! Started logfile: /vlbi/bp222/maps//J0138-2711_S_dfm.log on Thu Sep 27 10:38:30 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.22000
obs     /vlbi/bp222/maps//J0138-2711_S_uvm.fits
! Reading UV FITS file: /vlbi/bp222/maps//J0138-2711_S_uvm.fits
! AN table 1: 30 integrations on 45 of 45 possible baselines.
! AN table 2: 14 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.948909 visibilities/baseline/integration-bin.
! Found source: J0138-2711
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1     2.22e+09      3.2e+07          1      3.2e+07
!  02        2    2.252e+09      3.2e+07          1      3.2e+07
!  03        3    2.284e+09      3.2e+07          1      3.2e+07
!  04        4    2.348e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 54 lines of history.
! 
! Reading 6612 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0138-2711_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 230 telescope corrections were flagged in sub-array 1.
!  A total of 112 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.027957Jy  sigma=8.228685
! Fit after  self-cal, rms=0.768854Jy  sigma=6.031029
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.306 mas, bmaj=7.431 mas, bpa=-11.35 degrees
! Estimated noise=2.25659 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.182037 Jy
! Component: 100  -  total flux cleaned = 0.22174 Jy
! Total flux subtracted in 100 components = 0.22174 Jy
! Clean residual min=-0.010837 max=0.017669 Jy/beam
! Clean residual mean=0.000047 rms=0.003092 Jy/beam
! Combined flux in latest and established models = 0.22174 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.22174 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088879Jy  sigma=0.639500
! Fit after  self-cal, rms=0.088875Jy  sigma=0.639471
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.994 mas, bmaj=8.743 mas, bpa=-12.42 degrees
! Estimated noise=1.35759 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (41.5, -78).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0200099 Jy
! Component: 100  -  total flux cleaned = 0.0292145 Jy
! Component: 150  -  total flux cleaned = 0.0349792 Jy
! Component: 200  -  total flux cleaned = 0.0366957 Jy
! Total flux subtracted in 200 components = 0.0366957 Jy
! Clean residual min=-0.006124 max=0.008934 Jy/beam
! Clean residual mean=0.000004 rms=0.001715 Jy/beam
! Combined flux in latest and established models = 0.258436 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 39 components and 0.258436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085106Jy  sigma=0.594655
! Fit after  self-cal, rms=0.084848Jy  sigma=0.591850
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.994 x 8.743 at -12.42 degrees (North through East)
! Clean map  min=-0.0050389  max=0.22932 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.97     HN        1.08     KP        0.96     
!   LA        0.97     MK        0.98     NL        0.99     OV        0.96     
!   PT        0.95     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     FD        0.96     HN        1.07     LA        0.93     
!   MK        0.97     NL        1.09     OV        0.96     PT        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.97     HN        1.10     KP        0.97     
!   LA        0.95     MK        1.00     NL        0.97     OV        0.95     
!   PT        0.99     SC        0.99     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.16     FD        0.93     HN        1.18     LA        0.94     
!   MK        0.98     NL        1.10     OV        1.01     PT        0.95     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.23     FD        0.96     HN        1.05     KP        0.94     
!   LA        0.95     MK        1.05     NL        0.97     OV        0.96     
!   PT        0.96     SC        1.03     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        0.93     HN        1.15     LA        0.97     
!   MK        1.09     NL        1.06     OV        1.01     PT        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        9.85     HN        1.05     KP        1.00*    
!   LA        3.00     MK        1.00*    NL        1.00*    OV        1.02     
!   PT        0.92     SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    HN        0.00*    LA        0.00*    
!   MK        0.00*    NL        0.00*    OV        0.00*    PT        0.00*    
! 
! 
! Fit before self-cal, rms=0.084848Jy  sigma=0.591850
! Fit after  self-cal, rms=0.081485Jy  sigma=0.546691
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.011 mas, bmaj=8.724 mas, bpa=-12.33 degrees
! Estimated noise=1.35563 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00161397 Jy
! Component: 100  -  total flux cleaned = 0.0016061 Jy
! Component: 150  -  total flux cleaned = 0.00170225 Jy
! Component: 200  -  total flux cleaned = 0.00178813 Jy
! Total flux subtracted in 200 components = 0.00178813 Jy
! Clean residual min=-0.003797 max=0.003984 Jy/beam
! Clean residual mean=-0.000004 rms=0.000959 Jy/beam
! Combined flux in latest and established models = 0.260224 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.260224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081388Jy  sigma=0.545819
! Fit after  self-cal, rms=0.081563Jy  sigma=0.545682
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081563Jy  sigma=0.545682
! Fit after  self-cal, rms=0.079942Jy  sigma=0.540201
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.011 mas, bmaj=8.715 mas, bpa=-12.29 degrees
! Estimated noise=1.3536 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196287 Jy
! Component: 100  -  total flux cleaned = 0.000154166 Jy
! Component: 150  -  total flux cleaned = 0.000227354 Jy
! Component: 200  -  total flux cleaned = 0.000327335 Jy
! Total flux subtracted in 200 components = 0.000327335 Jy
! Clean residual min=-0.003708 max=0.003745 Jy/beam
! Clean residual mean=-0.000004 rms=0.000930 Jy/beam
! Combined flux in latest and established models = 0.260551 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 70 components and 0.260551 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079907Jy  sigma=0.539886
! Fit after  self-cal, rms=0.079904Jy  sigma=0.539849
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.30703e-05 Jy
! Component: 100  -  total flux cleaned = -1.1607e-05 Jy
! Component: 150  -  total flux cleaned = 1.85638e-05 Jy
! Component: 200  -  total flux cleaned = 4.62245e-05 Jy
! Total flux subtracted in 200 components = 4.62245e-05 Jy
! Clean residual min=-0.003602 max=0.003629 Jy/beam
! Clean residual mean=-0.000005 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.260597 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 77 components and 0.260597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079882Jy  sigma=0.539677
! Fit after  self-cal, rms=0.079883Jy  sigma=0.539666
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079883Jy  sigma=0.539666
! Fit after  self-cal, rms=0.079997Jy  sigma=0.539632
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=8.708 mas, bpa=-12.27 degrees
! Estimated noise=1.35301 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140959 Jy
! Component: 100  -  total flux cleaned = -5.02105e-05 Jy
! Component: 150  -  total flux cleaned = 4.59624e-06 Jy
! Component: 200  -  total flux cleaned = 5.6203e-05 Jy
! Total flux subtracted in 200 components = 5.6203e-05 Jy
! Clean residual min=-0.003510 max=0.003580 Jy/beam
! Clean residual mean=-0.000004 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.260654 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 86 components and 0.260654 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079974Jy  sigma=0.539491
! Fit after  self-cal, rms=0.079976Jy  sigma=0.539480
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000101473 Jy
! Component: 100  -  total flux cleaned = -5.31919e-05 Jy
! Component: 150  -  total flux cleaned = -2.95421e-05 Jy
! Component: 200  -  total flux cleaned = -7.52241e-06 Jy
! Total flux subtracted in 200 components = -7.52241e-06 Jy
! Clean residual min=-0.003444 max=0.003545 Jy/beam
! Clean residual mean=-0.000005 rms=0.000898 Jy/beam
! Combined flux in latest and established models = 0.260646 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 97 components and 0.260646 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079960Jy  sigma=0.539387
! Fit after  self-cal, rms=0.079961Jy  sigma=0.539380
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079961Jy  sigma=0.539380
! Fit after  self-cal, rms=0.080084Jy  sigma=0.539356
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.73 mas, bmaj=20.21 mas, bpa=-6.674 degrees
! Estimated noise=1.76748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00095754 Jy
! Component: 100  -  total flux cleaned = 0.00106887 Jy
! Component: 150  -  total flux cleaned = 0.00112909 Jy
! Component: 200  -  total flux cleaned = 0.00117935 Jy
! Total flux subtracted in 200 components = 0.00117935 Jy
! Clean residual min=-0.003324 max=0.005456 Jy/beam
! Clean residual mean=-0.000012 rms=0.001387 Jy/beam
! Combined flux in latest and established models = 0.261826 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 116 components and 0.261826 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080082Jy  sigma=0.539447
! Fit after  self-cal, rms=0.080079Jy  sigma=0.539437
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.88683e-05 Jy
! Component: 100  -  total flux cleaned = 2.79082e-05 Jy
! Component: 150  -  total flux cleaned = 7.05071e-05 Jy
! Component: 200  -  total flux cleaned = 0.000109676 Jy
! Total flux subtracted in 200 components = 0.000109676 Jy
! Clean residual min=-0.003203 max=0.005358 Jy/beam
! Clean residual mean=-0.000013 rms=0.001376 Jy/beam
! Combined flux in latest and established models = 0.261935 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 124 components and 0.261935 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080079Jy  sigma=0.539516
! Fit after  self-cal, rms=0.080078Jy  sigma=0.539511
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=8.703 mas, bpa=-12.24 degrees
! Estimated noise=1.35261 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.01 x 8.703 at -12.24 degrees (North through East)
! Clean map  min=-0.0031447  max=0.22953 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.3 mas, bmaj=7.338 mas, bpa=-11.03 degrees
! Estimated noise=2.27806 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.183612 Jy
! Component: 100  -  total flux cleaned = 0.224179 Jy
! Component: 150  -  total flux cleaned = 0.237456 Jy
! Component: 200  -  total flux cleaned = 0.24511 Jy
! Total flux subtracted in 200 components = 0.24511 Jy
! Clean residual min=-0.005223 max=0.005447 Jy/beam
! Clean residual mean=0.000005 rms=0.001446 Jy/beam
! Combined flux in latest and established models = 0.24511 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.24511 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=8.703 mas, bpa=-12.24 degrees
! Estimated noise=1.35261 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00631992 Jy
! Component: 100  -  total flux cleaned = 0.0100318 Jy
! Component: 150  -  total flux cleaned = 0.0123319 Jy
! Component: 200  -  total flux cleaned = 0.013621 Jy
! Total flux subtracted in 200 components = 0.013621 Jy
! Clean residual min=-0.003715 max=0.003890 Jy/beam
! Clean residual mean=-0.000002 rms=0.000961 Jy/beam
! Combined flux in latest and established models = 0.258731 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 44 components and 0.258731 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.73 mas, bmaj=20.21 mas, bpa=-6.674 degrees
! Estimated noise=1.76748 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00193976 Jy
! Component: 100  -  total flux cleaned = 0.00216021 Jy
! Component: 150  -  total flux cleaned = 0.00230948 Jy
! Component: 200  -  total flux cleaned = 0.00237522 Jy
! Total flux subtracted in 200 components = 0.00237522 Jy
! Clean residual min=-0.003360 max=0.005586 Jy/beam
! Clean residual mean=-0.000011 rms=0.001410 Jy/beam
! Combined flux in latest and established models = 0.261106 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.95524e-05 Jy
! Component: 100  -  total flux cleaned = 8.4794e-05 Jy
! Component: 150  -  total flux cleaned = 0.000135675 Jy
! Component: 200  -  total flux cleaned = 0.000158577 Jy
! Total flux subtracted in 200 components = 0.000158577 Jy
! Clean residual min=-0.003234 max=0.005525 Jy/beam
! Clean residual mean=-0.000012 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 0.261265 Jy
! Adding 19 model components to the UV plane model.
! The established model now contains 61 components and 0.261265 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.01 mas, bmaj=8.703 mas, bpa=-12.24 degrees
! Estimated noise=1.35261 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000627913 Jy
! Component: 100  -  total flux cleaned = -0.000455273 Jy
! Component: 150  -  total flux cleaned = -0.000491784 Jy
! Component: 200  -  total flux cleaned = -0.000491021 Jy
! Total flux subtracted in 200 components = -0.000491021 Jy
! Clean residual min=-0.003336 max=0.003811 Jy/beam
! Clean residual mean=-0.000005 rms=0.000911 Jy/beam
! Combined flux in latest and established models = 0.260774 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 78 components and 0.260774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080115Jy  sigma=0.539829
! Fit after  self-cal, rms=0.080099Jy  sigma=0.539763
wmodel J0138-2711_S_map.mod
! Writing 78 model components to file: J0138-2711_S_map.mod
wobs   J0138-2711_S_uvs.fits
! Writing UV FITS file: J0138-2711_S_uvs.fits
wwins  J0138-2711_S_map.win
! wwins: Wrote 2 windows to J0138-2711_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505279 Jy
! Component: 100  -  total flux cleaned = 0.000503251 Jy
! Component: 150  -  total flux cleaned = 0.000665628 Jy
! Component: 200  -  total flux cleaned = 0.000766609 Jy
! Component: 250  -  total flux cleaned = 0.000858947 Jy
! Component: 300  -  total flux cleaned = 0.000903594 Jy
! Component: 350  -  total flux cleaned = 0.00107259 Jy
! Component: 400  -  total flux cleaned = 0.000991474 Jy
! Component: 450  -  total flux cleaned = 0.000991714 Jy
! Component: 500  -  total flux cleaned = 0.00102882 Jy
! Component: 550  -  total flux cleaned = 0.00106511 Jy
! Component: 600  -  total flux cleaned = 0.00102933 Jy
! Component: 650  -  total flux cleaned = 0.000959834 Jy
! Component: 700  -  total flux cleaned = 0.000893444 Jy
! Component: 750  -  total flux cleaned = 0.000828999 Jy
! Component: 800  -  total flux cleaned = 0.000735667 Jy
! Component: 850  -  total flux cleaned = 0.000644318 Jy
! Component: 900  -  total flux cleaned = 0.000494768 Jy
! Component: 950  -  total flux cleaned = 0.00028909 Jy
! Component: 1000  -  total flux cleaned = 2.7178e-06 Jy
! Component: 1050  -  total flux cleaned = -0.000136855 Jy
! Component: 1100  -  total flux cleaned = -0.000301773 Jy
! Component: 1150  -  total flux cleaned = -0.000382156 Jy
! Component: 1200  -  total flux cleaned = -0.000593348 Jy
! Component: 1250  -  total flux cleaned = -0.000592729 Jy
! Component: 1300  -  total flux cleaned = -0.000643309 Jy
! Component: 1350  -  total flux cleaned = -0.000592734 Jy
! Component: 1400  -  total flux cleaned = -0.000617412 Jy
! Component: 1450  -  total flux cleaned = -0.000593396 Jy
! Component: 1500  -  total flux cleaned = -0.000545501 Jy
! Component: 1550  -  total flux cleaned = -0.000451922 Jy
! Component: 1600  -  total flux cleaned = -0.000497992 Jy
! Component: 1650  -  total flux cleaned = -0.000497742 Jy
! Component: 1700  -  total flux cleaned = -0.000475376 Jy
! Component: 1750  -  total flux cleaned = -0.000519517 Jy
! Component: 1800  -  total flux cleaned = -0.000584739 Jy
! Component: 1850  -  total flux cleaned = -0.000562899 Jy
! Component: 1900  -  total flux cleaned = -0.000626524 Jy
! Component: 1950  -  total flux cleaned = -0.000626764 Jy
! Component: 2000  -  total flux cleaned = -0.000605896 Jy
! Component: 2050  -  total flux cleaned = -0.000647059 Jy
! Component: 2100  -  total flux cleaned = -0.000606424 Jy
! Component: 2150  -  total flux cleaned = -0.000566296 Jy
! Component: 2200  -  total flux cleaned = -0.000526545 Jy
! Component: 2250  -  total flux cleaned = -0.000467389 Jy
! Component: 2300  -  total flux cleaned = -0.000467627 Jy
! Component: 2350  -  total flux cleaned = -0.000351103 Jy
! Component: 2400  -  total flux cleaned = -0.000254974 Jy
! Component: 2450  -  total flux cleaned = -0.000159594 Jy
! Component: 2500  -  total flux cleaned = -0.000121852 Jy
! Component: 2550  -  total flux cleaned = -2.75186e-05 Jy
! Component: 2600  -  total flux cleaned = 6.62233e-05 Jy
! Component: 2650  -  total flux cleaned = 0.000159533 Jy
! Component: 2700  -  total flux cleaned = 0.000270895 Jy
! Component: 2750  -  total flux cleaned = 0.000344958 Jy
! Component: 2800  -  total flux cleaned = 0.000492428 Jy
! Component: 2850  -  total flux cleaned = 0.000584103 Jy
! Component: 2900  -  total flux cleaned = 0.000712145 Jy
! Component: 2950  -  total flux cleaned = 0.000803288 Jy
! Component: 3000  -  total flux cleaned = 0.000894369 Jy
! Component: 3050  -  total flux cleaned = 0.00103942 Jy
! Component: 3100  -  total flux cleaned = 0.00114798 Jy
! Component: 3150  -  total flux cleaned = 0.00123836 Jy
! Component: 3200  -  total flux cleaned = 0.00134656 Jy
! Component: 3250  -  total flux cleaned = 0.0014545 Jy
! Component: 3300  -  total flux cleaned = 0.00152652 Jy
! Component: 3350  -  total flux cleaned = 0.00167013 Jy
! Component: 3400  -  total flux cleaned = 0.001742 Jy
! Component: 3450  -  total flux cleaned = 0.00179576 Jy
! Component: 3500  -  total flux cleaned = 0.00188553 Jy
! Component: 3550  -  total flux cleaned = 0.00199349 Jy
! Component: 3600  -  total flux cleaned = 0.0020475 Jy
! Component: 3650  -  total flux cleaned = 0.00211961 Jy
! Component: 3700  -  total flux cleaned = 0.00217374 Jy
! Component: 3750  -  total flux cleaned = 0.00228203 Jy
! Component: 3800  -  total flux cleaned = 0.00237252 Jy
! Component: 3850  -  total flux cleaned = 0.00246314 Jy
! Component: 3900  -  total flux cleaned = 0.00253579 Jy
! Component: 3950  -  total flux cleaned = 0.00266344 Jy
! Component: 4000  -  total flux cleaned = 0.00277286 Jy
! Component: 4050  -  total flux cleaned = 0.00286446 Jy
! Total flux subtracted in 4096 components = 0.00295625 Jy
! Clean residual min=-0.001046 max=0.001115 Jy/beam
! Clean residual mean=0.000002 rms=0.000307 Jy/beam
! Combined flux in latest and established models = 0.26373 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 360 components and 0.26373 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /vlbi/bp222/maps//J0138-2711_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.01 x 8.703 at -12.24 degrees (North through East)
! Clean map  min=-0.0043806  max=0.23005 Jy/beam
! Writing clean map to FITS file: /vlbi/bp222/maps//J0138-2711_S_map.fits
wmodel /vlbi/bp222/maps//J0138-2711_S_map.mod
! Writing 360 model components to file: /vlbi/bp222/maps//J0138-2711_S_map.mod
wobs   /vlbi/bp222/maps//J0138-2711_S_uvs.fits
! Writing UV FITS file: /vlbi/bp222/maps//J0138-2711_S_uvs.fits
wwins  /vlbi/bp222/maps//J0138-2711_S_map.win
! wwins: Wrote 3 windows to /vlbi/bp222/maps//J0138-2711_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.230054 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000297178 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.387533 0.387533 0.775065 1.55013 3.10026 6.20052 12.401 24.8021 49.6042 99.2083
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.23 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  774.128 
quit
! Quitting program
! Log file /vlbi/bp222/maps//J0138-2711_S_dfm.log closed on Thu Sep 27 10:38:33 2018