! Started logfile: /vlbi/bp222/maps//J1022+3041_X_dfm.log on Thu Sep 27 11:01:43 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J1022+3041_X_uva.fits ! Reading UV FITS file: /vlbi/bp222/maps//J1022+3041_X_uva.fits ! AN table 1: 92 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.980676 visibilities/baseline/integration-bin. ! Found source: J1022+3041 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 121 lines of history. ! ! Reading 38976 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1022+3041_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 5. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 6. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 7. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 8. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 9. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 10. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 11. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 12. ! A total of 8 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014730Jy sigma=16.256597 ! Fit after self-cal, rms=0.880689Jy sigma=13.957202 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6014 mas, bmaj=1.702 mas, bpa=-1.667 degrees ! Estimated noise=0.466365 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0874741 Jy ! Component: 100 - total flux cleaned = 0.116587 Jy ! Total flux subtracted in 100 components = 0.116587 Jy ! Clean residual min=-0.016352 max=0.042836 Jy/beam ! Clean residual mean=0.000006 rms=0.003265 Jy/beam ! Combined flux in latest and established models = 0.116587 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.116587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.122585Jy sigma=1.998374 ! Fit after self-cal, rms=0.121652Jy sigma=1.986478 ! Inverting map ! Added new window around map position (1.8, -3.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0386094 Jy ! Component: 100 - total flux cleaned = 0.0582455 Jy ! Total flux subtracted in 100 components = 0.0582455 Jy ! Clean residual min=-0.012503 max=0.033034 Jy/beam ! Clean residual mean=0.000004 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.174832 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 25 components and 0.174832 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.101764Jy sigma=1.634046 ! Fit after self-cal, rms=0.099346Jy sigma=1.597548 ! Inverting map ! Added new window around map position (2.6, -5.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.027832 Jy ! Component: 100 - total flux cleaned = 0.0441539 Jy ! Total flux subtracted in 100 components = 0.0441539 Jy ! Clean residual min=-0.008650 max=0.022430 Jy/beam ! Clean residual mean=0.000003 rms=0.001969 Jy/beam ! Combined flux in latest and established models = 0.218986 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 0.218986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.086537Jy sigma=1.372388 ! Fit after self-cal, rms=0.085456Jy sigma=1.360046 ! Inverting map ! Added new window around map position (4, -7.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.022519 Jy ! Component: 100 - total flux cleaned = 0.0359016 Jy ! Total flux subtracted in 100 components = 0.0359016 Jy ! Clean residual min=-0.007294 max=0.013341 Jy/beam ! Clean residual mean=0.000003 rms=0.001475 Jy/beam ! Combined flux in latest and established models = 0.254888 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 39 components and 0.254888 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.075187Jy sigma=1.176823 ! Fit after self-cal, rms=0.074375Jy sigma=1.164136 ! Inverting map ! Added new window around map position (3, -7.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0144124 Jy ! Component: 100 - total flux cleaned = 0.0243803 Jy ! Total flux subtracted in 100 components = 0.0243803 Jy ! Clean residual min=-0.005805 max=0.010138 Jy/beam ! Clean residual mean=0.000003 rms=0.001176 Jy/beam ! Combined flux in latest and established models = 0.279268 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 47 components and 0.279268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068968Jy sigma=1.067701 ! Fit after self-cal, rms=0.068622Jy sigma=1.062353 ! Inverting map ! Added new window around map position (0.8, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100959 Jy ! Component: 100 - total flux cleaned = 0.0176803 Jy ! Total flux subtracted in 100 components = 0.0176803 Jy ! Clean residual min=-0.004660 max=0.006000 Jy/beam ! Clean residual mean=0.000003 rms=0.000985 Jy/beam ! Combined flux in latest and established models = 0.296949 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 56 components and 0.296949 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065850Jy sigma=1.011923 ! Fit after self-cal, rms=0.065778Jy sigma=1.010970 ! Inverting map ! Added new window around map position (4.6, -7.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00703415 Jy ! Component: 100 - total flux cleaned = 0.0125297 Jy ! Total flux subtracted in 100 components = 0.0125297 Jy ! Clean residual min=-0.004071 max=0.005442 Jy/beam ! Clean residual mean=0.000002 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.309478 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 62 components and 0.309478 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064151Jy sigma=0.981180 ! Fit after self-cal, rms=0.064111Jy sigma=0.980665 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.765 mas, bmaj=1.913 mas, bpa=-1.296 degrees ! Estimated noise=0.22979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0107854 Jy ! Component: 100 - total flux cleaned = 0.0182171 Jy ! Component: 150 - total flux cleaned = 0.0238728 Jy ! Component: 200 - total flux cleaned = 0.0283262 Jy ! Total flux subtracted in 200 components = 0.0283262 Jy ! Clean residual min=-0.004372 max=0.006256 Jy/beam ! Clean residual mean=0.000006 rms=0.001193 Jy/beam ! Combined flux in latest and established models = 0.337804 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 91 components and 0.337804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.061878Jy sigma=0.938767 ! Fit after self-cal, rms=0.061744Jy sigma=0.936780 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.765 x 1.913 at -1.296 degrees (North through East) ! Clean map min=-0.0040308 max=0.10177 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.96 KP 0.99 ! LA 0.93 MK 1.02 NL 1.13 PT 0.92 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.93 HN 0.97 KP 1.00 ! LA 0.95 MK 1.03 NL 1.13 PT 0.92 ! SC 1.05 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.94 HN 0.97 KP 1.01 ! LA 0.94 MK 1.02 NL 1.12 PT 0.91 ! SC 1.02 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.94 HN 0.95 KP 1.00 ! LA 0.95 MK 1.02 NL 1.14 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.94 HN 0.97 KP 0.99 ! LA 0.96 MK 1.01 NL 1.13 PT 0.92 ! SC 1.00 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.96 HN 0.96 KP 1.01 ! LA 0.96 MK 1.05 NL 1.12 PT 0.92 ! SC 0.96 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.95 HN 0.97 KP 0.99 ! LA 0.96 MK 1.02 NL 1.13 PT 0.93 ! SC 0.99 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.92 HN 0.96 KP 1.02 ! LA 0.95 MK 1.02 NL 1.14 PT 0.92 ! SC 1.03 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 1.02 FD 0.97 HN 0.96 KP 0.99 ! LA 0.96 MK 0.99 NL 1.16 PT 0.94 ! SC 1.00 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.95 HN 0.97 KP 1.00 ! LA 0.95 MK 1.05 NL 1.15 PT 0.93 ! SC 1.03 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.97 HN 0.95 KP 1.03 ! LA 0.96 MK 0.99 NL 1.13 PT 0.93 ! SC 1.00 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.93 HN 0.96 KP 1.01 ! LA 0.96 MK 1.00 NL 1.16 PT 0.92 ! SC 1.00 ! ! ! Fit before self-cal, rms=0.061744Jy sigma=0.936780 ! Fit after self-cal, rms=0.059419Jy sigma=0.903911 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7712 mas, bmaj=1.931 mas, bpa=-1.324 degrees ! Estimated noise=0.227797 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (9.8, -15.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000685717 Jy ! Component: 100 - total flux cleaned = 0.00129293 Jy ! Component: 150 - total flux cleaned = 0.00129598 Jy ! Component: 200 - total flux cleaned = 0.00136984 Jy ! Total flux subtracted in 200 components = 0.00136984 Jy ! Clean residual min=-0.002552 max=0.002892 Jy/beam ! Clean residual mean=0.000001 rms=0.000412 Jy/beam ! Combined flux in latest and established models = 0.339174 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 104 components and 0.339174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.059140Jy sigma=0.898636 ! Fit after self-cal, rms=0.059119Jy sigma=0.898045 ! Inverting map ! Added new window around map position (-1.6, 2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000729133 Jy ! Component: 100 - total flux cleaned = 0.00112731 Jy ! Component: 150 - total flux cleaned = 0.0012679 Jy ! Component: 200 - total flux cleaned = 0.00126733 Jy ! Total flux subtracted in 200 components = 0.00126733 Jy ! Clean residual min=-0.002035 max=0.001927 Jy/beam ! Clean residual mean=0.000001 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.340442 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 116 components and 0.340442 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058938Jy sigma=0.894891 ! Fit after self-cal, rms=0.058922Jy sigma=0.894780 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058922Jy sigma=0.894780 ! Fit after self-cal, rms=0.058756Jy sigma=0.894013 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7705 mas, bmaj=1.93 mas, bpa=-1.397 degrees ! Estimated noise=0.227296 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000463642 Jy ! Component: 100 - total flux cleaned = 0.000756511 Jy ! Component: 150 - total flux cleaned = 0.000917092 Jy ! Component: 200 - total flux cleaned = 0.000916239 Jy ! Total flux subtracted in 200 components = 0.000916239 Jy ! Clean residual min=-0.001750 max=0.001812 Jy/beam ! Clean residual mean=0.000001 rms=0.000337 Jy/beam ! Combined flux in latest and established models = 0.341358 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 131 components and 0.341358 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058660Jy sigma=0.892365 ! Fit after self-cal, rms=0.058653Jy sigma=0.892301 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00015073 Jy ! Component: 100 - total flux cleaned = 0.000150609 Jy ! Component: 150 - total flux cleaned = 0.000197039 Jy ! Component: 200 - total flux cleaned = 0.000196931 Jy ! Total flux subtracted in 200 components = 0.000196931 Jy ! Clean residual min=-0.001668 max=0.001714 Jy/beam ! Clean residual mean=0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.341555 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 139 components and 0.341555 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058586Jy sigma=0.891191 ! Fit after self-cal, rms=0.058580Jy sigma=0.891156 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058580Jy sigma=0.891156 ! Fit after self-cal, rms=0.058601Jy sigma=0.889202 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7699 mas, bmaj=1.931 mas, bpa=-1.384 degrees ! Estimated noise=0.227125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00029587 Jy ! Component: 100 - total flux cleaned = 0.000475695 Jy ! Component: 150 - total flux cleaned = 0.00064268 Jy ! Component: 200 - total flux cleaned = 0.000761712 Jy ! Total flux subtracted in 200 components = 0.000761712 Jy ! Clean residual min=-0.001371 max=0.001649 Jy/beam ! Clean residual mean=0.000001 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.342316 Jy selfcal ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 147 components and 0.342316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058544Jy sigma=0.888257 ! Fit after self-cal, rms=0.058541Jy sigma=0.888199 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000465921 Jy ! Component: 100 - total flux cleaned = 0.000636635 Jy ! Component: 150 - total flux cleaned = 0.000755859 Jy ! Component: 200 - total flux cleaned = 0.000832014 Jy ! Total flux subtracted in 200 components = 0.000832014 Jy ! Clean residual min=-0.001274 max=0.001201 Jy/beam ! Clean residual mean=0.000001 rms=0.000277 Jy/beam ! Combined flux in latest and established models = 0.343148 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 160 components and 0.343148 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058479Jy sigma=0.887190 ! Fit after self-cal, rms=0.058476Jy sigma=0.887161 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058476Jy sigma=0.887161 ! Fit after self-cal, rms=0.058458Jy sigma=0.887123 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.612 mas, bpa=-7.073 degrees ! Estimated noise=0.306801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237334 Jy ! Component: 100 - total flux cleaned = 5.82871e-05 Jy ! Component: 150 - total flux cleaned = 0.0001065 Jy ! Component: 200 - total flux cleaned = 0.000151277 Jy ! Total flux subtracted in 200 components = 0.000151277 Jy ! Clean residual min=-0.001030 max=0.001040 Jy/beam ! Clean residual mean=0.000003 rms=0.000273 Jy/beam ! Combined flux in latest and established models = 0.3433 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 173 components and 0.3433 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058444Jy sigma=0.886807 ! Fit after self-cal, rms=0.058439Jy sigma=0.886755 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.8468e-05 Jy ! Component: 100 - total flux cleaned = -2.81324e-05 Jy ! Component: 150 - total flux cleaned = -7.92669e-06 Jy ! Component: 200 - total flux cleaned = 1.04962e-05 Jy ! Total flux subtracted in 200 components = 1.04962e-05 Jy ! Clean residual min=-0.000996 max=0.001016 Jy/beam ! Clean residual mean=0.000003 rms=0.000266 Jy/beam ! Combined flux in latest and established models = 0.34331 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 186 components and 0.34331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058428Jy sigma=0.886548 ! Fit after self-cal, rms=0.058425Jy sigma=0.886525 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.7695 mas, bmaj=1.932 mas, bpa=-1.419 degrees ! Estimated noise=0.227083 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7695 x 1.932 at -1.419 degrees (North through East) ! Clean map min=-0.0010713 max=0.097537 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6022 mas, bmaj=1.712 mas, bpa=-1.704 degrees ! Estimated noise=0.464405 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0967522 Jy ! Component: 100 - total flux cleaned = 0.144918 Jy ! Component: 150 - total flux cleaned = 0.178661 Jy ! Component: 200 - total flux cleaned = 0.203477 Jy ! Total flux subtracted in 200 components = 0.203477 Jy ! Clean residual min=-0.007090 max=0.014319 Jy/beam ! Clean residual mean=0.000005 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 0.203477 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.203477 Jy ! Inverting map and beam ! Estimated beam: bmin=0.7695 mas, bmaj=1.932 mas, bpa=-1.419 degrees ! Estimated noise=0.227083 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.033383 Jy ! Component: 100 - total flux cleaned = 0.0565769 Jy ! Component: 150 - total flux cleaned = 0.0738592 Jy ! Component: 200 - total flux cleaned = 0.0870759 Jy ! Total flux subtracted in 200 components = 0.0870759 Jy ! Clean residual min=-0.003779 max=0.008005 Jy/beam ! Clean residual mean=0.000007 rms=0.001468 Jy/beam ! Combined flux in latest and established models = 0.290552 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 61 components and 0.290552 Jy ! Inverting map ! Added new window around map position (2, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103098 Jy ! Component: 100 - total flux cleaned = 0.0183854 Jy ! Component: 150 - total flux cleaned = 0.024753 Jy ! Component: 200 - total flux cleaned = 0.0298612 Jy ! Total flux subtracted in 200 components = 0.0298612 Jy ! Clean residual min=-0.002124 max=0.003250 Jy/beam ! Clean residual mean=0.000003 rms=0.000663 Jy/beam ! Combined flux in latest and established models = 0.320414 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 99 components and 0.320413 Jy ! Inverting map ! Added new window around map position (4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00418265 Jy ! Component: 100 - total flux cleaned = 0.00759382 Jy ! Component: 150 - total flux cleaned = 0.0104132 Jy ! Component: 200 - total flux cleaned = 0.0127748 Jy ! Total flux subtracted in 200 components = 0.0127748 Jy ! Clean residual min=-0.001526 max=0.001749 Jy/beam ! Clean residual mean=0.000002 rms=0.000376 Jy/beam ! Combined flux in latest and established models = 0.333188 Jy ! Adding 58 model components to the UV plane model. ! The established model now contains 133 components and 0.333188 Jy ! Inverting map ! Added new window around map position (11.4, -19.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00205667 Jy ! Component: 100 - total flux cleaned = 0.00377225 Jy ! Component: 150 - total flux cleaned = 0.00503814 Jy ! Component: 200 - total flux cleaned = 0.00589748 Jy ! Total flux subtracted in 200 components = 0.00589748 Jy ! Clean residual min=-0.001248 max=0.001188 Jy/beam ! Clean residual mean=0.000001 rms=0.000284 Jy/beam ! Combined flux in latest and established models = 0.339086 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 153 components and 0.339086 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.026 mas, bmaj=2.612 mas, bpa=-7.073 degrees ! Estimated noise=0.306801 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182629 Jy ! Component: 100 - total flux cleaned = 0.00293404 Jy ! Component: 150 - total flux cleaned = 0.00344412 Jy ! Component: 200 - total flux cleaned = 0.00375523 Jy ! Total flux subtracted in 200 components = 0.00375523 Jy ! Clean residual min=-0.001008 max=0.001114 Jy/beam ! Clean residual mean=0.000003 rms=0.000279 Jy/beam ! Combined flux in latest and established models = 0.342841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 8.95894e-05 Jy ! Component: 100 - total flux cleaned = 0.000151273 Jy ! Component: 150 - total flux cleaned = 0.000171027 Jy ! Component: 200 - total flux cleaned = 0.000189071 Jy ! Total flux subtracted in 200 components = 0.000189071 Jy ! Clean residual min=-0.000984 max=0.001102 Jy/beam ! Clean residual mean=0.000003 rms=0.000268 Jy/beam ! Combined flux in latest and established models = 0.34303 Jy ! Adding 65 model components to the UV plane model. ! The established model now contains 211 components and 0.34303 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.7695 mas, bmaj=1.932 mas, bpa=-1.419 degrees ! Estimated noise=0.227083 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000588391 Jy ! Component: 100 - total flux cleaned = -0.000623714 Jy ! Component: 150 - total flux cleaned = -0.000724826 Jy ! Component: 200 - total flux cleaned = -0.000726108 Jy ! Total flux subtracted in 200 components = -0.000726108 Jy ! Clean residual min=-0.001042 max=0.001092 Jy/beam ! Clean residual mean=0.000001 rms=0.000238 Jy/beam ! Combined flux in latest and established models = 0.342304 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 231 components and 0.342304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.058319Jy sigma=0.884954 ! Fit after self-cal, rms=0.058264Jy sigma=0.884273 wmodel J1022+3041_X_map.mod ! Writing 231 model components to file: J1022+3041_X_map.mod wobs J1022+3041_X_uvs.fits ! Writing UV FITS file: J1022+3041_X_uvs.fits wwins J1022+3041_X_map.win ! wwins: Wrote 13 windows to J1022+3041_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000198534 Jy ! Component: 100 - total flux cleaned = 0.000198512 Jy ! Component: 150 - total flux cleaned = 0.000198889 Jy ! Component: 200 - total flux cleaned = 0.000182876 Jy ! Component: 250 - total flux cleaned = 0.00018247 Jy ! Component: 300 - total flux cleaned = 5.93394e-05 Jy ! Component: 350 - total flux cleaned = -3.08914e-05 Jy ! Component: 400 - total flux cleaned = -0.000149096 Jy ! Component: 450 - total flux cleaned = -0.000236339 Jy ! Component: 500 - total flux cleaned = -0.000293817 Jy ! Component: 550 - total flux cleaned = -0.000364249 Jy ! Component: 600 - total flux cleaned = -0.00044765 Jy ! Component: 650 - total flux cleaned = -0.000475116 Jy ! Component: 700 - total flux cleaned = -0.000556319 Jy ! Component: 750 - total flux cleaned = -0.000622626 Jy ! Component: 800 - total flux cleaned = -0.000622509 Jy ! Component: 850 - total flux cleaned = -0.000622729 Jy ! Component: 900 - total flux cleaned = -0.00070006 Jy ! Component: 950 - total flux cleaned = -0.000751001 Jy ! Component: 1000 - total flux cleaned = -0.00077613 Jy ! Component: 1050 - total flux cleaned = -0.000801127 Jy ! Component: 1100 - total flux cleaned = -0.000900016 Jy ! Component: 1150 - total flux cleaned = -0.00094904 Jy ! Component: 1200 - total flux cleaned = -0.00100964 Jy ! Component: 1250 - total flux cleaned = -0.00106976 Jy ! Component: 1300 - total flux cleaned = -0.001153 Jy ! Component: 1350 - total flux cleaned = -0.00116482 Jy ! Component: 1400 - total flux cleaned = -0.00127011 Jy ! Component: 1450 - total flux cleaned = -0.00132799 Jy ! Component: 1500 - total flux cleaned = -0.00136241 Jy ! Component: 1550 - total flux cleaned = -0.00140819 Jy ! Component: 1600 - total flux cleaned = -0.0014987 Jy ! Component: 1650 - total flux cleaned = -0.001566 Jy ! Component: 1700 - total flux cleaned = -0.00162152 Jy ! Component: 1750 - total flux cleaned = -0.00169889 Jy ! Component: 1800 - total flux cleaned = -0.00176451 Jy ! Component: 1850 - total flux cleaned = -0.0017645 Jy ! Component: 1900 - total flux cleaned = -0.00184015 Jy ! Component: 1950 - total flux cleaned = -0.00191532 Jy ! Component: 2000 - total flux cleaned = -0.00194722 Jy ! Component: 2050 - total flux cleaned = -0.00207413 Jy ! Component: 2100 - total flux cleaned = -0.00206373 Jy ! Component: 2150 - total flux cleaned = -0.00220965 Jy ! Component: 2200 - total flux cleaned = -0.00224066 Jy ! Component: 2250 - total flux cleaned = -0.00233323 Jy ! Component: 2300 - total flux cleaned = -0.00241479 Jy ! Component: 2350 - total flux cleaned = -0.00245532 Jy ! Component: 2400 - total flux cleaned = -0.00248553 Jy ! Component: 2450 - total flux cleaned = -0.00253579 Jy ! Component: 2500 - total flux cleaned = -0.00261541 Jy ! Component: 2550 - total flux cleaned = -0.00264509 Jy ! Component: 2600 - total flux cleaned = -0.00267463 Jy ! Component: 2650 - total flux cleaned = -0.00275276 Jy ! Component: 2700 - total flux cleaned = -0.0027527 Jy ! Component: 2750 - total flux cleaned = -0.00276224 Jy ! Component: 2800 - total flux cleaned = -0.00285812 Jy ! Component: 2850 - total flux cleaned = -0.00285809 Jy ! Component: 2900 - total flux cleaned = -0.00285814 Jy ! Component: 2950 - total flux cleaned = -0.00288647 Jy ! Component: 3000 - total flux cleaned = -0.00286772 Jy ! Component: 3050 - total flux cleaned = -0.00294266 Jy ! Component: 3100 - total flux cleaned = -0.00295192 Jy ! Component: 3150 - total flux cleaned = -0.00303509 Jy ! Component: 3200 - total flux cleaned = -0.0030443 Jy ! Component: 3250 - total flux cleaned = -0.0030077 Jy ! Component: 3300 - total flux cleaned = -0.00305315 Jy ! Component: 3350 - total flux cleaned = -0.00306228 Jy ! Component: 3400 - total flux cleaned = -0.00308924 Jy ! Component: 3450 - total flux cleaned = -0.00310716 Jy ! Component: 3500 - total flux cleaned = -0.00309825 Jy ! Component: 3550 - total flux cleaned = -0.00311603 Jy ! Component: 3600 - total flux cleaned = -0.00309835 Jy ! Component: 3650 - total flux cleaned = -0.00311601 Jy ! Component: 3700 - total flux cleaned = -0.00311599 Jy ! Component: 3750 - total flux cleaned = -0.00311596 Jy ! Component: 3800 - total flux cleaned = -0.00311596 Jy ! Component: 3850 - total flux cleaned = -0.00310731 Jy ! Component: 3900 - total flux cleaned = -0.00317604 Jy ! Component: 3950 - total flux cleaned = -0.00318451 Jy ! Component: 4000 - total flux cleaned = -0.00313354 Jy ! Component: 4050 - total flux cleaned = -0.00316732 Jy ! Total flux subtracted in 4096 components = -0.00317572 Jy ! Clean residual min=-0.000501 max=0.000528 Jy/beam ! Clean residual mean=0.000000 rms=0.000147 Jy/beam ! Combined flux in latest and established models = 0.339128 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 572 components and 0.339128 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J1022+3041_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7695 x 1.932 at -1.419 degrees (North through East) ! Clean map min=-0.00076963 max=0.096014 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J1022+3041_X_map.fits wmodel /vlbi/bp222/maps//J1022+3041_X_map.mod ! Writing 572 model components to file: /vlbi/bp222/maps//J1022+3041_X_map.mod wobs /vlbi/bp222/maps//J1022+3041_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J1022+3041_X_uvs.fits wwins /vlbi/bp222/maps//J1022+3041_X_map.win ! wwins: Wrote 14 windows to /vlbi/bp222/maps//J1022+3041_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0960144 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000146983 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.459253 0.459253 0.918507 1.83701 3.67403 7.34805 14.6961 29.3922 58.7844 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.096 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 653.234 quit ! Quitting program ! Log file /vlbi/bp222/maps//J1022+3041_X_dfm.log closed on Thu Sep 27 11:01:50 2018