! Started logfile: /vlbi/bp222/maps//J0058-0539_X_dfm.log on Thu Sep 27 10:35:41 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.42800 obs /vlbi/bp222/maps//J0058-0539_X_uvm.fits ! Reading UV FITS file: /vlbi/bp222/maps//J0058-0539_X_uvm.fits ! AN table 1: 16 integrations on 45 of 45 possible baselines. ! AN table 2: 16 integrations on 28 of 28 possible baselines. ! AN table 3: 15 integrations on 28 of 28 possible baselines. ! AN table 4: 16 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.913721 visibilities/baseline/integration-bin. ! Found source: J0058-0539 ! ! There are 12 IFs, and a total of 12 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.428e+09 3.2e+07 1 3.2e+07 ! 02 2 8.46e+09 3.2e+07 1 3.2e+07 ! 03 3 8.492e+09 3.2e+07 1 3.2e+07 ! 04 4 8.524e+09 3.2e+07 1 3.2e+07 ! 05 5 8.588e+09 3.2e+07 1 3.2e+07 ! 06 6 8.62e+09 3.2e+07 1 3.2e+07 ! 07 7 8.684e+09 3.2e+07 1 3.2e+07 ! 08 8 8.716e+09 3.2e+07 1 3.2e+07 ! 09 9 8.78e+09 3.2e+07 1 3.2e+07 ! 10 10 8.812e+09 3.2e+07 1 3.2e+07 ! 11 11 8.844e+09 3.2e+07 1 3.2e+07 ! 12 12 8.876e+09 3.2e+07 1 3.2e+07 ! ! Polarization(s): RR ! ! Read 134 lines of history. ! ! Reading 21096 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 12 channels. ! Selecting polarization: RR, channels: 1..12 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: 5..5 ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 ! Reading IF 9 channels: 9..9 ! Reading IF 10 channels: 10..10 ! Reading IF 11 channels: 11..11 ! Reading IF 12 channels: 12..12 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0058-0539_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 5. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 6. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 7. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 8. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 9. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 10. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 11. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 12. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 11 telescope corrections were flagged in sub-array 2. ! A total of 5 telescope corrections were flagged in sub-array 3. ! A total of 10 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.043587Jy sigma=13.600703 ! Fit after self-cal, rms=0.739013Jy sigma=9.460862 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7334 mas, bmaj=1.889 mas, bpa=1.673 degrees ! Estimated noise=0.691031 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.182854 Jy ! Component: 100 - total flux cleaned = 0.24772 Jy ! Total flux subtracted in 100 components = 0.24772 Jy ! Clean residual min=-0.012742 max=0.031631 Jy/beam ! Clean residual mean=0.000022 rms=0.003371 Jy/beam ! Combined flux in latest and established models = 0.24772 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.24772 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.091330Jy sigma=1.165529 ! Fit after self-cal, rms=0.090931Jy sigma=1.161468 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0377943 Jy ! Component: 100 - total flux cleaned = 0.0598024 Jy ! Total flux subtracted in 100 components = 0.0598024 Jy ! Clean residual min=-0.007012 max=0.011385 Jy/beam ! Clean residual mean=0.000005 rms=0.001586 Jy/beam ! Combined flux in latest and established models = 0.307522 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 28 components and 0.307522 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.068502Jy sigma=0.816564 ! Fit after self-cal, rms=0.068334Jy sigma=0.814067 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0142324 Jy ! Component: 100 - total flux cleaned = 0.0230549 Jy ! Total flux subtracted in 100 components = 0.0230549 Jy ! Clean residual min=-0.005614 max=0.006321 Jy/beam ! Clean residual mean=-0.000001 rms=0.001076 Jy/beam ! Combined flux in latest and established models = 0.330577 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 34 components and 0.330577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.065070Jy sigma=0.755722 ! Fit after self-cal, rms=0.065053Jy sigma=0.755263 ! Inverting map ! Added new window around map position (1, -0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00659826 Jy ! Component: 100 - total flux cleaned = 0.0108155 Jy ! Total flux subtracted in 100 components = 0.0108155 Jy ! Clean residual min=-0.004958 max=0.004810 Jy/beam ! Clean residual mean=-0.000004 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.341392 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 40 components and 0.341392 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064650Jy sigma=0.746080 ! Fit after self-cal, rms=0.064629Jy sigma=0.745835 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.01 mas, bmaj=2.388 mas, bpa=0.5056 degrees ! Estimated noise=0.407461 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000728978 Jy ! Component: 100 - total flux cleaned = -0.00108075 Jy ! Component: 150 - total flux cleaned = -0.00147867 Jy ! Component: 200 - total flux cleaned = -0.0016282 Jy ! Total flux subtracted in 200 components = -0.0016282 Jy ! Clean residual min=-0.005178 max=0.003916 Jy/beam ! Clean residual mean=-0.000007 rms=0.000960 Jy/beam ! Combined flux in latest and established models = 0.339764 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.339764 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.064474Jy sigma=0.744060 ! Fit after self-cal, rms=0.064448Jy sigma=0.743866 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.01 x 2.388 at 0.5056 degrees (North through East) ! Clean map min=-0.0047869 max=0.25754 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.01 HN 1.00 KP 0.96 ! LA 0.98 MK 1.03 NL 0.99 OV 0.98 ! PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.05 FD 1.01 HN 0.98 KP 1.05 ! LA 1.01 NL 0.97 OV 1.01 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.02 KP 1.01 LA 1.00 ! NL 0.95 OV 1.05 PT 1.02 SC 1.12 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 0.99 HN 0.98 LA 1.01 ! NL 0.95 OV 1.03 PT 1.03 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.01 HN 0.98 KP 0.96 ! LA 0.99 MK 1.05 NL 0.99 OV 0.98 ! PT 0.98 SC 1.01 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.02 HN 0.98 KP 1.08 ! LA 1.01 NL 0.95 OV 1.02 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 KP 1.04 LA 0.97 ! NL 0.96 OV 1.04 PT 1.05 SC 1.02 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 1.00 HN 1.01 LA 0.97 ! NL 0.99 OV 1.04 PT 1.00 ! ! ! Correcting IF 3. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 1.02 KP 0.97 ! LA 0.97 MK 1.00 NL 1.01 OV 0.99 ! PT 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.98 HN 0.98 KP 1.09 ! LA 1.01 NL 0.96 OV 1.02 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 KP 1.01 LA 0.99 ! NL 0.92 OV 1.05 PT 1.06 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 0.99 HN 1.00 LA 1.01 ! NL 0.98 OV 1.01 PT 1.01 ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.04 HN 1.05 KP 0.96 ! LA 0.98 MK 1.00 NL 0.98 OV 0.98 ! PT 0.96 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 0.99 KP 1.06 ! LA 0.99 NL 0.95 OV 1.00 SC 0.99 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.03 KP 1.02 LA 0.99 ! NL 0.94 OV 1.04 PT 1.06 SC 1.11 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.99 FD 1.02 HN 1.01 LA 1.02 ! NL 0.99 OV 1.04 PT 1.02 ! ! ! Correcting IF 5. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.98 HN 1.00 KP 0.96 ! LA 1.00 MK 1.05 NL 0.97 OV 0.99 ! PT 0.99 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 FD 1.00 HN 0.97 KP 1.04 ! LA 1.03 NL 0.97 OV 1.04 SC 1.07 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 KP 1.04 LA 0.98 ! NL 0.95 OV 1.04 PT 1.04 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.01 HN 1.01 LA 1.02 ! NL 0.99 OV 1.01 PT 1.02 ! ! ! Correcting IF 6. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.96 FD 1.01 HN 1.01 KP 0.96 ! LA 0.98 MK 1.04 NL 0.98 OV 0.98 ! PT 0.97 SC 0.95 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.02 FD 0.99 HN 0.98 KP 1.09 ! LA 1.01 NL 0.93 OV 1.01 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.05 KP 1.02 LA 0.99 ! NL 0.93 OV 1.01 PT 1.08 SC 1.06 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 FD 0.98 HN 0.99 LA 0.99 ! NL 0.99 OV 1.02 PT 1.01 ! ! ! Correcting IF 7. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 1.00 HN 0.98 KP 0.98 ! LA 0.97 MK 1.01 NL 0.99 OV 1.01 ! PT 0.97 SC 0.97 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 0.99 HN 0.98 KP 1.06 ! LA 1.01 NL 0.97 OV 1.02 SC 0.96 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 1.03 KP 1.04 LA 0.98 ! NL 0.94 OV 1.03 PT 1.06 SC 0.98 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 1.00 HN 0.97 LA 0.98 ! NL 0.99 OV 1.02 PT 1.02 ! ! ! Correcting IF 8. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 1.01 KP 0.97 ! LA 0.97 MK 1.03 NL 1.00 OV 0.98 ! PT 0.97 SC 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 FD 1.05 HN 0.95 KP 1.09 ! LA 1.02 NL 0.94 OV 1.03 SC 1.04 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 1.03 KP 1.02 LA 0.99 ! NL 0.95 OV 1.05 PT 1.05 SC 1.09 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 FD 1.00 HN 0.97 LA 1.02 ! NL 0.99 OV 1.03 PT 1.00 ! ! ! Correcting IF 9. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.98 KP 0.98 ! LA 0.99 MK 1.02 NL 0.99 OV 0.99 ! PT 0.98 SC 0.96 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.97 FD 0.98 HN 0.98 KP 1.09 ! LA 1.03 NL 0.96 OV 1.03 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.05 KP 1.01 LA 0.98 ! NL 0.92 OV 1.04 PT 1.05 SC 1.01 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.99 HN 1.02 LA 1.06 ! NL 0.97 OV 0.99 PT 1.03 ! ! ! Correcting IF 10. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.02 HN 0.98 KP 0.95 ! LA 0.99 MK 1.03 NL 0.99 OV 1.00 ! PT 0.99 SC 0.98 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.04 FD 1.03 HN 1.02 KP 1.11 ! LA 0.99 NL 0.97 OV 1.02 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 1.07 KP 1.01 LA 0.98 ! NL 0.96 OV 1.02 PT 1.08 SC 1.07 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.05 FD 1.03 HN 0.99 LA 1.02 ! NL 0.98 OV 1.01 PT 0.98 ! ! ! Correcting IF 11. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.99 HN 1.01 KP 0.97 ! LA 1.00 MK 0.97 NL 1.01 OV 0.98 ! PT 0.97 SC 1.02 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 1.03 HN 1.02 KP 1.14 ! LA 0.98 NL 0.95 OV 1.03 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 1.03 KP 1.03 LA 0.97 ! NL 0.92 OV 1.05 PT 1.06 SC 0.99 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 1.03 HN 0.99 LA 1.01 ! NL 1.00 OV 1.04 PT 1.00 ! ! ! Correcting IF 12. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.99 HN 0.94 KP 0.94 ! LA 0.99 MK 0.99 NL 1.00 OV 0.99 ! PT 0.97 SC 1.04 ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.98 HN 0.99 KP 1.09 ! LA 1.03 NL 0.95 OV 1.02 SC 0.98 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.05 KP 1.00 LA 0.92 ! NL 0.94 OV 1.03 PT 1.09 SC 1.05 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.02 FD 0.99 HN 0.98 LA 1.02 ! NL 1.00 OV 1.04 PT 1.03 ! ! ! Fit before self-cal, rms=0.064448Jy sigma=0.743866 ! Fit after self-cal, rms=0.063905Jy sigma=0.724780 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.39 mas, bpa=0.5751 degrees ! Estimated noise=0.407235 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.4, -7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00338681 Jy ! Component: 100 - total flux cleaned = 0.00556032 Jy ! Component: 150 - total flux cleaned = 0.00656956 Jy ! Component: 200 - total flux cleaned = 0.00707656 Jy ! Total flux subtracted in 200 components = 0.00707656 Jy ! Clean residual min=-0.002264 max=0.002319 Jy/beam ! Clean residual mean=-0.000002 rms=0.000462 Jy/beam ! Combined flux in latest and established models = 0.346841 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 63 components and 0.346841 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063647Jy sigma=0.722023 ! Fit after self-cal, rms=0.063653Jy sigma=0.721792 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063653Jy sigma=0.721792 ! Fit after self-cal, rms=0.063682Jy sigma=0.721701 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.016 mas, bmaj=2.39 mas, bpa=0.5419 degrees ! Estimated noise=0.40736 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131597 Jy ! Component: 100 - total flux cleaned = 0.00170545 Jy ! Component: 150 - total flux cleaned = 0.00201319 Jy ! Component: 200 - total flux cleaned = 0.00225461 Jy ! Total flux subtracted in 200 components = 0.00225461 Jy ! Clean residual min=-0.002133 max=0.002180 Jy/beam ! Clean residual mean=-0.000002 rms=0.000433 Jy/beam ! Combined flux in latest and established models = 0.349095 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 74 components and 0.349095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063603Jy sigma=0.720903 ! Fit after self-cal, rms=0.063600Jy sigma=0.720853 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (17, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192951 Jy ! Component: 100 - total flux cleaned = 0.00238574 Jy ! Component: 150 - total flux cleaned = 0.00258142 Jy ! Component: 200 - total flux cleaned = 0.00275661 Jy ! Total flux subtracted in 200 components = 0.00275661 Jy ! Clean residual min=-0.001909 max=0.001693 Jy/beam ! Clean residual mean=-0.000002 rms=0.000398 Jy/beam ! Combined flux in latest and established models = 0.351852 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 91 components and 0.351852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063522Jy sigma=0.719880 ! Fit after self-cal, rms=0.063518Jy sigma=0.719825 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063518Jy sigma=0.719825 ! Fit after self-cal, rms=0.063557Jy sigma=0.719747 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.015 mas, bmaj=2.389 mas, bpa=0.4993 degrees ! Estimated noise=0.407353 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000535848 Jy ! Component: 100 - total flux cleaned = 0.000637344 Jy ! Component: 150 - total flux cleaned = 0.000762497 Jy ! Component: 200 - total flux cleaned = 0.000849534 Jy ! Total flux subtracted in 200 components = 0.000849534 Jy ! Clean residual min=-0.001855 max=0.001621 Jy/beam ! Clean residual mean=-0.000002 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.352702 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 93 components and 0.352702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063522Jy sigma=0.719362 ! Fit after self-cal, rms=0.063521Jy sigma=0.719338 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.56221e-05 Jy ! Component: 100 - total flux cleaned = 0.000139962 Jy ! Component: 150 - total flux cleaned = 0.000246813 Jy ! Component: 200 - total flux cleaned = 0.000322614 Jy ! Total flux subtracted in 200 components = 0.000322614 Jy ! Clean residual min=-0.001809 max=0.001570 Jy/beam ! Clean residual mean=-0.000002 rms=0.000375 Jy/beam ! Combined flux in latest and established models = 0.353024 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 100 components and 0.353024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063498Jy sigma=0.719077 ! Fit after self-cal, rms=0.063497Jy sigma=0.719062 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063497Jy sigma=0.719062 ! Fit after self-cal, rms=0.063499Jy sigma=0.719035 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=3.704 mas, bpa=-7.163 degrees ! Estimated noise=0.484555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000896918 Jy ! Component: 100 - total flux cleaned = 0.00137714 Jy ! Component: 150 - total flux cleaned = 0.00155251 Jy ! Component: 200 - total flux cleaned = 0.00167371 Jy ! Total flux subtracted in 200 components = 0.00167371 Jy ! Clean residual min=-0.001707 max=0.001422 Jy/beam ! Clean residual mean=-0.000002 rms=0.000414 Jy/beam ! Combined flux in latest and established models = 0.354698 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 0.354698 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063491Jy sigma=0.718933 ! Fit after self-cal, rms=0.063487Jy sigma=0.718911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.73038e-05 Jy ! Component: 100 - total flux cleaned = 0.00011786 Jy ! Component: 150 - total flux cleaned = 0.000157258 Jy ! Component: 200 - total flux cleaned = 0.000205412 Jy ! Total flux subtracted in 200 components = 0.000205412 Jy ! Clean residual min=-0.001718 max=0.001414 Jy/beam ! Clean residual mean=-0.000002 rms=0.000410 Jy/beam ! Combined flux in latest and established models = 0.354903 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 123 components and 0.354903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063481Jy sigma=0.718852 ! Fit after self-cal, rms=0.063479Jy sigma=0.718834 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.389 mas, bpa=0.4466 degrees ! Estimated noise=0.407246 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.014 x 2.389 at 0.4466 degrees (North through East) ! Clean map min=-0.0015335 max=0.25736 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7336 mas, bmaj=1.89 mas, bpa=1.55 degrees ! Estimated noise=0.688564 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.181892 Jy ! Component: 100 - total flux cleaned = 0.247935 Jy ! Component: 150 - total flux cleaned = 0.285086 Jy ! Component: 200 - total flux cleaned = 0.306554 Jy ! Total flux subtracted in 200 components = 0.306554 Jy ! Clean residual min=-0.006055 max=0.010821 Jy/beam ! Clean residual mean=0.000009 rms=0.001343 Jy/beam ! Combined flux in latest and established models = 0.306554 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.306554 Jy ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.389 mas, bpa=0.4466 degrees ! Estimated noise=0.407246 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0179581 Jy ! Component: 100 - total flux cleaned = 0.0266469 Jy ! Component: 150 - total flux cleaned = 0.0313961 Jy ! Component: 200 - total flux cleaned = 0.0347313 Jy ! Total flux subtracted in 200 components = 0.0347313 Jy ! Clean residual min=-0.002610 max=0.002266 Jy/beam ! Clean residual mean=0.000000 rms=0.000534 Jy/beam ! Combined flux in latest and established models = 0.341285 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 47 components and 0.341285 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.277 mas, bmaj=3.704 mas, bpa=-7.163 degrees ! Estimated noise=0.484555 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00307658 Jy ! Component: 100 - total flux cleaned = 0.00524757 Jy ! Component: 150 - total flux cleaned = 0.00695454 Jy ! Component: 200 - total flux cleaned = 0.0083296 Jy ! Total flux subtracted in 200 components = 0.0083296 Jy ! Clean residual min=-0.001928 max=0.001779 Jy/beam ! Clean residual mean=-0.000002 rms=0.000473 Jy/beam ! Combined flux in latest and established models = 0.349615 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00111892 Jy ! Component: 100 - total flux cleaned = 0.00203879 Jy ! Component: 150 - total flux cleaned = 0.002801 Jy ! Component: 200 - total flux cleaned = 0.00344341 Jy ! Total flux subtracted in 200 components = 0.00344341 Jy ! Clean residual min=-0.001738 max=0.001629 Jy/beam ! Clean residual mean=-0.000002 rms=0.000420 Jy/beam ! Combined flux in latest and established models = 0.353058 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 99 components and 0.353059 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.014 mas, bmaj=2.389 mas, bpa=0.4466 degrees ! Estimated noise=0.407246 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.20793e-05 Jy ! Component: 100 - total flux cleaned = 0.00014041 Jy ! Component: 150 - total flux cleaned = 0.000246824 Jy ! Component: 200 - total flux cleaned = 0.000298532 Jy ! Total flux subtracted in 200 components = 0.000298532 Jy ! Clean residual min=-0.001700 max=0.001765 Jy/beam ! Clean residual mean=-0.000002 rms=0.000385 Jy/beam ! Combined flux in latest and established models = 0.353357 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 116 components and 0.353357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Correcting IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Correcting IF 9. ! ! Correcting IF 10. ! ! Correcting IF 11. ! ! Correcting IF 12. ! ! Fit before self-cal, rms=0.063633Jy sigma=0.720465 ! Fit after self-cal, rms=0.063619Jy sigma=0.720335 wmodel J0058-0539_X_map.mod ! Writing 116 model components to file: J0058-0539_X_map.mod wobs J0058-0539_X_uvs.fits ! Writing UV FITS file: J0058-0539_X_uvs.fits wwins J0058-0539_X_map.win ! wwins: Wrote 4 windows to J0058-0539_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000155823 Jy ! Component: 100 - total flux cleaned = -0.000275841 Jy ! Component: 150 - total flux cleaned = -0.000414004 Jy ! Component: 200 - total flux cleaned = -0.000493566 Jy ! Component: 250 - total flux cleaned = -0.000570776 Jy ! Component: 300 - total flux cleaned = -0.000619974 Jy ! Component: 350 - total flux cleaned = -0.000620012 Jy ! Component: 400 - total flux cleaned = -0.000689957 Jy ! Component: 450 - total flux cleaned = -0.000803903 Jy ! Component: 500 - total flux cleaned = -0.000892913 Jy ! Component: 550 - total flux cleaned = -0.0010228 Jy ! Component: 600 - total flux cleaned = -0.00110751 Jy ! Component: 650 - total flux cleaned = -0.00112835 Jy ! Component: 700 - total flux cleaned = -0.00110887 Jy ! Component: 750 - total flux cleaned = -0.00116917 Jy ! Component: 800 - total flux cleaned = -0.00113033 Jy ! Component: 850 - total flux cleaned = -0.00114887 Jy ! Component: 900 - total flux cleaned = -0.0011112 Jy ! Component: 950 - total flux cleaned = -0.0011112 Jy ! Component: 1000 - total flux cleaned = -0.00111131 Jy ! Component: 1050 - total flux cleaned = -0.00103966 Jy ! Component: 1100 - total flux cleaned = -0.000986691 Jy ! Component: 1150 - total flux cleaned = -0.000864821 Jy ! Component: 1200 - total flux cleaned = -0.000761841 Jy ! Component: 1250 - total flux cleaned = -0.00074459 Jy ! Component: 1300 - total flux cleaned = -0.000744264 Jy ! Component: 1350 - total flux cleaned = -0.000711263 Jy ! Component: 1400 - total flux cleaned = -0.000678703 Jy ! Component: 1450 - total flux cleaned = -0.00067868 Jy ! Component: 1500 - total flux cleaned = -0.000662611 Jy ! Component: 1550 - total flux cleaned = -0.000567507 Jy ! Component: 1600 - total flux cleaned = -0.000599077 Jy ! Component: 1650 - total flux cleaned = -0.000552576 Jy ! Component: 1700 - total flux cleaned = -0.000506498 Jy ! Component: 1750 - total flux cleaned = -0.000567341 Jy ! Component: 1800 - total flux cleaned = -0.000492076 Jy ! Component: 1850 - total flux cleaned = -0.000477149 Jy ! Component: 1900 - total flux cleaned = -0.000462291 Jy ! Component: 1950 - total flux cleaned = -0.00037474 Jy ! Component: 2000 - total flux cleaned = -0.000389423 Jy ! Component: 2050 - total flux cleaned = -0.000432314 Jy ! Component: 2100 - total flux cleaned = -0.000332557 Jy ! Component: 2150 - total flux cleaned = -0.000389176 Jy ! Component: 2200 - total flux cleaned = -0.000375105 Jy ! Component: 2250 - total flux cleaned = -0.00034731 Jy ! Component: 2300 - total flux cleaned = -0.000319926 Jy ! Component: 2350 - total flux cleaned = -0.0003336 Jy ! Component: 2400 - total flux cleaned = -0.000293152 Jy ! Component: 2450 - total flux cleaned = -0.000319923 Jy ! Component: 2500 - total flux cleaned = -0.000280124 Jy ! Component: 2550 - total flux cleaned = -0.000306494 Jy ! Component: 2600 - total flux cleaned = -0.000319509 Jy ! Component: 2650 - total flux cleaned = -0.000280688 Jy ! Component: 2700 - total flux cleaned = -0.000319152 Jy ! Component: 2750 - total flux cleaned = -0.000280719 Jy ! Component: 2800 - total flux cleaned = -0.000268062 Jy ! Component: 2850 - total flux cleaned = -0.000305909 Jy ! Component: 2900 - total flux cleaned = -0.000293379 Jy ! Component: 2950 - total flux cleaned = -0.00029329 Jy ! Component: 3000 - total flux cleaned = -0.000317929 Jy ! Component: 3050 - total flux cleaned = -0.000281204 Jy ! Component: 3100 - total flux cleaned = -0.000317595 Jy ! Component: 3150 - total flux cleaned = -0.000305682 Jy ! Component: 3200 - total flux cleaned = -0.000317602 Jy ! Component: 3250 - total flux cleaned = -0.000329531 Jy ! Component: 3300 - total flux cleaned = -0.000317802 Jy ! Component: 3350 - total flux cleaned = -0.000329297 Jy ! Component: 3400 - total flux cleaned = -0.000306061 Jy ! Component: 3450 - total flux cleaned = -0.000340654 Jy ! Component: 3500 - total flux cleaned = -0.00032919 Jy ! Component: 3550 - total flux cleaned = -0.000340748 Jy ! Component: 3600 - total flux cleaned = -0.000363276 Jy ! Component: 3650 - total flux cleaned = -0.000352057 Jy ! Component: 3700 - total flux cleaned = -0.000385668 Jy ! Component: 3750 - total flux cleaned = -0.000418819 Jy ! Component: 3800 - total flux cleaned = -0.000440853 Jy ! Component: 3850 - total flux cleaned = -0.000408049 Jy ! Component: 3900 - total flux cleaned = -0.000418828 Jy ! Component: 3950 - total flux cleaned = -0.000440513 Jy ! Component: 4000 - total flux cleaned = -0.000472793 Jy ! Component: 4050 - total flux cleaned = -0.000504811 Jy ! Total flux subtracted in 4096 components = -0.000504886 Jy ! Clean residual min=-0.000572 max=0.000544 Jy/beam ! Clean residual mean=0.000000 rms=0.000181 Jy/beam ! Combined flux in latest and established models = 0.352852 Jy keep ! Adding 270 model components to the UV plane model. ! The established model now contains 384 components and 0.352852 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /vlbi/bp222/maps//J0058-0539_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.014 x 2.389 at 0.4466 degrees (North through East) ! Clean map min=-0.0014598 max=0.25698 Jy/beam ! Writing clean map to FITS file: /vlbi/bp222/maps//J0058-0539_X_map.fits wmodel /vlbi/bp222/maps//J0058-0539_X_map.mod ! Writing 384 model components to file: /vlbi/bp222/maps//J0058-0539_X_map.mod wobs /vlbi/bp222/maps//J0058-0539_X_uvs.fits ! Writing UV FITS file: /vlbi/bp222/maps//J0058-0539_X_uvs.fits wwins /vlbi/bp222/maps//J0058-0539_X_map.win ! wwins: Wrote 5 windows to /vlbi/bp222/maps//J0058-0539_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.256977 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000180062 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.210208 0.210208 0.420416 0.840831 1.68166 3.36333 6.72665 13.4533 26.9066 53.8132 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.256 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1427.16 quit ! Quitting program ! Log file /vlbi/bp222/maps//J0058-0539_X_dfm.log closed on Thu Sep 27 10:35:46 2018