! Started logfile: /vlbi/bp222/maps//J2320+0513_X_dfm.log on Thu Sep 27 11:44:36 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J2320+0513_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J2320+0513_X_uvm.fits ! AN table 1: 16 integrations on 28 of 28 possible baselines. ! AN table 2: 16 integrations on 36 of 36 possible baselines. ! AN table 3: 32 integrations on 28 of 28 possible baselines. ! Apparent sampling: 1.43021 visibilities/baseline/integration-bin. ! Found source: J2320+0513 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 32952 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2320+0513_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 11 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.294006Jy sigma=22.552596 ! Fit after self-cal, rms=0.243720Jy sigma=3.629071 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7025 mas, bmaj=1.805 mas, bpa=-4.971 degrees ! Estimated noise=0.545116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.598299 Jy ! Component: 100 - total flux cleaned = 0.767519 Jy ! Total flux subtracted in 100 components = 0.767519 Jy ! Clean residual min=-0.027769 max=0.067903 Jy/beam ! Clean residual mean=0.000002 rms=0.006346 Jy/beam ! Combined flux in latest and established models = 0.767519 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.767519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.131850Jy sigma=2.351210 ! Fit after self-cal, rms=0.131508Jy sigma=2.346821 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0725857 Jy ! Component: 100 - total flux cleaned = 0.108742 Jy ! Total flux subtracted in 100 components = 0.108742 Jy ! Clean residual min=-0.014853 max=0.019636 Jy/beam ! Clean residual mean=0.000003 rms=0.002970 Jy/beam ! Combined flux in latest and established models = 0.876261 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 11 components and 0.876261 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086076Jy sigma=1.397456 ! Fit after self-cal, rms=0.085949Jy sigma=1.395187 ! Inverting map ! Added new window around map position (-5, 12). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206989 Jy ! Component: 100 - total flux cleaned = 0.0229885 Jy ! Total flux subtracted in 100 components = 0.0229885 Jy ! Clean residual min=-0.013915 max=0.014287 Jy/beam ! Clean residual mean=0.000002 rms=0.002512 Jy/beam ! Combined flux in latest and established models = 0.899249 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.899249 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.082489Jy sigma=1.312484 ! Fit after self-cal, rms=0.082408Jy sigma=1.310310 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9516 mas, bmaj=2.281 mas, bpa=-5.677 degrees ! Estimated noise=0.292502 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.8, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0136899 Jy ! Component: 100 - total flux cleaned = 0.0156608 Jy ! Component: 150 - total flux cleaned = 0.0173028 Jy ! Component: 200 - total flux cleaned = 0.0180345 Jy ! Total flux subtracted in 200 components = 0.0180345 Jy ! Clean residual min=-0.009571 max=0.013117 Jy/beam ! Clean residual mean=0.000002 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.917284 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 50 components and 0.917284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079724Jy sigma=1.253038 ! Fit after self-cal, rms=0.079608Jy sigma=1.249745 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9516 x 2.281 at -5.677 degrees (North through East) ! Clean map min=-0.0087126 max=0.8039 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.97 KP 1.08 ! LA 1.00 NL 0.96 OV 1.00 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 1.04 KP 1.01 LA 0.98 ! MK 0.99 NL 0.92 OV 1.02 PT 1.04 ! SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.97 FD 0.95 HN 0.98 LA 1.03 ! MK 0.99 NL 0.99 OV 0.96 PT 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.99 KP 1.08 ! LA 1.01 NL 0.96 OV 0.99 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 KP 1.01 LA 0.98 ! MK 1.01 NL 0.93 OV 1.01 PT 1.06 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.97 HN 0.98 LA 1.03 ! MK 0.97 NL 1.01 OV 0.96 PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.00 KP 1.09 ! LA 1.00 NL 0.95 OV 1.01 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.00 LA 0.98 ! MK 1.01 NL 0.94 OV 1.01 PT 1.06 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.97 HN 1.00 LA 1.06 ! MK 0.99 NL 1.02 OV 0.98 PT 0.98 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.98 KP 1.09 ! LA 1.01 NL 0.96 OV 0.98 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.01 LA 1.00 ! MK 1.02 NL 0.95 OV 1.02 PT 1.06 ! SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.96 HN 0.98 LA 1.04 ! MK 0.99 NL 1.00 OV 0.97 PT 0.98 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.02 HN 0.99 KP 1.10 ! LA 1.01 NL 0.96 OV 1.01 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.02 KP 1.02 LA 0.98 ! MK 1.00 NL 0.94 OV 1.02 PT 1.06 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 0.97 LA 1.05 ! MK 1.00 NL 1.02 OV 0.97 PT 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 1.00 KP 1.10 ! LA 1.00 NL 0.98 OV 1.00 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.03 KP 1.02 LA 0.98 ! MK 0.97 NL 0.93 OV 1.01 PT 1.06 ! SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.96 HN 0.98 LA 1.05 ! MK 1.00 NL 1.03 OV 0.97 PT 0.98 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.98 KP 1.10 ! LA 1.00 NL 0.96 OV 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 KP 1.03 LA 0.97 ! MK 1.01 NL 0.94 OV 1.01 PT 1.05 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.00 LA 1.06 ! MK 1.00 NL 1.01 OV 0.98 PT 0.98 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.01 HN 0.99 KP 1.10 ! LA 1.00 NL 0.98 OV 1.01 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.02 KP 1.01 LA 0.99 ! MK 1.00 NL 0.94 OV 1.01 PT 1.06 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.98 HN 1.00 LA 1.05 ! MK 1.00 NL 1.02 OV 0.99 PT 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.00 KP 1.11 ! LA 1.02 NL 0.98 OV 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.02 LA 0.98 ! MK 1.01 NL 0.93 OV 1.01 PT 1.07 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.95 HN 1.01 LA 1.06 ! MK 0.99 NL 1.03 OV 0.98 PT 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 0.99 KP 1.10 ! LA 1.03 NL 0.98 OV 1.00 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 KP 1.01 LA 0.98 ! MK 1.01 NL 0.93 OV 1.01 PT 1.07 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.96 HN 0.99 LA 1.07 ! MK 0.98 NL 1.02 OV 0.97 PT 0.98 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 0.99 KP 1.14 ! LA 1.00 NL 0.99 OV 1.00 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.02 KP 1.01 LA 0.98 ! MK 1.01 NL 0.93 OV 1.01 PT 1.06 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.95 HN 0.97 LA 1.08 ! MK 1.00 NL 1.02 OV 0.96 PT 0.98 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00 HN 0.99 KP 1.10 ! LA 1.01 NL 0.99 OV 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 KP 1.02 LA 0.97 ! MK 0.97 NL 0.94 OV 1.02 PT 1.07 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.93 HN 0.97 LA 1.08 ! MK 0.98 NL 1.01 OV 0.96 PT 0.98 ! ! ! Fit before self-cal, rms=0.079608Jy sigma=1.249745 ! Fit after self-cal, rms=0.070484Jy sigma=1.086619 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9497 mas, bmaj=2.274 mas, bpa=-5.724 degrees ! Estimated noise=0.290361 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00618295 Jy ! Component: 100 - total flux cleaned = -0.0081553 Jy ! Component: 150 - total flux cleaned = -0.00923071 Jy ! Component: 200 - total flux cleaned = -0.0100478 Jy ! Total flux subtracted in 200 components = -0.0100478 Jy ! Clean residual min=-0.006039 max=0.005669 Jy/beam ! Clean residual mean=-0.000001 rms=0.001309 Jy/beam ! Combined flux in latest and established models = 0.907236 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 66 components and 0.907236 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069572Jy sigma=1.075951 ! Fit after self-cal, rms=0.069594Jy sigma=1.075487 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069594Jy sigma=1.075487 ! Fit after self-cal, rms=0.065673Jy sigma=1.022671 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9495 mas, bmaj=2.272 mas, bpa=-5.698 degrees ! Estimated noise=0.290785 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00286754 Jy ! Component: 100 - total flux cleaned = -0.0029773 Jy ! Component: 150 - total flux cleaned = -0.00297076 Jy ! Component: 200 - total flux cleaned = -0.00314178 Jy ! Total flux subtracted in 200 components = -0.00314178 Jy ! Clean residual min=-0.003462 max=0.004045 Jy/beam ! Clean residual mean=-0.000000 rms=0.000756 Jy/beam ! Combined flux in latest and established models = 0.904095 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 86 components and 0.904095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065277Jy sigma=1.016405 ! Fit after self-cal, rms=0.065250Jy sigma=1.015873 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9, 7.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00257089 Jy ! Component: 100 - total flux cleaned = 0.00290344 Jy ! Component: 150 - total flux cleaned = 0.00289676 Jy ! Component: 200 - total flux cleaned = 0.00283588 Jy ! Total flux subtracted in 200 components = 0.00283588 Jy ! Clean residual min=-0.003122 max=0.003380 Jy/beam ! Clean residual mean=0.000000 rms=0.000670 Jy/beam ! Combined flux in latest and established models = 0.90693 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 102 components and 0.90693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065017Jy sigma=1.011569 ! Fit after self-cal, rms=0.064994Jy sigma=1.011342 ! Inverting map ! Added new window around map position (3.2, 12.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118211 Jy ! Component: 100 - total flux cleaned = 0.000811252 Jy ! Component: 150 - total flux cleaned = 0.00114906 Jy ! Component: 200 - total flux cleaned = 0.00103449 Jy ! Total flux subtracted in 200 components = 0.00103449 Jy ! Clean residual min=-0.002921 max=0.002733 Jy/beam ! Clean residual mean=0.000000 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 0.907965 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 114 components and 0.907965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064722Jy sigma=1.007221 ! Fit after self-cal, rms=0.064707Jy sigma=1.006958 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064707Jy sigma=1.006958 ! Fit after self-cal, rms=0.064667Jy sigma=1.004797 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9487 mas, bmaj=2.272 mas, bpa=-5.702 degrees ! Estimated noise=0.29083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00115277 Jy ! Component: 100 - total flux cleaned = -0.00144228 Jy ! Component: 150 - total flux cleaned = -0.00144771 Jy ! Component: 200 - total flux cleaned = -0.00156698 Jy ! Total flux subtracted in 200 components = -0.00156698 Jy ! Clean residual min=-0.002393 max=0.002613 Jy/beam ! Clean residual mean=0.000000 rms=0.000530 Jy/beam ! Combined flux in latest and established models = 0.906398 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 125 components and 0.906398 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064512Jy sigma=1.002579 ! Fit after self-cal, rms=0.064502Jy sigma=1.002407 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.8, -22.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00160067 Jy ! Component: 100 - total flux cleaned = 0.00210227 Jy ! Component: 150 - total flux cleaned = 0.00250638 Jy ! Component: 200 - total flux cleaned = 0.00274286 Jy ! Total flux subtracted in 200 components = 0.00274286 Jy ! Clean residual min=-0.002173 max=0.002100 Jy/beam ! Clean residual mean=0.000000 rms=0.000484 Jy/beam ! Combined flux in latest and established models = 0.909141 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.909141 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064383Jy sigma=1.000615 ! Fit after self-cal, rms=0.064382Jy sigma=1.000554 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064382Jy sigma=1.000554 ! Fit after self-cal, rms=0.064414Jy sigma=1.000205 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.116 mas, bmaj=3.227 mas, bpa=-3.821 degrees ! Estimated noise=0.354793 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136009 Jy ! Component: 100 - total flux cleaned = 0.000260467 Jy ! Component: 150 - total flux cleaned = 0.000338452 Jy ! Component: 200 - total flux cleaned = 0.000372702 Jy ! Total flux subtracted in 200 components = 0.000372702 Jy ! Clean residual min=-0.002146 max=0.001940 Jy/beam ! Clean residual mean=-0.000000 rms=0.000528 Jy/beam ! Combined flux in latest and established models = 0.909514 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 157 components and 0.909514 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064389Jy sigma=0.999806 ! Fit after self-cal, rms=0.064387Jy sigma=0.999774 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.77933e-05 Jy ! Component: 100 - total flux cleaned = 7.63492e-05 Jy ! Component: 150 - total flux cleaned = 7.55251e-05 Jy ! Component: 200 - total flux cleaned = 5.11291e-05 Jy ! Total flux subtracted in 200 components = 5.11291e-05 Jy ! Clean residual min=-0.001937 max=0.001806 Jy/beam ! Clean residual mean=-0.000000 rms=0.000495 Jy/beam ! Combined flux in latest and established models = 0.909565 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 162 components and 0.909565 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064377Jy sigma=0.999626 ! Fit after self-cal, rms=0.064375Jy sigma=0.999611 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9483 mas, bmaj=2.272 mas, bpa=-5.702 degrees ! Estimated noise=0.29088 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9483 x 2.272 at -5.702 degrees (North through East) ! Clean map min=-0.0038335 max=0.80111 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064375Jy sigma=0.999611 ! Fit after self-cal, rms=0.060226Jy sigma=0.912656 ! Inverting map and beam ! Estimated beam: bmin=0.9486 mas, bmaj=2.272 mas, bpa=-5.709 degrees ! Estimated noise=0.290942 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122631 Jy ! Component: 100 - total flux cleaned = -0.000213505 Jy ! Component: 150 - total flux cleaned = -3.82174e-05 Jy ! Component: 200 - total flux cleaned = 0.000126608 Jy ! Total flux subtracted in 200 components = 0.000126608 Jy ! Clean residual min=-0.002051 max=0.001970 Jy/beam ! Clean residual mean=0.000000 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.909691 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 173 components and 0.909691 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060144Jy sigma=0.911641 ! Fit after self-cal, rms=0.060141Jy sigma=0.911602 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.88971e-05 Jy ! Component: 100 - total flux cleaned = 9.46127e-05 Jy ! Component: 150 - total flux cleaned = 0.000242654 Jy ! Component: 200 - total flux cleaned = 0.000386037 Jy ! Total flux subtracted in 200 components = 0.000386037 Jy ! Clean residual min=-0.002027 max=0.001937 Jy/beam ! Clean residual mean=0.000000 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.910077 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 180 components and 0.910077 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060088Jy sigma=0.910965 ! Fit after self-cal, rms=0.060088Jy sigma=0.910952 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060088Jy sigma=0.910952 ! Fit after self-cal, rms=0.060107Jy sigma=0.910792 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7012 mas, bmaj=1.8 mas, bpa=-4.982 degrees ! Estimated noise=0.540615 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.593292 Jy ! Component: 100 - total flux cleaned = 0.763393 Jy ! Component: 150 - total flux cleaned = 0.836199 Jy ! Component: 200 - total flux cleaned = 0.872823 Jy ! Total flux subtracted in 200 components = 0.872823 Jy ! Clean residual min=-0.009918 max=0.016994 Jy/beam ! Clean residual mean=0.000001 rms=0.001801 Jy/beam ! Combined flux in latest and established models = 0.872823 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.872823 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9481 mas, bmaj=2.272 mas, bpa=-5.705 degrees ! Estimated noise=0.290988 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190217 Jy ! Component: 100 - total flux cleaned = 0.0272335 Jy ! Component: 150 - total flux cleaned = 0.030494 Jy ! Component: 200 - total flux cleaned = 0.0327347 Jy ! Total flux subtracted in 200 components = 0.0327347 Jy ! Clean residual min=-0.004133 max=0.003487 Jy/beam ! Clean residual mean=-0.000001 rms=0.000710 Jy/beam ! Combined flux in latest and established models = 0.905558 Jy ! Adding 21 model components to the UV plane model. ! The established model now contains 27 components and 0.905558 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.115 mas, bmaj=3.227 mas, bpa=-3.836 degrees ! Estimated noise=0.355043 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315722 Jy ! Component: 100 - total flux cleaned = 0.00482064 Jy ! Component: 150 - total flux cleaned = 0.00592804 Jy ! Component: 200 - total flux cleaned = 0.00685468 Jy ! Total flux subtracted in 200 components = 0.00685468 Jy ! Clean residual min=-0.002800 max=0.002851 Jy/beam ! Clean residual mean=-0.000001 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.912412 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.2, -40.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00204669 Jy ! Component: 100 - total flux cleaned = 0.00280293 Jy ! Component: 150 - total flux cleaned = 0.00316311 Jy ! Component: 200 - total flux cleaned = 0.00340081 Jy ! Total flux subtracted in 200 components = 0.00340081 Jy ! Clean residual min=-0.002233 max=0.001908 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.915813 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 82 components and 0.915813 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9481 mas, bmaj=2.272 mas, bpa=-5.705 degrees ! Estimated noise=0.290988 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000680051 Jy ! Component: 100 - total flux cleaned = 0.000299573 Jy ! Component: 150 - total flux cleaned = 0.000475654 Jy ! Component: 200 - total flux cleaned = 0.000225407 Jy ! Total flux subtracted in 200 components = 0.000225407 Jy ! Clean residual min=-0.002984 max=0.002364 Jy/beam ! Clean residual mean=0.000000 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 0.916039 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 102 components and 0.916039 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060644Jy sigma=0.919151 ! Fit after self-cal, rms=0.060576Jy sigma=0.918178 wmodel J2320+0513_X_map.mod ! Writing 102 model components to file: J2320+0513_X_map.mod wobs J2320+0513_X_uvs.fits ! Writing UV FITS file: J2320+0513_X_uvs.fits wwins J2320+0513_X_map.win ! wwins: Wrote 7 windows to J2320+0513_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00105734 Jy ! Component: 100 - total flux cleaned = -0.00101557 Jy ! Component: 150 - total flux cleaned = -0.000934986 Jy ! Component: 200 - total flux cleaned = -0.000817536 Jy ! Component: 250 - total flux cleaned = -0.000667966 Jy ! Component: 300 - total flux cleaned = -0.00045182 Jy ! Component: 350 - total flux cleaned = -0.000347329 Jy ! Component: 400 - total flux cleaned = -0.00031352 Jy ! Component: 450 - total flux cleaned = -0.000215184 Jy ! Component: 500 - total flux cleaned = -0.000215549 Jy ! Component: 550 - total flux cleaned = -5.84362e-05 Jy ! Component: 600 - total flux cleaned = 0.000155595 Jy ! Component: 650 - total flux cleaned = 0.00036496 Jy ! Component: 700 - total flux cleaned = 0.000569998 Jy ! Component: 750 - total flux cleaned = 0.000828627 Jy ! Component: 800 - total flux cleaned = 0.00105401 Jy ! Component: 850 - total flux cleaned = 0.00133041 Jy ! Component: 900 - total flux cleaned = 0.00165557 Jy ! Component: 950 - total flux cleaned = 0.00197424 Jy ! Component: 1000 - total flux cleaned = 0.00218336 Jy ! Component: 1050 - total flux cleaned = 0.00251682 Jy ! Component: 1100 - total flux cleaned = 0.00276844 Jy ! Component: 1150 - total flux cleaned = 0.00301617 Jy ! Component: 1200 - total flux cleaned = 0.00325984 Jy ! Component: 1250 - total flux cleaned = 0.00354717 Jy ! Component: 1300 - total flux cleaned = 0.0037353 Jy ! Component: 1350 - total flux cleaned = 0.00389777 Jy ! Component: 1400 - total flux cleaned = 0.00408032 Jy ! Component: 1450 - total flux cleaned = 0.00430587 Jy ! Component: 1500 - total flux cleaned = 0.00452741 Jy ! Component: 1550 - total flux cleaned = 0.00463681 Jy ! Component: 1600 - total flux cleaned = 0.00485264 Jy ! Component: 1650 - total flux cleaned = 0.00495864 Jy ! Component: 1700 - total flux cleaned = 0.00500053 Jy ! Component: 1750 - total flux cleaned = 0.00510436 Jy ! Component: 1800 - total flux cleaned = 0.00524794 Jy ! Component: 1850 - total flux cleaned = 0.00530851 Jy ! Component: 1900 - total flux cleaned = 0.00536891 Jy ! Component: 1950 - total flux cleaned = 0.00548746 Jy ! Component: 2000 - total flux cleaned = 0.00552637 Jy ! Component: 2050 - total flux cleaned = 0.00560313 Jy ! Component: 2100 - total flux cleaned = 0.00562268 Jy ! Component: 2150 - total flux cleaned = 0.00566073 Jy ! Component: 2200 - total flux cleaned = 0.00575395 Jy ! Component: 2250 - total flux cleaned = 0.00582768 Jy ! Component: 2300 - total flux cleaned = 0.00588246 Jy ! Component: 2350 - total flux cleaned = 0.00597275 Jy ! Component: 2400 - total flux cleaned = 0.0060265 Jy ! Component: 2450 - total flux cleaned = 0.00611519 Jy ! Component: 2500 - total flux cleaned = 0.00615033 Jy ! Component: 2550 - total flux cleaned = 0.00630682 Jy ! Component: 2600 - total flux cleaned = 0.00634125 Jy ! Component: 2650 - total flux cleaned = 0.00639273 Jy ! Component: 2700 - total flux cleaned = 0.0064435 Jy ! Component: 2750 - total flux cleaned = 0.00649374 Jy ! Component: 2800 - total flux cleaned = 0.00659339 Jy ! Component: 2850 - total flux cleaned = 0.00662616 Jy ! Component: 2900 - total flux cleaned = 0.00674047 Jy ! Component: 2950 - total flux cleaned = 0.00674048 Jy ! Component: 3000 - total flux cleaned = 0.00685253 Jy ! Component: 3050 - total flux cleaned = 0.00690021 Jy ! Component: 3100 - total flux cleaned = 0.00693164 Jy ! Component: 3150 - total flux cleaned = 0.00704108 Jy ! Component: 3200 - total flux cleaned = 0.00708755 Jy ! Component: 3250 - total flux cleaned = 0.00713391 Jy ! Component: 3300 - total flux cleaned = 0.00722529 Jy ! Component: 3350 - total flux cleaned = 0.00733101 Jy ! Component: 3400 - total flux cleaned = 0.00734597 Jy ! Component: 3450 - total flux cleaned = 0.00744992 Jy ! Component: 3500 - total flux cleaned = 0.00753832 Jy ! Component: 3550 - total flux cleaned = 0.00758225 Jy ! Component: 3600 - total flux cleaned = 0.00758225 Jy ! Component: 3650 - total flux cleaned = 0.00768279 Jy ! Component: 3700 - total flux cleaned = 0.0078113 Jy ! Component: 3750 - total flux cleaned = 0.00779713 Jy ! Component: 3800 - total flux cleaned = 0.00788151 Jy ! Component: 3850 - total flux cleaned = 0.00790941 Jy ! Component: 3900 - total flux cleaned = 0.00796482 Jy ! Component: 3950 - total flux cleaned = 0.00801969 Jy ! Component: 4000 - total flux cleaned = 0.00806065 Jy ! Component: 4050 - total flux cleaned = 0.00808773 Jy ! Total flux subtracted in 4096 components = 0.00812802 Jy ! Clean residual min=-0.000731 max=0.000670 Jy/beam ! Clean residual mean=0.000000 rms=0.000218 Jy/beam ! Combined flux in latest and established models = 0.924167 Jy keep ! Adding 198 model components to the UV plane model. ! The established model now contains 298 components and 0.924166 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J2320+0513_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9481 x 2.272 at -5.705 degrees (North through East) ! Clean map min=-0.0020307 max=0.8013 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J2320+0513_X_map.fits wmodel /vlbi/bp222/maps//J2320+0513_X_map.mod ! Writing 298 model components to file: /vlbi/bp222/maps//J2320+0513_X_map.mod wobs /vlbi/bp222/maps//J2320+0513_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J2320+0513_X_uvs.fits wwins /vlbi/bp222/maps//J2320+0513_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J2320+0513_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.801299 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000217971 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0816066 0.0816066 0.163213 0.326426 0.652853 1.30571 2.61141 5.22282 10.4456 20.8913 41.7826 83.5651 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.801 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 3676.17 quit ! Quitting program ! Log file /vlbi/bp222/maps//J2320+0513_X_dfm.log closed on Thu Sep 27 11:44:41 2018