! Started logfile: /vlbi/bp222/maps//J1057-2342_X_dfm.log on Thu Sep 27 11:03:41 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1057-2342_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1057-2342_X_uvm.fits ! AN table 1: 65 integrations on 28 of 28 possible baselines. ! AN table 2: 23 integrations on 15 of 15 possible baselines. ! AN table 3: 22 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.9174 visibilities/baseline/integration-bin. ! Found source: J1057-2342 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 108 lines of history. ! ! Reading 26256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1057-2342_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 25 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.054804Jy sigma=12.341685 ! Fit after self-cal, rms=0.682136Jy sigma=7.841520 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6909 mas, bmaj=3.76 mas, bpa=-17.61 degrees ! Estimated noise=0.822464 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.237832 Jy ! Component: 100 - total flux cleaned = 0.303 Jy ! Total flux subtracted in 100 components = 0.303 Jy ! Clean residual min=-0.011482 max=0.028839 Jy/beam ! Clean residual mean=0.000015 rms=0.002948 Jy/beam ! Combined flux in latest and established models = 0.303 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.303 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.092669Jy sigma=1.027434 ! Fit after self-cal, rms=0.092552Jy sigma=1.026416 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316209 Jy ! Component: 100 - total flux cleaned = 0.0486449 Jy ! Total flux subtracted in 100 components = 0.0486449 Jy ! Clean residual min=-0.007676 max=0.009053 Jy/beam ! Clean residual mean=0.000006 rms=0.001725 Jy/beam ! Combined flux in latest and established models = 0.351645 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 0.351645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.079599Jy sigma=0.806078 ! Fit after self-cal, rms=0.079527Jy sigma=0.805532 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9392 mas, bmaj=3.975 mas, bpa=-15.67 degrees ! Estimated noise=0.400696 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013597 Jy ! Component: 100 - total flux cleaned = 0.0203124 Jy ! Component: 150 - total flux cleaned = 0.023731 Jy ! Component: 200 - total flux cleaned = 0.0249119 Jy ! Total flux subtracted in 200 components = 0.0249119 Jy ! Clean residual min=-0.005440 max=0.006680 Jy/beam ! Clean residual mean=0.000003 rms=0.001425 Jy/beam ! Combined flux in latest and established models = 0.376557 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.376557 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077846Jy sigma=0.770148 ! Fit after self-cal, rms=0.077836Jy sigma=0.770032 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9392 x 3.975 at -15.67 degrees (North through East) ! Clean map min=-0.0050783 max=0.32252 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.01 HN 1.13 KP 1.00 ! MK 1.01 NL 0.95 OV 0.99 PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.02 HN 1.06 LA 0.99 NL 1.01 ! OV 1.03 PT 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.99 HN 0.99 KP 1.00 ! OV 1.01 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.11 KP 1.01 ! MK 1.01 NL 0.94 OV 1.00 PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.03 LA 0.98 NL 1.08 ! OV 0.99 PT 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.09 FD 1.00 HN 1.00 KP 0.99 ! OV 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.16 KP 1.01 ! MK 1.00 NL 0.93 OV 1.00 PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.01 HN 1.03 LA 0.99 NL 1.02 ! OV 1.02 PT 1.09 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 0.99 HN 1.06 KP 1.01 ! OV 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.15 KP 1.00 ! MK 1.01 NL 0.94 OV 1.00 PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.06 LA 0.98 NL 1.04 ! OV 1.01 PT 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.08 FD 1.00 HN 1.00 KP 0.99 ! OV 1.01 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.07 KP 1.00 ! MK 1.00 NL 0.95 OV 0.99 PT 1.02 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.05 LA 1.00 NL 1.03 ! OV 1.05 PT 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 0.98 HN 0.98 KP 0.99 ! OV 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 1.13 KP 1.00 ! MK 0.99 NL 0.92 OV 1.00 PT 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.00 HN 1.00 LA 1.01 NL 1.04 ! OV 1.01 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.01 HN 0.97 KP 1.00 ! OV 1.03 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.09 KP 1.00 ! MK 0.99 NL 0.93 OV 0.98 PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.03 LA 0.97 NL 1.03 ! OV 1.01 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.01 HN 1.00 KP 1.00 ! OV 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.00 HN 1.12 KP 0.99 ! MK 1.02 NL 0.92 OV 0.99 PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.03 LA 1.00 NL 0.99 ! OV 1.01 PT 1.05 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.00 HN 1.00 KP 0.97 ! OV 0.98 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.06 KP 0.99 ! MK 0.97 NL 0.92 OV 0.98 PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 1.03 HN 1.02 LA 1.01 NL 1.00 ! OV 0.99 PT 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.99 HN 0.96 KP 1.01 ! OV 0.98 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.08 KP 0.99 ! MK 0.98 NL 0.92 OV 0.98 PT 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.03 LA 1.02 NL 1.01 ! OV 1.00 PT 1.11 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.00 HN 0.98 KP 0.97 ! OV 0.99 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.07 KP 1.00 ! MK 0.98 NL 0.92 OV 0.97 PT 1.00 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.03 LA 1.01 NL 0.99 ! OV 1.03 PT 1.08 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.97 HN 0.95 KP 0.98 ! OV 1.01 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.98 HN 1.04 KP 0.99 ! MK 0.98 NL 0.95 OV 0.98 PT 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.99 HN 1.06 LA 0.95 NL 1.02 ! OV 0.99 PT 1.03 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.99 HN 0.98 KP 0.97 ! OV 0.99 ! ! ! Fit before self-cal, rms=0.077836Jy sigma=0.770032 ! Fit after self-cal, rms=0.077241Jy sigma=0.744150 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9439 mas, bmaj=3.981 mas, bpa=-15.83 degrees ! Estimated noise=0.400426 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00228382 Jy ! Component: 100 - total flux cleaned = -0.00262576 Jy ! Component: 150 - total flux cleaned = -0.00276942 Jy ! Component: 200 - total flux cleaned = -0.00285369 Jy ! Total flux subtracted in 200 components = -0.00285369 Jy ! Clean residual min=-0.005055 max=0.005748 Jy/beam ! Clean residual mean=-0.000000 rms=0.001126 Jy/beam ! Combined flux in latest and established models = 0.373703 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 40 components and 0.373703 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.077101Jy sigma=0.743458 ! Fit after self-cal, rms=0.077125Jy sigma=0.743394 ! Inverting map ! Added new window around map position (12, 26.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205193 Jy ! Component: 100 - total flux cleaned = 0.0011422 Jy ! Component: 150 - total flux cleaned = 0.00033574 Jy ! Component: 200 - total flux cleaned = -0.000135978 Jy ! Total flux subtracted in 200 components = -0.000135978 Jy ! Clean residual min=-0.004319 max=0.004862 Jy/beam ! Clean residual mean=0.000000 rms=0.001052 Jy/beam ! Combined flux in latest and established models = 0.373567 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 78 components and 0.373567 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076470Jy sigma=0.738010 ! Fit after self-cal, rms=0.076436Jy sigma=0.737527 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076436Jy sigma=0.737527 ! Fit after self-cal, rms=0.076603Jy sigma=0.736020 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9442 mas, bmaj=3.989 mas, bpa=-15.86 degrees ! Estimated noise=0.399671 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000801902 Jy ! Component: 100 - total flux cleaned = -0.00109091 Jy ! Component: 150 - total flux cleaned = -0.00142151 Jy ! Component: 200 - total flux cleaned = -0.00171434 Jy ! Total flux subtracted in 200 components = -0.00171434 Jy ! Clean residual min=-0.004211 max=0.004580 Jy/beam ! Clean residual mean=-0.000000 rms=0.000993 Jy/beam ! Combined flux in latest and established models = 0.371853 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 95 components and 0.371853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.076363Jy sigma=0.734008 ! Fit after self-cal, rms=0.076360Jy sigma=0.733819 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (10.4, 14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000579778 Jy ! Component: 100 - total flux cleaned = 0.000155002 Jy ! Component: 150 - total flux cleaned = -0.000500173 Jy ! Component: 200 - total flux cleaned = -0.000875439 Jy ! Total flux subtracted in 200 components = -0.000875439 Jy ! Clean residual min=-0.003883 max=0.003485 Jy/beam ! Clean residual mean=0.000000 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.370978 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 125 components and 0.370978 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075845Jy sigma=0.727665 ! Fit after self-cal, rms=0.075810Jy sigma=0.727327 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075810Jy sigma=0.727327 ! Fit after self-cal, rms=0.075398Jy sigma=0.708414 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.944 mas, bmaj=3.993 mas, bpa=-15.94 degrees ! Estimated noise=0.401136 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.33708e-05 Jy ! Component: 100 - total flux cleaned = -0.000143663 Jy ! Component: 150 - total flux cleaned = -7.8893e-05 Jy ! Component: 200 - total flux cleaned = 3.02901e-05 Jy ! Total flux subtracted in 200 components = 3.02901e-05 Jy ! Clean residual min=-0.001741 max=0.002390 Jy/beam ! Clean residual mean=0.000001 rms=0.000455 Jy/beam ! Combined flux in latest and established models = 0.371008 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 148 components and 0.371008 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075267Jy sigma=0.706691 ! Fit after self-cal, rms=0.075283Jy sigma=0.706600 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.8, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022109 Jy ! Component: 100 - total flux cleaned = 0.0027939 Jy ! Component: 150 - total flux cleaned = 0.00314779 Jy ! Component: 200 - total flux cleaned = 0.00338385 Jy ! Total flux subtracted in 200 components = 0.00338385 Jy ! Clean residual min=-0.001741 max=0.001720 Jy/beam ! Clean residual mean=0.000001 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.374392 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 176 components and 0.374392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075184Jy sigma=0.705600 ! Fit after self-cal, rms=0.075173Jy sigma=0.705488 ! Inverting map ! Added new window around map position (13.2, -5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102972 Jy ! Component: 100 - total flux cleaned = 0.00161837 Jy ! Component: 150 - total flux cleaned = 0.00228647 Jy ! Component: 200 - total flux cleaned = 0.00281575 Jy ! Total flux subtracted in 200 components = 0.00281575 Jy ! Clean residual min=-0.001531 max=0.001495 Jy/beam ! Clean residual mean=0.000000 rms=0.000369 Jy/beam ! Combined flux in latest and established models = 0.377208 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 206 components and 0.377208 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075099Jy sigma=0.704711 ! Fit after self-cal, rms=0.075096Jy sigma=0.704677 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075096Jy sigma=0.704677 ! Fit after self-cal, rms=0.075205Jy sigma=0.704284 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.199 mas, bmaj=5.28 mas, bpa=-2.429 degrees ! Estimated noise=0.45792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000727503 Jy ! Component: 100 - total flux cleaned = 0.00113937 Jy ! Component: 150 - total flux cleaned = 0.0013275 Jy ! Component: 200 - total flux cleaned = 0.00149142 Jy ! Total flux subtracted in 200 components = 0.00149142 Jy ! Clean residual min=-0.001282 max=0.001361 Jy/beam ! Clean residual mean=0.000000 rms=0.000368 Jy/beam ! Combined flux in latest and established models = 0.378699 Jy selfcal ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 228 components and 0.378699 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075169Jy sigma=0.703828 ! Fit after self-cal, rms=0.075168Jy sigma=0.703772 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306725 Jy ! Component: 100 - total flux cleaned = 0.000505932 Jy ! Component: 150 - total flux cleaned = 0.00068578 Jy ! Component: 200 - total flux cleaned = 0.00084811 Jy ! Total flux subtracted in 200 components = 0.00084811 Jy ! Clean residual min=-0.001245 max=0.001275 Jy/beam ! Clean residual mean=0.000000 rms=0.000340 Jy/beam ! Combined flux in latest and established models = 0.379547 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 244 components and 0.379547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075151Jy sigma=0.703633 ! Fit after self-cal, rms=0.075148Jy sigma=0.703613 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9441 mas, bmaj=3.995 mas, bpa=-15.95 degrees ! Estimated noise=0.400783 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9441 x 3.995 at -15.95 degrees (North through East) ! Clean map min=-0.0023859 max=0.32197 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6939 mas, bmaj=3.799 mas, bpa=-17.89 degrees ! Estimated noise=0.824526 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238181 Jy ! Component: 100 - total flux cleaned = 0.303941 Jy ! Component: 150 - total flux cleaned = 0.335172 Jy ! Component: 200 - total flux cleaned = 0.35063 Jy ! Total flux subtracted in 200 components = 0.35063 Jy ! Clean residual min=-0.004504 max=0.007923 Jy/beam ! Clean residual mean=0.000004 rms=0.001121 Jy/beam ! Combined flux in latest and established models = 0.35063 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.35063 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9441 mas, bmaj=3.995 mas, bpa=-15.95 degrees ! Estimated noise=0.400783 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0114159 Jy ! Component: 100 - total flux cleaned = 0.017448 Jy ! Component: 150 - total flux cleaned = 0.0212232 Jy ! Component: 200 - total flux cleaned = 0.0229963 Jy ! Total flux subtracted in 200 components = 0.0229963 Jy ! Clean residual min=-0.002154 max=0.002061 Jy/beam ! Clean residual mean=0.000002 rms=0.000444 Jy/beam ! Combined flux in latest and established models = 0.373626 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 40 components and 0.373626 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.199 mas, bmaj=5.28 mas, bpa=-2.429 degrees ! Estimated noise=0.45792 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220968 Jy ! Component: 100 - total flux cleaned = 0.00282469 Jy ! Component: 150 - total flux cleaned = 0.00341136 Jy ! Component: 200 - total flux cleaned = 0.00380651 Jy ! Total flux subtracted in 200 components = 0.00380651 Jy ! Clean residual min=-0.001555 max=0.001615 Jy/beam ! Clean residual mean=0.000002 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.377433 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000204232 Jy ! Component: 100 - total flux cleaned = 0.000393037 Jy ! Component: 150 - total flux cleaned = 0.000608764 Jy ! Component: 200 - total flux cleaned = 0.00080979 Jy ! Total flux subtracted in 200 components = 0.00080979 Jy ! Clean residual min=-0.001405 max=0.001495 Jy/beam ! Clean residual mean=0.000001 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.378242 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 108 components and 0.378243 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9441 mas, bmaj=3.995 mas, bpa=-15.95 degrees ! Estimated noise=0.400783 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000107715 Jy ! Component: 100 - total flux cleaned = 8.40968e-05 Jy ! Component: 150 - total flux cleaned = 0.000258547 Jy ! Component: 200 - total flux cleaned = 0.000419847 Jy ! Total flux subtracted in 200 components = 0.000419847 Jy ! Clean residual min=-0.001486 max=0.001420 Jy/beam ! Clean residual mean=0.000001 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.378662 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 136 components and 0.378662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075195Jy sigma=0.704315 ! Fit after self-cal, rms=0.075160Jy sigma=0.703978 wmodel J1057-2342_X_map.mod ! Writing 136 model components to file: J1057-2342_X_map.mod wobs J1057-2342_X_uvs.fits ! Writing UV FITS file: J1057-2342_X_uvs.fits wwins J1057-2342_X_map.win ! wwins: Wrote 5 windows to J1057-2342_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000372076 Jy ! Component: 100 - total flux cleaned = -0.00083184 Jy ! Component: 150 - total flux cleaned = -0.00126822 Jy ! Component: 200 - total flux cleaned = -0.00158175 Jy ! Component: 250 - total flux cleaned = -0.00180291 Jy ! Component: 300 - total flux cleaned = -0.00193903 Jy ! Component: 350 - total flux cleaned = -0.00201481 Jy ! Component: 400 - total flux cleaned = -0.00203305 Jy ! Component: 450 - total flux cleaned = -0.00196044 Jy ! Component: 500 - total flux cleaned = -0.00187172 Jy ! Component: 550 - total flux cleaned = -0.00174955 Jy ! Component: 600 - total flux cleaned = -0.00169815 Jy ! Component: 650 - total flux cleaned = -0.00164718 Jy ! Component: 700 - total flux cleaned = -0.00158056 Jy ! Component: 750 - total flux cleaned = -0.00151511 Jy ! Component: 800 - total flux cleaned = -0.00151521 Jy ! Component: 850 - total flux cleaned = -0.00145085 Jy ! Component: 900 - total flux cleaned = -0.00138781 Jy ! Component: 950 - total flux cleaned = -0.00137243 Jy ! Component: 1000 - total flux cleaned = -0.00134178 Jy ! Component: 1050 - total flux cleaned = -0.00131154 Jy ! Component: 1100 - total flux cleaned = -0.00132659 Jy ! Component: 1150 - total flux cleaned = -0.00132644 Jy ! Component: 1200 - total flux cleaned = -0.00134073 Jy ! Component: 1250 - total flux cleaned = -0.00128316 Jy ! Component: 1300 - total flux cleaned = -0.00129737 Jy ! Component: 1350 - total flux cleaned = -0.00126924 Jy ! Component: 1400 - total flux cleaned = -0.00124132 Jy ! Component: 1450 - total flux cleaned = -0.00122723 Jy ! Component: 1500 - total flux cleaned = -0.00122725 Jy ! Component: 1550 - total flux cleaned = -0.0011734 Jy ! Component: 1600 - total flux cleaned = -0.00121365 Jy ! Component: 1650 - total flux cleaned = -0.00117387 Jy ! Component: 1700 - total flux cleaned = -0.00114756 Jy ! Component: 1750 - total flux cleaned = -0.00114738 Jy ! Component: 1800 - total flux cleaned = -0.00113456 Jy ! Component: 1850 - total flux cleaned = -0.0011219 Jy ! Component: 1900 - total flux cleaned = -0.00110943 Jy ! Component: 1950 - total flux cleaned = -0.00112194 Jy ! Component: 2000 - total flux cleaned = -0.0011343 Jy ! Component: 2050 - total flux cleaned = -0.00107239 Jy ! Component: 2100 - total flux cleaned = -0.00110919 Jy ! Component: 2150 - total flux cleaned = -0.00107271 Jy ! Component: 2200 - total flux cleaned = -0.00112082 Jy ! Component: 2250 - total flux cleaned = -0.00112071 Jy ! Component: 2300 - total flux cleaned = -0.00107324 Jy ! Component: 2350 - total flux cleaned = -0.00108479 Jy ! Component: 2400 - total flux cleaned = -0.00106139 Jy ! Component: 2450 - total flux cleaned = -0.00103814 Jy ! Component: 2500 - total flux cleaned = -0.00106115 Jy ! Component: 2550 - total flux cleaned = -0.00111811 Jy ! Component: 2600 - total flux cleaned = -0.00110664 Jy ! Component: 2650 - total flux cleaned = -0.00114036 Jy ! Component: 2700 - total flux cleaned = -0.00107344 Jy ! Component: 2750 - total flux cleaned = -0.00112881 Jy ! Component: 2800 - total flux cleaned = -0.00111778 Jy ! Component: 2850 - total flux cleaned = -0.00112861 Jy ! Component: 2900 - total flux cleaned = -0.00115029 Jy ! Component: 2950 - total flux cleaned = -0.00113943 Jy ! Component: 3000 - total flux cleaned = -0.00119289 Jy ! Component: 3050 - total flux cleaned = -0.00118224 Jy ! Component: 3100 - total flux cleaned = -0.00122443 Jy ! Component: 3150 - total flux cleaned = -0.00120349 Jy ! Component: 3200 - total flux cleaned = -0.00122441 Jy ! Component: 3250 - total flux cleaned = -0.00123475 Jy ! Component: 3300 - total flux cleaned = -0.00124508 Jy ! Component: 3350 - total flux cleaned = -0.00125537 Jy ! Component: 3400 - total flux cleaned = -0.00120446 Jy ! Component: 3450 - total flux cleaned = -0.0012146 Jy ! Component: 3500 - total flux cleaned = -0.00123462 Jy ! Component: 3550 - total flux cleaned = -0.0012445 Jy ! Component: 3600 - total flux cleaned = -0.00123443 Jy ! Component: 3650 - total flux cleaned = -0.00122451 Jy ! Component: 3700 - total flux cleaned = -0.00115557 Jy ! Component: 3750 - total flux cleaned = -0.00116555 Jy ! Component: 3800 - total flux cleaned = -0.00118498 Jy ! Component: 3850 - total flux cleaned = -0.00120442 Jy ! Component: 3900 - total flux cleaned = -0.001166 Jy ! Component: 3950 - total flux cleaned = -0.00112766 Jy ! Component: 4000 - total flux cleaned = -0.00117537 Jy ! Component: 4050 - total flux cleaned = -0.00117525 Jy ! Total flux subtracted in 4096 components = -0.00118467 Jy ! Clean residual min=-0.000505 max=0.000509 Jy/beam ! Clean residual mean=0.000000 rms=0.000172 Jy/beam ! Combined flux in latest and established models = 0.377478 Jy keep ! Adding 317 model components to the UV plane model. ! The established model now contains 453 components and 0.377478 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1057-2342_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9441 x 3.995 at -15.95 degrees (North through East) ! Clean map min=-0.0017922 max=0.3217 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1057-2342_X_map.fits wmodel /vlbi/bp222/maps//J1057-2342_X_map.mod ! Writing 453 model components to file: /vlbi/bp222/maps//J1057-2342_X_map.mod wobs /vlbi/bp222/maps//J1057-2342_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1057-2342_X_uvs.fits wwins /vlbi/bp222/maps//J1057-2342_X_map.win ! wwins: Wrote 6 windows to /vlbi/bp222/maps//J1057-2342_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.321698 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000171767 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.160181 0.160181 0.320363 0.640726 1.28145 2.5629 5.12581 10.2516 20.5032 41.0065 82.0129 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.321 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1872.88 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1057-2342_X_dfm.log closed on Thu Sep 27 11:03:47 2018