! Started logfile: /vlbi/bp222/maps//J0132-1654_X_dfm.log on Thu Sep 27 10:38:12 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0132-1654_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0132-1654_X_uvm.fits ! AN table 1: 48 integrations on 45 of 45 possible baselines. ! AN table 2: 45 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.918713 visibilities/baseline/integration-bin. ! Found source: J0132-1654 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 37704 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0132-1654_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 5. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 6. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 9. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 10. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 11. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 12. ! A total of 44 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.306440Jy sigma=16.925584 ! Fit after self-cal, rms=0.231326Jy sigma=2.610815 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6044 mas, bmaj=1.837 mas, bpa=-9.084 degrees ! Estimated noise=0.672117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.603568 Jy ! Component: 100 - total flux cleaned = 0.74744 Jy ! Total flux subtracted in 100 components = 0.74744 Jy ! Clean residual min=-0.026650 max=0.059505 Jy/beam ! Clean residual mean=0.000028 rms=0.005892 Jy/beam ! Combined flux in latest and established models = 0.74744 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.74744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.160941Jy sigma=2.119593 ! Fit after self-cal, rms=0.160832Jy sigma=2.118365 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0669191 Jy ! Component: 100 - total flux cleaned = 0.104443 Jy ! Total flux subtracted in 100 components = 0.104443 Jy ! Clean residual min=-0.019878 max=0.035009 Jy/beam ! Clean residual mean=0.000014 rms=0.003765 Jy/beam ! Combined flux in latest and established models = 0.851883 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 7 components and 0.851883 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.119781Jy sigma=1.428363 ! Fit after self-cal, rms=0.119694Jy sigma=1.427605 ! Inverting map ! Added new window around map position (-1.4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316945 Jy ! Component: 100 - total flux cleaned = 0.0502242 Jy ! Total flux subtracted in 100 components = 0.0502242 Jy ! Clean residual min=-0.021513 max=0.022223 Jy/beam ! Clean residual mean=0.000012 rms=0.003090 Jy/beam ! Combined flux in latest and established models = 0.902108 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 16 components and 0.902108 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.106623Jy sigma=1.226417 ! Fit after self-cal, rms=0.105103Jy sigma=1.209835 ! Inverting map ! Added new window around map position (-2.2, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0231467 Jy ! Component: 100 - total flux cleaned = 0.0368735 Jy ! Total flux subtracted in 100 components = 0.0368735 Jy ! Clean residual min=-0.017377 max=0.016033 Jy/beam ! Clean residual mean=0.000013 rms=0.002563 Jy/beam ! Combined flux in latest and established models = 0.938981 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 23 components and 0.938981 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.098408Jy sigma=1.124121 ! Fit after self-cal, rms=0.097565Jy sigma=1.112655 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8644 mas, bmaj=2.33 mas, bpa=-8.807 degrees ! Estimated noise=0.306543 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0127151 Jy ! Component: 100 - total flux cleaned = 0.0195606 Jy ! Component: 150 - total flux cleaned = 0.0216346 Jy ! Component: 200 - total flux cleaned = 0.0223937 Jy ! Total flux subtracted in 200 components = 0.0223937 Jy ! Clean residual min=-0.011654 max=0.019752 Jy/beam ! Clean residual mean=0.000033 rms=0.003428 Jy/beam ! Combined flux in latest and established models = 0.961375 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 34 components and 0.961375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.095912Jy sigma=1.086796 ! Fit after self-cal, rms=0.095708Jy sigma=1.083983 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8644 x 2.33 at -8.807 degrees (North through East) ! Clean map min=-0.0096514 max=0.81139 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.98 HN 1.02 KP 1.01 ! LA 1.00 MK 1.00 NL 0.98 OV 0.99 ! PT 1.03 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.99 HN 1.16 LA 0.96 ! MK 1.02 NL 1.00 OV 0.96 PT 1.07 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.02 KP 1.00 ! LA 0.99 MK 1.01 NL 0.99 OV 1.00 ! PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.22 LA 0.96 ! MK 1.01 NL 0.98 OV 0.97 PT 1.07 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 0.98 OV 1.00 ! PT 1.06 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.22 LA 0.96 ! MK 1.00 NL 0.97 OV 0.96 PT 1.08 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.99 HN 1.02 KP 1.00 ! LA 0.99 MK 1.00 NL 0.98 OV 1.00 ! PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.01 HN 1.23 LA 0.96 ! MK 1.01 NL 0.97 OV 0.95 PT 1.08 ! ! ! Correcting IF 5. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.02 KP 0.99 ! LA 1.00 MK 1.00 NL 0.98 OV 0.99 ! PT 1.05 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.21 LA 0.96 ! MK 1.01 NL 0.96 OV 0.96 PT 1.08 ! ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.02 KP 1.00 ! LA 0.99 MK 0.99 NL 0.98 OV 0.99 ! PT 1.05 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.01 HN 1.21 LA 0.96 ! MK 1.01 NL 0.97 OV 0.95 PT 1.08 ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 1.00 ! LA 0.99 MK 1.00 NL 0.98 OV 1.00 ! PT 1.05 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.22 LA 0.96 ! MK 1.02 NL 0.96 OV 0.95 PT 1.07 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.99 HN 1.01 KP 0.99 ! LA 0.98 MK 1.00 NL 0.98 OV 0.99 ! PT 1.06 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 1.00 HN 1.19 LA 0.96 ! MK 1.00 NL 0.96 OV 0.95 PT 1.08 ! ! ! Correcting IF 9. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.01 KP 0.99 ! LA 0.98 MK 1.00 NL 0.98 OV 0.99 ! PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.22 LA 0.95 ! MK 1.01 NL 0.95 OV 0.94 PT 1.08 ! ! ! Correcting IF 10. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.99 HN 1.01 KP 0.98 ! LA 0.99 MK 1.00 NL 0.98 OV 0.99 ! PT 1.05 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.99 HN 1.21 LA 0.96 ! MK 1.00 NL 0.97 OV 0.95 PT 1.09 ! ! ! Correcting IF 11. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 0.98 HN 1.00 KP 0.99 ! LA 0.99 MK 0.99 NL 0.97 OV 0.99 ! PT 1.05 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.00 HN 1.21 LA 0.96 ! MK 1.01 NL 0.96 OV 0.95 PT 1.08 ! ! ! Correcting IF 12. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 1.00 KP 0.99 ! LA 0.98 MK 0.97 NL 0.98 OV 0.99 ! PT 1.04 SC 1.00 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 1.24 LA 0.95 ! MK 1.00 NL 0.97 OV 0.94 PT 1.07 ! ! ! Fit before self-cal, rms=0.095708Jy sigma=1.083983 ! Fit after self-cal, rms=0.090466Jy sigma=0.969712 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8675 mas, bmaj=2.323 mas, bpa=-8.781 degrees ! Estimated noise=0.305391 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01442 Jy ! Component: 100 - total flux cleaned = 0.0227508 Jy ! Component: 150 - total flux cleaned = 0.0276043 Jy ! Component: 200 - total flux cleaned = 0.0304062 Jy ! Total flux subtracted in 200 components = 0.0304062 Jy ! Clean residual min=-0.006566 max=0.006818 Jy/beam ! Clean residual mean=0.000013 rms=0.001500 Jy/beam ! Combined flux in latest and established models = 0.991781 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 70 components and 0.991781 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087525Jy sigma=0.933547 ! Fit after self-cal, rms=0.087346Jy sigma=0.931373 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.087346Jy sigma=0.931373 ! Fit after self-cal, rms=0.070549Jy sigma=0.776858 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8663 mas, bmaj=2.322 mas, bpa=-8.788 degrees ! Estimated noise=0.305975 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00561989 Jy ! Component: 100 - total flux cleaned = 0.00862003 Jy ! Component: 150 - total flux cleaned = 0.0101954 Jy ! Component: 200 - total flux cleaned = 0.0115283 Jy ! Total flux subtracted in 200 components = 0.0115283 Jy ! Clean residual min=-0.003202 max=0.004383 Jy/beam ! Clean residual mean=0.000005 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 1.00331 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 84 components and 1.00331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.070044Jy sigma=0.768700 ! Fit after self-cal, rms=0.070001Jy sigma=0.768180 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-4.2, 37.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00393652 Jy ! Component: 100 - total flux cleaned = 0.00611476 Jy ! Component: 150 - total flux cleaned = 0.00747904 Jy ! Component: 200 - total flux cleaned = 0.00834928 Jy ! Total flux subtracted in 200 components = 0.00834928 Jy ! Clean residual min=-0.003099 max=0.003683 Jy/beam ! Clean residual mean=0.000001 rms=0.000746 Jy/beam ! Combined flux in latest and established models = 1.01166 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 111 components and 1.01166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069742Jy sigma=0.764182 ! Fit after self-cal, rms=0.069733Jy sigma=0.764064 ! Inverting map ! Added new window around map position (-10.6, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00360503 Jy ! Component: 100 - total flux cleaned = 0.0056732 Jy ! Component: 150 - total flux cleaned = 0.00648281 Jy ! Component: 200 - total flux cleaned = 0.00728547 Jy ! Total flux subtracted in 200 components = 0.00728547 Jy ! Clean residual min=-0.003164 max=0.003428 Jy/beam ! Clean residual mean=0.000002 rms=0.000604 Jy/beam ! Combined flux in latest and established models = 1.01894 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 125 components and 1.01894 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069524Jy sigma=0.760935 ! Fit after self-cal, rms=0.069507Jy sigma=0.760772 ! Inverting map ! Added new window around map position (-5, 0). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00311598 Jy ! Component: 100 - total flux cleaned = 0.00397055 Jy ! Component: 150 - total flux cleaned = 0.00492824 Jy ! Component: 200 - total flux cleaned = 0.00543427 Jy ! Total flux subtracted in 200 components = 0.00543427 Jy ! Clean residual min=-0.002751 max=0.002296 Jy/beam ! Clean residual mean=0.000003 rms=0.000505 Jy/beam ! Combined flux in latest and established models = 1.02438 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 151 components and 1.02438 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069303Jy sigma=0.758173 ! Fit after self-cal, rms=0.069289Jy sigma=0.758047 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069289Jy sigma=0.758047 ! Fit after self-cal, rms=0.069170Jy sigma=0.756729 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8659 mas, bmaj=2.322 mas, bpa=-8.8 degrees ! Estimated noise=0.305836 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00176171 Jy ! Component: 100 - total flux cleaned = 0.00256443 Jy ! Component: 150 - total flux cleaned = 0.003019 Jy ! Component: 200 - total flux cleaned = 0.00322055 Jy ! Total flux subtracted in 200 components = 0.00322055 Jy ! Clean residual min=-0.002558 max=0.001924 Jy/beam ! Clean residual mean=0.000003 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 1.0276 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 164 components and 1.0276 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069089Jy sigma=0.755793 ! Fit after self-cal, rms=0.069085Jy sigma=0.755761 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000606704 Jy ! Component: 100 - total flux cleaned = 0.000713526 Jy ! Component: 150 - total flux cleaned = 0.00071341 Jy ! Component: 200 - total flux cleaned = 0.000745612 Jy ! Total flux subtracted in 200 components = 0.000745612 Jy ! Clean residual min=-0.002422 max=0.001814 Jy/beam ! Clean residual mean=0.000003 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 1.02834 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 185 components and 1.02834 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069050Jy sigma=0.755377 ! Fit after self-cal, rms=0.069049Jy sigma=0.755367 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069049Jy sigma=0.755367 ! Fit after self-cal, rms=0.069067Jy sigma=0.755232 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.237 mas, bmaj=4.5 mas, bpa=-1.319 degrees ! Estimated noise=0.376139 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000681855 Jy ! Component: 100 - total flux cleaned = 0.00128318 Jy ! Component: 150 - total flux cleaned = 0.00179332 Jy ! Component: 200 - total flux cleaned = 0.00212037 Jy ! Total flux subtracted in 200 components = 0.00212037 Jy ! Clean residual min=-0.002329 max=0.001846 Jy/beam ! Clean residual mean=0.000006 rms=0.000546 Jy/beam ! Combined flux in latest and established models = 1.03047 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 200 components and 1.03047 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069044Jy sigma=0.754902 ! Fit after self-cal, rms=0.069040Jy sigma=0.754869 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368163 Jy ! Component: 100 - total flux cleaned = 0.000559936 Jy ! Component: 150 - total flux cleaned = 0.000658808 Jy ! Component: 200 - total flux cleaned = 0.000750783 Jy ! Total flux subtracted in 200 components = 0.000750783 Jy ! Clean residual min=-0.002291 max=0.001802 Jy/beam ! Clean residual mean=0.000006 rms=0.000542 Jy/beam ! Combined flux in latest and established models = 1.03122 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 212 components and 1.03122 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069029Jy sigma=0.754732 ! Fit after self-cal, rms=0.069027Jy sigma=0.754722 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8658 mas, bmaj=2.322 mas, bpa=-8.804 degrees ! Estimated noise=0.305866 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8658 x 2.322 at -8.804 degrees (North through East) ! Clean map min=-0.0021042 max=0.81061 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.069027Jy sigma=0.754722 ! Fit after self-cal, rms=0.065390Jy sigma=0.696182 ! Inverting map and beam ! Estimated beam: bmin=0.8658 mas, bmaj=2.322 mas, bpa=-8.803 degrees ! Estimated noise=0.30597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.95833e-05 Jy ! Component: 100 - total flux cleaned = 4.73259e-06 Jy ! Component: 150 - total flux cleaned = 0.000121724 Jy ! Component: 200 - total flux cleaned = 0.0001764 Jy ! Total flux subtracted in 200 components = 0.0001764 Jy ! Clean residual min=-0.002173 max=0.001577 Jy/beam ! Clean residual mean=0.000002 rms=0.000333 Jy/beam ! Combined flux in latest and established models = 1.03139 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 231 components and 1.03139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065358Jy sigma=0.695861 ! Fit after self-cal, rms=0.065358Jy sigma=0.695857 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000169585 Jy ! Component: 100 - total flux cleaned = 0.000169739 Jy ! Component: 150 - total flux cleaned = 0.000219753 Jy ! Component: 200 - total flux cleaned = 0.000266674 Jy ! Total flux subtracted in 200 components = 0.000266674 Jy ! Clean residual min=-0.002057 max=0.001486 Jy/beam ! Clean residual mean=0.000002 rms=0.000327 Jy/beam ! Combined flux in latest and established models = 1.03166 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 235 components and 1.03166 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065339Jy sigma=0.695635 ! Fit after self-cal, rms=0.065339Jy sigma=0.695632 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065339Jy sigma=0.695632 ! Fit after self-cal, rms=0.065357Jy sigma=0.695602 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.605 mas, bmaj=1.832 mas, bpa=-9.109 degrees ! Estimated noise=0.671255 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.602421 Jy ! Component: 100 - total flux cleaned = 0.746683 Jy ! Component: 150 - total flux cleaned = 0.815021 Jy ! Component: 200 - total flux cleaned = 0.85817 Jy ! Total flux subtracted in 200 components = 0.85817 Jy ! Clean residual min=-0.013930 max=0.024495 Jy/beam ! Clean residual mean=0.000010 rms=0.002676 Jy/beam ! Combined flux in latest and established models = 0.85817 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.85817 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.322 mas, bpa=-8.803 degrees ! Estimated noise=0.306021 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0457579 Jy ! Component: 100 - total flux cleaned = 0.0713956 Jy ! Component: 150 - total flux cleaned = 0.0888506 Jy ! Component: 200 - total flux cleaned = 0.101982 Jy ! Total flux subtracted in 200 components = 0.101982 Jy ! Clean residual min=-0.005678 max=0.008610 Jy/beam ! Clean residual mean=-0.000005 rms=0.002102 Jy/beam ! Combined flux in latest and established models = 0.960152 Jy ! Adding 42 model components to the UV plane model. ! The established model now contains 47 components and 0.960152 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.238 mas, bmaj=4.5 mas, bpa=-1.317 degrees ! Estimated noise=0.376327 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178588 Jy ! Component: 100 - total flux cleaned = 0.0300193 Jy ! Component: 150 - total flux cleaned = 0.0387922 Jy ! Component: 200 - total flux cleaned = 0.0454173 Jy ! Total flux subtracted in 200 components = 0.0454173 Jy ! Clean residual min=-0.003877 max=0.004516 Jy/beam ! Clean residual mean=0.000001 rms=0.001443 Jy/beam ! Combined flux in latest and established models = 1.00557 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0051027 Jy ! Component: 100 - total flux cleaned = 0.00914989 Jy ! Component: 150 - total flux cleaned = 0.0124179 Jy ! Component: 200 - total flux cleaned = 0.0151064 Jy ! Total flux subtracted in 200 components = 0.0151064 Jy ! Clean residual min=-0.002328 max=0.002620 Jy/beam ! Clean residual mean=0.000004 rms=0.000767 Jy/beam ! Combined flux in latest and established models = 1.02068 Jy ! Adding 115 model components to the UV plane model. ! The established model now contains 148 components and 1.02068 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8657 mas, bmaj=2.322 mas, bpa=-8.803 degrees ! Estimated noise=0.306021 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236066 Jy ! Component: 100 - total flux cleaned = 0.00414662 Jy ! Component: 150 - total flux cleaned = 0.0053658 Jy ! Component: 200 - total flux cleaned = 0.00616686 Jy ! Total flux subtracted in 200 components = 0.00616686 Jy ! Clean residual min=-0.002128 max=0.002635 Jy/beam ! Clean residual mean=0.000002 rms=0.000426 Jy/beam ! Combined flux in latest and established models = 1.02684 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 172 components and 1.02684 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065727Jy sigma=0.700167 ! Fit after self-cal, rms=0.065687Jy sigma=0.699552 wmodel J0132-1654_X_map.mod ! Writing 172 model components to file: J0132-1654_X_map.mod wobs J0132-1654_X_uvs.fits ! Writing UV FITS file: J0132-1654_X_uvs.fits wwins J0132-1654_X_map.win ! wwins: Wrote 7 windows to J0132-1654_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000913306 Jy ! Component: 100 - total flux cleaned = 0.00144508 Jy ! Component: 150 - total flux cleaned = 0.00190536 Jy ! Component: 200 - total flux cleaned = 0.00230779 Jy ! Component: 250 - total flux cleaned = 0.00266359 Jy ! Component: 300 - total flux cleaned = 0.003004 Jy ! Component: 350 - total flux cleaned = 0.00338418 Jy ! Component: 400 - total flux cleaned = 0.00364547 Jy ! Component: 450 - total flux cleaned = 0.00397412 Jy ! Component: 500 - total flux cleaned = 0.00416988 Jy ! Component: 550 - total flux cleaned = 0.00431351 Jy ! Component: 600 - total flux cleaned = 0.00447574 Jy ! Component: 650 - total flux cleaned = 0.00452052 Jy ! Component: 700 - total flux cleaned = 0.00458649 Jy ! Component: 750 - total flux cleaned = 0.00460769 Jy ! Component: 800 - total flux cleaned = 0.00467061 Jy ! Component: 850 - total flux cleaned = 0.00483419 Jy ! Component: 900 - total flux cleaned = 0.0048743 Jy ! Component: 950 - total flux cleaned = 0.00503151 Jy ! Component: 1000 - total flux cleaned = 0.00508924 Jy ! Component: 1050 - total flux cleaned = 0.00518416 Jy ! Component: 1100 - total flux cleaned = 0.00538877 Jy ! Component: 1150 - total flux cleaned = 0.00549807 Jy ! Component: 1200 - total flux cleaned = 0.00562368 Jy ! Component: 1250 - total flux cleaned = 0.0057295 Jy ! Component: 1300 - total flux cleaned = 0.00590322 Jy ! Component: 1350 - total flux cleaned = 0.00603992 Jy ! Component: 1400 - total flux cleaned = 0.00610752 Jy ! Component: 1450 - total flux cleaned = 0.0062075 Jy ! Component: 1500 - total flux cleaned = 0.00637164 Jy ! Component: 1550 - total flux cleaned = 0.00646849 Jy ! Component: 1600 - total flux cleaned = 0.00656399 Jy ! Component: 1650 - total flux cleaned = 0.00665839 Jy ! Component: 1700 - total flux cleaned = 0.00679789 Jy ! Component: 1750 - total flux cleaned = 0.00690477 Jy ! Component: 1800 - total flux cleaned = 0.00696491 Jy ! Component: 1850 - total flux cleaned = 0.0070693 Jy ! Component: 1900 - total flux cleaned = 0.00715753 Jy ! Component: 1950 - total flux cleaned = 0.00725917 Jy ! Component: 2000 - total flux cleaned = 0.00731651 Jy ! Component: 2050 - total flux cleaned = 0.00737314 Jy ! Component: 2100 - total flux cleaned = 0.00744326 Jy ! Component: 2150 - total flux cleaned = 0.00749869 Jy ! Component: 2200 - total flux cleaned = 0.00751233 Jy ! Component: 2250 - total flux cleaned = 0.00756702 Jy ! Component: 2300 - total flux cleaned = 0.00762089 Jy ! Component: 2350 - total flux cleaned = 0.00767424 Jy ! Component: 2400 - total flux cleaned = 0.00772694 Jy ! Component: 2450 - total flux cleaned = 0.00774017 Jy ! Component: 2500 - total flux cleaned = 0.00781804 Jy ! Component: 2550 - total flux cleaned = 0.00783071 Jy ! Component: 2600 - total flux cleaned = 0.00781806 Jy ! Component: 2650 - total flux cleaned = 0.00786825 Jy ! Component: 2700 - total flux cleaned = 0.00788066 Jy ! Component: 2750 - total flux cleaned = 0.00791756 Jy ! Component: 2800 - total flux cleaned = 0.00791767 Jy ! Component: 2850 - total flux cleaned = 0.00794186 Jy ! Component: 2900 - total flux cleaned = 0.0079779 Jy ! Component: 2950 - total flux cleaned = 0.00797811 Jy ! Component: 3000 - total flux cleaned = 0.00801343 Jy ! Component: 3050 - total flux cleaned = 0.00804835 Jy ! Component: 3100 - total flux cleaned = 0.00803698 Jy ! Component: 3150 - total flux cleaned = 0.00807136 Jy ! Component: 3200 - total flux cleaned = 0.00811669 Jy ! Component: 3250 - total flux cleaned = 0.00810551 Jy ! Component: 3300 - total flux cleaned = 0.00813906 Jy ! Component: 3350 - total flux cleaned = 0.00816137 Jy ! Component: 3400 - total flux cleaned = 0.00818342 Jy ! Component: 3450 - total flux cleaned = 0.0082599 Jy ! Component: 3500 - total flux cleaned = 0.00828154 Jy ! Component: 3550 - total flux cleaned = 0.0082923 Jy ! Component: 3600 - total flux cleaned = 0.00834583 Jy ! Component: 3650 - total flux cleaned = 0.00839882 Jy ! Component: 3700 - total flux cleaned = 0.00840942 Jy ! Component: 3750 - total flux cleaned = 0.00847204 Jy ! Component: 3800 - total flux cleaned = 0.0085239 Jy ! Component: 3850 - total flux cleaned = 0.0085445 Jy ! Component: 3900 - total flux cleaned = 0.00860601 Jy ! Component: 3950 - total flux cleaned = 0.00868726 Jy ! Component: 4000 - total flux cleaned = 0.00871753 Jy ! Component: 4050 - total flux cleaned = 0.00878771 Jy ! Total flux subtracted in 4096 components = 0.00881749 Jy ! Clean residual min=-0.000497 max=0.000581 Jy/beam ! Clean residual mean=0.000000 rms=0.000164 Jy/beam ! Combined flux in latest and established models = 1.03566 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 425 components and 1.03566 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0132-1654_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8657 x 2.322 at -8.803 degrees (North through East) ! Clean map min=-0.0012164 max=0.8113 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0132-1654_X_map.fits wmodel /vlbi/bp222/maps//J0132-1654_X_map.mod ! Writing 425 model components to file: /vlbi/bp222/maps//J0132-1654_X_map.mod wobs /vlbi/bp222/maps//J0132-1654_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0132-1654_X_uvs.fits wwins /vlbi/bp222/maps//J0132-1654_X_map.win ! wwins: Wrote 8 windows to /vlbi/bp222/maps//J0132-1654_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.811297 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000163753 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.0605522 0.0605522 0.121104 0.242209 0.484417 0.968835 1.93767 3.87534 7.75068 15.5014 31.0027 62.0054 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.811 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 4954.4 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0132-1654_X_dfm.log closed on Thu Sep 27 10:38:19 2018