! Started logfile: J0006+1235_S_2014_05_31_pus_uvs.log on Mon Nov 28 14:39:27 2016 obs J0006+1235_S_2014_05_31_pus_uva.fits ! Reading UV FITS file: J0006+1235_S_2014_05_31_pus_uva.fits ! AN table 1: 111 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.89049 visibilities/baseline/integration-bin. ! Found source: J0006+1235 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23588e+09 3.2e+07 1 3.2e+07 ! 02 2 2.26788e+09 3.2e+07 1 3.2e+07 ! 03 3 2.29988e+09 3.2e+07 1 3.2e+07 ! 04 4 2.36388e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 336 lines of history. ! ! Reading 17792 visibilities. select I ! Polarization I is unavailable. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@muppet J0006+1235_S_2014_05_31_pus] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 62 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=0.887564Jy sigma=0.010644 ! Fit after self-cal, rms=0.863659Jy sigma=0.010388 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.789 mas, bmaj=6.911 mas, bpa=-3.844 degrees ! Estimated noise=625.661 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.104368 Jy ! Component: 100 - total flux cleaned = 0.128469 Jy ! Total flux subtracted in 100 components = 0.128469 Jy ! Clean residual min=-0.005195 max=0.016694 Jy/beam ! Clean residual mean=0.000004 rms=0.001659 Jy/beam ! Combined flux in latest and established models = 0.128469 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.128469 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078266Jy sigma=0.000884 ! Fit after self-cal, rms=0.078248Jy sigma=0.000884 ! Inverting map ! Added new window around map position (5.5, 2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0154556 Jy ! Component: 100 - total flux cleaned = 0.0246295 Jy ! Total flux subtracted in 100 components = 0.0246295 Jy ! Clean residual min=-0.004130 max=0.005139 Jy/beam ! Clean residual mean=0.000004 rms=0.001060 Jy/beam ! Combined flux in latest and established models = 0.153099 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 16 components and 0.153099 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074092Jy sigma=0.000831 ! Fit after self-cal, rms=0.073757Jy sigma=0.000827 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00728264 Jy ! Component: 100 - total flux cleaned = 0.011886 Jy ! Total flux subtracted in 100 components = 0.011886 Jy ! Clean residual min=-0.003146 max=0.003444 Jy/beam ! Clean residual mean=0.000004 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.164985 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 25 components and 0.164985 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072703Jy sigma=0.000815 ! Fit after self-cal, rms=0.072638Jy sigma=0.000814 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.322 mas, bmaj=7.904 mas, bpa=-5.659 degrees ! Estimated noise=447.621 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00502172 Jy ! Component: 100 - total flux cleaned = 0.00783754 Jy ! Component: 150 - total flux cleaned = 0.00950817 Jy ! Component: 200 - total flux cleaned = 0.0104728 Jy ! Total flux subtracted in 200 components = 0.0104728 Jy ! Clean residual min=-0.002940 max=0.003607 Jy/beam ! Clean residual mean=0.000004 rms=0.000835 Jy/beam ! Combined flux in latest and established models = 0.175457 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 51 components and 0.175457 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072230Jy sigma=0.000811 ! Fit after self-cal, rms=0.072195Jy sigma=0.000810 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.87 HN 1.01 KP 1.06 ! LA 1.22 MK 1.01 NL 0.97 OV 0.95 ! PT 1.03 SC 1.00 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 HN 1.05 KP 1.02 ! LA 1.14 MK 1.01 NL 1.06 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.13 HN 1.02 KP 0.90 ! LA 0.91 MK 1.02 NL 0.98 OV 0.92 ! PT 0.99 SC 1.01 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.08 FD 1.00 HN 0.99 KP 0.87 ! LA 0.87 MK 0.97 NL 1.05 OV 0.97 ! PT 1.01 SC 0.94 ! ! ! Fit before self-cal, rms=0.072195Jy sigma=0.000810 ! Fit after self-cal, rms=0.069489Jy sigma=0.000789 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=7.89 mas, bpa=-5.416 degrees ! Estimated noise=446.29 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (19, 7). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330124 Jy ! Component: 100 - total flux cleaned = 0.00511033 Jy ! Component: 150 - total flux cleaned = 0.00574457 Jy ! Component: 200 - total flux cleaned = 0.0061535 Jy ! Total flux subtracted in 200 components = 0.0061535 Jy ! Clean residual min=-0.001747 max=0.002459 Jy/beam ! Clean residual mean=0.000002 rms=0.000547 Jy/beam ! Combined flux in latest and established models = 0.181611 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 80 components and 0.181611 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069337Jy sigma=0.000787 ! Fit after self-cal, rms=0.069332Jy sigma=0.000787 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069332Jy sigma=0.000787 ! Fit after self-cal, rms=0.069432Jy sigma=0.000786 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.881 mas, bpa=-5.428 degrees ! Estimated noise=445.684 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000627956 Jy ! Component: 100 - total flux cleaned = 0.000693309 Jy ! Component: 150 - total flux cleaned = 0.000748832 Jy ! Component: 200 - total flux cleaned = 0.000799503 Jy ! Total flux subtracted in 200 components = 0.000799503 Jy ! Clean residual min=-0.001608 max=0.002078 Jy/beam ! Clean residual mean=0.000002 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 0.18241 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 100 components and 0.18241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069407Jy sigma=0.000785 ! Fit after self-cal, rms=0.069412Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000213776 Jy ! Component: 100 - total flux cleaned = 0.000279645 Jy ! Component: 150 - total flux cleaned = 0.000320092 Jy ! Component: 200 - total flux cleaned = 0.00035755 Jy ! Total flux subtracted in 200 components = 0.00035755 Jy ! Clean residual min=-0.001565 max=0.002061 Jy/beam ! Clean residual mean=0.000002 rms=0.000499 Jy/beam ! Combined flux in latest and established models = 0.182768 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 124 components and 0.182768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069400Jy sigma=0.000785 ! Fit after self-cal, rms=0.069399Jy sigma=0.000785 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069399Jy sigma=0.000785 ! Fit after self-cal, rms=0.069386Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.325 mas, bmaj=7.874 mas, bpa=-5.38 degrees ! Estimated noise=445.598 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000278608 Jy ! Component: 100 - total flux cleaned = 0.000356107 Jy ! Component: 150 - total flux cleaned = 0.000427411 Jy ! Component: 200 - total flux cleaned = 0.000427567 Jy ! Total flux subtracted in 200 components = 0.000427567 Jy ! Clean residual min=-0.001564 max=0.002041 Jy/beam ! Clean residual mean=0.000002 rms=0.000492 Jy/beam ! Combined flux in latest and established models = 0.183195 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 132 components and 0.183195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069376Jy sigma=0.000785 ! Fit after self-cal, rms=0.069376Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 9.3907e-05 Jy ! Component: 100 - total flux cleaned = 0.000125877 Jy ! Component: 150 - total flux cleaned = 0.000156113 Jy ! Component: 200 - total flux cleaned = 0.000156515 Jy ! Total flux subtracted in 200 components = 0.000156515 Jy ! Clean residual min=-0.001545 max=0.002051 Jy/beam ! Clean residual mean=0.000002 rms=0.000489 Jy/beam ! Combined flux in latest and established models = 0.183352 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 142 components and 0.183352 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069370Jy sigma=0.000785 ! Fit after self-cal, rms=0.069369Jy sigma=0.000785 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069369Jy sigma=0.000785 ! Fit after self-cal, rms=0.069372Jy sigma=0.000785 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.229 mas, bmaj=12 mas, bpa=-4.709 degrees ! Estimated noise=550.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000411788 Jy ! Component: 100 - total flux cleaned = 0.000561925 Jy ! Component: 150 - total flux cleaned = 0.000498576 Jy ! Component: 200 - total flux cleaned = 0.000456185 Jy ! Total flux subtracted in 200 components = 0.000456185 Jy ! Clean residual min=-0.002346 max=0.003549 Jy/beam ! Clean residual mean=0.000005 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.183808 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 152 components and 0.183808 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069371Jy sigma=0.000785 ! Fit after self-cal, rms=0.069370Jy sigma=0.000785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (43, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00317338 Jy ! Component: 100 - total flux cleaned = 0.00505723 Jy ! Component: 150 - total flux cleaned = 0.00611146 Jy ! Component: 200 - total flux cleaned = 0.00654833 Jy ! Total flux subtracted in 200 components = 0.00654833 Jy ! Clean residual min=-0.002111 max=0.003078 Jy/beam ! Clean residual mean=0.000005 rms=0.000659 Jy/beam ! Combined flux in latest and established models = 0.190356 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 210 components and 0.190356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069290Jy sigma=0.000784 ! Fit after self-cal, rms=0.069278Jy sigma=0.000784 ! Inverting map ! Added new window around map position (67, 21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00274974 Jy ! Component: 100 - total flux cleaned = 0.00427017 Jy ! Component: 150 - total flux cleaned = 0.00516414 Jy ! Component: 200 - total flux cleaned = 0.00579267 Jy ! Total flux subtracted in 200 components = 0.00579267 Jy ! Clean residual min=-0.001792 max=0.001745 Jy/beam ! Clean residual mean=0.000003 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 0.196149 Jy ! Performing phase self-cal ! Adding 88 model components to the UV plane model. ! The established model now contains 293 components and 0.196149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069208Jy sigma=0.000783 ! Fit after self-cal, rms=0.069204Jy sigma=0.000783 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=7.868 mas, bpa=-5.344 degrees ! Estimated noise=445.665 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 7.868 at -5.344 degrees (North through East) ! Clean map min=-0.001349 max=0.13495 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.791 mas, bmaj=6.877 mas, bpa=-3.483 degrees ! Estimated noise=619.494 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.102968 Jy ! Component: 100 - total flux cleaned = 0.129908 Jy ! Component: 150 - total flux cleaned = 0.145128 Jy ! Component: 200 - total flux cleaned = 0.15477 Jy ! Total flux subtracted in 200 components = 0.15477 Jy ! Clean residual min=-0.002977 max=0.005168 Jy/beam ! Clean residual mean=-0.000001 rms=0.000828 Jy/beam ! Combined flux in latest and established models = 0.15477 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 17 model components to the UV plane model. ! The established model now contains 17 components and 0.15477 Jy ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=7.868 mas, bpa=-5.344 degrees ! Estimated noise=445.665 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00919696 Jy ! Component: 100 - total flux cleaned = 0.0144986 Jy ! Component: 150 - total flux cleaned = 0.0182407 Jy ! Component: 200 - total flux cleaned = 0.021252 Jy ! Total flux subtracted in 200 components = 0.021252 Jy ! Clean residual min=-0.002160 max=0.002057 Jy/beam ! Clean residual mean=-0.000002 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.176022 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 63 components and 0.176022 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.229 mas, bmaj=12 mas, bpa=-4.709 degrees ! Estimated noise=550.133 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0043844 Jy ! Component: 100 - total flux cleaned = 0.00776643 Jy ! Component: 150 - total flux cleaned = 0.0105095 Jy ! Component: 200 - total flux cleaned = 0.0127761 Jy ! Total flux subtracted in 200 components = 0.0127761 Jy ! Clean residual min=-0.002432 max=0.001960 Jy/beam ! Clean residual mean=-0.000002 rms=0.000641 Jy/beam ! Combined flux in latest and established models = 0.188798 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189538 Jy ! Component: 100 - total flux cleaned = 0.00337344 Jy ! Component: 150 - total flux cleaned = 0.00443809 Jy ! Component: 200 - total flux cleaned = 0.00544261 Jy ! Total flux subtracted in 200 components = 0.00544261 Jy ! Clean residual min=-0.001932 max=0.001776 Jy/beam ! Clean residual mean=-0.000000 rms=0.000517 Jy/beam ! Combined flux in latest and established models = 0.194241 Jy ! Adding 176 model components to the UV plane model. ! The established model now contains 229 components and 0.194241 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.324 mas, bmaj=7.868 mas, bpa=-5.344 degrees ! Estimated noise=445.665 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000491916 Jy ! Component: 100 - total flux cleaned = 0.00102555 Jy ! Component: 150 - total flux cleaned = 0.00132658 Jy ! Component: 200 - total flux cleaned = 0.00164358 Jy ! Total flux subtracted in 200 components = 0.00164358 Jy ! Clean residual min=-0.001401 max=0.001453 Jy/beam ! Clean residual mean=0.000000 rms=0.000343 Jy/beam ! Combined flux in latest and established models = 0.195884 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 261 components and 0.195884 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069206Jy sigma=0.000783 ! Fit after self-cal, rms=0.069203Jy sigma=0.000783 wmodel J0006+1235_S_2014_05_31_pus_map.mod ! Writing 261 model components to file: J0006+1235_S_2014_05_31_pus_map.mod wobs J0006+1235_S_2014_05_31_pus_uvs.fits ! Writing UV FITS file: J0006+1235_S_2014_05_31_pus_uvs.fits wwins J0006+1235_S_2014_05_31_pus_map.win ! wwins: Wrote 5 windows to J0006+1235_S_2014_05_31_pus_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.24907e-06 Jy ! Component: 100 - total flux cleaned = -4.35653e-05 Jy ! Component: 150 - total flux cleaned = -0.000108997 Jy ! Component: 200 - total flux cleaned = -0.000108512 Jy ! Component: 250 - total flux cleaned = -0.00021055 Jy ! Component: 300 - total flux cleaned = -0.000249627 Jy ! Component: 350 - total flux cleaned = -0.00032513 Jy ! Component: 400 - total flux cleaned = -0.000362088 Jy ! Component: 450 - total flux cleaned = -0.000398419 Jy ! Component: 500 - total flux cleaned = -0.000399031 Jy ! Component: 550 - total flux cleaned = -0.000519579 Jy ! Component: 600 - total flux cleaned = -0.000603323 Jy ! Component: 650 - total flux cleaned = -0.000636363 Jy ! Component: 700 - total flux cleaned = -0.00073309 Jy ! Component: 750 - total flux cleaned = -0.000733184 Jy ! Component: 800 - total flux cleaned = -0.000810801 Jy ! Component: 850 - total flux cleaned = -0.000810926 Jy ! Component: 900 - total flux cleaned = -0.000900725 Jy ! Component: 950 - total flux cleaned = -0.000930098 Jy ! Component: 1000 - total flux cleaned = -0.000973805 Jy ! Component: 1050 - total flux cleaned = -0.00100224 Jy ! Component: 1100 - total flux cleaned = -0.00101617 Jy ! Component: 1150 - total flux cleaned = -0.00101598 Jy ! Component: 1200 - total flux cleaned = -0.00105698 Jy ! Component: 1250 - total flux cleaned = -0.0010434 Jy ! Component: 1300 - total flux cleaned = -0.00105675 Jy ! Component: 1350 - total flux cleaned = -0.00109617 Jy ! Component: 1400 - total flux cleaned = -0.00112223 Jy ! Component: 1450 - total flux cleaned = -0.00110933 Jy ! Component: 1500 - total flux cleaned = -0.00116001 Jy ! Component: 1550 - total flux cleaned = -0.00119759 Jy ! Component: 1600 - total flux cleaned = -0.00114804 Jy ! Component: 1650 - total flux cleaned = -0.00120944 Jy ! Component: 1700 - total flux cleaned = -0.00122161 Jy ! Component: 1750 - total flux cleaned = -0.00124546 Jy ! Component: 1800 - total flux cleaned = -0.00122173 Jy ! Component: 1850 - total flux cleaned = -0.00129181 Jy ! Component: 1900 - total flux cleaned = -0.00123375 Jy ! Component: 1950 - total flux cleaned = -0.0012568 Jy ! Component: 2000 - total flux cleaned = -0.00125687 Jy ! Component: 2050 - total flux cleaned = -0.00129034 Jy ! Component: 2100 - total flux cleaned = -0.00129018 Jy ! Component: 2150 - total flux cleaned = -0.00126825 Jy ! Component: 2200 - total flux cleaned = -0.00132268 Jy ! Component: 2250 - total flux cleaned = -0.00130101 Jy ! Component: 2300 - total flux cleaned = -0.00130117 Jy ! Component: 2350 - total flux cleaned = -0.00134357 Jy ! Component: 2400 - total flux cleaned = -0.00136447 Jy ! Component: 2450 - total flux cleaned = -0.00135395 Jy ! Component: 2500 - total flux cleaned = -0.0013335 Jy ! Component: 2550 - total flux cleaned = -0.00133356 Jy ! Component: 2600 - total flux cleaned = -0.00136383 Jy ! Component: 2650 - total flux cleaned = -0.00133402 Jy ! Component: 2700 - total flux cleaned = -0.00136379 Jy ! Component: 2750 - total flux cleaned = -0.00137353 Jy ! Component: 2800 - total flux cleaned = -0.00137358 Jy ! Component: 2850 - total flux cleaned = -0.00135422 Jy ! Component: 2900 - total flux cleaned = -0.00134458 Jy ! Component: 2950 - total flux cleaned = -0.00134467 Jy ! Component: 3000 - total flux cleaned = -0.00134466 Jy ! Component: 3050 - total flux cleaned = -0.00130725 Jy ! Component: 3100 - total flux cleaned = -0.00132597 Jy ! Component: 3150 - total flux cleaned = -0.00135364 Jy ! Component: 3200 - total flux cleaned = -0.00136278 Jy ! Component: 3250 - total flux cleaned = -0.00140812 Jy ! Component: 3300 - total flux cleaned = -0.00141705 Jy ! Component: 3350 - total flux cleaned = -0.00143494 Jy ! Component: 3400 - total flux cleaned = -0.00146172 Jy ! Component: 3450 - total flux cleaned = -0.00145293 Jy ! Component: 3500 - total flux cleaned = -0.0014793 Jy ! Component: 3550 - total flux cleaned = -0.00148812 Jy ! Component: 3600 - total flux cleaned = -0.00153143 Jy ! Component: 3650 - total flux cleaned = -0.00153141 Jy ! Component: 3700 - total flux cleaned = -0.00154844 Jy ! Component: 3750 - total flux cleaned = -0.00157375 Jy ! Component: 3800 - total flux cleaned = -0.00161579 Jy ! Component: 3850 - total flux cleaned = -0.00161578 Jy ! Component: 3900 - total flux cleaned = -0.0016739 Jy ! Component: 3950 - total flux cleaned = -0.00170697 Jy ! Component: 4000 - total flux cleaned = -0.00170686 Jy ! Component: 4050 - total flux cleaned = -0.00174762 Jy ! Total flux subtracted in 4096 components = -0.00177184 Jy ! Clean residual min=-0.000593 max=0.000533 Jy/beam ! Clean residual mean=-0.000001 rms=0.000153 Jy/beam ! Combined flux in latest and established models = 0.194113 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 550 components and 0.194113 Jy ![Exited script file: muppet] wmap "J0006+1235_S_2014_05_31_pus\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 7.868 at -5.344 degrees (North through East) ! Clean map min=-0.0009547 max=0.13474 Jy/beam ! Writing clean map to FITS file: J0006+1235_S_2014_05_31_pus_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.134735 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000151931 device "J0006+1235_S_2014_05_31_pus\_map.eps/VPS" ! Attempting to open device: 'J0006+1235_S_2014_05_31_pus_map.eps/VPS' loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.338288 0.338288 0.676576 1.35315 2.7063 5.41261 10.8252 21.6504 43.3009 86.6017 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.134 mapcolor none ! Mapplot colormap: none, contrast: 1 brightness: 0.5. mapplot cln ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.324 x 7.868 at -5.344 degrees (North through East) ! Clean map min=-0.0009547 max=0.13474 Jy/beam quit ! Quitting program ! Log file J0006+1235_S_2014_05_31_pus_uvs.log closed on Mon Nov 28 14:39:34 2016