! Started logfile: /vlbi/bp222/maps//J1054+8629_X_dfm.log on Thu Sep 27 11:03:27 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1054+8629_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1054+8629_X_uva.fits ! AN table 1: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.964251 visibilities/baseline/integration-bin. ! Found source: J1054+8629 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 59880 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1054+8629_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 33 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002907Jy sigma=14.319272 ! Fit after self-cal, rms=0.962529Jy sigma=13.712431 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6572 mas, bmaj=1.141 mas, bpa=-73.96 degrees ! Estimated noise=0.472351 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291741 Jy ! Component: 100 - total flux cleaned = 0.0364246 Jy ! Total flux subtracted in 100 components = 0.0364246 Jy ! Clean residual min=-0.002701 max=0.007638 Jy/beam ! Clean residual mean=0.000003 rms=0.000664 Jy/beam ! Combined flux in latest and established models = 0.0364246 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0364246 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.066939Jy sigma=0.890120 ! Fit after self-cal, rms=0.065115Jy sigma=0.865815 ! Inverting map ! Added new window around map position (1.4, -5.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00847415 Jy ! Component: 100 - total flux cleaned = 0.0127502 Jy ! Total flux subtracted in 100 components = 0.0127502 Jy ! Clean residual min=-0.002660 max=0.004515 Jy/beam ! Clean residual mean=0.000002 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0491748 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 13 components and 0.0491748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063757Jy sigma=0.843007 ! Fit after self-cal, rms=0.063280Jy sigma=0.836955 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0060294 Jy ! Component: 100 - total flux cleaned = 0.00896818 Jy ! Total flux subtracted in 100 components = 0.00896818 Jy ! Clean residual min=-0.002426 max=0.003145 Jy/beam ! Clean residual mean=0.000002 rms=0.000555 Jy/beam ! Combined flux in latest and established models = 0.0581429 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 17 components and 0.0581429 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.062553Jy sigma=0.824546 ! Fit after self-cal, rms=0.062204Jy sigma=0.820287 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00442983 Jy ! Component: 100 - total flux cleaned = 0.00659024 Jy ! Total flux subtracted in 100 components = 0.00659024 Jy ! Clean residual min=-0.002296 max=0.003529 Jy/beam ! Clean residual mean=0.000001 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 0.0647332 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 20 components and 0.0647332 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061813Jy sigma=0.813447 ! Fit after self-cal, rms=0.061672Jy sigma=0.811912 ! Inverting map ! Added new window around map position (-1.4, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00394991 Jy ! Component: 100 - total flux cleaned = 0.00635251 Jy ! Total flux subtracted in 100 components = 0.00635251 Jy ! Clean residual min=-0.002135 max=0.002699 Jy/beam ! Clean residual mean=0.000000 rms=0.000523 Jy/beam ! Combined flux in latest and established models = 0.0710857 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 0.0710857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061278Jy sigma=0.804858 ! Fit after self-cal, rms=0.061165Jy sigma=0.803801 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8957 mas, bmaj=1.514 mas, bpa=-75.55 degrees ! Estimated noise=0.214349 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00472381 Jy ! Component: 100 - total flux cleaned = 0.00757079 Jy ! Component: 150 - total flux cleaned = 0.00894175 Jy ! Component: 200 - total flux cleaned = 0.00979854 Jy ! Total flux subtracted in 200 components = 0.00979854 Jy ! Clean residual min=-0.001361 max=0.002482 Jy/beam ! Clean residual mean=-0.000003 rms=0.000346 Jy/beam ! Combined flux in latest and established models = 0.0808842 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 52 components and 0.0808842 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060794Jy sigma=0.797023 ! Fit after self-cal, rms=0.060641Jy sigma=0.795233 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00167281 Jy ! Component: 100 - total flux cleaned = 0.00253249 Jy ! Component: 150 - total flux cleaned = 0.00324891 Jy ! Component: 200 - total flux cleaned = 0.00379595 Jy ! Total flux subtracted in 200 components = 0.00379595 Jy ! Clean residual min=-0.001251 max=0.001893 Jy/beam ! Clean residual mean=-0.000004 rms=0.000300 Jy/beam ! Combined flux in latest and established models = 0.0846802 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 57 components and 0.0846802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060484Jy sigma=0.792685 ! Fit after self-cal, rms=0.060402Jy sigma=0.791637 ! Inverting map ! Added new window around map position (-1.6, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00136952 Jy ! Component: 100 - total flux cleaned = 0.00213991 Jy ! Component: 150 - total flux cleaned = 0.00281143 Jy ! Component: 200 - total flux cleaned = 0.00334093 Jy ! Total flux subtracted in 200 components = 0.00334093 Jy ! Clean residual min=-0.001157 max=0.001502 Jy/beam ! Clean residual mean=-0.000004 rms=0.000271 Jy/beam ! Combined flux in latest and established models = 0.0880211 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 69 components and 0.0880211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060308Jy sigma=0.790071 ! Fit after self-cal, rms=0.060261Jy sigma=0.789624 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8957 x 1.514 at -75.55 degrees (North through East) ! Clean map min=-0.0011254 max=0.035286 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.15 KP 0.97 ! LA 1.00 MK 1.10 NL 1.04 OV 0.97 ! PT 1.00 SC 1.05 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.03 KP 1.05 ! LA 0.98 MK 1.07 NL 1.08 OV 0.99 ! PT 1.02 SC 0.99 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.96 HN 1.01 KP 0.95 ! LA 1.00 MK 1.05 NL 1.08 OV 1.01 ! PT 1.04 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.00 HN 1.04 KP 0.99 ! LA 0.99 MK 0.98 NL 1.08 OV 1.02 ! PT 0.96 SC 1.15 ! ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 1.04 KP 0.99 ! LA 0.95 MK 0.93 NL 1.03 OV 1.03 ! PT 1.03 SC 1.03 ! ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.02 HN 1.02 KP 0.97 ! LA 0.99 MK 0.98 NL 1.06 OV 1.02 ! PT 1.02 SC 1.05 ! ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 1.00 HN 1.02 KP 0.96 ! LA 0.96 MK 0.96 NL 1.05 OV 0.99 ! PT 0.97 SC 1.09 ! ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.99 HN 1.01 KP 0.97 ! LA 0.95 MK 0.99 NL 1.02 OV 0.97 ! PT 1.05 SC 1.05 ! ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.93 HN 1.01 KP 0.98 ! LA 0.92 MK 0.97 NL 0.99 OV 1.04 ! PT 1.06 SC 1.04 ! ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.93 HN 0.93 KP 0.94 ! LA 0.98 MK 0.95 NL 1.02 OV 1.00 ! PT 1.02 SC 1.10 ! ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 0.95 HN 0.96 KP 1.00 ! LA 0.96 MK 0.88 NL 0.99 OV 1.00 ! PT 1.00 SC 1.04 ! ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.93 KP 0.93 ! LA 0.98 MK 0.86 NL 1.07 OV 1.01 ! PT 1.00 SC 0.96 ! ! ! Fit before self-cal, rms=0.060261Jy sigma=0.789624 ! Fit after self-cal, rms=0.059693Jy sigma=0.788521 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8998 mas, bmaj=1.519 mas, bpa=-75.24 degrees ! Estimated noise=0.212223 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000143944 Jy ! Component: 100 - total flux cleaned = 0.000369598 Jy ! Component: 150 - total flux cleaned = 0.000625638 Jy ! Component: 200 - total flux cleaned = 0.000821645 Jy ! Total flux subtracted in 200 components = 0.000821645 Jy ! Clean residual min=-0.001022 max=0.000990 Jy/beam ! Clean residual mean=-0.000004 rms=0.000240 Jy/beam ! Combined flux in latest and established models = 0.0888427 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 77 components and 0.0888427 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059641Jy sigma=0.787766 ! Fit after self-cal, rms=0.059650Jy sigma=0.787387 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059650Jy sigma=0.787387 ! Fit after self-cal, rms=0.059514Jy sigma=0.786295 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8984 mas, bmaj=1.519 mas, bpa=-75.03 degrees ! Estimated noise=0.210383 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000236521 Jy ! Component: 100 - total flux cleaned = 0.000113511 Jy ! Component: 150 - total flux cleaned = 0.00031256 Jy ! Component: 200 - total flux cleaned = 0.000467519 Jy ! Total flux subtracted in 200 components = 0.000467519 Jy ! Clean residual min=-0.000963 max=0.000985 Jy/beam ! Clean residual mean=-0.000004 rms=0.000221 Jy/beam ! Combined flux in latest and established models = 0.0893102 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 80 components and 0.0893102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059482Jy sigma=0.785895 ! Fit after self-cal, rms=0.059504Jy sigma=0.785729 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000166985 Jy ! Component: 100 - total flux cleaned = 0.000356958 Jy ! Component: 150 - total flux cleaned = 0.000461606 Jy ! Component: 200 - total flux cleaned = 0.000555939 Jy ! Total flux subtracted in 200 components = 0.000555939 Jy ! Clean residual min=-0.000943 max=0.000912 Jy/beam ! Clean residual mean=-0.000004 rms=0.000217 Jy/beam ! Combined flux in latest and established models = 0.0898662 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 82 components and 0.0898662 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059487Jy sigma=0.785490 ! Fit after self-cal, rms=0.059484Jy sigma=0.785446 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059484Jy sigma=0.785446 ! Fit after self-cal, rms=0.059292Jy sigma=0.784223 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8953 mas, bmaj=1.515 mas, bpa=-74.8 degrees ! Estimated noise=0.207642 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000241345 Jy ! Component: 100 - total flux cleaned = -0.000100552 Jy ! Component: 150 - total flux cleaned = -1.28208e-05 Jy ! Component: 200 - total flux cleaned = -1.27655e-05 Jy ! Total flux subtracted in 200 components = -1.27655e-05 Jy ! Clean residual min=-0.000893 max=0.000824 Jy/beam ! Clean residual mean=-0.000001 rms=0.000197 Jy/beam ! Combined flux in latest and established models = 0.0898534 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 90 components and 0.0898534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059276Jy sigma=0.784034 ! Fit after self-cal, rms=0.059320Jy sigma=0.783900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.6079e-05 Jy ! Component: 100 - total flux cleaned = 0.00014978 Jy ! Component: 150 - total flux cleaned = 0.000165172 Jy ! Component: 200 - total flux cleaned = 0.000179703 Jy ! Total flux subtracted in 200 components = 0.000179703 Jy ! Clean residual min=-0.000896 max=0.000822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000195 Jy/beam ! Combined flux in latest and established models = 0.0900331 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 93 components and 0.0900331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059312Jy sigma=0.783773 ! Fit after self-cal, rms=0.059308Jy sigma=0.783738 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059308Jy sigma=0.783738 ! Fit after self-cal, rms=0.058858Jy sigma=0.783684 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=3.166 mas, bpa=-78.16 degrees ! Estimated noise=0.258916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000503908 Jy ! Component: 100 - total flux cleaned = 0.000568055 Jy ! Component: 150 - total flux cleaned = 0.000586359 Jy ! Component: 200 - total flux cleaned = 0.000602163 Jy ! Total flux subtracted in 200 components = 0.000602163 Jy ! Clean residual min=-0.001021 max=0.001073 Jy/beam ! Clean residual mean=-0.000003 rms=0.000259 Jy/beam ! Combined flux in latest and established models = 0.0906353 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 97 components and 0.0906353 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058858Jy sigma=0.783632 ! Fit after self-cal, rms=0.058858Jy sigma=0.783559 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, 6.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00109444 Jy ! Component: 100 - total flux cleaned = 0.00171634 Jy ! Component: 150 - total flux cleaned = 0.00196803 Jy ! Component: 200 - total flux cleaned = 0.00206702 Jy ! Total flux subtracted in 200 components = 0.00206702 Jy ! Clean residual min=-0.000921 max=0.000864 Jy/beam ! Clean residual mean=-0.000003 rms=0.000233 Jy/beam ! Combined flux in latest and established models = 0.0927023 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 117 components and 0.0927023 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058846Jy sigma=0.783355 ! Fit after self-cal, rms=0.058842Jy sigma=0.783314 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8932 mas, bmaj=1.509 mas, bpa=-74.65 degrees ! Estimated noise=0.205584 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8932 x 1.509 at -74.65 degrees (North through East) ! Clean map min=-0.00079651 max=0.031979 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6542 mas, bmaj=1.14 mas, bpa=-73.01 degrees ! Estimated noise=0.453171 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302945 Jy ! Component: 100 - total flux cleaned = 0.0448774 Jy ! Component: 150 - total flux cleaned = 0.0533267 Jy ! Component: 200 - total flux cleaned = 0.0593454 Jy ! Total flux subtracted in 200 components = 0.0593454 Jy ! Clean residual min=-0.002177 max=0.003544 Jy/beam ! Clean residual mean=0.000005 rms=0.000532 Jy/beam ! Combined flux in latest and established models = 0.0593454 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0593454 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8932 mas, bmaj=1.509 mas, bpa=-74.65 degrees ! Estimated noise=0.205584 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00857204 Jy ! Component: 100 - total flux cleaned = 0.0139558 Jy ! Component: 150 - total flux cleaned = 0.0177802 Jy ! Component: 200 - total flux cleaned = 0.0206279 Jy ! Total flux subtracted in 200 components = 0.0206279 Jy ! Clean residual min=-0.001187 max=0.001941 Jy/beam ! Clean residual mean=0.000003 rms=0.000274 Jy/beam ! Combined flux in latest and established models = 0.0799732 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 59 components and 0.0799733 Jy ! Inverting map ! Added new window around map position (-1.8, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224214 Jy ! Component: 100 - total flux cleaned = 0.00397839 Jy ! Component: 150 - total flux cleaned = 0.00537443 Jy ! Component: 200 - total flux cleaned = 0.00655383 Jy ! Total flux subtracted in 200 components = 0.00655383 Jy ! Clean residual min=-0.000868 max=0.000973 Jy/beam ! Clean residual mean=0.000000 rms=0.000207 Jy/beam ! Combined flux in latest and established models = 0.0865271 Jy ! Adding 47 model components to the UV plane model. ! The established model now contains 96 components and 0.0865271 Jy ! Inverting map ! Added new window around map position (0.2, -1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108673 Jy ! Component: 100 - total flux cleaned = 0.00200822 Jy ! Component: 150 - total flux cleaned = 0.00282176 Jy ! Component: 200 - total flux cleaned = 0.00354597 Jy ! Total flux subtracted in 200 components = 0.00354597 Jy ! Clean residual min=-0.000774 max=0.000777 Jy/beam ! Clean residual mean=-0.000000 rms=0.000185 Jy/beam ! Combined flux in latest and established models = 0.0900731 Jy ! Adding 51 model components to the UV plane model. ! The established model now contains 129 components and 0.0900731 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.269 mas, bmaj=3.166 mas, bpa=-78.16 degrees ! Estimated noise=0.258916 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108415 Jy ! Component: 100 - total flux cleaned = 0.00187034 Jy ! Component: 150 - total flux cleaned = 0.00244445 Jy ! Component: 200 - total flux cleaned = 0.00277742 Jy ! Total flux subtracted in 200 components = 0.00277742 Jy ! Clean residual min=-0.000965 max=0.000803 Jy/beam ! Clean residual mean=-0.000002 rms=0.000228 Jy/beam ! Combined flux in latest and established models = 0.0928505 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000303627 Jy ! Component: 100 - total flux cleaned = 0.000548908 Jy ! Component: 150 - total flux cleaned = 0.000723015 Jy ! Component: 200 - total flux cleaned = 0.000878506 Jy ! Total flux subtracted in 200 components = 0.000878506 Jy ! Clean residual min=-0.000880 max=0.000777 Jy/beam ! Clean residual mean=-0.000003 rms=0.000220 Jy/beam ! Combined flux in latest and established models = 0.093729 Jy ! Adding 79 model components to the UV plane model. ! The established model now contains 189 components and 0.093729 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8932 mas, bmaj=1.509 mas, bpa=-74.65 degrees ! Estimated noise=0.205584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000351119 Jy ! Component: 100 - total flux cleaned = 0.000526784 Jy ! Component: 150 - total flux cleaned = 0.000672461 Jy ! Component: 200 - total flux cleaned = 0.000732951 Jy ! Total flux subtracted in 200 components = 0.000732951 Jy ! Clean residual min=-0.000711 max=0.000710 Jy/beam ! Clean residual mean=-0.000001 rms=0.000170 Jy/beam ! Combined flux in latest and established models = 0.094462 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 218 components and 0.094462 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058800Jy sigma=0.782858 ! Fit after self-cal, rms=0.058798Jy sigma=0.782662 wmodel J1054+8629_X_map.mod ! Writing 218 model components to file: J1054+8629_X_map.mod wobs J1054+8629_X_uvs.fits ! Writing UV FITS file: J1054+8629_X_uvs.fits wwins J1054+8629_X_map.win ! wwins: Wrote 7 windows to J1054+8629_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000158426 Jy ! Component: 100 - total flux cleaned = -0.000270859 Jy ! Component: 150 - total flux cleaned = -0.000380179 Jy ! Component: 200 - total flux cleaned = -0.000498736 Jy ! Component: 250 - total flux cleaned = -0.000603315 Jy ! Component: 300 - total flux cleaned = -0.000694575 Jy ! Component: 350 - total flux cleaned = -0.000750798 Jy ! Component: 400 - total flux cleaned = -0.000861431 Jy ! Component: 450 - total flux cleaned = -0.000948672 Jy ! Component: 500 - total flux cleaned = -0.0010026 Jy ! Component: 550 - total flux cleaned = -0.00105593 Jy ! Component: 600 - total flux cleaned = -0.00114005 Jy ! Component: 650 - total flux cleaned = -0.0011815 Jy ! Component: 700 - total flux cleaned = -0.00122273 Jy ! Component: 750 - total flux cleaned = -0.0012836 Jy ! Component: 800 - total flux cleaned = -0.00133357 Jy ! Component: 850 - total flux cleaned = -0.00132356 Jy ! Component: 900 - total flux cleaned = -0.0013729 Jy ! Component: 950 - total flux cleaned = -0.00141198 Jy ! Component: 1000 - total flux cleaned = -0.00146046 Jy ! Component: 1050 - total flux cleaned = -0.00152782 Jy ! Component: 1100 - total flux cleaned = -0.00149923 Jy ! Component: 1150 - total flux cleaned = -0.00155602 Jy ! Component: 1200 - total flux cleaned = -0.00157491 Jy ! Component: 1250 - total flux cleaned = -0.00160271 Jy ! Component: 1300 - total flux cleaned = -0.00162109 Jy ! Component: 1350 - total flux cleaned = -0.00163017 Jy ! Component: 1400 - total flux cleaned = -0.00165756 Jy ! Component: 1450 - total flux cleaned = -0.00163941 Jy ! Component: 1500 - total flux cleaned = -0.00165737 Jy ! Component: 1550 - total flux cleaned = -0.00164841 Jy ! Component: 1600 - total flux cleaned = -0.00165737 Jy ! Component: 1650 - total flux cleaned = -0.00169256 Jy ! Component: 1700 - total flux cleaned = -0.0016577 Jy ! Component: 1750 - total flux cleaned = -0.001649 Jy ! Component: 1800 - total flux cleaned = -0.00167496 Jy ! Component: 1850 - total flux cleaned = -0.0016578 Jy ! Component: 1900 - total flux cleaned = -0.00169185 Jy ! Component: 1950 - total flux cleaned = -0.00168338 Jy ! Component: 2000 - total flux cleaned = -0.00169177 Jy ! Component: 2050 - total flux cleaned = -0.00167499 Jy ! Component: 2100 - total flux cleaned = -0.00165829 Jy ! Component: 2150 - total flux cleaned = -0.00165825 Jy ! Component: 2200 - total flux cleaned = -0.00170777 Jy ! Component: 2250 - total flux cleaned = -0.00169144 Jy ! Component: 2300 - total flux cleaned = -0.00167514 Jy ! Component: 2350 - total flux cleaned = -0.00167514 Jy ! Component: 2400 - total flux cleaned = -0.0016832 Jy ! Component: 2450 - total flux cleaned = -0.00169929 Jy ! Component: 2500 - total flux cleaned = -0.00169925 Jy ! Component: 2550 - total flux cleaned = -0.0017152 Jy ! Component: 2600 - total flux cleaned = -0.00168352 Jy ! Component: 2650 - total flux cleaned = -0.00167558 Jy ! Component: 2700 - total flux cleaned = -0.00165983 Jy ! Component: 2750 - total flux cleaned = -0.00169898 Jy ! Component: 2800 - total flux cleaned = -0.00169892 Jy ! Component: 2850 - total flux cleaned = -0.0016911 Jy ! Component: 2900 - total flux cleaned = -0.00169109 Jy ! Component: 2950 - total flux cleaned = -0.001668 Jy ! Component: 3000 - total flux cleaned = -0.00169089 Jy ! Component: 3050 - total flux cleaned = -0.00167563 Jy ! Component: 3100 - total flux cleaned = -0.00167564 Jy ! Component: 3150 - total flux cleaned = -0.0016605 Jy ! Component: 3200 - total flux cleaned = -0.00164541 Jy ! Component: 3250 - total flux cleaned = -0.00164537 Jy ! Component: 3300 - total flux cleaned = -0.00169018 Jy ! Component: 3350 - total flux cleaned = -0.00167533 Jy ! Component: 3400 - total flux cleaned = -0.00169012 Jy ! Component: 3450 - total flux cleaned = -0.00169749 Jy ! Component: 3500 - total flux cleaned = -0.00167543 Jy ! Component: 3550 - total flux cleaned = -0.00167541 Jy ! Component: 3600 - total flux cleaned = -0.00163893 Jy ! Component: 3650 - total flux cleaned = -0.00164616 Jy ! Component: 3700 - total flux cleaned = -0.00165341 Jy ! Component: 3750 - total flux cleaned = -0.00165342 Jy ! Component: 3800 - total flux cleaned = -0.00167497 Jy ! Component: 3850 - total flux cleaned = -0.00166062 Jy ! Component: 3900 - total flux cleaned = -0.00163209 Jy ! Component: 3950 - total flux cleaned = -0.00161079 Jy ! Component: 4000 - total flux cleaned = -0.00163202 Jy ! Component: 4050 - total flux cleaned = -0.00164613 Jy ! Total flux subtracted in 4096 components = -0.00164614 Jy ! Clean residual min=-0.000507 max=0.000373 Jy/beam ! Clean residual mean=-0.000001 rms=0.000122 Jy/beam ! Combined flux in latest and established models = 0.0928158 Jy keep ! Adding 350 model components to the UV plane model. ! The established model now contains 568 components and 0.0928159 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1054+8629_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8932 x 1.509 at -74.65 degrees (North through East) ! Clean map min=-0.00057007 max=0.03139 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1054+8629_X_map.fits wmodel /vlbi/bp222/maps//J1054+8629_X_map.mod ! Writing 568 model components to file: /vlbi/bp222/maps//J1054+8629_X_map.mod wobs /vlbi/bp222/maps//J1054+8629_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1054+8629_X_uvs.fits wwins /vlbi/bp222/maps//J1054+8629_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J1054+8629_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0313896 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000121809 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.16416 1.16416 2.32832 4.65665 9.31329 18.6266 37.2532 74.5063 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.031 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 257.696 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1054+8629_X_dfm.log closed on Thu Sep 27 11:03:35 2018