! Started logfile: /scr/pima/gc030_uvs/J2130+3332_S_uvs.log on Fri Apr 22 07:58:29 2016
obs /scr/pima/gc030_uvs/J2130+3332_S_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J2130+3332_S_uva.fits
! AN table 1: 70 integrations on 15 of 15 possible baselines.
! AN table 2: 209 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.712692 visibilities/baseline/integration-bin.
! Found source: J2130+3332
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22724e+09        8e+06          1        8e+06
!  02        2  2.23499e+09        8e+06          1        8e+06
!  03        3  2.24324e+09        8e+06          1        8e+06
!  04        4  2.25099e+09        8e+06          1        8e+06
!  05        5  2.25924e+09        8e+06          1        8e+06
!  06        6  2.26699e+09        8e+06          1        8e+06
!  07        7  2.27524e+09        8e+06          1        8e+06
!  08        8  2.28299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 39352 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J2130+3332_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 232 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.011454Jy  sigma=8.521499
! Fit after  self-cal, rms=0.898777Jy  sigma=7.645183
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.969 mas, bmaj=4.392 mas, bpa=-8.851 degrees
! Estimated noise=1.16414 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0712887 Jy
! Component: 100  -  total flux cleaned = 0.092493 Jy
! Total flux subtracted in 100 components = 0.092493 Jy
! Clean residual min=-0.005883 max=0.010416 Jy/beam
! Clean residual mean=0.000048 rms=0.001592 Jy/beam
! Combined flux in latest and established models = 0.092493 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.092493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104725Jy  sigma=0.729897
! Fit after  self-cal, rms=0.103178Jy  sigma=0.724268
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0130664 Jy
! Component: 100  -  total flux cleaned = 0.0206996 Jy
! Total flux subtracted in 100 components = 0.0206996 Jy
! Clean residual min=-0.004574 max=0.005059 Jy/beam
! Clean residual mean=0.000028 rms=0.001135 Jy/beam
! Combined flux in latest and established models = 0.113193 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.113193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.100387Jy  sigma=0.700892
! Fit after  self-cal, rms=0.099707Jy  sigma=0.700201
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.554 mas, bmaj=4.78 mas, bpa=-9.542 degrees
! Estimated noise=0.48565 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00778996 Jy
! Component: 100  -  total flux cleaned = 0.0111772 Jy
! Component: 150  -  total flux cleaned = 0.0130333 Jy
! Component: 200  -  total flux cleaned = 0.0140963 Jy
! Total flux subtracted in 200 components = 0.0140963 Jy
! Clean residual min=-0.002379 max=0.002505 Jy/beam
! Clean residual mean=0.000065 rms=0.000588 Jy/beam
! Combined flux in latest and established models = 0.127289 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 27 components and 0.127289 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099178Jy  sigma=0.695173
! Fit after  self-cal, rms=0.098830Jy  sigma=0.694883
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.554 x 4.78 at -9.542 degrees (North through East)
! Clean map  min=-0.0022111  max=0.10294 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     KP        0.86     LA        1.06     MK        0.96     
!   OV        1.01     PT        1.01     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     EB        1.07     HN        0.96     KP        0.95     
!   LA        0.96     NL        1.00     PT        1.01     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     KP        0.90     LA        1.07     MK        0.96     
!   OV        1.04     PT        0.94     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     EB        1.06     HN        0.92     KP        0.96     
!   LA        0.95     NL        0.99     PT        1.04     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     KP        0.93     LA        1.02     MK        0.94     
!   OV        0.99     PT        0.99     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     EB        1.09     HN        0.99     KP        0.98     
!   LA        0.93     NL        1.03     PT        0.99     SC        0.93     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     KP        1.00     LA        1.01     MK        1.03     
!   OV        0.94     PT        1.04     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     EB        1.04     HN        0.99     KP        0.96     
!   LA        0.91     NL        0.98     PT        1.05     SC        1.06     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     KP        0.93     LA        1.01     MK        0.97     
!   OV        1.05     PT        0.99     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     EB        1.03     HN        0.95     KP        1.00     
!   LA        0.98     NL        1.00     PT        0.99     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     EB        1.09     HN        0.90     KP        0.96     
!   LA        0.93     NL        1.03     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     KP        1.00     LA        1.05     MK        0.91     
!   OV        1.11     PT        0.96     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     EB        1.06     HN        0.95     KP        1.01     
!   LA        0.90     NL        1.04     PT        1.02     SC        0.98     
! 
! 
! Fit before self-cal, rms=0.098830Jy  sigma=0.694883
! Fit after  self-cal, rms=0.096338Jy  sigma=0.692504
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.594 mas, bmaj=4.797 mas, bpa=-9.62 degrees
! Estimated noise=0.485351 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000767957 Jy
! Component: 100  -  total flux cleaned = -0.000899221 Jy
! Component: 150  -  total flux cleaned = -0.000924228 Jy
! Component: 200  -  total flux cleaned = -0.000934226 Jy
! Total flux subtracted in 200 components = -0.000934226 Jy
! Clean residual min=-0.001742 max=0.001942 Jy/beam
! Clean residual mean=0.000027 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.126355 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 39 components and 0.126355 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096323Jy  sigma=0.692480
! Fit after  self-cal, rms=0.096177Jy  sigma=0.692342
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096177Jy  sigma=0.692342
! Fit after  self-cal, rms=0.096113Jy  sigma=0.691231
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.605 mas, bmaj=4.797 mas, bpa=-9.605 degrees
! Estimated noise=0.484378 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000473739 Jy
! Component: 100  -  total flux cleaned = -0.000473759 Jy
! Component: 150  -  total flux cleaned = -0.000462932 Jy
! Component: 200  -  total flux cleaned = -0.000436866 Jy
! Total flux subtracted in 200 components = -0.000436866 Jy
! Clean residual min=-0.001564 max=0.001835 Jy/beam
! Clean residual mean=0.000023 rms=0.000388 Jy/beam
! Combined flux in latest and established models = 0.125918 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.125918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096106Jy  sigma=0.691217
! Fit after  self-cal, rms=0.096182Jy  sigma=0.691118
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (7, 62).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00171105 Jy
! Component: 100  -  total flux cleaned = 0.00262097 Jy
! Component: 150  -  total flux cleaned = 0.00295905 Jy
! Component: 200  -  total flux cleaned = 0.00318584 Jy
! Total flux subtracted in 200 components = 0.00318584 Jy
! Clean residual min=-0.001409 max=0.001359 Jy/beam
! Clean residual mean=-0.000001 rms=0.000328 Jy/beam
! Combined flux in latest and established models = 0.129104 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 70 components and 0.129104 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096148Jy  sigma=0.690819
! Fit after  self-cal, rms=0.096165Jy  sigma=0.690774
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096165Jy  sigma=0.690774
! Fit after  self-cal, rms=0.096195Jy  sigma=0.690722
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.607 mas, bmaj=4.796 mas, bpa=-9.636 degrees
! Estimated noise=0.484136 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000806017 Jy
! Component: 100  -  total flux cleaned = 0.000984283 Jy
! Component: 150  -  total flux cleaned = 0.00105646 Jy
! Component: 200  -  total flux cleaned = 0.00110223 Jy
! Total flux subtracted in 200 components = 0.00110223 Jy
! Clean residual min=-0.001304 max=0.001274 Jy/beam
! Clean residual mean=-0.000000 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.130206 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.130206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096184Jy  sigma=0.690644
! Fit after  self-cal, rms=0.096202Jy  sigma=0.690629
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000247027 Jy
! Component: 100  -  total flux cleaned = 0.000260491 Jy
! Component: 150  -  total flux cleaned = 0.000312064 Jy
! Component: 200  -  total flux cleaned = 0.000347504 Jy
! Total flux subtracted in 200 components = 0.000347504 Jy
! Clean residual min=-0.001286 max=0.001222 Jy/beam
! Clean residual mean=-0.000002 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.130553 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 77 components and 0.130553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096197Jy  sigma=0.690599
! Fit after  self-cal, rms=0.096203Jy  sigma=0.690597
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096203Jy  sigma=0.690597
! Fit after  self-cal, rms=0.096145Jy  sigma=0.690567
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.952 mas, bmaj=9.374 mas, bpa=69.29 degrees
! Estimated noise=0.694701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000516299 Jy
! Component: 100  -  total flux cleaned = 0.000592404 Jy
! Component: 150  -  total flux cleaned = 0.00058339 Jy
! Component: 200  -  total flux cleaned = 0.000600004 Jy
! Total flux subtracted in 200 components = 0.000600004 Jy
! Clean residual min=-0.001152 max=0.001252 Jy/beam
! Clean residual mean=0.000001 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.131153 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 88 components and 0.131153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096143Jy  sigma=0.690583
! Fit after  self-cal, rms=0.096144Jy  sigma=0.690574
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109317 Jy
! Component: 100  -  total flux cleaned = 0.000108636 Jy
! Component: 150  -  total flux cleaned = 0.00010827 Jy
! Component: 200  -  total flux cleaned = 0.00010834 Jy
! Total flux subtracted in 200 components = 0.00010834 Jy
! Clean residual min=-0.001114 max=0.001189 Jy/beam
! Clean residual mean=-0.000002 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.131262 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 91 components and 0.131262 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096143Jy  sigma=0.690584
! Fit after  self-cal, rms=0.096145Jy  sigma=0.690584
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=4.795 mas, bpa=-9.654 degrees
! Estimated noise=0.483947 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.609 x 4.795 at -9.654 degrees (North through East)
! Clean map  min=-0.0010861  max=0.10215 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.999 mas, bmaj=4.402 mas, bpa=-8.967 degrees
! Estimated noise=1.18628 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0714547 Jy
! Component: 100  -  total flux cleaned = 0.0933063 Jy
! Component: 150  -  total flux cleaned = 0.105526 Jy
! Component: 200  -  total flux cleaned = 0.112713 Jy
! Total flux subtracted in 200 components = 0.112713 Jy
! Clean residual min=-0.004420 max=0.004903 Jy/beam
! Clean residual mean=0.000026 rms=0.001125 Jy/beam
! Combined flux in latest and established models = 0.112713 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.112713 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=4.795 mas, bpa=-9.654 degrees
! Estimated noise=0.483947 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667451 Jy
! Component: 100  -  total flux cleaned = 0.00991626 Jy
! Component: 150  -  total flux cleaned = 0.012059 Jy
! Component: 200  -  total flux cleaned = 0.013631 Jy
! Total flux subtracted in 200 components = 0.013631 Jy
! Clean residual min=-0.001482 max=0.001580 Jy/beam
! Clean residual mean=0.000038 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.126344 Jy
! Adding 28 model components to the UV plane model.
! The established model now contains 39 components and 0.126344 Jy
! Inverting map 
! Added new window around map position (-3.5, -82.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00145935 Jy
! Component: 100  -  total flux cleaned = 0.0024913 Jy
! Component: 150  -  total flux cleaned = 0.00300826 Jy
! Component: 200  -  total flux cleaned = 0.00327923 Jy
! Total flux subtracted in 200 components = 0.00327923 Jy
! Clean residual min=-0.001373 max=0.001162 Jy/beam
! Clean residual mean=0.000011 rms=0.000302 Jy/beam
! Combined flux in latest and established models = 0.129624 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 62 components and 0.129624 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.952 mas, bmaj=9.374 mas, bpa=69.29 degrees
! Estimated noise=0.694701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00109864 Jy
! Component: 100  -  total flux cleaned = 0.00139912 Jy
! Component: 150  -  total flux cleaned = 0.00162343 Jy
! Component: 200  -  total flux cleaned = 0.00168999 Jy
! Total flux subtracted in 200 components = 0.00168999 Jy
! Clean residual min=-0.001177 max=0.001165 Jy/beam
! Clean residual mean=-0.000003 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.131314 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1796e-06 Jy
! Component: 100  -  total flux cleaned = -1.0821e-05 Jy
! Component: 150  -  total flux cleaned = -1.06251e-05 Jy
! Component: 200  -  total flux cleaned = -2.1134e-05 Jy
! Total flux subtracted in 200 components = -2.1134e-05 Jy
! Clean residual min=-0.001141 max=0.001124 Jy/beam
! Clean residual mean=-0.000003 rms=0.000287 Jy/beam
! Combined flux in latest and established models = 0.131293 Jy
! Adding 23 model components to the UV plane model.
! The established model now contains 82 components and 0.131293 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.609 mas, bmaj=4.795 mas, bpa=-9.654 degrees
! Estimated noise=0.483947 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000394934 Jy
! Component: 100  -  total flux cleaned = -0.000372675 Jy
! Component: 150  -  total flux cleaned = -0.000314493 Jy
! Component: 200  -  total flux cleaned = -0.000296704 Jy
! Total flux subtracted in 200 components = -0.000296704 Jy
! Clean residual min=-0.001228 max=0.001100 Jy/beam
! Clean residual mean=0.000001 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.130996 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 91 components and 0.130996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096127Jy  sigma=0.690500
! Fit after  self-cal, rms=0.096149Jy  sigma=0.690478
wmodel /scr/pima/gc030_uvs/J2130+3332_S_map.mod
! Writing 91 model components to file: /scr/pima/gc030_uvs/J2130+3332_S_map.mod
wobs /scr/pima/gc030_uvs/J2130+3332_S_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J2130+3332_S_uvs.fits
wwins /scr/pima/gc030_uvs/J2130+3332_S_map.win
! wwins: Wrote 3 windows to /scr/pima/gc030_uvs/J2130+3332_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000301155 Jy
! Component: 100  -  total flux cleaned = -0.000476609 Jy
! Component: 150  -  total flux cleaned = -0.000567711 Jy
! Component: 200  -  total flux cleaned = -0.000567077 Jy
! Component: 250  -  total flux cleaned = -0.000550562 Jy
! Component: 300  -  total flux cleaned = -0.000567524 Jy
! Component: 350  -  total flux cleaned = -0.000536176 Jy
! Component: 400  -  total flux cleaned = -0.00044481 Jy
! Component: 450  -  total flux cleaned = -0.000400541 Jy
! Component: 500  -  total flux cleaned = -0.000357549 Jy
! Component: 550  -  total flux cleaned = -0.000343739 Jy
! Component: 600  -  total flux cleaned = -0.000302597 Jy
! Component: 650  -  total flux cleaned = -0.000262378 Jy
! Component: 700  -  total flux cleaned = -0.000249255 Jy
! Component: 750  -  total flux cleaned = -0.00022346 Jy
! Component: 800  -  total flux cleaned = -0.000236018 Jy
! Component: 850  -  total flux cleaned = -0.000223599 Jy
! Component: 900  -  total flux cleaned = -0.000186838 Jy
! Component: 950  -  total flux cleaned = -0.000103143 Jy
! Component: 1000  -  total flux cleaned = -7.97389e-05 Jy
! Component: 1050  -  total flux cleaned = -4.49356e-05 Jy
! Component: 1100  -  total flux cleaned = 2.33886e-05 Jy
! Component: 1150  -  total flux cleaned = 7.94559e-05 Jy
! Component: 1200  -  total flux cleaned = 0.000167497 Jy
! Component: 1250  -  total flux cleaned = 0.000210724 Jy
! Component: 1300  -  total flux cleaned = 0.000264115 Jy
! Component: 1350  -  total flux cleaned = 0.000327464 Jy
! Component: 1400  -  total flux cleaned = 0.000358706 Jy
! Component: 1450  -  total flux cleaned = 0.000399933 Jy
! Component: 1500  -  total flux cleaned = 0.000440698 Jy
! Component: 1550  -  total flux cleaned = 0.000470836 Jy
! Component: 1600  -  total flux cleaned = 0.000520514 Jy
! Component: 1650  -  total flux cleaned = 0.000549867 Jy
! Component: 1700  -  total flux cleaned = 0.000578913 Jy
! Component: 1750  -  total flux cleaned = 0.000607603 Jy
! Component: 1800  -  total flux cleaned = 0.000654961 Jy
! Component: 1850  -  total flux cleaned = 0.00070159 Jy
! Component: 1900  -  total flux cleaned = 0.00070143 Jy
! Component: 1950  -  total flux cleaned = 0.000738066 Jy
! Component: 2000  -  total flux cleaned = 0.000801347 Jy
! Component: 2050  -  total flux cleaned = 0.000854951 Jy
! Component: 2100  -  total flux cleaned = 0.00088125 Jy
! Component: 2150  -  total flux cleaned = 0.000925013 Jy
! Component: 2200  -  total flux cleaned = 0.000925027 Jy
! Component: 2250  -  total flux cleaned = 0.00098528 Jy
! Component: 2300  -  total flux cleaned = 0.00101933 Jy
! Component: 2350  -  total flux cleaned = 0.00105295 Jy
! Component: 2400  -  total flux cleaned = 0.00106125 Jy
! Component: 2450  -  total flux cleaned = 0.00106126 Jy
! Component: 2500  -  total flux cleaned = 0.00109418 Jy
! Component: 2550  -  total flux cleaned = 0.00111858 Jy
! Component: 2600  -  total flux cleaned = 0.00115882 Jy
! Component: 2650  -  total flux cleaned = 0.00115081 Jy
! Component: 2700  -  total flux cleaned = 0.00119037 Jy
! Component: 2750  -  total flux cleaned = 0.00119031 Jy
! Component: 2800  -  total flux cleaned = 0.00121369 Jy
! Component: 2850  -  total flux cleaned = 0.00122138 Jy
! Component: 2900  -  total flux cleaned = 0.0012059 Jy
! Component: 2950  -  total flux cleaned = 0.00125173 Jy
! Component: 3000  -  total flux cleaned = 0.00128969 Jy
! Component: 3050  -  total flux cleaned = 0.0012896 Jy
! Component: 3100  -  total flux cleaned = 0.00131954 Jy
! Component: 3150  -  total flux cleaned = 0.00136416 Jy
! Component: 3200  -  total flux cleaned = 0.00137154 Jy
! Component: 3250  -  total flux cleaned = 0.00140097 Jy
! Component: 3300  -  total flux cleaned = 0.00141553 Jy
! Component: 3350  -  total flux cleaned = 0.00144458 Jy
! Component: 3400  -  total flux cleaned = 0.00145174 Jy
! Component: 3450  -  total flux cleaned = 0.00146612 Jy
! Component: 3500  -  total flux cleaned = 0.00147326 Jy
! Component: 3550  -  total flux cleaned = 0.00153003 Jy
! Component: 3600  -  total flux cleaned = 0.00154413 Jy
! Component: 3650  -  total flux cleaned = 0.00157221 Jy
! Component: 3700  -  total flux cleaned = 0.00160018 Jy
! Component: 3750  -  total flux cleaned = 0.00162098 Jy
! Component: 3800  -  total flux cleaned = 0.00165553 Jy
! Component: 3850  -  total flux cleaned = 0.0016762 Jy
! Component: 3900  -  total flux cleaned = 0.00169666 Jy
! Component: 3950  -  total flux cleaned = 0.00171027 Jy
! Component: 4000  -  total flux cleaned = 0.00172386 Jy
! Component: 4050  -  total flux cleaned = 0.00176427 Jy
! Total flux subtracted in 4096 components = 0.00178444 Jy
! Clean residual min=-0.000449 max=0.000416 Jy/beam
! Clean residual mean=0.000003 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.13278 Jy
keep
! Adding 265 model components to the UV plane model.
! The established model now contains 356 components and 0.13278 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J2130+3332_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.609 x 4.795 at -9.654 degrees (North through East)
! Clean map  min=-0.00077317  max=0.10205 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J2130+3332_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.102053 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00011022 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.324009 0.324009 0.648019 1.29604 2.59207 5.18415 10.3683 20.7366 41.4732 82.9464
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.102 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  925.899 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J2130+3332_S_uvs.log closed on Fri Apr 22 07:58:36 2016