! Started logfile: /vlbi/bp222/maps//J0900-2808_X_dfm.log on Thu Sep 27 10:57:52 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0900-2808_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0900-2808_X_uvm.fits ! AN table 1: 23 integrations on 45 of 45 possible baselines. ! AN table 2: 68 integrations on 28 of 28 possible baselines. ! AN table 3: 22 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.922606 visibilities/baseline/integration-bin. ! Found source: J0900-2808 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 36192 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0900-2808_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 5. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 6. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 7. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 8. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 9. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 10. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 11. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 12. ! A total of 5 telescope corrections were flagged in sub-array 1. ! A total of 30 telescope corrections were flagged in sub-array 2. ! A total of 2 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.155115Jy sigma=14.447069 ! Fit after self-cal, rms=0.603724Jy sigma=6.256095 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6808 mas, bmaj=2.437 mas, bpa=-10.74 degrees ! Estimated noise=0.730378 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316121 Jy ! Component: 100 - total flux cleaned = 0.464591 Jy ! Total flux subtracted in 100 components = 0.464591 Jy ! Clean residual min=-0.028570 max=0.109840 Jy/beam ! Clean residual mean=-0.000340 rms=0.009698 Jy/beam ! Combined flux in latest and established models = 0.464591 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.464591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.267606Jy sigma=3.569668 ! Fit after self-cal, rms=0.267112Jy sigma=3.566640 ! Inverting map ! Added new window around map position (-1.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109472 Jy ! Component: 100 - total flux cleaned = 0.179703 Jy ! Total flux subtracted in 100 components = 0.179703 Jy ! Clean residual min=-0.019986 max=0.056507 Jy/beam ! Clean residual mean=-0.000206 rms=0.006107 Jy/beam ! Combined flux in latest and established models = 0.644294 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 28 components and 0.644294 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.181813Jy sigma=2.316383 ! Fit after self-cal, rms=0.178600Jy sigma=2.284439 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0541715 Jy ! Component: 100 - total flux cleaned = 0.0916304 Jy ! Total flux subtracted in 100 components = 0.0916304 Jy ! Clean residual min=-0.016854 max=0.040550 Jy/beam ! Clean residual mean=-0.000138 rms=0.004618 Jy/beam ! Combined flux in latest and established models = 0.735924 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 50 components and 0.735924 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.146355Jy sigma=1.772397 ! Fit after self-cal, rms=0.145440Jy sigma=1.754233 ! Inverting map ! Added new window around map position (1.2, -1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0405256 Jy ! Component: 100 - total flux cleaned = 0.0708044 Jy ! Total flux subtracted in 100 components = 0.0708044 Jy ! Clean residual min=-0.014153 max=0.020807 Jy/beam ! Clean residual mean=-0.000086 rms=0.003594 Jy/beam ! Combined flux in latest and established models = 0.806728 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 74 components and 0.806728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.123448Jy sigma=1.416668 ! Fit after self-cal, rms=0.122937Jy sigma=1.414265 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9419 mas, bmaj=3.112 mas, bpa=-9.459 degrees ! Estimated noise=0.331088 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0460744 Jy ! Component: 100 - total flux cleaned = 0.0766279 Jy ! Component: 150 - total flux cleaned = 0.0978286 Jy ! Component: 200 - total flux cleaned = 0.112744 Jy ! Total flux subtracted in 200 components = 0.112744 Jy ! Clean residual min=-0.012244 max=0.020350 Jy/beam ! Clean residual mean=-0.000023 rms=0.003604 Jy/beam ! Combined flux in latest and established models = 0.919472 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 103 components and 0.919472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.104289Jy sigma=1.084275 ! Fit after self-cal, rms=0.103556Jy sigma=1.078291 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9419 x 3.112 at -9.459 degrees (North through East) ! Clean map min=-0.011905 max=0.40483 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.10 KP 0.91 ! LA 0.97 MK 1.08 NL 0.92 OV 0.95 ! PT 0.93 SC 1.05 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 1.78 KP 1.00 ! MK 0.99 NL 1.00 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.39 LA 0.99 NL 1.27 ! OV 0.93 PT 1.20 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.05 KP 0.91 ! LA 0.97 MK 1.12 NL 0.93 OV 0.95 ! PT 0.92 SC 1.03 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 1.72 KP 1.01 ! MK 0.99 NL 1.00 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.27 LA 1.00 NL 1.28 ! OV 0.93 PT 1.21 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.08 KP 0.91 ! LA 0.96 MK 1.06 NL 0.93 OV 0.96 ! PT 0.93 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.68 KP 1.01 ! MK 1.00 NL 1.00 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 1.37 LA 0.99 NL 1.28 ! OV 0.95 PT 1.21 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.94 HN 1.08 KP 0.92 ! LA 0.97 MK 1.08 NL 0.93 OV 0.95 ! PT 0.93 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.00 HN 1.72 KP 0.99 ! MK 0.99 NL 1.00 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 1.32 LA 0.98 NL 1.34 ! OV 0.95 PT 1.19 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.05 KP 0.91 ! LA 0.97 MK 1.09 NL 0.93 OV 0.95 ! PT 0.92 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 1.56 KP 1.01 ! MK 0.97 NL 1.01 OV 1.00 PT 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.34 LA 1.01 NL 1.27 ! OV 0.95 PT 1.22 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.95 HN 1.11 KP 0.92 ! LA 0.96 MK 1.06 NL 0.92 OV 0.95 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.69 KP 1.00 ! MK 0.98 NL 1.00 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.99 HN 1.32 LA 1.00 NL 1.31 ! OV 0.96 PT 1.23 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.94 HN 1.07 KP 0.93 ! LA 0.97 MK 1.07 NL 0.93 OV 0.96 ! PT 0.93 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.62 KP 1.01 ! MK 0.95 NL 0.99 OV 0.99 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.98 HN 1.25 LA 1.00 NL 1.32 ! OV 0.96 PT 1.24 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.12 KP 0.91 ! LA 0.97 MK 1.07 NL 0.94 OV 0.96 ! PT 0.92 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 1.66 KP 1.00 ! MK 0.97 NL 0.99 OV 0.99 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.97 HN 1.25 LA 0.99 NL 1.34 ! OV 0.95 PT 1.23 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.11 KP 0.92 ! LA 0.97 MK 1.09 NL 0.93 OV 0.96 ! PT 0.93 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.63 KP 1.01 ! MK 0.95 NL 0.98 OV 1.00 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.37 LA 0.99 NL 1.35 ! OV 0.96 PT 1.25 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.05 KP 0.92 ! LA 0.99 MK 1.07 NL 0.93 OV 0.95 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.98 HN 1.61 KP 1.00 ! MK 0.95 NL 0.99 OV 1.00 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.12 LA 1.01 NL 1.32 ! OV 0.95 PT 1.24 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.04 KP 0.93 ! LA 0.97 MK 1.04 NL 0.96 OV 0.95 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 0.99 HN 1.60 KP 1.01 ! MK 0.94 NL 1.00 OV 0.99 PT 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.17 LA 1.00 NL 1.30 ! OV 0.96 PT 1.23 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.96 HN 1.07 KP 0.92 ! LA 0.98 MK 1.08 NL 0.95 OV 0.97 ! PT 0.93 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 1.55 KP 1.02 ! MK 0.96 NL 1.01 OV 0.99 PT 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.00 HN 1.31 LA 0.99 NL 1.34 ! OV 0.97 PT 1.21 ! ! ! Fit before self-cal, rms=0.103556Jy sigma=1.078291 ! Fit after self-cal, rms=0.100258Jy sigma=0.833512 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9566 mas, bmaj=3.09 mas, bpa=-9.469 degrees ! Estimated noise=0.335371 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.6, -1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00906356 Jy ! Component: 100 - total flux cleaned = 0.0104732 Jy ! Component: 150 - total flux cleaned = 0.0124512 Jy ! Component: 200 - total flux cleaned = 0.0138374 Jy ! Total flux subtracted in 200 components = 0.0138374 Jy ! Clean residual min=-0.005891 max=0.005424 Jy/beam ! Clean residual mean=0.000001 rms=0.001189 Jy/beam ! Combined flux in latest and established models = 0.93331 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 133 components and 0.933309 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098336Jy sigma=0.803216 ! Fit after self-cal, rms=0.098742Jy sigma=0.801024 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098742Jy sigma=0.801024 ! Fit after self-cal, rms=0.099696Jy sigma=0.794811 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9566 mas, bmaj=3.083 mas, bpa=-9.461 degrees ! Estimated noise=0.33527 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00195354 Jy ! Component: 100 - total flux cleaned = 0.00293014 Jy ! Component: 150 - total flux cleaned = 0.00331585 Jy ! Component: 200 - total flux cleaned = 0.00364615 Jy ! Total flux subtracted in 200 components = 0.00364615 Jy ! Clean residual min=-0.004737 max=0.004432 Jy/beam ! Clean residual mean=-0.000007 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.936956 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 148 components and 0.936956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099227Jy sigma=0.787890 ! Fit after self-cal, rms=0.099189Jy sigma=0.787323 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000656839 Jy ! Component: 100 - total flux cleaned = 0.00125528 Jy ! Component: 150 - total flux cleaned = 0.00151493 Jy ! Component: 200 - total flux cleaned = 0.00151248 Jy ! Total flux subtracted in 200 components = 0.00151248 Jy ! Clean residual min=-0.004564 max=0.004171 Jy/beam ! Clean residual mean=-0.000005 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.938468 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 161 components and 0.938468 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098992Jy sigma=0.784780 ! Fit after self-cal, rms=0.098965Jy sigma=0.784566 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098965Jy sigma=0.784566 ! Fit after self-cal, rms=0.099654Jy sigma=0.773606 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9557 mas, bmaj=3.085 mas, bpa=-9.469 degrees ! Estimated noise=0.335056 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67701e-05 Jy ! Component: 100 - total flux cleaned = 0.000206497 Jy ! Component: 150 - total flux cleaned = 0.000441503 Jy ! Component: 200 - total flux cleaned = 0.000511505 Jy ! Total flux subtracted in 200 components = 0.000511505 Jy ! Clean residual min=-0.003786 max=0.003134 Jy/beam ! Clean residual mean=0.000000 rms=0.000667 Jy/beam ! Combined flux in latest and established models = 0.93898 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 166 components and 0.93898 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099489Jy sigma=0.771652 ! Fit after self-cal, rms=0.099446Jy sigma=0.771483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0002388 Jy ! Component: 100 - total flux cleaned = 0.000368866 Jy ! Component: 150 - total flux cleaned = 0.000494628 Jy ! Component: 200 - total flux cleaned = 0.000554555 Jy ! Total flux subtracted in 200 components = 0.000554555 Jy ! Clean residual min=-0.003693 max=0.003031 Jy/beam ! Clean residual mean=0.000001 rms=0.000645 Jy/beam ! Combined flux in latest and established models = 0.939534 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 169 components and 0.939534 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099341Jy sigma=0.770402 ! Fit after self-cal, rms=0.099316Jy sigma=0.770305 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099316Jy sigma=0.770305 ! Fit after self-cal, rms=0.099945Jy sigma=0.770146 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=6.252 mas, bpa=2.039 degrees ! Estimated noise=0.372843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000620431 Jy ! Component: 100 - total flux cleaned = 0.00044801 Jy ! Component: 150 - total flux cleaned = 0.000496426 Jy ! Component: 200 - total flux cleaned = 0.000467459 Jy ! Total flux subtracted in 200 components = 0.000467459 Jy ! Clean residual min=-0.002502 max=0.002382 Jy/beam ! Clean residual mean=0.000001 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 0.940002 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 182 components and 0.940002 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099917Jy sigma=0.769659 ! Fit after self-cal, rms=0.099896Jy sigma=0.769474 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000310933 Jy ! Component: 100 - total flux cleaned = 0.000391337 Jy ! Component: 150 - total flux cleaned = 0.00039016 Jy ! Component: 200 - total flux cleaned = 0.000331973 Jy ! Total flux subtracted in 200 components = 0.000331973 Jy ! Clean residual min=-0.002403 max=0.002294 Jy/beam ! Clean residual mean=0.000001 rms=0.000599 Jy/beam ! Combined flux in latest and established models = 0.940334 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 188 components and 0.940334 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099881Jy sigma=0.769460 ! Fit after self-cal, rms=0.099840Jy sigma=0.769328 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=3.09 mas, bpa=-9.485 degrees ! Estimated noise=0.335518 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9567 x 3.09 at -9.485 degrees (North through East) ! Clean map min=-0.0056769 max=0.40686 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6895 mas, bmaj=2.389 mas, bpa=-10.66 degrees ! Estimated noise=0.753131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.323569 Jy ! Component: 100 - total flux cleaned = 0.48226 Jy ! Component: 150 - total flux cleaned = 0.582575 Jy ! Component: 200 - total flux cleaned = 0.651382 Jy ! Total flux subtracted in 200 components = 0.651382 Jy ! Clean residual min=-0.016837 max=0.039724 Jy/beam ! Clean residual mean=-0.000207 rms=0.005137 Jy/beam ! Combined flux in latest and established models = 0.651382 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 40 model components to the UV plane model. ! The established model now contains 40 components and 0.651382 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=3.09 mas, bpa=-9.485 degrees ! Estimated noise=0.335518 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0929546 Jy ! Component: 100 - total flux cleaned = 0.149504 Jy ! Component: 150 - total flux cleaned = 0.18731 Jy ! Component: 200 - total flux cleaned = 0.21348 Jy ! Total flux subtracted in 200 components = 0.21348 Jy ! Clean residual min=-0.007978 max=0.016199 Jy/beam ! Clean residual mean=-0.000090 rms=0.002570 Jy/beam ! Combined flux in latest and established models = 0.864862 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 110 components and 0.864862 Jy ! Inverting map ! Added new window around map position (0.4, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0189948 Jy ! Component: 100 - total flux cleaned = 0.0327249 Jy ! Component: 150 - total flux cleaned = 0.0429056 Jy ! Component: 200 - total flux cleaned = 0.050612 Jy ! Total flux subtracted in 200 components = 0.050612 Jy ! Clean residual min=-0.003827 max=0.007384 Jy/beam ! Clean residual mean=-0.000029 rms=0.001014 Jy/beam ! Combined flux in latest and established models = 0.915474 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 155 components and 0.915474 Jy ! Inverting map ! Added new window around map position (0.4, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00697996 Jy ! Component: 100 - total flux cleaned = 0.0118543 Jy ! Component: 150 - total flux cleaned = 0.0155463 Jy ! Component: 200 - total flux cleaned = 0.0173573 Jy ! Total flux subtracted in 200 components = 0.0173573 Jy ! Clean residual min=-0.002954 max=0.003376 Jy/beam ! Clean residual mean=-0.000011 rms=0.000668 Jy/beam ! Combined flux in latest and established models = 0.932831 Jy ! Adding 32 model components to the UV plane model. ! The established model now contains 178 components and 0.932831 Jy ! Inverting map ! Added new window around map position (6.6, -19.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026013 Jy ! Component: 100 - total flux cleaned = 0.00353276 Jy ! Component: 150 - total flux cleaned = 0.00409851 Jy ! Component: 200 - total flux cleaned = 0.00453712 Jy ! Total flux subtracted in 200 components = 0.00453712 Jy ! Clean residual min=-0.002728 max=0.002848 Jy/beam ! Clean residual mean=-0.000008 rms=0.000607 Jy/beam ! Combined flux in latest and established models = 0.937369 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 192 components and 0.937368 Jy ! Inverting map ! Added new window around map position (-4, 30.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00182376 Jy ! Component: 100 - total flux cleaned = 0.00222422 Jy ! Component: 150 - total flux cleaned = 0.00245147 Jy ! Component: 200 - total flux cleaned = 0.00267162 Jy ! Total flux subtracted in 200 components = 0.00267162 Jy ! Clean residual min=-0.002630 max=0.002625 Jy/beam ! Clean residual mean=-0.000005 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 0.94004 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 204 components and 0.94004 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.315 mas, bmaj=6.252 mas, bpa=2.039 degrees ! Estimated noise=0.372843 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00174324 Jy ! Component: 100 - total flux cleaned = 0.00211459 Jy ! Component: 150 - total flux cleaned = 0.00220479 Jy ! Component: 200 - total flux cleaned = 0.00212381 Jy ! Total flux subtracted in 200 components = 0.00212381 Jy ! Clean residual min=-0.002381 max=0.002185 Jy/beam ! Clean residual mean=-0.000002 rms=0.000562 Jy/beam ! Combined flux in latest and established models = 0.942164 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -7.29619e-05 Jy ! Component: 100 - total flux cleaned = -0.000106877 Jy ! Component: 150 - total flux cleaned = -0.000201619 Jy ! Component: 200 - total flux cleaned = -0.00023207 Jy ! Total flux subtracted in 200 components = -0.00023207 Jy ! Clean residual min=-0.002285 max=0.002183 Jy/beam ! Clean residual mean=0.000000 rms=0.000556 Jy/beam ! Combined flux in latest and established models = 0.941932 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 235 components and 0.941932 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9567 mas, bmaj=3.09 mas, bpa=-9.485 degrees ! Estimated noise=0.335518 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000429469 Jy ! Component: 100 - total flux cleaned = -0.000295258 Jy ! Component: 150 - total flux cleaned = -0.000232448 Jy ! Component: 200 - total flux cleaned = -0.00017506 Jy ! Total flux subtracted in 200 components = -0.00017506 Jy ! Clean residual min=-0.002450 max=0.002265 Jy/beam ! Clean residual mean=-0.000001 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.941757 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 245 components and 0.941757 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.099505Jy sigma=0.765266 ! Fit after self-cal, rms=0.099335Jy sigma=0.764696 wmodel J0900-2808_X_map.mod ! Writing 245 model components to file: J0900-2808_X_map.mod wobs J0900-2808_X_uvs.fits ! Writing UV FITS file: J0900-2808_X_uvs.fits wwins J0900-2808_X_map.win ! wwins: Wrote 8 windows to J0900-2808_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000482326 Jy ! Component: 100 - total flux cleaned = -0.000645224 Jy ! Component: 150 - total flux cleaned = -0.000762334 Jy ! Component: 200 - total flux cleaned = -0.000799068 Jy ! Component: 250 - total flux cleaned = -0.000907883 Jy ! Component: 300 - total flux cleaned = -0.00101344 Jy ! Component: 350 - total flux cleaned = -0.0011165 Jy ! Component: 400 - total flux cleaned = -0.00118309 Jy ! Component: 450 - total flux cleaned = -0.00118313 Jy ! Component: 500 - total flux cleaned = -0.00128074 Jy ! Component: 550 - total flux cleaned = -0.00131204 Jy ! Component: 600 - total flux cleaned = -0.00143636 Jy ! Component: 650 - total flux cleaned = -0.00143578 Jy ! Component: 700 - total flux cleaned = -0.00143537 Jy ! Component: 750 - total flux cleaned = -0.00149494 Jy ! Component: 800 - total flux cleaned = -0.00140654 Jy ! Component: 850 - total flux cleaned = -0.00137714 Jy ! Component: 900 - total flux cleaned = -0.00134859 Jy ! Component: 950 - total flux cleaned = -0.0013201 Jy ! Component: 1000 - total flux cleaned = -0.00123596 Jy ! Component: 1050 - total flux cleaned = -0.00126406 Jy ! Component: 1100 - total flux cleaned = -0.00126445 Jy ! Component: 1150 - total flux cleaned = -0.00131853 Jy ! Component: 1200 - total flux cleaned = -0.00123803 Jy ! Component: 1250 - total flux cleaned = -0.00115873 Jy ! Component: 1300 - total flux cleaned = -0.00115903 Jy ! Component: 1350 - total flux cleaned = -0.00113299 Jy ! Component: 1400 - total flux cleaned = -0.00113319 Jy ! Component: 1450 - total flux cleaned = -0.00108223 Jy ! Component: 1500 - total flux cleaned = -0.00108222 Jy ! Component: 1550 - total flux cleaned = -0.000907233 Jy ! Component: 1600 - total flux cleaned = -0.000957116 Jy ! Component: 1650 - total flux cleaned = -0.000957074 Jy ! Component: 1700 - total flux cleaned = -0.000859236 Jy ! Component: 1750 - total flux cleaned = -0.000835332 Jy ! Component: 1800 - total flux cleaned = -0.000882887 Jy ! Component: 1850 - total flux cleaned = -0.000763925 Jy ! Component: 1900 - total flux cleaned = -0.000717005 Jy ! Component: 1950 - total flux cleaned = -0.000716739 Jy ! Component: 2000 - total flux cleaned = -0.000624031 Jy ! Component: 2050 - total flux cleaned = -0.000647165 Jy ! Component: 2100 - total flux cleaned = -0.000624343 Jy ! Component: 2150 - total flux cleaned = -0.000556518 Jy ! Component: 2200 - total flux cleaned = -0.000556509 Jy ! Component: 2250 - total flux cleaned = -0.000489466 Jy ! Component: 2300 - total flux cleaned = -0.000445071 Jy ! Component: 2350 - total flux cleaned = -0.000467212 Jy ! Component: 2400 - total flux cleaned = -0.000379491 Jy ! Component: 2450 - total flux cleaned = -0.000270906 Jy ! Component: 2500 - total flux cleaned = -0.000249523 Jy ! Component: 2550 - total flux cleaned = -0.000206694 Jy ! Component: 2600 - total flux cleaned = -0.000185241 Jy ! Component: 2650 - total flux cleaned = -0.000142709 Jy ! Component: 2700 - total flux cleaned = -1.66122e-05 Jy ! Component: 2750 - total flux cleaned = 4.1818e-06 Jy ! Component: 2800 - total flux cleaned = 2.50593e-05 Jy ! Component: 2850 - total flux cleaned = 8.6884e-05 Jy ! Component: 2900 - total flux cleaned = 0.000148386 Jy ! Component: 2950 - total flux cleaned = 0.000168859 Jy ! Component: 3000 - total flux cleaned = 0.000189016 Jy ! Component: 3050 - total flux cleaned = 0.00024939 Jy ! Component: 3100 - total flux cleaned = 0.000249556 Jy ! Component: 3150 - total flux cleaned = 0.000309383 Jy ! Component: 3200 - total flux cleaned = 0.000388747 Jy ! Component: 3250 - total flux cleaned = 0.00040844 Jy ! Component: 3300 - total flux cleaned = 0.000447818 Jy ! Component: 3350 - total flux cleaned = 0.000506105 Jy ! Component: 3400 - total flux cleaned = 0.000544573 Jy ! Component: 3450 - total flux cleaned = 0.000621445 Jy ! Component: 3500 - total flux cleaned = 0.000678747 Jy ! Component: 3550 - total flux cleaned = 0.000735947 Jy ! Component: 3600 - total flux cleaned = 0.000849379 Jy ! Component: 3650 - total flux cleaned = 0.000830637 Jy ! Component: 3700 - total flux cleaned = 0.000886698 Jy ! Component: 3750 - total flux cleaned = 0.000905322 Jy ! Component: 3800 - total flux cleaned = 0.00101667 Jy ! Component: 3850 - total flux cleaned = 0.00103516 Jy ! Component: 3900 - total flux cleaned = 0.00110835 Jy ! Component: 3950 - total flux cleaned = 0.00118137 Jy ! Component: 4000 - total flux cleaned = 0.00129006 Jy ! Component: 4050 - total flux cleaned = 0.00130788 Jy ! Total flux subtracted in 4096 components = 0.0013438 Jy ! Clean residual min=-0.001000 max=0.001022 Jy/beam ! Clean residual mean=-0.000002 rms=0.000323 Jy/beam ! Combined flux in latest and established models = 0.9431 Jy keep ! Adding 271 model components to the UV plane model. ! The established model now contains 515 components and 0.943101 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0900-2808_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9567 x 3.09 at -9.485 degrees (North through East) ! Clean map min=-0.0026333 max=0.41867 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0900-2808_X_map.fits wmodel /vlbi/bp222/maps//J0900-2808_X_map.mod ! Writing 515 model components to file: /vlbi/bp222/maps//J0900-2808_X_map.mod wobs /vlbi/bp222/maps//J0900-2808_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0900-2808_X_uvs.fits wwins /vlbi/bp222/maps//J0900-2808_X_map.win ! wwins: Wrote 9 windows to /vlbi/bp222/maps//J0900-2808_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.418673 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000322089 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.230793 0.230793 0.461586 0.923172 1.84634 3.69269 7.38537 14.7707 29.5415 59.083 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.418 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1299.87 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0900-2808_X_dfm.log closed on Thu Sep 27 10:57:58 2018