! Started logfile: /vlbi/bp222/maps//J1048+6008_X_dfm.log on Thu Sep 27 11:02:33 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1048+6008_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1048+6008_X_uvm.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! AN table 2: 90 integrations on 28 of 28 possible baselines. ! AN table 3: 23 integrations on 36 of 36 possible baselines. ! AN table 4: 23 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.904225 visibilities/baseline/integration-bin. ! Found source: J1048+6008 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 49056 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1048+6008_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 53 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.002133Jy sigma=15.858009 ! Fit after self-cal, rms=0.967984Jy sigma=15.279721 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.719 mas, bmaj=1.267 mas, bpa=7.607 degrees ! Estimated noise=0.490356 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0249594 Jy ! Component: 100 - total flux cleaned = 0.0314214 Jy ! Total flux subtracted in 100 components = 0.0314214 Jy ! Clean residual min=-0.002560 max=0.003598 Jy/beam ! Clean residual mean=0.000005 rms=0.000643 Jy/beam ! Combined flux in latest and established models = 0.0314214 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.0314214 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059300Jy sigma=0.888229 ! Fit after self-cal, rms=0.057700Jy sigma=0.862979 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00525533 Jy ! Component: 100 - total flux cleaned = 0.00822915 Jy ! Total flux subtracted in 100 components = 0.00822915 Jy ! Clean residual min=-0.002608 max=0.003367 Jy/beam ! Clean residual mean=0.000004 rms=0.000612 Jy/beam ! Combined flux in latest and established models = 0.0396506 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 14 components and 0.0396506 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057071Jy sigma=0.849015 ! Fit after self-cal, rms=0.057052Jy sigma=0.848617 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9763 mas, bmaj=1.624 mas, bpa=10.24 degrees ! Estimated noise=0.210441 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00390533 Jy ! Component: 100 - total flux cleaned = 0.00568191 Jy ! Component: 150 - total flux cleaned = 0.0065675 Jy ! Component: 200 - total flux cleaned = 0.0070224 Jy ! Total flux subtracted in 200 components = 0.0070224 Jy ! Clean residual min=-0.003067 max=0.005010 Jy/beam ! Clean residual mean=0.000012 rms=0.000916 Jy/beam ! Combined flux in latest and established models = 0.046673 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.046673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056871Jy sigma=0.843792 ! Fit after self-cal, rms=0.056813Jy sigma=0.843112 ! Inverting map ! Added new window around map position (9.4, -0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00493026 Jy ! Component: 100 - total flux cleaned = 0.00652286 Jy ! Component: 150 - total flux cleaned = 0.00710468 Jy ! Component: 200 - total flux cleaned = 0.00749861 Jy ! Total flux subtracted in 200 components = 0.00749861 Jy ! Clean residual min=-0.002682 max=0.003019 Jy/beam ! Clean residual mean=0.000014 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.0541716 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 50 components and 0.0541716 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.056358Jy sigma=0.835079 ! Fit after self-cal, rms=0.056140Jy sigma=0.832227 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9763 x 1.624 at 10.24 degrees (North through East) ! Clean map min=-0.0027708 max=0.036987 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.08 HN 0.93 KP 0.81 ! LA 0.85 MK 1.40 NL 1.22 OV 0.95 ! PT 1.04 SC 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 0.98 HN 1.20 KP 0.76 ! MK 1.16 NL 1.32 OV 1.02 PT 0.75 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.91 HN 1.10 KP 1.05 ! LA 0.78 MK 1.06 NL 1.32 OV 1.00 ! PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.84 HN 0.98 MK 1.15 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.04 HN 1.11 KP 0.92 ! LA 0.87 MK 1.25 NL 1.15 OV 0.90 ! PT 1.20 SC 1.11 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.15 FD 0.97 HN 1.24 KP 0.78 ! MK 1.25 NL 1.20 OV 0.98 PT 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.03 HN 1.27 KP 0.97 ! LA 0.80 MK 1.25 NL 1.18 OV 0.93 ! PT 1.19 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.91 FD 1.16 HN 0.71 MK 0.82 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 1.01 HN 1.14 KP 0.99 ! LA 0.85 MK 1.05 NL 1.26 OV 0.93 ! PT 1.07 SC 1.20 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.96 HN 1.27 KP 0.78 ! MK 1.21 NL 1.14 OV 0.95 PT 0.77 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.91 FD 0.99 HN 1.23 KP 0.96 ! LA 0.85 MK 1.31 NL 1.27 OV 1.06 ! PT 1.20 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.80 FD 0.81 HN 1.21 MK 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.96 HN 0.98 KP 0.97 ! LA 0.77 MK 1.14 NL 1.15 OV 1.01 ! PT 1.32 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.94 HN 1.19 KP 0.77 ! MK 1.26 NL 1.19 OV 0.98 PT 0.79 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 HN 1.52 KP 0.97 ! LA 0.90 MK 1.21 NL 1.35 OV 0.95 ! PT 1.05 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.68 FD 0.96 HN 1.12 MK 0.93 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.08 HN 0.91 KP 0.89 ! LA 1.02 MK 1.20 NL 1.30 OV 0.85 ! PT 1.21 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.95 HN 1.17 KP 0.81 ! MK 1.16 NL 1.21 OV 0.95 PT 0.86 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 FD 1.03 HN 1.20 KP 1.02 ! LA 0.95 MK 1.20 NL 1.24 OV 0.81 ! PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 FD 0.92 HN 0.78 MK 0.68 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.11 HN 1.06 KP 0.96 ! LA 1.01 MK 1.02 NL 1.18 OV 0.90 ! PT 1.02 SC 0.77 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 FD 1.05 HN 1.27 KP 0.83 ! MK 1.10 NL 1.16 OV 0.92 PT 0.88 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.98 HN 1.68 KP 1.01 ! LA 1.01 MK 1.33 NL 1.23 OV 0.98 ! PT 1.14 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.88 FD 0.91 HN 0.74 MK 0.95 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 0.97 HN 1.01 KP 1.16 ! LA 0.91 MK 1.20 NL 1.29 OV 0.83 ! PT 1.23 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 0.94 HN 1.10 KP 0.88 ! MK 1.08 NL 1.10 OV 0.98 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.97 HN 1.14 KP 0.95 ! LA 1.10 MK 1.16 NL 1.27 OV 0.88 ! PT 1.16 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 0.68 HN 0.91 MK 0.72 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.78 FD 1.00 HN 0.89 KP 1.08 ! LA 0.99 MK 1.11 NL 1.16 OV 0.95 ! PT 1.27 SC 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.93 HN 1.11 KP 0.91 ! MK 0.95 NL 1.10 OV 0.94 PT 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.10 FD 1.04 HN 1.28 KP 1.03 ! LA 1.00 MK 1.08 NL 1.09 OV 0.87 ! PT 1.14 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.82 FD 0.77 HN 0.97 MK 0.74 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 FD 0.95 HN 0.89 KP 1.04 ! LA 0.89 MK 0.92 NL 1.17 OV 0.93 ! PT 1.21 SC 0.87 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.95 HN 1.03 KP 0.89 ! MK 0.98 NL 1.08 OV 0.97 PT 0.90 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 0.93 HN 1.19 KP 1.09 ! LA 1.06 MK 1.18 NL 1.24 OV 1.00 ! PT 0.96 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.85 FD 0.81 HN 0.87 MK 0.75 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.93 HN 0.92 KP 1.00 ! LA 0.98 MK 0.90 NL 1.12 OV 0.90 ! PT 1.56 SC 0.86 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.97 HN 0.96 KP 0.87 ! MK 0.90 NL 1.04 OV 0.99 PT 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.93 FD 1.04 HN 0.92 KP 1.11 ! LA 0.94 MK 0.88 NL 1.10 OV 0.97 ! PT 1.16 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.89 FD 0.82 HN 0.92 MK 0.71 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.08 HN 0.84 KP 0.98 ! LA 0.93 MK 0.98 NL 1.08 OV 0.93 ! PT 1.22 SC 0.85 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.87 HN 0.96 KP 0.87 ! MK 0.89 NL 1.07 OV 0.99 PT 0.93 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.88 FD 1.02 HN 0.98 KP 1.02 ! LA 1.19 MK 0.97 NL 1.24 OV 0.89 ! PT 1.08 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.82 FD 0.73 HN 0.77 MK 0.76 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.91 FD 1.00 HN 0.89 KP 0.89 ! LA 1.01 MK 0.92 NL 1.10 OV 0.85 ! PT 1.17 SC 1.06 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.93 FD 0.88 HN 0.93 KP 0.92 ! MK 0.77 NL 1.00 OV 0.95 PT 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.92 FD 0.92 HN 1.03 KP 0.99 ! LA 1.21 MK 1.00 NL 1.08 OV 0.83 ! PT 1.17 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.83 FD 0.65 HN 0.85 MK 0.68 ! ! ! Fit before self-cal, rms=0.056140Jy sigma=0.832227 ! Fit after self-cal, rms=0.057919Jy sigma=0.824222 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9919 mas, bmaj=1.647 mas, bpa=11.49 degrees ! Estimated noise=0.208505 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190987 Jy ! Component: 100 - total flux cleaned = 0.00198675 Jy ! Component: 150 - total flux cleaned = 0.00182597 Jy ! Component: 200 - total flux cleaned = 0.00164501 Jy ! Total flux subtracted in 200 components = 0.00164501 Jy ! Clean residual min=-0.002625 max=0.002837 Jy/beam ! Clean residual mean=0.000019 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 0.0558166 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 69 components and 0.0558166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057764Jy sigma=0.821376 ! Fit after self-cal, rms=0.057851Jy sigma=0.818694 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.057851Jy sigma=0.818694 ! Fit after self-cal, rms=0.059205Jy sigma=0.817046 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9973 mas, bmaj=1.635 mas, bpa=11.27 degrees ! Estimated noise=0.208882 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0016228 Jy ! Component: 100 - total flux cleaned = 0.00154037 Jy ! Component: 150 - total flux cleaned = 0.00137783 Jy ! Component: 200 - total flux cleaned = 0.00124127 Jy ! Total flux subtracted in 200 components = 0.00124127 Jy ! Clean residual min=-0.002431 max=0.002786 Jy/beam ! Clean residual mean=0.000021 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0570579 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 79 components and 0.0570579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059123Jy sigma=0.815521 ! Fit after self-cal, rms=0.059111Jy sigma=0.814464 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000848829 Jy ! Component: 100 - total flux cleaned = 0.000739999 Jy ! Component: 150 - total flux cleaned = 0.000615114 Jy ! Component: 200 - total flux cleaned = 0.00053519 Jy ! Total flux subtracted in 200 components = 0.00053519 Jy ! Clean residual min=-0.002502 max=0.002771 Jy/beam ! Clean residual mean=0.000021 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.0575931 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 87 components and 0.0575931 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059069Jy sigma=0.813764 ! Fit after self-cal, rms=0.059042Jy sigma=0.813498 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059042Jy sigma=0.813498 ! Fit after self-cal, rms=0.060683Jy sigma=0.810642 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9932 mas, bmaj=1.63 mas, bpa=11.35 degrees ! Estimated noise=0.207756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526007 Jy ! Component: 100 - total flux cleaned = 0.000311899 Jy ! Component: 150 - total flux cleaned = 0.000180033 Jy ! Component: 200 - total flux cleaned = 0.000111944 Jy ! Total flux subtracted in 200 components = 0.000111944 Jy ! Clean residual min=-0.002391 max=0.002588 Jy/beam ! Clean residual mean=0.000023 rms=0.000656 Jy/beam ! Combined flux in latest and established models = 0.057705 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 95 components and 0.057705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060650Jy sigma=0.810148 ! Fit after self-cal, rms=0.060771Jy sigma=0.809337 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.12013e-05 Jy ! Component: 100 - total flux cleaned = -0.000187972 Jy ! Component: 150 - total flux cleaned = -0.000231819 Jy ! Component: 200 - total flux cleaned = -0.000251782 Jy ! Total flux subtracted in 200 components = -0.000251782 Jy ! Clean residual min=-0.002376 max=0.002616 Jy/beam ! Clean residual mean=0.000023 rms=0.000657 Jy/beam ! Combined flux in latest and established models = 0.0574532 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 99 components and 0.0574532 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060752Jy sigma=0.809039 ! Fit after self-cal, rms=0.060747Jy sigma=0.808955 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060747Jy sigma=0.808955 ! Fit after self-cal, rms=0.060949Jy sigma=0.808724 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.154 mas, bmaj=2.626 mas, bpa=19.15 degrees ! Estimated noise=0.245836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000693001 Jy ! Component: 100 - total flux cleaned = 0.000652743 Jy ! Component: 150 - total flux cleaned = 0.000686986 Jy ! Component: 200 - total flux cleaned = 0.000687573 Jy ! Total flux subtracted in 200 components = 0.000687573 Jy ! Clean residual min=-0.004166 max=0.004447 Jy/beam ! Clean residual mean=0.000046 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.0581408 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 111 components and 0.0581408 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060956Jy sigma=0.808476 ! Fit after self-cal, rms=0.060996Jy sigma=0.808189 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000136346 Jy ! Component: 100 - total flux cleaned = 4.36209e-05 Jy ! Component: 150 - total flux cleaned = -9.86479e-06 Jy ! Component: 200 - total flux cleaned = -3.41641e-05 Jy ! Total flux subtracted in 200 components = -3.41641e-05 Jy ! Clean residual min=-0.004111 max=0.004415 Jy/beam ! Clean residual mean=0.000046 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.0581066 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 120 components and 0.0581066 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.060999Jy sigma=0.808118 ! Fit after self-cal, rms=0.060981Jy sigma=0.807977 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=1.629 mas, bpa=11.45 degrees ! Estimated noise=0.206109 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 1.629 at 11.45 degrees (North through East) ! Clean map min=-0.0037267 max=0.035224 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.722 mas, bmaj=1.26 mas, bpa=9.664 degrees ! Estimated noise=0.478934 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.024568 Jy ! Component: 100 - total flux cleaned = 0.0334524 Jy ! Component: 150 - total flux cleaned = 0.0398414 Jy ! Component: 200 - total flux cleaned = 0.0444402 Jy ! Total flux subtracted in 200 components = 0.0444402 Jy ! Clean residual min=-0.002926 max=0.003207 Jy/beam ! Clean residual mean=0.000007 rms=0.000600 Jy/beam ! Combined flux in latest and established models = 0.0444402 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.0444402 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=1.629 mas, bpa=11.45 degrees ! Estimated noise=0.206109 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00551503 Jy ! Component: 100 - total flux cleaned = 0.00775336 Jy ! Component: 150 - total flux cleaned = 0.00843113 Jy ! Component: 200 - total flux cleaned = 0.00900023 Jy ! Total flux subtracted in 200 components = 0.00900023 Jy ! Clean residual min=-0.002784 max=0.003131 Jy/beam ! Clean residual mean=0.000032 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.0534404 Jy ! Adding 29 model components to the UV plane model. ! The established model now contains 39 components and 0.0534404 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.154 mas, bmaj=2.626 mas, bpa=19.15 degrees ! Estimated noise=0.245836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173698 Jy ! Component: 100 - total flux cleaned = 0.00298864 Jy ! Component: 150 - total flux cleaned = 0.00332381 Jy ! Component: 200 - total flux cleaned = 0.00351913 Jy ! Total flux subtracted in 200 components = 0.00351913 Jy ! Clean residual min=-0.004426 max=0.004736 Jy/beam ! Clean residual mean=0.000055 rms=0.001258 Jy/beam ! Combined flux in latest and established models = 0.0569595 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000113053 Jy ! Component: 100 - total flux cleaned = 0.00021068 Jy ! Component: 150 - total flux cleaned = 0.000296199 Jy ! Component: 200 - total flux cleaned = 0.00033535 Jy ! Total flux subtracted in 200 components = 0.00033535 Jy ! Clean residual min=-0.004260 max=0.004535 Jy/beam ! Clean residual mean=0.000050 rms=0.001217 Jy/beam ! Combined flux in latest and established models = 0.0572949 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 73 components and 0.0572949 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9883 mas, bmaj=1.629 mas, bpa=11.45 degrees ! Estimated noise=0.206109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 4.22035e-05 Jy ! Component: 100 - total flux cleaned = -0.000154252 Jy ! Component: 150 - total flux cleaned = -0.000328694 Jy ! Component: 200 - total flux cleaned = -0.000359311 Jy ! Total flux subtracted in 200 components = -0.000359311 Jy ! Clean residual min=-0.002437 max=0.002586 Jy/beam ! Clean residual mean=0.000023 rms=0.000639 Jy/beam ! Combined flux in latest and established models = 0.0569356 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 84 components and 0.0569356 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061016Jy sigma=0.808737 ! Fit after self-cal, rms=0.060980Jy sigma=0.808224 wmodel J1048+6008_X_map.mod ! Writing 84 model components to file: J1048+6008_X_map.mod wobs J1048+6008_X_uvs.fits ! Writing UV FITS file: J1048+6008_X_uvs.fits wwins J1048+6008_X_map.win ! wwins: Wrote 2 windows to J1048+6008_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999983 Jy ! Component: 100 - total flux cleaned = 0.00179573 Jy ! Component: 150 - total flux cleaned = 0.00233704 Jy ! Component: 200 - total flux cleaned = 0.00293261 Jy ! Component: 250 - total flux cleaned = 0.00350331 Jy ! Component: 300 - total flux cleaned = 0.00408883 Jy ! Component: 350 - total flux cleaned = 0.0046168 Jy ! Component: 400 - total flux cleaned = 0.00509218 Jy ! Component: 450 - total flux cleaned = 0.00551744 Jy ! Component: 500 - total flux cleaned = 0.00589673 Jy ! Component: 550 - total flux cleaned = 0.00623483 Jy ! Component: 600 - total flux cleaned = 0.00662232 Jy ! Component: 650 - total flux cleaned = 0.00691131 Jy ! Component: 700 - total flux cleaned = 0.00716473 Jy ! Component: 750 - total flux cleaned = 0.00754761 Jy ! Component: 800 - total flux cleaned = 0.00770749 Jy ! Component: 850 - total flux cleaned = 0.0079163 Jy ! Component: 900 - total flux cleaned = 0.00809527 Jy ! Component: 950 - total flux cleaned = 0.00831947 Jy ! Component: 1000 - total flux cleaned = 0.00846556 Jy ! Component: 1050 - total flux cleaned = 0.00863274 Jy ! Component: 1100 - total flux cleaned = 0.00872623 Jy ! Component: 1150 - total flux cleaned = 0.00888663 Jy ! Component: 1200 - total flux cleaned = 0.00895431 Jy ! Component: 1250 - total flux cleaned = 0.00908705 Jy ! Component: 1300 - total flux cleaned = 0.00926062 Jy ! Component: 1350 - total flux cleaned = 0.00930356 Jy ! Component: 1400 - total flux cleaned = 0.00940888 Jy ! Component: 1450 - total flux cleaned = 0.00951256 Jy ! Component: 1500 - total flux cleaned = 0.00961435 Jy ! Component: 1550 - total flux cleaned = 0.00973482 Jy ! Component: 1600 - total flux cleaned = 0.00985385 Jy ! Component: 1650 - total flux cleaned = 0.009971 Jy ! Component: 1700 - total flux cleaned = 0.0101054 Jy ! Component: 1750 - total flux cleaned = 0.0101994 Jy ! Component: 1800 - total flux cleaned = 0.0102744 Jy ! Component: 1850 - total flux cleaned = 0.0103298 Jy ! Component: 1900 - total flux cleaned = 0.0104569 Jy ! Component: 1950 - total flux cleaned = 0.0105643 Jy ! Component: 2000 - total flux cleaned = 0.0106348 Jy ! Component: 2050 - total flux cleaned = 0.0107219 Jy ! Component: 2100 - total flux cleaned = 0.0107908 Jy ! Component: 2150 - total flux cleaned = 0.0108762 Jy ! Component: 2200 - total flux cleaned = 0.0109272 Jy ! Component: 2250 - total flux cleaned = 0.0111101 Jy ! Component: 2300 - total flux cleaned = 0.0111596 Jy ! Component: 2350 - total flux cleaned = 0.0112734 Jy ! Component: 2400 - total flux cleaned = 0.0113695 Jy ! Component: 2450 - total flux cleaned = 0.011465 Jy ! Component: 2500 - total flux cleaned = 0.0115593 Jy ! Component: 2550 - total flux cleaned = 0.0117145 Jy ! Component: 2600 - total flux cleaned = 0.0117143 Jy ! Component: 2650 - total flux cleaned = 0.0118056 Jy ! Component: 2700 - total flux cleaned = 0.0118807 Jy ! Component: 2750 - total flux cleaned = 0.0118806 Jy ! Component: 2800 - total flux cleaned = 0.0119542 Jy ! Component: 2850 - total flux cleaned = 0.0120561 Jy ! Component: 2900 - total flux cleaned = 0.0120849 Jy ! Component: 2950 - total flux cleaned = 0.0121705 Jy ! Component: 3000 - total flux cleaned = 0.0121984 Jy ! Component: 3050 - total flux cleaned = 0.0122405 Jy ! Component: 3100 - total flux cleaned = 0.0123097 Jy ! Component: 3150 - total flux cleaned = 0.0123236 Jy ! Component: 3200 - total flux cleaned = 0.0124052 Jy ! Component: 3250 - total flux cleaned = 0.0124052 Jy ! Component: 3300 - total flux cleaned = 0.0124454 Jy ! Component: 3350 - total flux cleaned = 0.0125116 Jy ! Component: 3400 - total flux cleaned = 0.0125641 Jy ! Component: 3450 - total flux cleaned = 0.0125903 Jy ! Component: 3500 - total flux cleaned = 0.0126675 Jy ! Component: 3550 - total flux cleaned = 0.0126548 Jy ! Component: 3600 - total flux cleaned = 0.0127305 Jy ! Component: 3650 - total flux cleaned = 0.0127431 Jy ! Component: 3700 - total flux cleaned = 0.0128425 Jy ! Component: 3750 - total flux cleaned = 0.0129041 Jy ! Component: 3800 - total flux cleaned = 0.0129407 Jy ! Component: 3850 - total flux cleaned = 0.0129891 Jy ! Component: 3900 - total flux cleaned = 0.0130491 Jy ! Component: 3950 - total flux cleaned = 0.0130969 Jy ! Component: 4000 - total flux cleaned = 0.0131797 Jy ! Component: 4050 - total flux cleaned = 0.0132033 Jy ! Total flux subtracted in 4096 components = 0.0132151 Jy ! Clean residual min=-0.000682 max=0.000649 Jy/beam ! Clean residual mean=0.000005 rms=0.000219 Jy/beam ! Combined flux in latest and established models = 0.0701507 Jy keep ! Adding 404 model components to the UV plane model. ! The established model now contains 488 components and 0.0701506 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1048+6008_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9883 x 1.629 at 11.45 degrees (North through East) ! Clean map min=-0.0036482 max=0.034855 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1048+6008_X_map.fits wmodel /vlbi/bp222/maps//J1048+6008_X_map.mod ! Writing 488 model components to file: /vlbi/bp222/maps//J1048+6008_X_map.mod wobs /vlbi/bp222/maps//J1048+6008_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1048+6008_X_uvs.fits wwins /vlbi/bp222/maps//J1048+6008_X_map.win ! wwins: Wrote 3 windows to /vlbi/bp222/maps//J1048+6008_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0348551 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000218092 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.87713 1.87713 3.75427 7.50854 15.0171 30.0342 60.0683 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.034 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 159.818 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1048+6008_X_dfm.log closed on Thu Sep 27 11:02:40 2018