! Started logfile: /vlbi/bp222/maps//J1352-2745_X_dfm.log on Thu Sep 27 11:12:25 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.42800
obs     /vlbi/bp222/maps//J1352-2745_X_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J1352-2745_X_uva.fits
! AN table 1: 69 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.979871 visibilities/baseline/integration-bin.
! Found source: J1352-2745
! 
! There are 12 IFs, and a total of 12 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    8.428e+09      3.2e+07          1      3.2e+07
!  02        2     8.46e+09      3.2e+07          1      3.2e+07
!  03        3    8.492e+09      3.2e+07          1      3.2e+07
!  04        4    8.524e+09      3.2e+07          1      3.2e+07
!  05        5    8.588e+09      3.2e+07          1      3.2e+07
!  06        6     8.62e+09      3.2e+07          1      3.2e+07
!  07        7    8.684e+09      3.2e+07          1      3.2e+07
!  08        8    8.716e+09      3.2e+07          1      3.2e+07
!  09        9     8.78e+09      3.2e+07          1      3.2e+07
!  10       10    8.812e+09      3.2e+07          1      3.2e+07
!  11       11    8.844e+09      3.2e+07          1      3.2e+07
!  12       12    8.876e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 121 lines of history.
! 
! Reading 29208 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 12 channels.
! Selecting polarization: RR,  channels: 1..12
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
! Reading IF 9 channels: 9..9
! Reading IF 10 channels: 10..10
! Reading IF 11 channels: 11..11
! Reading IF 12 channels: 12..12
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1352-2745_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 9.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 10.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 11.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 12.
!  A total of 6 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.008318Jy  sigma=12.595276
! Fit after  self-cal, rms=0.868652Jy  sigma=10.736828
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6076 mas, bmaj=1.596 mas, bpa=-6.34 degrees
! Estimated noise=0.68026 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.103492 Jy
! Component: 100  -  total flux cleaned = 0.126089 Jy
! Total flux subtracted in 100 components = 0.126089 Jy
! Clean residual min=-0.004463 max=0.008720 Jy/beam
! Clean residual mean=0.000004 rms=0.001065 Jy/beam
! Combined flux in latest and established models = 0.12609 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.12609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085783Jy  sigma=0.918801
! Fit after  self-cal, rms=0.085758Jy  sigma=0.918614
! Inverting map 
! Added new window around map position (1.6, 0.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00862861 Jy
! Component: 100  -  total flux cleaned = 0.0140935 Jy
! Total flux subtracted in 100 components = 0.0140935 Jy
! Clean residual min=-0.003998 max=0.007563 Jy/beam
! Clean residual mean=0.000002 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.140183 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 21 components and 0.140183 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.084541Jy  sigma=0.894814
! Fit after  self-cal, rms=0.084519Jy  sigma=0.893798
! Inverting map 
! Added new window around map position (-1.6, -0.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00613937 Jy
! Component: 100  -  total flux cleaned = 0.0100468 Jy
! Total flux subtracted in 100 components = 0.0100468 Jy
! Clean residual min=-0.003609 max=0.004103 Jy/beam
! Clean residual mean=0.000000 rms=0.000804 Jy/beam
! Combined flux in latest and established models = 0.15023 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.15023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083867Jy  sigma=0.883004
! Fit after  self-cal, rms=0.083871Jy  sigma=0.882900
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8084 mas, bmaj=1.976 mas, bpa=-4.786 degrees
! Estimated noise=0.349756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00616753 Jy
! Component: 100  -  total flux cleaned = 0.0102551 Jy
! Component: 150  -  total flux cleaned = 0.0132186 Jy
! Component: 200  -  total flux cleaned = 0.015421 Jy
! Total flux subtracted in 200 components = 0.015421 Jy
! Clean residual min=-0.002963 max=0.003873 Jy/beam
! Clean residual mean=-0.000004 rms=0.000669 Jy/beam
! Combined flux in latest and established models = 0.165651 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 61 components and 0.165651 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.083343Jy  sigma=0.874449
! Fit after  self-cal, rms=0.083314Jy  sigma=0.873884
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8084 x 1.976 at -4.786 degrees (North through East)
! Clean map  min=-0.0027584  max=0.13211 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.96     HN        1.15     KP        0.97     
!   LA        1.01     MK        1.01     NL        1.02     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.05     KP        0.98     
!   LA        1.00     MK        1.01     NL        1.03     PT        0.97     
!   SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.07     KP        1.00     
!   LA        0.99     MK        1.02     NL        1.00     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.07     KP        1.00     
!   LA        1.00     MK        1.04     NL        1.01     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.10     KP        0.99     
!   LA        0.99     MK        1.02     NL        1.01     PT        0.96     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.98     HN        1.00     KP        1.02     
!   LA        0.99     MK        1.05     NL        1.03     PT        0.95     
!   SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        1.00     HN        1.10     KP        1.00     
!   LA        0.98     MK        1.01     NL        1.03     PT        0.96     
!   SC        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.97     HN        1.08     KP        0.99     
!   LA        1.00     MK        1.02     NL        1.02     PT        0.97     
!   SC        1.00     
! 
! 
! Correcting IF 9.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.96     HN        1.10     KP        1.00     
!   LA        0.98     MK        1.03     NL        1.04     PT        0.98     
!   SC        1.00     
! 
! 
! Correcting IF 10.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.97     HN        1.10     KP        0.98     
!   LA        1.01     MK        1.06     NL        1.03     PT        0.94     
!   SC        1.00     
! 
! 
! Correcting IF 11.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.99     HN        1.08     KP        1.01     
!   LA        1.00     MK        1.03     NL        1.00     PT        0.96     
!   SC        0.99     
! 
! 
! Correcting IF 12.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        0.99     HN        1.03     KP        1.00     
!   LA        0.99     MK        0.99     NL        1.01     PT        0.93     
!   SC        1.03     
! 
! 
! Fit before self-cal, rms=0.083314Jy  sigma=0.873884
! Fit after  self-cal, rms=0.085321Jy  sigma=0.870748
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8167 mas, bmaj=1.984 mas, bpa=-4.425 degrees
! Estimated noise=0.349599 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00124055 Jy
! Component: 100  -  total flux cleaned = -0.00164173 Jy
! Component: 150  -  total flux cleaned = -0.00194409 Jy
! Component: 200  -  total flux cleaned = -0.00207945 Jy
! Total flux subtracted in 200 components = -0.00207945 Jy
! Clean residual min=-0.002462 max=0.002020 Jy/beam
! Clean residual mean=-0.000002 rms=0.000544 Jy/beam
! Combined flux in latest and established models = 0.163571 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.163571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085249Jy  sigma=0.869869
! Fit after  self-cal, rms=0.085287Jy  sigma=0.869792
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.085287Jy  sigma=0.869792
! Fit after  self-cal, rms=0.088940Jy  sigma=0.865347
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8178 mas, bmaj=1.988 mas, bpa=-4.546 degrees
! Estimated noise=0.350717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150538 Jy
! Component: 100  -  total flux cleaned = -0.00189324 Jy
! Component: 150  -  total flux cleaned = -0.00197967 Jy
! Component: 200  -  total flux cleaned = -0.00205501 Jy
! Total flux subtracted in 200 components = -0.00205501 Jy
! Clean residual min=-0.002128 max=0.001650 Jy/beam
! Clean residual mean=-0.000001 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.161516 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 97 components and 0.161516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088909Jy  sigma=0.864890
! Fit after  self-cal, rms=0.088968Jy  sigma=0.864826
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.15208e-05 Jy
! Component: 100  -  total flux cleaned = -0.000126639 Jy
! Component: 150  -  total flux cleaned = -0.000146946 Jy
! Component: 200  -  total flux cleaned = -0.000185985 Jy
! Total flux subtracted in 200 components = -0.000185985 Jy
! Clean residual min=-0.002057 max=0.001644 Jy/beam
! Clean residual mean=-0.000001 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.16133 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 105 components and 0.16133 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088959Jy  sigma=0.864673
! Fit after  self-cal, rms=0.088959Jy  sigma=0.864661
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.088959Jy  sigma=0.864661
! Fit after  self-cal, rms=0.091737Jy  sigma=0.862493
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.818 mas, bmaj=1.99 mas, bpa=-4.422 degrees
! Estimated noise=0.351066 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00118282 Jy
! Component: 100  -  total flux cleaned = -0.00153594 Jy
! Component: 150  -  total flux cleaned = -0.0016051 Jy
! Component: 200  -  total flux cleaned = -0.00162473 Jy
! Total flux subtracted in 200 components = -0.00162473 Jy
! Clean residual min=-0.001765 max=0.001497 Jy/beam
! Clean residual mean=-0.000000 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.159706 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 0.159706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091714Jy  sigma=0.862250
! Fit after  self-cal, rms=0.091752Jy  sigma=0.862208
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.85283e-05 Jy
! Component: 100  -  total flux cleaned = -4.06544e-05 Jy
! Component: 150  -  total flux cleaned = -2.35929e-05 Jy
! Component: 200  -  total flux cleaned = -8.20394e-06 Jy
! Total flux subtracted in 200 components = -8.20394e-06 Jy
! Clean residual min=-0.001723 max=0.001481 Jy/beam
! Clean residual mean=-0.000000 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.159697 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 122 components and 0.159697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091744Jy  sigma=0.862131
! Fit after  self-cal, rms=0.091746Jy  sigma=0.862125
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.091746Jy  sigma=0.862125
! Fit after  self-cal, rms=0.092354Jy  sigma=0.862025
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=5.156 mas, bpa=2.512 degrees
! Estimated noise=0.433248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000623519 Jy
! Component: 100  -  total flux cleaned = -0.000661036 Jy
! Component: 150  -  total flux cleaned = -0.000692015 Jy
! Component: 200  -  total flux cleaned = -0.000705102 Jy
! Total flux subtracted in 200 components = -0.000705102 Jy
! Clean residual min=-0.001885 max=0.001428 Jy/beam
! Clean residual mean=0.000000 rms=0.000419 Jy/beam
! Combined flux in latest and established models = 0.158992 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 127 components and 0.158992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092346Jy  sigma=0.861929
! Fit after  self-cal, rms=0.092360Jy  sigma=0.861915
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.2936e-05 Jy
! Component: 100  -  total flux cleaned = -5.11976e-05 Jy
! Component: 150  -  total flux cleaned = -6.12058e-05 Jy
! Component: 200  -  total flux cleaned = -7.02639e-05 Jy
! Total flux subtracted in 200 components = -7.02639e-05 Jy
! Clean residual min=-0.001821 max=0.001454 Jy/beam
! Clean residual mean=0.000000 rms=0.000416 Jy/beam
! Combined flux in latest and established models = 0.158922 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 134 components and 0.158922 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092360Jy  sigma=0.861889
! Fit after  self-cal, rms=0.092361Jy  sigma=0.861886
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8183 mas, bmaj=1.99 mas, bpa=-4.339 degrees
! Estimated noise=0.351005 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8183 x 1.99 at -4.339 degrees (North through East)
! Clean map  min=-0.0015183  max=0.1327 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6127 mas, bmaj=1.599 mas, bpa=-5.874 degrees
! Estimated noise=0.691978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.105138 Jy
! Component: 100  -  total flux cleaned = 0.12821 Jy
! Component: 150  -  total flux cleaned = 0.136021 Jy
! Component: 200  -  total flux cleaned = 0.141037 Jy
! Total flux subtracted in 200 components = 0.141037 Jy
! Clean residual min=-0.002583 max=0.003267 Jy/beam
! Clean residual mean=0.000002 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.141037 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.141037 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8183 mas, bmaj=1.99 mas, bpa=-4.339 degrees
! Estimated noise=0.351005 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00584496 Jy
! Component: 100  -  total flux cleaned = 0.00948067 Jy
! Component: 150  -  total flux cleaned = 0.0119672 Jy
! Component: 200  -  total flux cleaned = 0.0137126 Jy
! Total flux subtracted in 200 components = 0.0137126 Jy
! Clean residual min=-0.001686 max=0.001352 Jy/beam
! Clean residual mean=-0.000001 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.154749 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 48 components and 0.154749 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.252 mas, bmaj=5.156 mas, bpa=2.512 degrees
! Estimated noise=0.433248 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00202387 Jy
! Component: 100  -  total flux cleaned = 0.00311096 Jy
! Component: 150  -  total flux cleaned = 0.00354448 Jy
! Component: 200  -  total flux cleaned = 0.00370397 Jy
! Total flux subtracted in 200 components = 0.00370397 Jy
! Clean residual min=-0.001836 max=0.001550 Jy/beam
! Clean residual mean=-0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.158453 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000100325 Jy
! Component: 100  -  total flux cleaned = 0.000200806 Jy
! Component: 150  -  total flux cleaned = 0.000274181 Jy
! Component: 200  -  total flux cleaned = 0.000317675 Jy
! Total flux subtracted in 200 components = 0.000317675 Jy
! Clean residual min=-0.001758 max=0.001500 Jy/beam
! Clean residual mean=-0.000000 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.158771 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 72 components and 0.158771 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8183 mas, bmaj=1.99 mas, bpa=-4.339 degrees
! Estimated noise=0.351005 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -7.77991e-05 Jy
! Component: 100  -  total flux cleaned = -0.000174649 Jy
! Component: 150  -  total flux cleaned = -0.000238214 Jy
! Component: 200  -  total flux cleaned = -0.000257724 Jy
! Total flux subtracted in 200 components = -0.000257724 Jy
! Clean residual min=-0.001427 max=0.001307 Jy/beam
! Clean residual mean=-0.000000 rms=0.000331 Jy/beam
! Combined flux in latest and established models = 0.158513 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 80 components and 0.158513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Correcting IF 9.
! 
! Correcting IF 10.
! 
! Correcting IF 11.
! 
! Correcting IF 12.
! 
! Fit before self-cal, rms=0.092405Jy  sigma=0.861897
! Fit after  self-cal, rms=0.092380Jy  sigma=0.861851
wmodel J1352-2745_X_map.mod
! Writing 80 model components to file: J1352-2745_X_map.mod
wobs   J1352-2745_X_uvs.fits
! Writing UV FITS file: J1352-2745_X_uvs.fits
wwins  J1352-2745_X_map.win
! wwins: Wrote 4 windows to J1352-2745_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00059491 Jy
! Component: 100  -  total flux cleaned = -0.000715278 Jy
! Component: 150  -  total flux cleaned = -0.000738341 Jy
! Component: 200  -  total flux cleaned = -0.000738201 Jy
! Component: 250  -  total flux cleaned = -0.000760127 Jy
! Component: 300  -  total flux cleaned = -0.000844626 Jy
! Component: 350  -  total flux cleaned = -0.000885831 Jy
! Component: 400  -  total flux cleaned = -0.000966875 Jy
! Component: 450  -  total flux cleaned = -0.00106577 Jy
! Component: 500  -  total flux cleaned = -0.00114312 Jy
! Component: 550  -  total flux cleaned = -0.00118091 Jy
! Component: 600  -  total flux cleaned = -0.00116227 Jy
! Component: 650  -  total flux cleaned = -0.00114399 Jy
! Component: 700  -  total flux cleaned = -0.00110772 Jy
! Component: 750  -  total flux cleaned = -0.00107201 Jy
! Component: 800  -  total flux cleaned = -0.00105455 Jy
! Component: 850  -  total flux cleaned = -0.000950383 Jy
! Component: 900  -  total flux cleaned = -0.000899306 Jy
! Component: 950  -  total flux cleaned = -0.000865344 Jy
! Component: 1000  -  total flux cleaned = -0.000781632 Jy
! Component: 1050  -  total flux cleaned = -0.000715381 Jy
! Component: 1100  -  total flux cleaned = -0.000699143 Jy
! Component: 1150  -  total flux cleaned = -0.000699008 Jy
! Component: 1200  -  total flux cleaned = -0.000650951 Jy
! Component: 1250  -  total flux cleaned = -0.000587687 Jy
! Component: 1300  -  total flux cleaned = -0.000587714 Jy
! Component: 1350  -  total flux cleaned = -0.000541176 Jy
! Component: 1400  -  total flux cleaned = -0.000494956 Jy
! Component: 1450  -  total flux cleaned = -0.000418933 Jy
! Component: 1500  -  total flux cleaned = -0.000343714 Jy
! Component: 1550  -  total flux cleaned = -0.00032899 Jy
! Component: 1600  -  total flux cleaned = -0.000314004 Jy
! Component: 1650  -  total flux cleaned = -0.000226207 Jy
! Component: 1700  -  total flux cleaned = -0.000240893 Jy
! Component: 1750  -  total flux cleaned = -0.000211984 Jy
! Component: 1800  -  total flux cleaned = -0.000240536 Jy
! Component: 1850  -  total flux cleaned = -0.000183527 Jy
! Component: 1900  -  total flux cleaned = -0.000155217 Jy
! Component: 1950  -  total flux cleaned = -9.94604e-05 Jy
! Component: 2000  -  total flux cleaned = -1.63853e-05 Jy
! Component: 2050  -  total flux cleaned = 3.8611e-05 Jy
! Component: 2100  -  total flux cleaned = 6.59449e-05 Jy
! Component: 2150  -  total flux cleaned = 0.00010667 Jy
! Component: 2200  -  total flux cleaned = 0.000133652 Jy
! Component: 2250  -  total flux cleaned = 0.000147186 Jy
! Component: 2300  -  total flux cleaned = 0.000187041 Jy
! Component: 2350  -  total flux cleaned = 0.000200443 Jy
! Component: 2400  -  total flux cleaned = 0.00018741 Jy
! Component: 2450  -  total flux cleaned = 0.000278928 Jy
! Component: 2500  -  total flux cleaned = 0.000304832 Jy
! Component: 2550  -  total flux cleaned = 0.000317675 Jy
! Component: 2600  -  total flux cleaned = 0.000343139 Jy
! Component: 2650  -  total flux cleaned = 0.000368514 Jy
! Component: 2700  -  total flux cleaned = 0.000406581 Jy
! Component: 2750  -  total flux cleaned = 0.000444367 Jy
! Component: 2800  -  total flux cleaned = 0.000444446 Jy
! Component: 2850  -  total flux cleaned = 0.000519139 Jy
! Component: 2900  -  total flux cleaned = 0.000481942 Jy
! Component: 2950  -  total flux cleaned = 0.000481951 Jy
! Component: 3000  -  total flux cleaned = 0.000469709 Jy
! Component: 3050  -  total flux cleaned = 0.000579156 Jy
! Component: 3100  -  total flux cleaned = 0.000494381 Jy
! Component: 3150  -  total flux cleaned = 0.000494352 Jy
! Component: 3200  -  total flux cleaned = 0.000542325 Jy
! Component: 3250  -  total flux cleaned = 0.000554227 Jy
! Component: 3300  -  total flux cleaned = 0.000565993 Jy
! Component: 3350  -  total flux cleaned = 0.000554122 Jy
! Component: 3400  -  total flux cleaned = 0.000554092 Jy
! Component: 3450  -  total flux cleaned = 0.000565639 Jy
! Component: 3500  -  total flux cleaned = 0.00056568 Jy
! Component: 3550  -  total flux cleaned = 0.000542605 Jy
! Component: 3600  -  total flux cleaned = 0.00054254 Jy
! Component: 3650  -  total flux cleaned = 0.000565425 Jy
! Component: 3700  -  total flux cleaned = 0.000554021 Jy
! Component: 3750  -  total flux cleaned = 0.000565263 Jy
! Component: 3800  -  total flux cleaned = 0.000553986 Jy
! Component: 3850  -  total flux cleaned = 0.000542806 Jy
! Component: 3900  -  total flux cleaned = 0.000509467 Jy
! Component: 3950  -  total flux cleaned = 0.000487241 Jy
! Component: 4000  -  total flux cleaned = 0.000498129 Jy
! Component: 4050  -  total flux cleaned = 0.000531003 Jy
! Total flux subtracted in 4096 components = 0.000487273 Jy
! Clean residual min=-0.000794 max=0.000827 Jy/beam
! Clean residual mean=0.000000 rms=0.000190 Jy/beam
! Combined flux in latest and established models = 0.159 Jy
keep
! Adding 298 model components to the UV plane model.
! The established model now contains 378 components and 0.159001 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J1352-2745_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8183 x 1.99 at -4.339 degrees (North through East)
! Clean map  min=-0.0010666  max=0.13379 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J1352-2745_X_map.fits
wmodel /vlbi/bp222/maps//J1352-2745_X_map.mod
! Writing 378 model components to file: /vlbi/bp222/maps//J1352-2745_X_map.mod
wobs   /vlbi/bp222/maps//J1352-2745_X_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J1352-2745_X_uvs.fits
wwins  /vlbi/bp222/maps//J1352-2745_X_map.win
! wwins: Wrote 5 windows to /vlbi/bp222/maps//J1352-2745_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.133787 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000187912 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.421368 0.421368 0.842735 1.68547 3.37094 6.74188 13.4838 26.9675 53.9351
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.133 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  711.967 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J1352-2745_X_dfm.log closed on Thu Sep 27 11:12:30 2018