - total flux cleaned = 1.73216e-05 Jy ! Total flux subtracted in 200 components = 1.73216e-05 Jy ! Clean residual min=-0.002186 max=0.002107 Jy/beam ! Clean residual mean=0.000038 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.049608 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.049608 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086935Jy sigma=0.000741 ! Fit after self-cal, rms=0.086928Jy sigma=0.000741 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086928Jy sigma=0.000741 ! Fit after self-cal, rms=0.086982Jy sigma=0.000741 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.477 mas, bmaj=8.056 mas, bpa=-1.13 degrees ! Estimated noise=582.238 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000222657 Jy ! Component: 100 - total flux cleaned = 0.000260217 Jy ! Component: 150 - total flux cleaned = 0.000271897 Jy ! Component: 200 - total flux cleaned = 0.000271948 Jy ! Total flux subtracted in 200 components = 0.000271948 Jy ! Clean residual min=-0.002189 max=0.002203 Jy/beam ! Clean residual mean=0.000036 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 0.04988 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 24 components and 0.04988 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086979Jy sigma=0.000741 ! Fit after self-cal, rms=0.086984Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.28679e-05 Jy ! Component: 100 - total flux cleaned = -6.27854e-05 Jy ! Component: 150 - total flux cleaned = -6.25213e-05 Jy ! Component: 200 - total flux cleaned = -6.28972e-05 Jy ! Total flux subtracted in 200 components = -6.28972e-05 Jy ! Clean residual min=-0.002132 max=0.002170 Jy/beam ! Clean residual mean=0.000037 rms=0.000551 Jy/beam ! Combined flux in latest and established models = 0.0498171 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 26 components and 0.0498171 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086982Jy sigma=0.000741 ! Fit after self-cal, rms=0.086981Jy sigma=0.000741 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.086981Jy sigma=0.000741 ! Fit after self-cal, rms=0.087065Jy sigma=0.000741 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.647 mas, bmaj=17.72 mas, bpa=0.9663 degrees ! Estimated noise=714.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000569147 Jy ! Component: 100 - total flux cleaned = 0.000623765 Jy ! Component: 150 - total flux cleaned = 0.000658418 Jy ! Component: 200 - total flux cleaned = 0.000679223 Jy ! Total flux subtracted in 200 components = 0.000679223 Jy ! Clean residual min=-0.002121 max=0.002419 Jy/beam ! Clean residual mean=0.000067 rms=0.000776 Jy/beam ! Combined flux in latest and established models = 0.0504963 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 31 components and 0.0504963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087067Jy sigma=0.000741 ! Fit after self-cal, rms=0.087076Jy sigma=0.000741 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.07776e-05 Jy ! Component: 100 - total flux cleaned = 4.16204e-05 Jy ! Component: 150 - total flux cleaned = 5.9946e-05 Jy ! Component: 200 - total flux cleaned = 6.86101e-05 Jy ! Total flux subtracted in 200 components = 6.86101e-05 Jy ! Clean residual min=-0.002131 max=0.002410 Jy/beam ! Clean residual mean=0.000067 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.0505649 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 32 components and 0.0505649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087079Jy sigma=0.000741 ! Fit after self-cal, rms=0.087082Jy sigma=0.000741 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.04 mas, bpa=-1.088 degrees ! Estimated noise=582.407 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 8.04 at -1.088 degrees (North through East) ! Clean map min=-0.0021397 max=0.048412 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.774 mas, bmaj=6.586 mas, bpa=-2.859 degrees ! Estimated noise=990.105 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0372954 Jy ! Component: 100 - total flux cleaned = 0.0455883 Jy ! Component: 150 - total flux cleaned = 0.0479716 Jy ! Component: 200 - total flux cleaned = 0.0484428 Jy ! Total flux subtracted in 200 components = 0.0484428 Jy ! Clean residual min=-0.003615 max=0.003632 Jy/beam ! Clean residual mean=0.000022 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.0484428 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0484428 Jy ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.04 mas, bpa=-1.088 degrees ! Estimated noise=582.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00166947 Jy ! Component: 100 - total flux cleaned = 0.00194707 Jy ! Component: 150 - total flux cleaned = 0.00192633 Jy ! Component: 200 - total flux cleaned = 0.00190776 Jy ! Total flux subtracted in 200 components = 0.00190776 Jy ! Clean residual min=-0.002095 max=0.002237 Jy/beam ! Clean residual mean=0.000037 rms=0.000558 Jy/beam ! Combined flux in latest and established models = 0.0503506 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 34 components and 0.0503506 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.647 mas, bmaj=17.72 mas, bpa=0.9663 degrees ! Estimated noise=714.318 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324416 Jy ! Component: 100 - total flux cleaned = 0.000369849 Jy ! Component: 150 - total flux cleaned = 0.000383221 Jy ! Component: 200 - total flux cleaned = 0.000383153 Jy ! Total flux subtracted in 200 components = 0.000383153 Jy ! Clean residual min=-0.002143 max=0.002440 Jy/beam ! Clean residual mean=0.000069 rms=0.000790 Jy/beam ! Combined flux in latest and established models = 0.0507337 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.16817e-05 Jy ! Component: 100 - total flux cleaned = 1.21229e-05 Jy ! Component: 150 - total flux cleaned = 1.22962e-05 Jy ! Component: 200 - total flux cleaned = 1.27606e-05 Jy ! Total flux subtracted in 200 components = 1.27606e-05 Jy ! Clean residual min=-0.002143 max=0.002426 Jy/beam ! Clean residual mean=0.000069 rms=0.000788 Jy/beam ! Combined flux in latest and established models = 0.0507465 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 43 components and 0.0507465 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.471 mas, bmaj=8.04 mas, bpa=-1.088 degrees ! Estimated noise=582.407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000179707 Jy ! Component: 100 - total flux cleaned = -0.000159861 Jy ! Component: 150 - total flux cleaned = -0.000215158 Jy ! Component: 200 - total flux cleaned = -0.000240896 Jy ! Total flux subtracted in 200 components = -0.000240896 Jy ! Clean residual min=-0.002121 max=0.002212 Jy/beam ! Clean residual mean=0.000037 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 0.0505056 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.0505056 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087084Jy sigma=0.000741 ! Fit after self-cal, rms=0.087085Jy sigma=0.000741 wmodel J0305-2421_S_2014_05_31_pus_map.mod ! Writing 51 model components to file: J0305-2421_S_2014_05_31_pus_map.mod wobs J0305-2421_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0305-2421_S_2014_05_31_pus_uvs.fits wwins J0305-2421_S_2014_05_31_pus_map.win ! wwins: Wrote 1 windows to J0305-2421_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000314498 Jy ! Component: 100 - total flux cleaned = 0.00027602 Jy ! Component: 150 - total flux cleaned = 0.000444436 Jy ! Component: 200 - total flux cleaned = 0.000411414 Jy ! Component: 250 - total flux cleaned = 0.000441329 Jy ! Component: 300 - total flux cleaned = 0.000351183 Jy ! Component: 350 - total flux cleaned = 0.000351458 Jy ! Component: 400 - total flux cleaned = 0.0001814 Jy ! Component: 450 - total flux cleaned = 0.000181555 Jy ! Component: 500 - total flux cleaned = 0.000127171 Jy ! Component: 550 - total flux cleaned = -3.5197e-06 Jy ! Component: 600 - total flux cleaned = -0.000106104 Jy ! Component: 650 - total flux cleaned = -0.000206466 Jy ! Component: 700 - total flux cleaned = -0.000328852 Jy ! Component: 750 - total flux cleaned = -0.000519796 Jy ! Component: 800 - total flux cleaned = -0.000635843 Jy ! Component: 850 - total flux cleaned = -0.000749726 Jy ! Component: 900 - total flux cleaned = -0.000749275 Jy ! Component: 950 - total flux cleaned = -0.000837813 Jy ! Component: 1000 - total flux cleaned = -0.000859506 Jy ! Component: 1050 - total flux cleaned = -0.000986904 Jy ! Component: 1100 - total flux cleaned = -0.000944917 Jy ! Component: 1150 - total flux cleaned = -0.000965952 Jy ! Component: 1200 - total flux cleaned = -0.00100651 Jy ! Component: 1250 - total flux cleaned = -0.0010464 Jy ! Component: 1300 - total flux cleaned = -0.00108602 Jy ! Component: 1350 - total flux cleaned = -0.00118254 Jy ! Component: 1400 - total flux cleaned = -0.0011632 Jy ! Component: 1450 - total flux cleaned = -0.001163 Jy ! Component: 1500 - total flux cleaned = -0.00119981 Jy ! Component: 1550 - total flux cleaned = -0.00125389 Jy ! Component: 1600 - total flux cleaned = -0.00121805 Jy ! Component: 1650 - total flux cleaned = -0.00120032 Jy ! Component: 1700 - total flux cleaned = -0.00128769 Jy ! Component: 1750 - total flux cleaned = -0.00125341 Jy ! Component: 1800 - total flux cleaned = -0.00135506 Jy ! Component: 1850 - total flux cleaned = -0.00135447 Jy ! Component: 1900 - total flux cleaned = -0.00135451 Jy ! Component: 1950 - total flux cleaned = -0.00143597 Jy ! Component: 2000 - total flux cleaned = -0.00141932 Jy ! Component: 2050 - total flux cleaned = -0.00143516 Jy ! Component: 2100 - total flux cleaned = -0.0014349 Jy ! Component: 2150 - total flux cleaned = -0.00143496 Jy ! Component: 2200 - total flux cleaned = -0.0014197 Jy ! Component: 2250 - total flux cleaned = -0.00140479 Jy ! Component: 2300 - total flux cleaned = -0.00143492 Jy ! Component: 2350 - total flux cleaned = -0.00149446 Jy ! Component: 2400 - total flux cleaned = -0.0015387 Jy ! Component: 2450 - total flux cleaned = -0.00156784 Jy ! Component: 2500 - total flux cleaned = -0.00162547 Jy ! Component: 2550 - total flux cleaned = -0.00165378 Jy ! Component: 2600 - total flux cleaned = -0.00165381 Jy ! Component: 2650 - total flux cleaned = -0.00166785 Jy ! Component: 2700 - total flux cleaned = -0.00169558 Jy ! Component: 2750 - total flux cleaned = -0.00170948 Jy ! Component: 2800 - total flux cleaned = -0.00175018 Jy ! Component: 2850 - total flux cleaned = -0.00175025 Jy ! Component: 2900 - total flux cleaned = -0.00176368 Jy ! Component: 2950 - total flux cleaned = -0.00175057 Jy ! Component: 3000 - total flux cleaned = -0.00175041 Jy ! Component: 3050 - total flux cleaned = -0.0017633 Jy ! Component: 3100 - total flux cleaned = -0.00175044 Jy ! Component: 3150 - total flux cleaned = -0.00172515 Jy ! Component: 3200 - total flux cleaned = -0.00173787 Jy ! Component: 3250 - total flux cleaned = -0.00175037 Jy ! Component: 3300 - total flux cleaned = -0.00176289 Jy ! Component: 3350 - total flux cleaned = -0.00177494 Jy ! Component: 3400 - total flux cleaned = -0.00173843 Jy ! Component: 3450 - total flux cleaned = -0.00184724 Jy ! Component: 3500 - total flux cleaned = -0.00182316 Jy ! Component: 3550 - total flux cleaned = -0.00185865 Jy ! Component: 3600 - total flux cleaned = -0.00184694 Jy ! Component: 3650 - total flux cleaned = -0.00184704 Jy ! Component: 3700 - total flux cleaned = -0.00196357 Jy ! Component: 3750 - total flux cleaned = -0.00192899 Jy ! Component: 3800 - total flux cleaned = -0.00196348 Jy ! Component: 3850 - total flux cleaned = -0.00200921 Jy ! Component: 3900 - total flux cleaned = -0.00206558 Jy ! Component: 3950 - total flux cleaned = -0.00209911 Jy ! Component: 4000 - total flux cleaned = -0.00207679 Jy ! Component: 4050 - total flux cleaned = -0.00210982 Jy ! Total flux subtracted in 4096 components = -0.00208778 Jy ! Clean residual min=-0.000686 max=0.000772 Jy/beam ! Clean residual mean=0.000008 rms=0.000208 Jy/beam ! Combined flux in latest and established models = 0.0484178 Jy keep ! Adding 314 model components to the UV plane model. ! The established model now contains 365 components and 0.0484178 Jy ![Exited script file: muppet] wmap "J0305-2421_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 8.04 at -1.088 degrees (North through East) ! Clean map min=-0.0013836 max=0.047867 Jy/beam ! Writing clean map to FITS file: J0305-2421_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0478672 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207963 device "J0305-2421_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0305-2421_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.30338 1.30338 2.60675 5.2135 10.427 20.854 41.708 83.4161 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.047 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.471 x 8.04 at -1.088 degrees (North through East) ! Clean map min=-0.0013836 max=0.047867 Jy/beam quit ! Quitting program ! Log file J0305-2421_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:44:25 2016