! Started logfile: /scr/pima/bp192c4_uvs/J1439-3955_C_uvs.log on Mon May 30 11:18:02 2016
obs /scr/pima/bp192c4_uvs/J1439-3955_C_uva.fits
! Reading UV FITS file: /scr/pima/bp192c4_uvs/J1439-3955_C_uva.fits
! AN table 1: 94 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.71383 visibilities/baseline/integration-bin.
! Found source: J1439-3955
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    4.128e+09      3.2e+07          1      3.2e+07
!  02        2     4.16e+09      3.2e+07          1      3.2e+07
!  03        3    4.192e+09      3.2e+07          1      3.2e+07
!  04        4    4.224e+09      3.2e+07          1      3.2e+07
!  05        5    4.416e+09      3.2e+07          1      3.2e+07
!  06        6    4.512e+09      3.2e+07          1      3.2e+07
!  07        7    4.544e+09      3.2e+07          1      3.2e+07
!  08        8    4.576e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 94 lines of history.
! 
! Reading 5368 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.3 
print "taper_size =", taper_size
! taper_size = 40 
![@/home/lpetrov/bin/01_muppet /scr/pima/bp192c4_uvs/J1439-3955_C]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.300x0.300 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001004Jy  sigma=12.213901
! Fit after  self-cal, rms=0.963648Jy  sigma=11.741046
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=11.46 mas, bmaj=56.8 mas, bpa=-22.5 degrees
! Estimated noise=1.29473 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0309367 Jy
! Component: 100  -  total flux cleaned = 0.0306836 Jy
! Total flux subtracted in 100 components = 0.0306836 Jy
! Clean residual min=-0.003741 max=0.003732 Jy/beam
! Clean residual mean=-0.000184 rms=0.001852 Jy/beam
! Combined flux in latest and established models = 0.0306836 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.0306836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.042531Jy  sigma=0.487369
! Fit after  self-cal, rms=0.041374Jy  sigma=0.471982
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.77 mas, bmaj=59.93 mas, bpa=-21.03 degrees
! Estimated noise=0.894613 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00253206 Jy
! Component: 100  -  total flux cleaned = 0.00265493 Jy
! Component: 150  -  total flux cleaned = 0.00155193 Jy
! Component: 200  -  total flux cleaned = 0.000172471 Jy
! Total flux subtracted in 200 components = 0.000172471 Jy
! Clean residual min=-0.001137 max=0.001101 Jy/beam
! Clean residual mean=-0.000015 rms=0.000556 Jy/beam
! Combined flux in latest and established models = 0.030856 Jy
! Performing phase self-cal
! Adding 122 model components to the UV plane model.
! The established model now contains 146 components and 0.0308561 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040499Jy  sigma=0.464523
! Fit after  self-cal, rms=0.040667Jy  sigma=0.463278
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.77 x 59.93 at -21.03 degrees (North through East)
! Clean map  min=-0.0040303  max=0.036743 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.97     KP        0.99     LA        0.90     OV        0.93     
!   PT        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00     KP        0.97     LA        0.94     OV        0.92     
!   PT        1.08     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.86     KP        1.13     LA        1.10     OV        0.89     
!   PT        0.90     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.00*    KP        1.00*    LA        1.00*    OV        1.00*    
!   PT        1.00*    
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.13     KP        0.94     LA        0.98     OV        1.13     
!   PT        1.06     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     KP        0.95     LA        0.86     OV        0.92     
!   PT        1.15     
! 
! 
! Fit before self-cal, rms=0.040667Jy  sigma=0.463278
! Fit after  self-cal, rms=0.039522Jy  sigma=0.460630
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=12.76 mas, bmaj=59.83 mas, bpa=-21.13 degrees
! Estimated noise=0.882963 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0009942 Jy
! Component: 100  -  total flux cleaned = 0.000861333 Jy
! Component: 150  -  total flux cleaned = 0.000194946 Jy
! Component: 200  -  total flux cleaned = -0.000479506 Jy
! Total flux subtracted in 200 components = -0.000479506 Jy
! Clean residual min=-0.000563 max=0.000560 Jy/beam
! Clean residual mean=0.000001 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.0303765 Jy
! Performing phase self-cal
! Adding 97 model components to the UV plane model.
! The established model now contains 240 components and 0.0303765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039325Jy  sigma=0.459954
! Fit after  self-cal, rms=0.039515Jy  sigma=0.459274
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039515Jy  sigma=0.459274
! Fit after  self-cal, rms=0.040453Jy  sigma=0.459077
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.74 mas, bmaj=59.7 mas, bpa=-21.2 degrees
! Estimated noise=0.89149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025854 Jy
! Component: 100  -  total flux cleaned = 8.68655e-05 Jy
! Component: 150  -  total flux cleaned = -0.000363533 Jy
! Component: 200  -  total flux cleaned = -0.000917304 Jy
! Total flux subtracted in 200 components = -0.000917304 Jy
! Clean residual min=-0.000442 max=0.000445 Jy/beam
! Clean residual mean=0.000005 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0294592 Jy
selfcal
! Performing phase self-cal
! Adding 103 model components to the UV plane model.
! The established model now contains 327 components and 0.0294592 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040346Jy  sigma=0.458705
! Fit after  self-cal, rms=0.040471Jy  sigma=0.458568
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033702 Jy
! Component: 100  -  total flux cleaned = 0.000336673 Jy
! Component: 150  -  total flux cleaned = 0.000361183 Jy
! Component: 200  -  total flux cleaned = 0.000266985 Jy
! Total flux subtracted in 200 components = 0.000266985 Jy
! Clean residual min=-0.000391 max=0.000391 Jy/beam
! Clean residual mean=0.000009 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0297262 Jy
! Performing phase self-cal
! Adding 89 model components to the UV plane model.
! The established model now contains 405 components and 0.0297262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040407Jy  sigma=0.458362
! Fit after  self-cal, rms=0.040437Jy  sigma=0.458310
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040437Jy  sigma=0.458310
! Fit after  self-cal, rms=0.040808Jy  sigma=0.457283
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=59.81 mas, bpa=-21.24 degrees
! Estimated noise=0.892011 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.09795e-05 Jy
! Component: 100  -  total flux cleaned = 5.51479e-05 Jy
! Component: 150  -  total flux cleaned = 0.000154595 Jy
! Component: 200  -  total flux cleaned = 0.000135365 Jy
! Total flux subtracted in 200 components = 0.000135365 Jy
! Clean residual min=-0.000321 max=0.000318 Jy/beam
! Clean residual mean=0.000000 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.0298616 Jy
selfcal
! Performing phase self-cal
! Adding 88 model components to the UV plane model.
! The established model now contains 486 components and 0.0298616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040768Jy  sigma=0.457191
! Fit after  self-cal, rms=0.040864Jy  sigma=0.456991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133435 Jy
! Component: 100  -  total flux cleaned = 0.000169359 Jy
! Component: 150  -  total flux cleaned = 0.00018591 Jy
! Component: 200  -  total flux cleaned = 0.000169672 Jy
! Total flux subtracted in 200 components = 0.000169672 Jy
! Clean residual min=-0.000266 max=0.000265 Jy/beam
! Clean residual mean=0.000002 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0300312 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 552 components and 0.0300313 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040835Jy  sigma=0.456928
! Fit after  self-cal, rms=0.040858Jy  sigma=0.456914
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040858Jy  sigma=0.456914
! Fit after  self-cal, rms=0.041080Jy  sigma=0.456867
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.91 mas, bmaj=59.53 mas, bpa=-21.19 degrees
! Estimated noise=0.889235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.19563e-05 Jy
! Component: 100  -  total flux cleaned = -3.34193e-05 Jy
! Component: 150  -  total flux cleaned = -2.00287e-05 Jy
! Component: 200  -  total flux cleaned = -2.03508e-05 Jy
! Total flux subtracted in 200 components = -2.03508e-05 Jy
! Clean residual min=-0.000204 max=0.000202 Jy/beam
! Clean residual mean=0.000002 rms=0.000106 Jy/beam
! Combined flux in latest and established models = 0.0300109 Jy
selfcal
! Performing phase self-cal
! Adding 78 model components to the UV plane model.
! The established model now contains 626 components and 0.0300109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041061Jy  sigma=0.456818
! Fit after  self-cal, rms=0.041107Jy  sigma=0.456796
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.71302e-05 Jy
! Component: 100  -  total flux cleaned = 9.25666e-05 Jy
! Component: 150  -  total flux cleaned = 8.02165e-05 Jy
! Component: 200  -  total flux cleaned = 0.000102854 Jy
! Total flux subtracted in 200 components = 0.000102854 Jy
! Clean residual min=-0.000188 max=0.000187 Jy/beam
! Clean residual mean=0.000003 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.0301138 Jy
! Performing phase self-cal
! Adding 80 model components to the UV plane model.
! The established model now contains 687 components and 0.0301138 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041092Jy  sigma=0.456760
! Fit after  self-cal, rms=0.041106Jy  sigma=0.456754
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=59.83 mas, bpa=-21.25 degrees
! Estimated noise=0.892446 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.75 x 59.83 at -21.25 degrees (North through East)
! Clean map  min=-0.0037534  max=0.036191 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.32 mas, bmaj=56.8 mas, bpa=-22.98 degrees
! Estimated noise=1.24668 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0290779 Jy
! Component: 100  -  total flux cleaned = 0.0264399 Jy
! Component: 150  -  total flux cleaned = 0.022928 Jy
! Component: 200  -  total flux cleaned = 0.0204282 Jy
! Total flux subtracted in 200 components = 0.0204282 Jy
! Clean residual min=-0.002304 max=0.002274 Jy/beam
! Clean residual mean=-0.000078 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.0204282 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 108 model components to the UV plane model.
! The established model now contains 108 components and 0.0204282 Jy
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=59.83 mas, bpa=-21.25 degrees
! Estimated noise=0.892446 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00249713 Jy
! Component: 100  -  total flux cleaned = 0.00206271 Jy
! Component: 150  -  total flux cleaned = 0.00127511 Jy
! Component: 200  -  total flux cleaned = 0.000476512 Jy
! Total flux subtracted in 200 components = 0.000476512 Jy
! Clean residual min=-0.000955 max=0.000951 Jy/beam
! Clean residual mean=0.000003 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0209047 Jy
! Adding 127 model components to the UV plane model.
! The established model now contains 235 components and 0.0209047 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 40 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=12.91 mas, bmaj=59.53 mas, bpa=-21.19 degrees
! Estimated noise=0.889235 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000237661 Jy
! Component: 100  -  total flux cleaned = -0.000571025 Jy
! Component: 150  -  total flux cleaned = -0.000940561 Jy
! Component: 200  -  total flux cleaned = -0.00140052 Jy
! Total flux subtracted in 200 components = -0.00140052 Jy
! Clean residual min=-0.000519 max=0.000518 Jy/beam
! Clean residual mean=0.000006 rms=0.000285 Jy/beam
! Combined flux in latest and established models = 0.0195042 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000449488 Jy
! Component: 100  -  total flux cleaned = -0.000753953 Jy
! Component: 150  -  total flux cleaned = -0.00104148 Jy
! Component: 200  -  total flux cleaned = -0.00133889 Jy
! Total flux subtracted in 200 components = -0.00133889 Jy
! Clean residual min=-0.000399 max=0.000398 Jy/beam
! Clean residual mean=0.000001 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0181653 Jy
! Adding 136 model components to the UV plane model.
! The established model now contains 370 components and 0.0181653 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=12.75 mas, bmaj=59.83 mas, bpa=-21.25 degrees
! Estimated noise=0.892446 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449431 Jy
! Component: 100  -  total flux cleaned = 0.000716683 Jy
! Component: 150  -  total flux cleaned = 0.000943533 Jy
! Component: 200  -  total flux cleaned = 0.00114348 Jy
! Total flux subtracted in 200 components = 0.00114348 Jy
! Clean residual min=-0.000246 max=0.000248 Jy/beam
! Clean residual mean=0.000013 rms=0.000122 Jy/beam
! Combined flux in latest and established models = 0.0193088 Jy
selfcal
! Performing phase self-cal
! Adding 85 model components to the UV plane model.
! The established model now contains 455 components and 0.0193088 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.041117Jy  sigma=0.456865
! Fit after  self-cal, rms=0.041117Jy  sigma=0.456828
wmodel /scr/pima/bp192c4_uvs/J1439-3955_C_map.mod
! Writing 455 model components to file: /scr/pima/bp192c4_uvs/J1439-3955_C_map.mod
wobs /scr/pima/bp192c4_uvs/J1439-3955_C_uvs.fits
! Writing UV FITS file: /scr/pima/bp192c4_uvs/J1439-3955_C_uvs.fits
wwins /scr/pima/bp192c4_uvs/J1439-3955_C_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/bp192c4_uvs/J1439-3955_C\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 12.75 x 59.83 at -21.25 degrees (North through East)
! Clean map  min=-0.0053329  max=0.03387 Jy/beam
! Writing clean map to FITS file: /scr/pima/bp192c4_uvs/J1439-3955_C_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0338701 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000119408 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05764 1.05764 2.11527 4.23054 8.46108 16.9222 33.8443 67.6886
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.033 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  283.651 
quit
! Quitting program
! Log file /scr/pima/bp192c4_uvs/J1439-3955_C_uvs.log closed on Mon May 30 11:18:07 2016