! Started logfile: /vlbi/bp222/maps//J1850+2825_X_dfm.log on Thu Sep 27 11:30:51 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1850+2825_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1850+2825_X_uvm.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! AN table 2: 28 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.971925 visibilities/baseline/integration-bin. ! Found source: J1850+2825 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 26172 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1850+2825_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 18 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.466041Jy sigma=18.355618 ! Fit after self-cal, rms=0.388497Jy sigma=4.709853 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6851 mas, bmaj=1.926 mas, bpa=0.728 degrees ! Estimated noise=0.689023 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.697388 Jy ! Component: 100 - total flux cleaned = 0.988491 Jy ! Total flux subtracted in 100 components = 0.988491 Jy ! Clean residual min=-0.041361 max=0.135746 Jy/beam ! Clean residual mean=-0.000075 rms=0.010698 Jy/beam ! Combined flux in latest and established models = 0.988491 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.988491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.274315Jy sigma=3.347092 ! Fit after self-cal, rms=0.271120Jy sigma=3.305941 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.157161 Jy ! Component: 100 - total flux cleaned = 0.240291 Jy ! Total flux subtracted in 100 components = 0.240291 Jy ! Clean residual min=-0.017533 max=0.039920 Jy/beam ! Clean residual mean=-0.000008 rms=0.003832 Jy/beam ! Combined flux in latest and established models = 1.22878 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 1.22878 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.113998Jy sigma=1.336697 ! Fit after self-cal, rms=0.113013Jy sigma=1.323207 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0463891 Jy ! Component: 100 - total flux cleaned = 0.0714874 Jy ! Total flux subtracted in 100 components = 0.0714874 Jy ! Clean residual min=-0.015780 max=0.012347 Jy/beam ! Clean residual mean=0.000012 rms=0.002535 Jy/beam ! Combined flux in latest and established models = 1.30027 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 11 components and 1.30027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.085871Jy sigma=1.018463 ! Fit after self-cal, rms=0.085758Jy sigma=1.016677 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9107 mas, bmaj=2.231 mas, bpa=0.7481 degrees ! Estimated noise=0.375947 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171434 Jy ! Component: 100 - total flux cleaned = 0.0247144 Jy ! Component: 150 - total flux cleaned = 0.026848 Jy ! Component: 200 - total flux cleaned = 0.0272257 Jy ! Total flux subtracted in 200 components = 0.0272257 Jy ! Clean residual min=-0.020054 max=0.011607 Jy/beam ! Clean residual mean=0.000004 rms=0.003120 Jy/beam ! Combined flux in latest and established models = 1.32749 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 33 components and 1.3275 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.081035Jy sigma=0.986318 ! Fit after self-cal, rms=0.080975Jy sigma=0.985522 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9107 x 2.231 at 0.7481 degrees (North through East) ! Clean map min=-0.019206 max=0.97182 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.02 KP 1.03 LA 1.00 ! MK 1.00 NL 0.92 OV 1.01 PT 1.04 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.95 LA 0.95 MK 0.98 ! NL 0.96 OV 0.98 PT 0.97 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.00 KP 1.05 LA 0.99 ! MK 1.00 NL 0.92 OV 1.01 PT 1.06 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 LA 0.96 MK 0.97 ! NL 0.97 OV 0.98 PT 0.96 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 KP 1.03 LA 0.98 ! MK 1.01 NL 0.93 OV 1.02 PT 1.05 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.95 LA 0.96 MK 0.97 ! NL 0.97 OV 0.98 PT 0.96 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 1.05 LA 1.00 ! MK 1.01 NL 0.94 OV 1.01 PT 1.05 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 LA 0.97 MK 1.00 ! NL 0.98 OV 0.97 PT 0.96 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 KP 1.05 LA 0.99 ! MK 1.00 NL 0.92 OV 1.01 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 LA 0.97 MK 0.97 ! NL 0.97 OV 0.98 PT 0.98 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 KP 1.04 LA 0.99 ! MK 0.99 NL 0.93 OV 1.00 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 LA 0.95 MK 0.98 ! NL 0.97 OV 0.97 PT 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.01 KP 1.06 LA 0.98 ! MK 1.00 NL 0.93 OV 1.01 PT 1.05 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.96 LA 0.96 MK 0.99 ! NL 0.97 OV 0.98 PT 0.96 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 1.01 KP 1.03 LA 1.00 ! MK 1.00 NL 0.93 OV 1.01 PT 1.05 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.98 LA 0.99 MK 0.97 ! NL 0.96 OV 0.99 PT 0.96 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 1.00 KP 1.05 LA 0.99 ! MK 1.02 NL 0.93 OV 1.00 PT 1.07 ! SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.96 LA 0.96 MK 0.97 ! NL 0.98 OV 0.98 PT 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.01 KP 1.03 LA 0.99 ! MK 1.02 NL 0.92 OV 1.00 PT 1.07 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.99 LA 0.96 MK 0.96 ! NL 0.97 OV 0.97 PT 0.96 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.00 KP 1.04 LA 0.99 ! MK 1.00 NL 0.92 OV 1.01 PT 1.06 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.96 LA 0.98 MK 0.99 ! NL 0.96 OV 0.98 PT 0.96 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.99 KP 1.04 LA 0.97 ! MK 1.00 NL 0.92 OV 1.01 PT 1.06 ! SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.03 FD 0.96 LA 0.98 MK 0.97 ! NL 0.99 OV 0.97 PT 0.98 ! ! ! Fit before self-cal, rms=0.080975Jy sigma=0.985522 ! Fit after self-cal, rms=0.058163Jy sigma=0.679923 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9114 mas, bmaj=2.233 mas, bpa=0.5058 degrees ! Estimated noise=0.375065 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00452866 Jy ! Component: 100 - total flux cleaned = 0.00496256 Jy ! Component: 150 - total flux cleaned = 0.00530264 Jy ! Component: 200 - total flux cleaned = 0.00565909 Jy ! Total flux subtracted in 200 components = 0.00565909 Jy ! Clean residual min=-0.003802 max=0.003627 Jy/beam ! Clean residual mean=-0.000008 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 1.33315 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 40 components and 1.33315 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057381Jy sigma=0.671581 ! Fit after self-cal, rms=0.057369Jy sigma=0.671344 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057369Jy sigma=0.671344 ! Fit after self-cal, rms=0.056180Jy sigma=0.651239 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9091 mas, bmaj=2.229 mas, bpa=0.3808 degrees ! Estimated noise=0.374628 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344246 Jy ! Component: 100 - total flux cleaned = 0.00401332 Jy ! Component: 150 - total flux cleaned = 0.00449254 Jy ! Component: 200 - total flux cleaned = 0.00490015 Jy ! Total flux subtracted in 200 components = 0.00490015 Jy ! Clean residual min=-0.002439 max=0.002934 Jy/beam ! Clean residual mean=-0.000002 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 1.33805 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 1.33805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055782Jy sigma=0.647427 ! Fit after self-cal, rms=0.055769Jy sigma=0.647251 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.8, 17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026157 Jy ! Component: 100 - total flux cleaned = 0.00342948 Jy ! Component: 150 - total flux cleaned = 0.0040028 Jy ! Component: 200 - total flux cleaned = 0.00451016 Jy ! Total flux subtracted in 200 components = 0.00451016 Jy ! Clean residual min=-0.002260 max=0.002470 Jy/beam ! Clean residual mean=-0.000002 rms=0.000497 Jy/beam ! Combined flux in latest and established models = 1.34256 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 51 components and 1.34256 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055592Jy sigma=0.645122 ! Fit after self-cal, rms=0.055584Jy sigma=0.644969 ! Inverting map ! Added new window around map position (5, -17.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0017954 Jy ! Component: 100 - total flux cleaned = 0.00216884 Jy ! Component: 150 - total flux cleaned = 0.00251153 Jy ! Component: 200 - total flux cleaned = 0.00278266 Jy ! Total flux subtracted in 200 components = 0.00278266 Jy ! Clean residual min=-0.002133 max=0.002157 Jy/beam ! Clean residual mean=-0.000003 rms=0.000478 Jy/beam ! Combined flux in latest and established models = 1.34535 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 64 components and 1.34535 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055450Jy sigma=0.643746 ! Fit after self-cal, rms=0.055447Jy sigma=0.643694 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.055447Jy sigma=0.643694 ! Fit after self-cal, rms=0.053795Jy sigma=0.632468 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9074 mas, bmaj=2.227 mas, bpa=0.2812 degrees ! Estimated noise=0.374039 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.00199e-05 Jy ! Component: 100 - total flux cleaned = -0.000161085 Jy ! Component: 150 - total flux cleaned = -0.000331036 Jy ! Component: 200 - total flux cleaned = -0.00048239 Jy ! Total flux subtracted in 200 components = -0.00048239 Jy ! Clean residual min=-0.001458 max=0.001434 Jy/beam ! Clean residual mean=-0.000001 rms=0.000314 Jy/beam ! Combined flux in latest and established models = 1.34486 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 79 components and 1.34486 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053708Jy sigma=0.631574 ! Fit after self-cal, rms=0.053702Jy sigma=0.631513 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000244924 Jy ! Component: 100 - total flux cleaned = 0.00010748 Jy ! Component: 150 - total flux cleaned = -2.13057e-05 Jy ! Component: 200 - total flux cleaned = -0.000140917 Jy ! Total flux subtracted in 200 components = -0.000140917 Jy ! Clean residual min=-0.001435 max=0.001354 Jy/beam ! Clean residual mean=-0.000001 rms=0.000305 Jy/beam ! Combined flux in latest and established models = 1.34472 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 83 components and 1.34472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053656Jy sigma=0.631069 ! Fit after self-cal, rms=0.053653Jy sigma=0.631036 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053653Jy sigma=0.631036 ! Fit after self-cal, rms=0.053586Jy sigma=0.630878 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.213 mas, bmaj=2.901 mas, bpa=3.417 degrees ! Estimated noise=0.470481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000816976 Jy ! Component: 100 - total flux cleaned = 0.000794297 Jy ! Component: 150 - total flux cleaned = 0.000700432 Jy ! Component: 200 - total flux cleaned = 0.000667194 Jy ! Total flux subtracted in 200 components = 0.000667194 Jy ! Clean residual min=-0.001209 max=0.001377 Jy/beam ! Clean residual mean=-0.000001 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 1.34539 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 96 components and 1.34539 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053578Jy sigma=0.630788 ! Fit after self-cal, rms=0.053575Jy sigma=0.630753 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000191062 Jy ! Component: 100 - total flux cleaned = 0.000207916 Jy ! Component: 150 - total flux cleaned = 0.000237464 Jy ! Component: 200 - total flux cleaned = 0.000223628 Jy ! Total flux subtracted in 200 components = 0.000223628 Jy ! Clean residual min=-0.001173 max=0.001354 Jy/beam ! Clean residual mean=-0.000001 rms=0.000344 Jy/beam ! Combined flux in latest and established models = 1.34561 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 107 components and 1.34561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053574Jy sigma=0.630747 ! Fit after self-cal, rms=0.053573Jy sigma=0.630733 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9067 mas, bmaj=2.226 mas, bpa=0.2384 degrees ! Estimated noise=0.373765 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9067 x 2.226 at 0.2384 degrees (North through East) ! Clean map min=-0.001191 max=0.96509 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.053573Jy sigma=0.630733 ! Fit after self-cal, rms=0.050135Jy sigma=0.574134 ! Inverting map and beam ! Estimated beam: bmin=0.9066 mas, bmaj=2.226 mas, bpa=0.2268 degrees ! Estimated noise=0.373792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000149442 Jy ! Component: 100 - total flux cleaned = 7.86682e-05 Jy ! Component: 150 - total flux cleaned = 0.000105597 Jy ! Component: 200 - total flux cleaned = 0.000209356 Jy ! Total flux subtracted in 200 components = 0.000209356 Jy ! Clean residual min=-0.001341 max=0.001275 Jy/beam ! Clean residual mean=-0.000001 rms=0.000285 Jy/beam ! Combined flux in latest and established models = 1.34582 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 114 components and 1.34582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050089Jy sigma=0.573725 ! Fit after self-cal, rms=0.050086Jy sigma=0.573689 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000203063 Jy ! Component: 100 - total flux cleaned = 0.000227064 Jy ! Component: 150 - total flux cleaned = 0.000295941 Jy ! Component: 200 - total flux cleaned = 0.000340692 Jy ! Total flux subtracted in 200 components = 0.000340692 Jy ! Clean residual min=-0.001319 max=0.001254 Jy/beam ! Clean residual mean=-0.000000 rms=0.000281 Jy/beam ! Combined flux in latest and established models = 1.34617 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 120 components and 1.34617 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050060Jy sigma=0.573465 ! Fit after self-cal, rms=0.050059Jy sigma=0.573449 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.050059Jy sigma=0.573449 ! Fit after self-cal, rms=0.050019Jy sigma=0.573373 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6831 mas, bmaj=1.919 mas, bpa=0.2074 degrees ! Estimated noise=0.683041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.696663 Jy ! Component: 100 - total flux cleaned = 0.992804 Jy ! Component: 150 - total flux cleaned = 1.1447 Jy ! Component: 200 - total flux cleaned = 1.226 Jy ! Total flux subtracted in 200 components = 1.226 Jy ! Clean residual min=-0.011024 max=0.038967 Jy/beam ! Clean residual mean=-0.000032 rms=0.003122 Jy/beam ! Combined flux in latest and established models = 1.226 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 1.226 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9062 mas, bmaj=2.225 mas, bpa=0.199 degrees ! Estimated noise=0.373613 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0584037 Jy ! Component: 100 - total flux cleaned = 0.0839225 Jy ! Component: 150 - total flux cleaned = 0.0965816 Jy ! Component: 200 - total flux cleaned = 0.103773 Jy ! Total flux subtracted in 200 components = 0.103773 Jy ! Clean residual min=-0.001887 max=0.004251 Jy/beam ! Clean residual mean=-0.000003 rms=0.000538 Jy/beam ! Combined flux in latest and established models = 1.32977 Jy ! Adding 23 model components to the UV plane model. ! The established model now contains 26 components and 1.32977 Jy ! Inverting map ! Added new window around map position (-0.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00461166 Jy ! Component: 100 - total flux cleaned = 0.00761982 Jy ! Component: 150 - total flux cleaned = 0.00967287 Jy ! Component: 200 - total flux cleaned = 0.0107516 Jy ! Total flux subtracted in 200 components = 0.0107516 Jy ! Clean residual min=-0.001501 max=0.001768 Jy/beam ! Clean residual mean=-0.000001 rms=0.000330 Jy/beam ! Combined flux in latest and established models = 1.34053 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 1.34053 Jy ! Inverting map ! Added new window around map position (1.4, 2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00123378 Jy ! Component: 100 - total flux cleaned = 0.00197954 Jy ! Component: 150 - total flux cleaned = 0.0026072 Jy ! Component: 200 - total flux cleaned = 0.00318313 Jy ! Total flux subtracted in 200 components = 0.00318313 Jy ! Clean residual min=-0.001330 max=0.001314 Jy/beam ! Clean residual mean=-0.000000 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 1.34371 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 58 components and 1.34371 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.212 mas, bmaj=2.9 mas, bpa=3.382 degrees ! Estimated noise=0.470659 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0011463 Jy ! Component: 100 - total flux cleaned = 0.00176384 Jy ! Component: 150 - total flux cleaned = 0.0020368 Jy ! Component: 200 - total flux cleaned = 0.00218243 Jy ! Total flux subtracted in 200 components = 0.00218243 Jy ! Clean residual min=-0.001273 max=0.001250 Jy/beam ! Clean residual mean=-0.000001 rms=0.000341 Jy/beam ! Combined flux in latest and established models = 1.34589 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000111734 Jy ! Component: 100 - total flux cleaned = 0.000235989 Jy ! Component: 150 - total flux cleaned = 0.000350646 Jy ! Component: 200 - total flux cleaned = 0.000457826 Jy ! Total flux subtracted in 200 components = 0.000457826 Jy ! Clean residual min=-0.001191 max=0.001201 Jy/beam ! Clean residual mean=-0.000001 rms=0.000328 Jy/beam ! Combined flux in latest and established models = 1.34635 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 93 components and 1.34635 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9062 mas, bmaj=2.225 mas, bpa=0.199 degrees ! Estimated noise=0.373613 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000122008 Jy ! Component: 100 - total flux cleaned = -1.9643e-05 Jy ! Component: 150 - total flux cleaned = 4.47306e-05 Jy ! Component: 200 - total flux cleaned = 0.00013588 Jy ! Total flux subtracted in 200 components = 0.00013588 Jy ! Clean residual min=-0.001184 max=0.001228 Jy/beam ! Clean residual mean=-0.000000 rms=0.000267 Jy/beam ! Combined flux in latest and established models = 1.34649 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 114 components and 1.34649 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.049980Jy sigma=0.572969 ! Fit after self-cal, rms=0.049948Jy sigma=0.572780 wmodel J1850+2825_X_map.mod ! Writing 114 model components to file: J1850+2825_X_map.mod wobs J1850+2825_X_uvs.fits ! Writing UV FITS file: J1850+2825_X_uvs.fits wwins J1850+2825_X_map.win ! wwins: Wrote 5 windows to J1850+2825_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -4.04662e-05 Jy ! Component: 100 - total flux cleaned = -8.23692e-05 Jy ! Component: 150 - total flux cleaned = -6.39089e-05 Jy ! Component: 200 - total flux cleaned = 4.60445e-05 Jy ! Component: 250 - total flux cleaned = 6.39455e-05 Jy ! Component: 300 - total flux cleaned = 0.000133177 Jy ! Component: 350 - total flux cleaned = 0.000166582 Jy ! Component: 400 - total flux cleaned = 0.000215631 Jy ! Component: 450 - total flux cleaned = 0.000166999 Jy ! Component: 500 - total flux cleaned = 0.000151507 Jy ! Component: 550 - total flux cleaned = 0.000151785 Jy ! Component: 600 - total flux cleaned = 0.000166997 Jy ! Component: 650 - total flux cleaned = 0.000166976 Jy ! Component: 700 - total flux cleaned = 0.00016702 Jy ! Component: 750 - total flux cleaned = 0.000137858 Jy ! Component: 800 - total flux cleaned = 0.000195159 Jy ! Component: 850 - total flux cleaned = 0.000209365 Jy ! Component: 900 - total flux cleaned = 0.000237415 Jy ! Component: 950 - total flux cleaned = 0.000264822 Jy ! Component: 1000 - total flux cleaned = 0.000210025 Jy ! Component: 1050 - total flux cleaned = 0.000223798 Jy ! Component: 1100 - total flux cleaned = 0.000264113 Jy ! Component: 1150 - total flux cleaned = 0.000277213 Jy ! Component: 1200 - total flux cleaned = 0.000264157 Jy ! Component: 1250 - total flux cleaned = 0.000264144 Jy ! Component: 1300 - total flux cleaned = 0.000302446 Jy ! Component: 1350 - total flux cleaned = 0.00032772 Jy ! Component: 1400 - total flux cleaned = 0.000327609 Jy ! Component: 1450 - total flux cleaned = 0.000302723 Jy ! Component: 1500 - total flux cleaned = 0.000401062 Jy ! Component: 1550 - total flux cleaned = 0.000412977 Jy ! Component: 1600 - total flux cleaned = 0.000401062 Jy ! Component: 1650 - total flux cleaned = 0.000436817 Jy ! Component: 1700 - total flux cleaned = 0.000448714 Jy ! Component: 1750 - total flux cleaned = 0.000425089 Jy ! Component: 1800 - total flux cleaned = 0.000425225 Jy ! Component: 1850 - total flux cleaned = 0.000459921 Jy ! Component: 1900 - total flux cleaned = 0.000494388 Jy ! Component: 1950 - total flux cleaned = 0.000471751 Jy ! Component: 2000 - total flux cleaned = 0.000505536 Jy ! Component: 2050 - total flux cleaned = 0.000471904 Jy ! Component: 2100 - total flux cleaned = 0.00050525 Jy ! Component: 2150 - total flux cleaned = 0.000527118 Jy ! Component: 2200 - total flux cleaned = 0.00050529 Jy ! Component: 2250 - total flux cleaned = 0.000559401 Jy ! Component: 2300 - total flux cleaned = 0.00051633 Jy ! Component: 2350 - total flux cleaned = 0.000537895 Jy ! Component: 2400 - total flux cleaned = 0.000569606 Jy ! Component: 2450 - total flux cleaned = 0.000506423 Jy ! Component: 2500 - total flux cleaned = 0.00047516 Jy ! Component: 2550 - total flux cleaned = 0.00049591 Jy ! Component: 2600 - total flux cleaned = 0.000516519 Jy ! Component: 2650 - total flux cleaned = 0.000506163 Jy ! Component: 2700 - total flux cleaned = 0.0005061 Jy ! Component: 2750 - total flux cleaned = 0.000496112 Jy ! Component: 2800 - total flux cleaned = 0.000496178 Jy ! Component: 2850 - total flux cleaned = 0.000525904 Jy ! Component: 2900 - total flux cleaned = 0.000506057 Jy ! Component: 2950 - total flux cleaned = 0.000565062 Jy ! Component: 3000 - total flux cleaned = 0.000574825 Jy ! Component: 3050 - total flux cleaned = 0.000565062 Jy ! Component: 3100 - total flux cleaned = 0.000584338 Jy ! Component: 3150 - total flux cleaned = 0.000584384 Jy ! Component: 3200 - total flux cleaned = 0.000574855 Jy ! Component: 3250 - total flux cleaned = 0.000603308 Jy ! Component: 3300 - total flux cleaned = 0.000603357 Jy ! Component: 3350 - total flux cleaned = 0.000622175 Jy ! Component: 3400 - total flux cleaned = 0.000640791 Jy ! Component: 3450 - total flux cleaned = 0.000668578 Jy ! Component: 3500 - total flux cleaned = 0.00066855 Jy ! Component: 3550 - total flux cleaned = 0.000732761 Jy ! Component: 3600 - total flux cleaned = 0.000760153 Jy ! Component: 3650 - total flux cleaned = 0.000769087 Jy ! Component: 3700 - total flux cleaned = 0.000778138 Jy ! Component: 3750 - total flux cleaned = 0.00077807 Jy ! Component: 3800 - total flux cleaned = 0.000787 Jy ! Component: 3850 - total flux cleaned = 0.000795931 Jy ! Component: 3900 - total flux cleaned = 0.000813573 Jy ! Component: 3950 - total flux cleaned = 0.000813598 Jy ! Component: 4000 - total flux cleaned = 0.000813546 Jy ! Component: 4050 - total flux cleaned = 0.000796247 Jy ! Total flux subtracted in 4096 components = 0.000813529 Jy ! Clean residual min=-0.000517 max=0.000550 Jy/beam ! Clean residual mean=0.000000 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 1.3473 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 414 components and 1.3473 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1850+2825_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9062 x 2.225 at 0.199 degrees (North through East) ! Clean map min=-0.00090208 max=0.96503 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1850+2825_X_map.fits wmodel /vlbi/bp222/maps//J1850+2825_X_map.mod ! Writing 414 model components to file: /vlbi/bp222/maps//J1850+2825_X_map.mod wobs /vlbi/bp222/maps//J1850+2825_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1850+2825_X_uvs.fits wwins /vlbi/bp222/maps//J1850+2825_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/maps//J1850+2825_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.96503 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146033 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0453974 0.0453974 0.0907949 0.18159 0.36318 0.726359 1.45272 2.90544 5.81087 11.6217 23.2435 46.487 92.974 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.965 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 6608.3 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1850+2825_X_dfm.log closed on Thu Sep 27 11:30:57 2018