! Started logfile: J0217-0121_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:42:26 2016 obs J0217-0121_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0217-0121_S_2014_05_31_pus_uva.fits ! AN table 1: 56 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.863889 visibilities/baseline/integration-bin. ! Found source: J0217-0121 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 8708 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0217-0121_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 45 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.927726Jy sigma=0.010194 ! Fit after self-cal, rms=0.916662Jy sigma=0.010082 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.177 mas, bmaj=7.03 mas, bpa=4.414 degrees ! Estimated noise=962.585 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0670223 Jy ! Component: 100 - total flux cleaned = 0.08167 Jy ! Total flux subtracted in 100 components = 0.08167 Jy ! Clean residual min=-0.003039 max=0.004109 Jy/beam ! Clean residual mean=0.000006 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 0.08167 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.08167 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075656Jy sigma=0.000778 ! Fit after self-cal, rms=0.075645Jy sigma=0.000778 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.84 mas, bmaj=8.165 mas, bpa=3.211 degrees ! Estimated noise=700.365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00332216 Jy ! Component: 100 - total flux cleaned = 0.00447886 Jy ! Component: 150 - total flux cleaned = 0.00499486 Jy ! Component: 200 - total flux cleaned = 0.00512919 Jy ! Total flux subtracted in 200 components = 0.00512919 Jy ! Clean residual min=-0.002270 max=0.002452 Jy/beam ! Clean residual mean=0.000002 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 0.0867992 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 26 components and 0.0867992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.075477Jy sigma=0.000777 ! Fit after self-cal, rms=0.075480Jy sigma=0.000777 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.85 HN 0.97 KP 1.03 ! LA 1.17 MK 1.00 NL 0.93 OV 0.99 ! PT 1.04 SC 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.98 HN 1.00 KP 1.02 ! LA 1.10 MK 0.98 NL 1.07 OV 0.97 ! PT 1.01 SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.18 HN 1.06 KP 0.92 ! LA 0.90 MK 0.99 NL 1.00 OV 0.93 ! PT 0.97 SC 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.11 FD 0.95 HN 0.99 KP 0.90 ! LA 0.87 MK 1.05 NL 1.11 OV 0.98 ! PT 1.02 SC 0.97 ! ! ! Fit before self-cal, rms=0.075480Jy sigma=0.000777 ! Fit after self-cal, rms=0.073790Jy sigma=0.000772 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.832 mas, bmaj=8.181 mas, bpa=3.422 degrees ! Estimated noise=698.407 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.4242e-05 Jy ! Component: 100 - total flux cleaned = 9.988e-05 Jy ! Component: 150 - total flux cleaned = 8.65381e-05 Jy ! Component: 200 - total flux cleaned = 8.67501e-05 Jy ! Total flux subtracted in 200 components = 8.67501e-05 Jy ! Clean residual min=-0.001829 max=0.002034 Jy/beam ! Clean residual mean=0.000001 rms=0.000509 Jy/beam ! Combined flux in latest and established models = 0.086886 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 30 components and 0.086886 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073783Jy sigma=0.000772 ! Fit after self-cal, rms=0.073789Jy sigma=0.000771 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073789Jy sigma=0.000771 ! Fit after self-cal, rms=0.074004Jy sigma=0.000770 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.826 mas, bmaj=8.177 mas, bpa=3.333 degrees ! Estimated noise=698.41 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.68121e-05 Jy ! Component: 100 - total flux cleaned = 3.78017e-05 Jy ! Component: 150 - total flux cleaned = 6.36968e-05 Jy ! Component: 200 - total flux cleaned = 7.80023e-05 Jy ! Total flux subtracted in 200 components = 7.80023e-05 Jy ! Clean residual min=-0.001964 max=0.001964 Jy/beam ! Clean residual mean=0.000004 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.086964 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 33 components and 0.086964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074001Jy sigma=0.000770 ! Fit after self-cal, rms=0.074013Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.62153e-05 Jy ! Component: 100 - total flux cleaned = 1.15625e-05 Jy ! Component: 150 - total flux cleaned = 1.7703e-05 Jy ! Component: 200 - total flux cleaned = 2.34785e-05 Jy ! Total flux subtracted in 200 components = 2.34785e-05 Jy ! Clean residual min=-0.001945 max=0.001960 Jy/beam ! Clean residual mean=0.000003 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0869874 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 36 components and 0.0869874 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074012Jy sigma=0.000770 ! Fit after self-cal, rms=0.074012Jy sigma=0.000770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074012Jy sigma=0.000770 ! Fit after self-cal, rms=0.074057Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=8.174 mas, bpa=3.284 degrees ! Estimated noise=698.637 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.63302e-05 Jy ! Component: 100 - total flux cleaned = 0.000105815 Jy ! Component: 150 - total flux cleaned = 0.000129015 Jy ! Component: 200 - total flux cleaned = 0.000139583 Jy ! Total flux subtracted in 200 components = 0.000139583 Jy ! Clean residual min=-0.001952 max=0.001963 Jy/beam ! Clean residual mean=0.000003 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.087127 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 38 components and 0.087127 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074055Jy sigma=0.000770 ! Fit after self-cal, rms=0.074056Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.50962e-07 Jy ! Component: 100 - total flux cleaned = 1.03762e-05 Jy ! Component: 150 - total flux cleaned = 2.03759e-05 Jy ! Component: 200 - total flux cleaned = 2.4844e-05 Jy ! Total flux subtracted in 200 components = 2.4844e-05 Jy ! Clean residual min=-0.001950 max=0.001965 Jy/beam ! Clean residual mean=0.000003 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.0871519 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.0871519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074056Jy sigma=0.000770 ! Fit after self-cal, rms=0.074056Jy sigma=0.000770 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074056Jy sigma=0.000770 ! Fit after self-cal, rms=0.074075Jy sigma=0.000770 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=12.46 mas, bpa=-0.9901 degrees ! Estimated noise=821.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00044534 Jy ! Component: 100 - total flux cleaned = 0.000525446 Jy ! Component: 150 - total flux cleaned = 0.00055111 Jy ! Component: 200 - total flux cleaned = 0.0005746 Jy ! Total flux subtracted in 200 components = 0.0005746 Jy ! Clean residual min=-0.002239 max=0.002313 Jy/beam ! Clean residual mean=0.000005 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.0877265 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 49 components and 0.0877265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074075Jy sigma=0.000770 ! Fit after self-cal, rms=0.074076Jy sigma=0.000770 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.51464e-05 Jy ! Component: 100 - total flux cleaned = 6.57442e-05 Jy ! Component: 150 - total flux cleaned = 7.63542e-05 Jy ! Component: 200 - total flux cleaned = 8.15273e-05 Jy ! Total flux subtracted in 200 components = 8.15273e-05 Jy ! Clean residual min=-0.002236 max=0.002308 Jy/beam ! Clean residual mean=0.000005 rms=0.000564 Jy/beam ! Combined flux in latest and established models = 0.087808 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 55 components and 0.087808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074076Jy sigma=0.000770 ! Fit after self-cal, rms=0.074076Jy sigma=0.000770 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=8.171 mas, bpa=3.253 degrees ! Estimated noise=698.886 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 8.171 at 3.253 degrees (North through East) ! Clean map min=-0.0019008 max=0.085038 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.153 mas, bmaj=7.03 mas, bpa=4.496 degrees ! Estimated noise=958.378 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0666952 Jy ! Component: 100 - total flux cleaned = 0.0813494 Jy ! Component: 150 - total flux cleaned = 0.0845115 Jy ! Component: 200 - total flux cleaned = 0.0850233 Jy ! Total flux subtracted in 200 components = 0.0850233 Jy ! Clean residual min=-0.002716 max=0.002687 Jy/beam ! Clean residual mean=-0.000000 rms=0.000638 Jy/beam ! Combined flux in latest and established models = 0.0850233 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0850233 Jy ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=8.171 mas, bpa=3.253 degrees ! Estimated noise=698.886 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (30.5, -35). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000988421 Jy ! Component: 100 - total flux cleaned = 0.00160432 Jy ! Component: 150 - total flux cleaned = 0.00207981 Jy ! Component: 200 - total flux cleaned = 0.00232862 Jy ! Total flux subtracted in 200 components = 0.00232862 Jy ! Clean residual min=-0.002100 max=0.001844 Jy/beam ! Clean residual mean=0.000004 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.0873519 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 0.0873519 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.711 mas, bmaj=12.46 mas, bpa=-0.9901 degrees ! Estimated noise=821.468 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107452 Jy ! Component: 100 - total flux cleaned = 0.00113148 Jy ! Component: 150 - total flux cleaned = 0.00110924 Jy ! Component: 200 - total flux cleaned = 0.0010903 Jy ! Total flux subtracted in 200 components = 0.0010903 Jy ! Clean residual min=-0.002341 max=0.002251 Jy/beam ! Clean residual mean=0.000006 rms=0.000540 Jy/beam ! Combined flux in latest and established models = 0.0884422 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.79905e-05 Jy ! Component: 100 - total flux cleaned = -4.79343e-05 Jy ! Component: 150 - total flux cleaned = -4.81295e-05 Jy ! Component: 200 - total flux cleaned = -6.00657e-05 Jy ! Total flux subtracted in 200 components = -6.00657e-05 Jy ! Clean residual min=-0.002302 max=0.002251 Jy/beam ! Clean residual mean=0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0883821 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 69 components and 0.0883821 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.821 mas, bmaj=8.171 mas, bpa=3.253 degrees ! Estimated noise=698.886 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134596 Jy ! Component: 100 - total flux cleaned = -0.000182768 Jy ! Component: 150 - total flux cleaned = -0.000162343 Jy ! Component: 200 - total flux cleaned = -0.000126237 Jy ! Total flux subtracted in 200 components = -0.000126237 Jy ! Clean residual min=-0.001937 max=0.001922 Jy/beam ! Clean residual mean=0.000004 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0882559 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 89 components and 0.0882559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074009Jy sigma=0.000770 ! Fit after self-cal, rms=0.073994Jy sigma=0.000770 wmodel J0217-0121_S_2014_05_31_pus_map.mod ! Writing 89 model components to file: J0217-0121_S_2014_05_31_pus_map.mod wobs J0217-0121_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0217-0121_S_2014_05_31_pus_uvs.fits wwins J0217-0121_S_2014_05_31_pus_map.win ! wwins: Wrote 2 windows to J0217-0121_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 6.38557e-05 Jy ! Component: 100 - total flux cleaned = 0.000250183 Jy ! Component: 150 - total flux cleaned = 0.000485285 Jy ! Component: 200 - total flux cleaned = 0.000682833 Jy ! Component: 250 - total flux cleaned = 0.000901085 Jy ! Component: 300 - total flux cleaned = 0.00108583 Jy ! Component: 350 - total flux cleaned = 0.00121349 Jy ! Component: 400 - total flux cleaned = 0.00128812 Jy ! Component: 450 - total flux cleaned = 0.00143389 Jy ! Component: 500 - total flux cleaned = 0.00157577 Jy ! Component: 550 - total flux cleaned = 0.00164557 Jy ! Component: 600 - total flux cleaned = 0.00180529 Jy ! Component: 650 - total flux cleaned = 0.00189486 Jy ! Component: 700 - total flux cleaned = 0.00207077 Jy ! Component: 750 - total flux cleaned = 0.00222188 Jy ! Component: 800 - total flux cleaned = 0.00234968 Jy ! Component: 850 - total flux cleaned = 0.00247517 Jy ! Component: 900 - total flux cleaned = 0.00263979 Jy ! Component: 950 - total flux cleaned = 0.00278147 Jy ! Component: 1000 - total flux cleaned = 0.00290136 Jy ! Component: 1050 - total flux cleaned = 0.00301947 Jy ! Component: 1100 - total flux cleaned = 0.00311657 Jy ! Component: 1150 - total flux cleaned = 0.0032507 Jy ! Component: 1200 - total flux cleaned = 0.00336404 Jy ! Component: 1250 - total flux cleaned = 0.00345688 Jy ! Component: 1300 - total flux cleaned = 0.00358521 Jy ! Component: 1350 - total flux cleaned = 0.00362124 Jy ! Component: 1400 - total flux cleaned = 0.00374649 Jy ! Component: 1450 - total flux cleaned = 0.00379928 Jy ! Component: 1500 - total flux cleaned = 0.00383424 Jy ! Component: 1550 - total flux cleaned = 0.00392038 Jy ! Component: 1600 - total flux cleaned = 0.00397144 Jy ! Component: 1650 - total flux cleaned = 0.00412305 Jy ! Component: 1700 - total flux cleaned = 0.00420599 Jy ! Component: 1750 - total flux cleaned = 0.0043373 Jy ! Component: 1800 - total flux cleaned = 0.00443461 Jy ! Component: 1850 - total flux cleaned = 0.00448256 Jy ! Component: 1900 - total flux cleaned = 0.00464144 Jy ! Component: 1950 - total flux cleaned = 0.00468856 Jy ! Component: 2000 - total flux cleaned = 0.00478195 Jy ! Component: 2050 - total flux cleaned = 0.0048435 Jy ! Component: 2100 - total flux cleaned = 0.00496527 Jy ! Component: 2150 - total flux cleaned = 0.00508617 Jy ! Component: 2200 - total flux cleaned = 0.00522061 Jy ! Component: 2250 - total flux cleaned = 0.00532414 Jy ! Component: 2300 - total flux cleaned = 0.00545618 Jy ! Component: 2350 - total flux cleaned = 0.00558683 Jy ! Component: 2400 - total flux cleaned = 0.0057307 Jy ! Component: 2450 - total flux cleaned = 0.00583036 Jy ! Component: 2500 - total flux cleaned = 0.00592929 Jy ! Component: 2550 - total flux cleaned = 0.00605509 Jy ! Component: 2600 - total flux cleaned = 0.00615221 Jy ! Component: 2650 - total flux cleaned = 0.00626214 Jy ! Component: 2700 - total flux cleaned = 0.00637127 Jy ! Component: 2750 - total flux cleaned = 0.00650637 Jy ! Component: 2800 - total flux cleaned = 0.00653301 Jy ! Component: 2850 - total flux cleaned = 0.00662612 Jy ! Component: 2900 - total flux cleaned = 0.00671854 Jy ! Component: 2950 - total flux cleaned = 0.00683624 Jy ! Component: 3000 - total flux cleaned = 0.006953 Jy ! Component: 3050 - total flux cleaned = 0.00700445 Jy ! Component: 3100 - total flux cleaned = 0.00708112 Jy ! Component: 3150 - total flux cleaned = 0.0071696 Jy ! Component: 3200 - total flux cleaned = 0.00729505 Jy ! Component: 3250 - total flux cleaned = 0.00738205 Jy ! Component: 3300 - total flux cleaned = 0.0074317 Jy ! Component: 3350 - total flux cleaned = 0.00751757 Jy ! Component: 3400 - total flux cleaned = 0.00765137 Jy ! Component: 3450 - total flux cleaned = 0.00762716 Jy ! Component: 3500 - total flux cleaned = 0.00766324 Jy ! Component: 3550 - total flux cleaned = 0.00773461 Jy ! Component: 3600 - total flux cleaned = 0.00778199 Jy ! Component: 3650 - total flux cleaned = 0.00778211 Jy ! Component: 3700 - total flux cleaned = 0.00786378 Jy ! Component: 3750 - total flux cleaned = 0.00789863 Jy ! Component: 3800 - total flux cleaned = 0.00797933 Jy ! Component: 3850 - total flux cleaned = 0.00796783 Jy ! Component: 3900 - total flux cleaned = 0.00802489 Jy ! Component: 3950 - total flux cleaned = 0.00804747 Jy ! Component: 4000 - total flux cleaned = 0.00812583 Jy ! Component: 4050 - total flux cleaned = 0.00818142 Jy ! Total flux subtracted in 4096 components = 0.0081481 Jy ! Clean residual min=-0.000780 max=0.000663 Jy/beam ! Clean residual mean=0.000000 rms=0.000212 Jy/beam ! Combined flux in latest and established models = 0.096404 Jy keep ! Adding 294 model components to the UV plane model. ! The established model now contains 383 components and 0.096404 Jy ![Exited script file: muppet] wmap "J0217-0121_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 8.171 at 3.253 degrees (North through East) ! Clean map min=-0.0020946 max=0.085082 Jy/beam ! Writing clean map to FITS file: J0217-0121_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0850816 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000210345 device "J0217-0121_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0217-0121_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.741682 0.741682 1.48336 2.96673 5.93345 11.8669 23.7338 47.4676 94.9353 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.085 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.821 x 8.171 at 3.253 degrees (North through East) ! Clean map min=-0.0020946 max=0.085082 Jy/beam quit ! Quitting program ! Log file J0217-0121_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:42:31 2016