! Started logfile: /vlbi/bp222/maps//J1729+7935_S_dfm.log on Thu Sep 27 11:27:04 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/bp222/maps//J1729+7935_S_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J1729+7935_S_uva.fits
! AN table 1: 23 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.952899 visibilities/baseline/integration-bin.
! Found source: J1729+7935
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 49 lines of history.
! 
! Reading 3156 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1729+7935_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 120 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002658Jy  sigma=14.344612
! Fit after  self-cal, rms=0.883058Jy  sigma=12.604084
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.261 mas, bmaj=9.793 mas, bpa=17.28 degrees
! Estimated noise=1.30879 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0900682 Jy
! Component: 100  -  total flux cleaned = 0.109709 Jy
! Total flux subtracted in 100 components = 0.109709 Jy
! Clean residual min=-0.004063 max=0.007258 Jy/beam
! Clean residual mean=-0.000022 rms=0.001239 Jy/beam
! Combined flux in latest and established models = 0.109709 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.109709 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.058868Jy  sigma=0.768445
! Fit after  self-cal, rms=0.058864Jy  sigma=0.768384
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.809 mas, bmaj=9.693 mas, bpa=16.34 degrees
! Estimated noise=1.03727 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (14, -62).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00887641 Jy
! Component: 100  -  total flux cleaned = 0.0137896 Jy
! Component: 150  -  total flux cleaned = 0.0169634 Jy
! Component: 200  -  total flux cleaned = 0.018645 Jy
! Total flux subtracted in 200 components = 0.018645 Jy
! Clean residual min=-0.003349 max=0.003342 Jy/beam
! Clean residual mean=-0.000004 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.128354 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 56 components and 0.128354 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057219Jy  sigma=0.749389
! Fit after  self-cal, rms=0.057175Jy  sigma=0.748812
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.809 x 9.693 at 16.34 degrees (North through East)
! Clean map  min=-0.0030903  max=0.11244 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.01     HN        1.05     KP        0.97     
!   LA        0.96     MK        0.94     NL        0.77     PT        0.99     
!   SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.02     HN        0.98     KP        1.00     
!   LA        0.94     MK        1.03     NL        1.02     PT        1.02     
!   SC        1.04     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        1.00     KP        0.99     
!   LA        0.91     MK        1.00     NL        1.02     PT        1.06     
!   SC        0.98     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.97     HN        1.04     KP        1.00*    
!   LA        0.89     MK        1.00*    NL        1.00*    PT        1.00     
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.057175Jy  sigma=0.748812
! Fit after  self-cal, rms=0.055123Jy  sigma=0.738648
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.816 mas, bmaj=9.761 mas, bpa=16.36 degrees
! Estimated noise=1.02848 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00038962 Jy
! Component: 100  -  total flux cleaned = 0.000485097 Jy
! Component: 150  -  total flux cleaned = 0.000542137 Jy
! Component: 200  -  total flux cleaned = 0.000620763 Jy
! Total flux subtracted in 200 components = 0.000620763 Jy
! Clean residual min=-0.003111 max=0.002918 Jy/beam
! Clean residual mean=0.000004 rms=0.000691 Jy/beam
! Combined flux in latest and established models = 0.128975 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 79 components and 0.128975 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055089Jy  sigma=0.738163
! Fit after  self-cal, rms=0.055080Jy  sigma=0.738041
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055080Jy  sigma=0.738041
! Fit after  self-cal, rms=0.055094Jy  sigma=0.738012
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.817 mas, bmaj=9.759 mas, bpa=16.36 degrees
! Estimated noise=1.0281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000176023 Jy
! Component: 100  -  total flux cleaned = 0.000224374 Jy
! Component: 150  -  total flux cleaned = 0.000269749 Jy
! Component: 200  -  total flux cleaned = 0.00033255 Jy
! Total flux subtracted in 200 components = 0.00033255 Jy
! Clean residual min=-0.002981 max=0.002910 Jy/beam
! Clean residual mean=0.000005 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.129307 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 87 components and 0.129307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055076Jy  sigma=0.737739
! Fit after  self-cal, rms=0.055076Jy  sigma=0.737726
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000119277 Jy
! Component: 100  -  total flux cleaned = 0.000138754 Jy
! Component: 150  -  total flux cleaned = 0.000156772 Jy
! Component: 200  -  total flux cleaned = 0.000209024 Jy
! Total flux subtracted in 200 components = 0.000209024 Jy
! Clean residual min=-0.002897 max=0.002931 Jy/beam
! Clean residual mean=0.000005 rms=0.000667 Jy/beam
! Combined flux in latest and established models = 0.129516 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 101 components and 0.129517 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055067Jy  sigma=0.737532
! Fit after  self-cal, rms=0.055067Jy  sigma=0.737526
! Inverting map 
! Added new window around map position (-38.5, -36.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0025599 Jy
! Component: 100  -  total flux cleaned = 0.00380505 Jy
! Component: 150  -  total flux cleaned = 0.00436481 Jy
! Component: 200  -  total flux cleaned = 0.00456777 Jy
! Total flux subtracted in 200 components = 0.00456777 Jy
! Clean residual min=-0.002292 max=0.002141 Jy/beam
! Clean residual mean=-0.000003 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.134084 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 135 components and 0.134084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054960Jy  sigma=0.735440
! Fit after  self-cal, rms=0.054953Jy  sigma=0.735354
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054953Jy  sigma=0.735354
! Fit after  self-cal, rms=0.054789Jy  sigma=0.735253
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.813 mas, bmaj=9.761 mas, bpa=16.39 degrees
! Estimated noise=1.02503 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000827607 Jy
! Component: 100  -  total flux cleaned = 0.0010308 Jy
! Component: 150  -  total flux cleaned = 0.00118902 Jy
! Component: 200  -  total flux cleaned = 0.00135451 Jy
! Total flux subtracted in 200 components = 0.00135451 Jy
! Clean residual min=-0.002227 max=0.002059 Jy/beam
! Clean residual mean=-0.000003 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.135439 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 149 components and 0.135439 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054770Jy  sigma=0.734900
! Fit after  self-cal, rms=0.054771Jy  sigma=0.734890
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000220586 Jy
! Component: 100  -  total flux cleaned = 0.000257305 Jy
! Component: 150  -  total flux cleaned = 0.000293803 Jy
! Component: 200  -  total flux cleaned = 0.000311531 Jy
! Total flux subtracted in 200 components = 0.000311531 Jy
! Clean residual min=-0.002214 max=0.002057 Jy/beam
! Clean residual mean=-0.000003 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.13575 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 170 components and 0.13575 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054759Jy  sigma=0.734726
! Fit after  self-cal, rms=0.054759Jy  sigma=0.734723
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054759Jy  sigma=0.734723
! Fit after  self-cal, rms=0.054754Jy  sigma=0.734702
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.777 mas, bmaj=11.18 mas, bpa=9.767 degrees
! Estimated noise=1.4115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000446278 Jy
! Component: 100  -  total flux cleaned = 0.000700748 Jy
! Component: 150  -  total flux cleaned = 0.000787565 Jy
! Component: 200  -  total flux cleaned = 0.000806543 Jy
! Total flux subtracted in 200 components = 0.000806543 Jy
! Clean residual min=-0.002430 max=0.002235 Jy/beam
! Clean residual mean=-0.000009 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.136557 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 186 components and 0.136557 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054744Jy  sigma=0.734650
! Fit after  self-cal, rms=0.054741Jy  sigma=0.734625
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000137473 Jy
! Component: 100  -  total flux cleaned = 0.000157615 Jy
! Component: 150  -  total flux cleaned = 0.000195091 Jy
! Component: 200  -  total flux cleaned = 0.000212315 Jy
! Total flux subtracted in 200 components = 0.000212315 Jy
! Clean residual min=-0.002342 max=0.002193 Jy/beam
! Clean residual mean=-0.000009 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.136769 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 197 components and 0.136769 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054735Jy  sigma=0.734586
! Fit after  self-cal, rms=0.054734Jy  sigma=0.734578
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.811 mas, bmaj=9.759 mas, bpa=16.39 degrees
! Estimated noise=1.02478 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.811 x 9.759 at 16.39 degrees (North through East)
! Clean map  min=-0.0020408  max=0.11121 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.256 mas, bmaj=9.864 mas, bpa=17.38 degrees
! Estimated noise=1.29342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0889248 Jy
! Component: 100  -  total flux cleaned = 0.108489 Jy
! Component: 150  -  total flux cleaned = 0.115071 Jy
! Component: 200  -  total flux cleaned = 0.119065 Jy
! Total flux subtracted in 200 components = 0.119065 Jy
! Clean residual min=-0.003770 max=0.003092 Jy/beam
! Clean residual mean=-0.000010 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.119065 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.119065 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.811 mas, bmaj=9.759 mas, bpa=16.39 degrees
! Estimated noise=1.02478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0036631 Jy
! Component: 100  -  total flux cleaned = 0.00622485 Jy
! Component: 150  -  total flux cleaned = 0.00822664 Jy
! Component: 200  -  total flux cleaned = 0.00986657 Jy
! Total flux subtracted in 200 components = 0.00986657 Jy
! Clean residual min=-0.002892 max=0.002088 Jy/beam
! Clean residual mean=-0.000010 rms=0.000647 Jy/beam
! Combined flux in latest and established models = 0.128931 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 50 components and 0.128931 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.777 mas, bmaj=11.18 mas, bpa=9.767 degrees
! Estimated noise=1.4115 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00233842 Jy
! Component: 100  -  total flux cleaned = 0.00397783 Jy
! Component: 150  -  total flux cleaned = 0.00475966 Jy
! Component: 200  -  total flux cleaned = 0.00537614 Jy
! Total flux subtracted in 200 components = 0.00537614 Jy
! Clean residual min=-0.003122 max=0.002184 Jy/beam
! Clean residual mean=-0.000015 rms=0.000788 Jy/beam
! Combined flux in latest and established models = 0.134307 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0004971 Jy
! Component: 100  -  total flux cleaned = 0.000966932 Jy
! Component: 150  -  total flux cleaned = 0.00129322 Jy
! Component: 200  -  total flux cleaned = 0.00153175 Jy
! Total flux subtracted in 200 components = 0.00153175 Jy
! Clean residual min=-0.002776 max=0.002293 Jy/beam
! Clean residual mean=-0.000012 rms=0.000718 Jy/beam
! Combined flux in latest and established models = 0.135839 Jy
! Adding 78 model components to the UV plane model.
! The established model now contains 125 components and 0.135839 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.811 mas, bmaj=9.759 mas, bpa=16.39 degrees
! Estimated noise=1.02478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.2548e-05 Jy
! Component: 100  -  total flux cleaned = 5.1011e-05 Jy
! Component: 150  -  total flux cleaned = 8.40322e-05 Jy
! Component: 200  -  total flux cleaned = 0.000168403 Jy
! Total flux subtracted in 200 components = 0.000168403 Jy
! Clean residual min=-0.002249 max=0.001982 Jy/beam
! Clean residual mean=-0.000005 rms=0.000517 Jy/beam
! Combined flux in latest and established models = 0.136008 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 155 components and 0.136008 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054758Jy  sigma=0.735119
! Fit after  self-cal, rms=0.054758Jy  sigma=0.735057
wmodel J1729+7935_S_map.mod
! Writing 155 model components to file: J1729+7935_S_map.mod
wobs   J1729+7935_S_uvs.fits
! Writing UV FITS file: J1729+7935_S_uvs.fits
wwins  J1729+7935_S_map.win
! wwins: Wrote 3 windows to J1729+7935_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000533768 Jy
! Component: 100  -  total flux cleaned = -0.000533619 Jy
! Component: 150  -  total flux cleaned = -0.000401914 Jy
! Component: 200  -  total flux cleaned = -0.00027736 Jy
! Component: 250  -  total flux cleaned = -0.000218255 Jy
! Component: 300  -  total flux cleaned = -0.000162028 Jy
! Component: 350  -  total flux cleaned = -0.000160878 Jy
! Component: 400  -  total flux cleaned = -0.000210316 Jy
! Component: 450  -  total flux cleaned = -0.000282787 Jy
! Component: 500  -  total flux cleaned = -0.000446348 Jy
! Component: 550  -  total flux cleaned = -0.000626155 Jy
! Component: 600  -  total flux cleaned = -0.000712962 Jy
! Component: 650  -  total flux cleaned = -0.000796936 Jy
! Component: 700  -  total flux cleaned = -0.000838015 Jy
! Component: 750  -  total flux cleaned = -0.000957131 Jy
! Component: 800  -  total flux cleaned = -0.00101521 Jy
! Component: 850  -  total flux cleaned = -0.00112807 Jy
! Component: 900  -  total flux cleaned = -0.00123808 Jy
! Component: 950  -  total flux cleaned = -0.00129179 Jy
! Component: 1000  -  total flux cleaned = -0.00137972 Jy
! Component: 1050  -  total flux cleaned = -0.00148292 Jy
! Component: 1100  -  total flux cleaned = -0.00155 Jy
! Component: 1150  -  total flux cleaned = -0.00159961 Jy
! Component: 1200  -  total flux cleaned = -0.00169653 Jy
! Component: 1250  -  total flux cleaned = -0.00171279 Jy
! Component: 1300  -  total flux cleaned = -0.00177526 Jy
! Component: 1350  -  total flux cleaned = -0.00180609 Jy
! Component: 1400  -  total flux cleaned = -0.00185122 Jy
! Component: 1450  -  total flux cleaned = -0.00185102 Jy
! Component: 1500  -  total flux cleaned = -0.00190964 Jy
! Component: 1550  -  total flux cleaned = -0.0019097 Jy
! Component: 1600  -  total flux cleaned = -0.0019523 Jy
! Component: 1650  -  total flux cleaned = -0.00196631 Jy
! Component: 1700  -  total flux cleaned = -0.00200768 Jy
! Component: 1750  -  total flux cleaned = -0.00199393 Jy
! Component: 1800  -  total flux cleaned = -0.00204759 Jy
! Component: 1850  -  total flux cleaned = -0.00203411 Jy
! Component: 1900  -  total flux cleaned = -0.00206055 Jy
! Component: 1950  -  total flux cleaned = -0.0020997 Jy
! Component: 2000  -  total flux cleaned = -0.00211264 Jy
! Component: 2050  -  total flux cleaned = -0.00210016 Jy
! Component: 2100  -  total flux cleaned = -0.00210036 Jy
! Component: 2150  -  total flux cleaned = -0.00210037 Jy
! Component: 2200  -  total flux cleaned = -0.00205088 Jy
! Component: 2250  -  total flux cleaned = -0.00207556 Jy
! Component: 2300  -  total flux cleaned = -0.00209996 Jy
! Component: 2350  -  total flux cleaned = -0.00208784 Jy
! Component: 2400  -  total flux cleaned = -0.00207583 Jy
! Component: 2450  -  total flux cleaned = -0.00209971 Jy
! Component: 2500  -  total flux cleaned = -0.00211149 Jy
! Component: 2550  -  total flux cleaned = -0.00207605 Jy
! Component: 2600  -  total flux cleaned = -0.00208774 Jy
! Component: 2650  -  total flux cleaned = -0.00204119 Jy
! Component: 2700  -  total flux cleaned = -0.00202961 Jy
! Component: 2750  -  total flux cleaned = -0.00202962 Jy
! Component: 2800  -  total flux cleaned = -0.00199522 Jy
! Component: 2850  -  total flux cleaned = -0.00199524 Jy
! Component: 2900  -  total flux cleaned = -0.00197258 Jy
! Component: 2950  -  total flux cleaned = -0.00197259 Jy
! Component: 3000  -  total flux cleaned = -0.0019501 Jy
! Component: 3050  -  total flux cleaned = -0.00198364 Jy
! Component: 3100  -  total flux cleaned = -0.00199479 Jy
! Component: 3150  -  total flux cleaned = -0.00200588 Jy
! Component: 3200  -  total flux cleaned = -0.0020059 Jy
! Component: 3250  -  total flux cleaned = -0.00203905 Jy
! Component: 3300  -  total flux cleaned = -0.00202802 Jy
! Component: 3350  -  total flux cleaned = -0.00203912 Jy
! Component: 3400  -  total flux cleaned = -0.00207202 Jy
! Component: 3450  -  total flux cleaned = -0.00209386 Jy
! Component: 3500  -  total flux cleaned = -0.00208293 Jy
! Component: 3550  -  total flux cleaned = -0.00208293 Jy
! Component: 3600  -  total flux cleaned = -0.00211548 Jy
! Component: 3650  -  total flux cleaned = -0.00211543 Jy
! Component: 3700  -  total flux cleaned = -0.00210456 Jy
! Component: 3750  -  total flux cleaned = -0.00208293 Jy
! Component: 3800  -  total flux cleaned = -0.00207219 Jy
! Component: 3850  -  total flux cleaned = -0.00208302 Jy
! Component: 3900  -  total flux cleaned = -0.00205079 Jy
! Component: 3950  -  total flux cleaned = -0.00207222 Jy
! Component: 4000  -  total flux cleaned = -0.0020293 Jy
! Component: 4050  -  total flux cleaned = -0.00204003 Jy
! Total flux subtracted in 4096 components = -0.00204 Jy
! Clean residual min=-0.000601 max=0.000656 Jy/beam
! Clean residual mean=0.000001 rms=0.000188 Jy/beam
! Combined flux in latest and established models = 0.133968 Jy
keep
! Adding 226 model components to the UV plane model.
! The established model now contains 380 components and 0.133967 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J1729+7935_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.811 x 9.759 at 16.39 degrees (North through East)
! Clean map  min=-0.0012955  max=0.11054 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J1729+7935_S_map.fits
wmodel /vlbi/bp222/maps//J1729+7935_S_map.mod
! Writing 380 model components to file: /vlbi/bp222/maps//J1729+7935_S_map.mod
wobs   /vlbi/bp222/maps//J1729+7935_S_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J1729+7935_S_uvs.fits
wwins  /vlbi/bp222/maps//J1729+7935_S_map.win
! wwins: Wrote 4 windows to /vlbi/bp222/maps//J1729+7935_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.110545 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000180296 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.489294 0.489294 0.978588 1.95718 3.91435 7.8287 15.6574 31.3148 62.6296
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.11 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  613.128 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J1729+7935_S_dfm.log closed on Thu Sep 27 11:27:08 2018