! Started logfile: /vlbi/bp222/maps//J0303+4716_S_dfm.log on Thu Sep 27 10:43:15 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/bp222/maps//J0303+4716_S_uva.fits
! Reading UV FITS file: /vlbi/bp222/maps//J0303+4716_S_uva.fits
! AN table 1: 14 integrations on 28 of 28 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0303+4716
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 1568 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0303+4716_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
!  A total of 56 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=2.304540Jy  sigma=21.247597
! Fit after  self-cal, rms=1.220626Jy  sigma=11.030715
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.488 mas, bmaj=11.88 mas, bpa=-37.27 degrees
! Estimated noise=2.61371 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.52347 Jy
! Component: 100  -  total flux cleaned = 1.84382 Jy
! Total flux subtracted in 100 components = 1.84382 Jy
! Clean residual min=-0.143334 max=0.216151 Jy/beam
! Clean residual mean=-0.000230 rms=0.047263 Jy/beam
! Combined flux in latest and established models = 1.84382 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 1.84382 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.699554Jy  sigma=5.522320
! Fit after  self-cal, rms=0.699513Jy  sigma=5.522190
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.97 mas, bmaj=11.69 mas, bpa=-38.32 degrees
! Estimated noise=2.18869 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.113571 Jy
! Component: 100  -  total flux cleaned = 0.113521 Jy
! Component: 150  -  total flux cleaned = 0.11411 Jy
! Component: 200  -  total flux cleaned = 0.107348 Jy
! Total flux subtracted in 200 components = 0.107348 Jy
! Clean residual min=-0.113897 max=0.209475 Jy/beam
! Clean residual mean=-0.000076 rms=0.041740 Jy/beam
! Combined flux in latest and established models = 1.95117 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 40 components and 1.95117 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.660974Jy  sigma=5.171151
! Fit after  self-cal, rms=0.660939Jy  sigma=5.170858
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.97 x 11.69 at -38.32 degrees (North through East)
! Clean map  min=-0.10989  max=2.0332 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        0.94     KP        0.94     LA        0.89     
!   MK        1.04     NL        1.02     OV        0.91     PT        0.89     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        0.97     KP        1.22     LA        0.91     
!   MK        1.04     NL        0.78     OV        0.91     PT        0.88     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.90     HN        0.97     KP        2.57     LA        0.85     
!   MK        1.07     NL        1.15     OV        0.90     PT        0.88     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD       17.66     HN        0.91     KP        1.00*    LA       39.52     
!   MK        1.00*    NL        1.00*    OV        1.00*    PT        0.95     
! 
! 
! Fit before self-cal, rms=0.660939Jy  sigma=5.170858
! Fit after  self-cal, rms=0.083825Jy  sigma=0.715120
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.995 mas, bmaj=11.85 mas, bpa=-38.28 degrees
! Estimated noise=2.16257 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0184484 Jy
! Component: 100  -  total flux cleaned = 0.0295897 Jy
! Component: 150  -  total flux cleaned = 0.0308233 Jy
! Component: 200  -  total flux cleaned = 0.0319151 Jy
! Total flux subtracted in 200 components = 0.0319151 Jy
! Clean residual min=-0.019364 max=0.025433 Jy/beam
! Clean residual mean=-0.000003 rms=0.005383 Jy/beam
! Combined flux in latest and established models = 1.98308 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 52 components and 1.98308 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079520Jy  sigma=0.637687
! Fit after  self-cal, rms=0.079495Jy  sigma=0.636360
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079495Jy  sigma=0.636360
! Fit after  self-cal, rms=0.075586Jy  sigma=0.628179
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.989 mas, bmaj=11.84 mas, bpa=-38.29 degrees
! Estimated noise=2.16464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0118376 Jy
! Component: 100  -  total flux cleaned = 0.0180905 Jy
! Component: 150  -  total flux cleaned = 0.0189395 Jy
! Component: 200  -  total flux cleaned = 0.0194573 Jy
! Total flux subtracted in 200 components = 0.0194573 Jy
! Clean residual min=-0.015810 max=0.021504 Jy/beam
! Clean residual mean=-0.000000 rms=0.004569 Jy/beam
! Combined flux in latest and established models = 2.00254 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 57 components and 2.00254 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073405Jy  sigma=0.589826
! Fit after  self-cal, rms=0.073381Jy  sigma=0.589545
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-13, -16.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0174339 Jy
! Component: 100  -  total flux cleaned = 0.022617 Jy
! Component: 150  -  total flux cleaned = 0.0241834 Jy
! Component: 200  -  total flux cleaned = 0.0254909 Jy
! Total flux subtracted in 200 components = 0.0254909 Jy
! Clean residual min=-0.011357 max=0.013133 Jy/beam
! Clean residual mean=-0.000004 rms=0.003274 Jy/beam
! Combined flux in latest and established models = 2.02803 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 84 components and 2.02803 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067721Jy  sigma=0.530975
! Fit after  self-cal, rms=0.067692Jy  sigma=0.528611
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067692Jy  sigma=0.528611
! Fit after  self-cal, rms=0.065284Jy  sigma=0.521136
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.985 mas, bmaj=11.84 mas, bpa=-38.31 degrees
! Estimated noise=2.16478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00736938 Jy
! Component: 100  -  total flux cleaned = 0.0101655 Jy
! Component: 150  -  total flux cleaned = 0.0109022 Jy
! Component: 200  -  total flux cleaned = 0.0117252 Jy
! Total flux subtracted in 200 components = 0.0117252 Jy
! Clean residual min=-0.009062 max=0.010367 Jy/beam
! Clean residual mean=-0.000001 rms=0.002665 Jy/beam
! Combined flux in latest and established models = 2.03976 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 107 components and 2.03976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064157Jy  sigma=0.504903
! Fit after  self-cal, rms=0.064131Jy  sigma=0.504360
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106782 Jy
! Component: 100  -  total flux cleaned = 0.000499098 Jy
! Component: 150  -  total flux cleaned = 0.000499293 Jy
! Component: 200  -  total flux cleaned = 0.000859841 Jy
! Total flux subtracted in 200 components = 0.000859841 Jy
! Clean residual min=-0.008177 max=0.009165 Jy/beam
! Clean residual mean=-0.000004 rms=0.002468 Jy/beam
! Combined flux in latest and established models = 2.04062 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 126 components and 2.04062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063630Jy  sigma=0.498113
! Fit after  self-cal, rms=0.063621Jy  sigma=0.497881
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063621Jy  sigma=0.497881
! Fit after  self-cal, rms=0.062663Jy  sigma=0.496101
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.37 mas, bmaj=15.67 mas, bpa=-54.53 degrees
! Estimated noise=2.94061 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0028086 Jy
! Component: 100  -  total flux cleaned = 0.00447281 Jy
! Component: 150  -  total flux cleaned = 0.00512685 Jy
! Component: 200  -  total flux cleaned = 0.00558822 Jy
! Total flux subtracted in 200 components = 0.00558822 Jy
! Clean residual min=-0.008705 max=0.009281 Jy/beam
! Clean residual mean=-0.000006 rms=0.003130 Jy/beam
! Combined flux in latest and established models = 2.04621 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 148 components and 2.04621 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062368Jy  sigma=0.492311
! Fit after  self-cal, rms=0.062373Jy  sigma=0.492119
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000325678 Jy
! Component: 100  -  total flux cleaned = 0.00083359 Jy
! Component: 150  -  total flux cleaned = 0.00121358 Jy
! Component: 200  -  total flux cleaned = 0.00165378 Jy
! Total flux subtracted in 200 components = 0.00165378 Jy
! Clean residual min=-0.008427 max=0.008631 Jy/beam
! Clean residual mean=-0.000010 rms=0.002980 Jy/beam
! Combined flux in latest and established models = 2.04786 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 160 components and 2.04786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062190Jy  sigma=0.491022
! Fit after  self-cal, rms=0.062174Jy  sigma=0.490833
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.983 mas, bmaj=11.83 mas, bpa=-38.32 degrees
! Estimated noise=2.16504 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.983 x 11.83 at -38.32 degrees (North through East)
! Clean map  min=-0.031717  max=2.0045 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062174Jy  sigma=0.490833
! Fit after  self-cal, rms=0.057556Jy  sigma=0.439547
! Inverting map and beam 
! Estimated beam: bmin=2.982 mas, bmaj=11.83 mas, bpa=-38.32 degrees
! Estimated noise=2.16517 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000984995 Jy
! Component: 100  -  total flux cleaned = 0.000658854 Jy
! Component: 150  -  total flux cleaned = 0.00095309 Jy
! Component: 200  -  total flux cleaned = 0.00139975 Jy
! Total flux subtracted in 200 components = 0.00139975 Jy
! Clean residual min=-0.006944 max=0.007322 Jy/beam
! Clean residual mean=-0.000005 rms=0.002010 Jy/beam
! Combined flux in latest and established models = 2.04926 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 173 components and 2.04926 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057205Jy  sigma=0.434612
! Fit after  self-cal, rms=0.057199Jy  sigma=0.434547
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000349306 Jy
! Component: 100  -  total flux cleaned = 0.000743114 Jy
! Component: 150  -  total flux cleaned = 0.00110748 Jy
! Component: 200  -  total flux cleaned = 0.00138274 Jy
! Total flux subtracted in 200 components = 0.00138274 Jy
! Clean residual min=-0.006444 max=0.006904 Jy/beam
! Clean residual mean=-0.000005 rms=0.001944 Jy/beam
! Combined flux in latest and established models = 2.05064 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 187 components and 2.05064 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057008Jy  sigma=0.432373
! Fit after  self-cal, rms=0.057005Jy  sigma=0.432326
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057005Jy  sigma=0.432326
! Fit after  self-cal, rms=0.056641Jy  sigma=0.431626
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.459 mas, bmaj=12.06 mas, bpa=-37.16 degrees
! Estimated noise=2.63264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.53449 Jy
! Component: 100  -  total flux cleaned = 1.86911 Jy
! Component: 150  -  total flux cleaned = 1.95559 Jy
! Component: 200  -  total flux cleaned = 1.98982 Jy
! Total flux subtracted in 200 components = 1.98982 Jy
! Clean residual min=-0.026728 max=0.030508 Jy/beam
! Clean residual mean=0.000025 rms=0.008500 Jy/beam
! Combined flux in latest and established models = 1.98982 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 1.98982 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.982 mas, bmaj=11.82 mas, bpa=-38.34 degrees
! Estimated noise=2.1651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0189163 Jy
! Component: 100  -  total flux cleaned = 0.0275714 Jy
! Component: 150  -  total flux cleaned = 0.0354161 Jy
! Component: 200  -  total flux cleaned = 0.0410876 Jy
! Total flux subtracted in 200 components = 0.0410876 Jy
! Clean residual min=-0.013480 max=0.013853 Jy/beam
! Clean residual mean=0.000010 rms=0.004588 Jy/beam
! Combined flux in latest and established models = 2.03091 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 52 components and 2.03091 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.365 mas, bmaj=15.67 mas, bpa=-54.56 degrees
! Estimated noise=2.94245 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00776523 Jy
! Component: 100  -  total flux cleaned = 0.00977908 Jy
! Component: 150  -  total flux cleaned = 0.0126717 Jy
! Component: 200  -  total flux cleaned = 0.0147139 Jy
! Total flux subtracted in 200 components = 0.0147139 Jy
! Clean residual min=-0.010614 max=0.011649 Jy/beam
! Clean residual mean=0.000001 rms=0.003890 Jy/beam
! Combined flux in latest and established models = 2.04562 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00175603 Jy
! Component: 100  -  total flux cleaned = 0.00253809 Jy
! Component: 150  -  total flux cleaned = 0.00301629 Jy
! Component: 200  -  total flux cleaned = 0.00364899 Jy
! Total flux subtracted in 200 components = 0.00364899 Jy
! Clean residual min=-0.009034 max=0.009873 Jy/beam
! Clean residual mean=-0.000004 rms=0.003270 Jy/beam
! Combined flux in latest and established models = 2.04927 Jy
! Adding 74 model components to the UV plane model.
! The established model now contains 122 components and 2.04927 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.982 mas, bmaj=11.82 mas, bpa=-38.34 degrees
! Estimated noise=2.1651 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00366519 Jy
! Component: 100  -  total flux cleaned = 0.00630227 Jy
! Component: 150  -  total flux cleaned = 0.0079342 Jy
! Component: 200  -  total flux cleaned = 0.00909507 Jy
! Total flux subtracted in 200 components = 0.00909507 Jy
! Clean residual min=-0.008039 max=0.008144 Jy/beam
! Clean residual mean=-0.000006 rms=0.002342 Jy/beam
! Combined flux in latest and established models = 2.05836 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 148 components and 2.05836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057772Jy  sigma=0.446420
! Fit after  self-cal, rms=0.057605Jy  sigma=0.444540
wmodel J0303+4716_S_map.mod
! Writing 148 model components to file: J0303+4716_S_map.mod
wobs   J0303+4716_S_uvs.fits
! Writing UV FITS file: J0303+4716_S_uvs.fits
wwins  J0303+4716_S_map.win
! wwins: Wrote 2 windows to J0303+4716_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000504013 Jy
! Component: 100  -  total flux cleaned = 0.000768743 Jy
! Component: 150  -  total flux cleaned = 0.000644089 Jy
! Component: 200  -  total flux cleaned = 0.000315382 Jy
! Component: 250  -  total flux cleaned = 0.000312359 Jy
! Component: 300  -  total flux cleaned = 0.000315803 Jy
! Component: 350  -  total flux cleaned = 0.000402909 Jy
! Component: 400  -  total flux cleaned = 7.159e-05 Jy
! Component: 450  -  total flux cleaned = 7.49124e-05 Jy
! Component: 500  -  total flux cleaned = 0.00014978 Jy
! Component: 550  -  total flux cleaned = 0.000433826 Jy
! Component: 600  -  total flux cleaned = 0.000432347 Jy
! Component: 650  -  total flux cleaned = 0.000433311 Jy
! Component: 700  -  total flux cleaned = 0.000495536 Jy
! Component: 750  -  total flux cleaned = 0.000312607 Jy
! Component: 800  -  total flux cleaned = 2.18292e-05 Jy
! Component: 850  -  total flux cleaned = -9.23888e-05 Jy
! Component: 900  -  total flux cleaned = -0.000365221 Jy
! Component: 950  -  total flux cleaned = -0.000574607 Jy
! Component: 1000  -  total flux cleaned = -0.000776625 Jy
! Component: 1050  -  total flux cleaned = -0.000872426 Jy
! Component: 1100  -  total flux cleaned = -0.000966222 Jy
! Component: 1150  -  total flux cleaned = -0.00106042 Jy
! Component: 1200  -  total flux cleaned = -0.00119763 Jy
! Component: 1250  -  total flux cleaned = -0.0013309 Jy
! Component: 1300  -  total flux cleaned = -0.00150167 Jy
! Component: 1350  -  total flux cleaned = -0.00158428 Jy
! Component: 1400  -  total flux cleaned = -0.00162479 Jy
! Component: 1450  -  total flux cleaned = -0.00158523 Jy
! Component: 1500  -  total flux cleaned = -0.00166234 Jy
! Component: 1550  -  total flux cleaned = -0.00166185 Jy
! Component: 1600  -  total flux cleaned = -0.00180816 Jy
! Component: 1650  -  total flux cleaned = -0.00184479 Jy
! Component: 1700  -  total flux cleaned = -0.00202245 Jy
! Component: 1750  -  total flux cleaned = -0.00209205 Jy
! Component: 1800  -  total flux cleaned = -0.00222791 Jy
! Component: 1850  -  total flux cleaned = -0.0024956 Jy
! Component: 1900  -  total flux cleaned = -0.00255985 Jy
! Component: 1950  -  total flux cleaned = -0.00278533 Jy
! Component: 2000  -  total flux cleaned = -0.00307039 Jy
! Component: 2050  -  total flux cleaned = -0.0031951 Jy
! Component: 2100  -  total flux cleaned = -0.00341033 Jy
! Component: 2150  -  total flux cleaned = -0.00356184 Jy
! Component: 2200  -  total flux cleaned = -0.00374061 Jy
! Component: 2250  -  total flux cleaned = -0.00400532 Jy
! Component: 2300  -  total flux cleaned = -0.00423778 Jy
! Component: 2350  -  total flux cleaned = -0.00443847 Jy
! Component: 2400  -  total flux cleaned = -0.00460855 Jy
! Component: 2450  -  total flux cleaned = -0.00477682 Jy
! Component: 2500  -  total flux cleaned = -0.00488797 Jy
! Component: 2550  -  total flux cleaned = -0.00505323 Jy
! Component: 2600  -  total flux cleaned = -0.00516216 Jy
! Component: 2650  -  total flux cleaned = -0.00521638 Jy
! Component: 2700  -  total flux cleaned = -0.00532399 Jy
! Component: 2750  -  total flux cleaned = -0.00543115 Jy
! Component: 2800  -  total flux cleaned = -0.00551114 Jy
! Component: 2850  -  total flux cleaned = -0.00564345 Jy
! Component: 2900  -  total flux cleaned = -0.00574876 Jy
! Component: 2950  -  total flux cleaned = -0.00582741 Jy
! Component: 3000  -  total flux cleaned = -0.00590578 Jy
! Component: 3050  -  total flux cleaned = -0.00600997 Jy
! Component: 3100  -  total flux cleaned = -0.00608779 Jy
! Component: 3150  -  total flux cleaned = -0.00619144 Jy
! Component: 3200  -  total flux cleaned = -0.0062172 Jy
! Component: 3250  -  total flux cleaned = -0.00626918 Jy
! Component: 3300  -  total flux cleaned = -0.00632098 Jy
! Component: 3350  -  total flux cleaned = -0.00632097 Jy
! Component: 3400  -  total flux cleaned = -0.00634696 Jy
! Component: 3450  -  total flux cleaned = -0.00637285 Jy
! Component: 3500  -  total flux cleaned = -0.00639877 Jy
! Component: 3550  -  total flux cleaned = -0.00647683 Jy
! Component: 3600  -  total flux cleaned = -0.00652901 Jy
! Component: 3650  -  total flux cleaned = -0.00660758 Jy
! Component: 3700  -  total flux cleaned = -0.00666024 Jy
! Component: 3750  -  total flux cleaned = -0.00673957 Jy
! Component: 3800  -  total flux cleaned = -0.00679269 Jy
! Component: 3850  -  total flux cleaned = -0.00689995 Jy
! Component: 3900  -  total flux cleaned = -0.00692694 Jy
! Component: 3950  -  total flux cleaned = -0.00703548 Jy
! Component: 4000  -  total flux cleaned = -0.00709002 Jy
! Component: 4050  -  total flux cleaned = -0.00711752 Jy
! Total flux subtracted in 4096 components = -0.00717293 Jy
! Clean residual min=-0.001495 max=0.001695 Jy/beam
! Clean residual mean=-0.000011 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 2.05119 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 475 components and 2.05119 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J0303+4716_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.982 x 11.82 at -38.34 degrees (North through East)
! Clean map  min=-0.01809  max=1.9897 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J0303+4716_S_map.fits
wmodel /vlbi/bp222/maps//J0303+4716_S_map.mod
! Writing 475 model components to file: /vlbi/bp222/maps//J0303+4716_S_map.mod
wobs   /vlbi/bp222/maps//J0303+4716_S_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J0303+4716_S_uvs.fits
wwins  /vlbi/bp222/maps//J0303+4716_S_map.win
! wwins: Wrote 3 windows to /vlbi/bp222/maps//J0303+4716_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 1.98969 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000468244 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.0706004 0.0706004 0.141201 0.282402 0.564803 1.12961 2.25921 4.51842 9.03685 18.0737 36.1474 72.2948
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0014 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       1.989 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  4249.27 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J0303+4716_S_dfm.log closed on Thu Sep 27 10:43:19 2018