! Started logfile: /scr/pima/gc030_uvs/J1813+3144_X_uvs.log on Fri Apr 22 08:52:53 2016
obs /scr/pima/gc030_uvs/J1813+3144_X_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J1813+3144_X_uva.fits
! AN table 1: 70 integrations on 28 of 28 possible baselines.
! AN table 2: 139 integrations on 15 of 15 possible baselines.
! AN table 3: 70 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.822814 visibilities/baseline/integration-bin.
! Found source: J1813+3144
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.37724e+09        8e+06          1        8e+06
!  02        2  8.38499e+09        8e+06          1        8e+06
!  03        3  8.39324e+09        8e+06          1        8e+06
!  04        4  8.40099e+09        8e+06          1        8e+06
!  05        5  8.40924e+09        8e+06          1        8e+06
!  06        6  8.41699e+09        8e+06          1        8e+06
!  07        7  8.42524e+09        8e+06          1        8e+06
!  08        8  8.43299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 39528 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J1813+3144_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 71 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 85 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 110 telescope corrections were flagged in sub-array 2.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.008043Jy  sigma=13.552308
! Fit after  self-cal, rms=0.940518Jy  sigma=12.765568
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5219 mas, bmaj=1.304 mas, bpa=0.2209 degrees
! Estimated noise=1.0651 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0497591 Jy
! Component: 100  -  total flux cleaned = 0.061493 Jy
! Total flux subtracted in 100 components = 0.061493 Jy
! Clean residual min=-0.007357 max=0.007135 Jy/beam
! Clean residual mean=-0.000001 rms=0.001676 Jy/beam
! Combined flux in latest and established models = 0.061493 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.061493 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105366Jy  sigma=0.725634
! Fit after  self-cal, rms=0.104573Jy  sigma=0.720882
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6411 mas, bmaj=1.446 mas, bpa=0.2511 degrees
! Estimated noise=0.385013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00562519 Jy
! Component: 100  -  total flux cleaned = 0.00806638 Jy
! Component: 150  -  total flux cleaned = 0.00911367 Jy
! Component: 200  -  total flux cleaned = 0.00923335 Jy
! Total flux subtracted in 200 components = 0.00923335 Jy
! Clean residual min=-0.006123 max=0.004728 Jy/beam
! Clean residual mean=-0.000009 rms=0.001237 Jy/beam
! Combined flux in latest and established models = 0.0707264 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 13 components and 0.0707264 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104392Jy  sigma=0.715325
! Fit after  self-cal, rms=0.104212Jy  sigma=0.715088
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6411 x 1.446 at 0.2511 degrees (North through East)
! Clean map  min=-0.0056674  max=0.064455 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    HN        1.00*    KP        1.00*    LA        1.00*    
!   NL        1.00*    OV        1.00*    PT        1.00*    SC        1.00*    
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.104212Jy  sigma=0.715088
! Fit after  self-cal, rms=0.104097Jy  sigma=0.715247
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6407 mas, bmaj=1.449 mas, bpa=0.2636 degrees
! Estimated noise=0.385179 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00050372 Jy
! Component: 100  -  total flux cleaned = 0.000601031 Jy
! Component: 150  -  total flux cleaned = 0.000711148 Jy
! Component: 200  -  total flux cleaned = 0.000759803 Jy
! Total flux subtracted in 200 components = 0.000759803 Jy
! Clean residual min=-0.006162 max=0.004711 Jy/beam
! Clean residual mean=-0.000010 rms=0.001213 Jy/beam
! Combined flux in latest and established models = 0.0714862 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 14 components and 0.0714862 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104099Jy  sigma=0.714748
! Fit after  self-cal, rms=0.104086Jy  sigma=0.714722
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104086Jy  sigma=0.714722
! Fit after  self-cal, rms=0.104086Jy  sigma=0.714722
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6407 mas, bmaj=1.449 mas, bpa=0.2636 degrees
! Estimated noise=0.385179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.71565e-06 Jy
! Component: 100  -  total flux cleaned = 6.96693e-05 Jy
! Component: 150  -  total flux cleaned = 0.000107633 Jy
! Component: 200  -  total flux cleaned = 0.000107463 Jy
! Total flux subtracted in 200 components = 0.000107463 Jy
! Clean residual min=-0.006156 max=0.004726 Jy/beam
! Clean residual mean=-0.000010 rms=0.001207 Jy/beam
! Combined flux in latest and established models = 0.0715936 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 19 components and 0.0715936 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104085Jy  sigma=0.714539
! Fit after  self-cal, rms=0.104080Jy  sigma=0.714532
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.0429e-05 Jy
! Component: 100  -  total flux cleaned = -3.23321e-05 Jy
! Component: 150  -  total flux cleaned = -3.20349e-05 Jy
! Component: 200  -  total flux cleaned = -3.25168e-05 Jy
! Total flux subtracted in 200 components = -3.25168e-05 Jy
! Clean residual min=-0.006144 max=0.004738 Jy/beam
! Clean residual mean=-0.000010 rms=0.001203 Jy/beam
! Combined flux in latest and established models = 0.0715611 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 20 components and 0.0715611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104076Jy  sigma=0.714388
! Fit after  self-cal, rms=0.104072Jy  sigma=0.714384
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104072Jy  sigma=0.714384
! Fit after  self-cal, rms=0.104072Jy  sigma=0.714384
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6407 mas, bmaj=1.449 mas, bpa=0.2636 degrees
! Estimated noise=0.385179 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.12084e-05 Jy
! Component: 100  -  total flux cleaned = -4.62198e-06 Jy
! Component: 150  -  total flux cleaned = -4.81574e-06 Jy
! Component: 200  -  total flux cleaned = 1.11286e-05 Jy
! Total flux subtracted in 200 components = 1.11286e-05 Jy
! Clean residual min=-0.006142 max=0.004738 Jy/beam
! Clean residual mean=-0.000010 rms=0.001200 Jy/beam
! Combined flux in latest and established models = 0.0715722 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 20 components and 0.0715722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104068Jy  sigma=0.714278
! Fit after  self-cal, rms=0.104067Jy  sigma=0.714277
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.89912e-05 Jy
! Component: 100  -  total flux cleaned = -1.89919e-05 Jy
! Component: 150  -  total flux cleaned = -3.41674e-06 Jy
! Component: 200  -  total flux cleaned = -3.19677e-06 Jy
! Total flux subtracted in 200 components = -3.19677e-06 Jy
! Clean residual min=-0.006137 max=0.004742 Jy/beam
! Clean residual mean=-0.000010 rms=0.001197 Jy/beam
! Combined flux in latest and established models = 0.071569 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 21 components and 0.071569 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104062Jy  sigma=0.714180
! Fit after  self-cal, rms=0.104062Jy  sigma=0.714180
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.104062Jy  sigma=0.714180
! Fit after  self-cal, rms=0.105069Jy  sigma=0.713125
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.756 mas, bmaj=3.044 mas, bpa=50.1 degrees
! Estimated noise=0.635773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00211558 Jy
! Component: 100  -  total flux cleaned = 0.00226048 Jy
! Component: 150  -  total flux cleaned = 0.00234922 Jy
! Component: 200  -  total flux cleaned = 0.00247308 Jy
! Total flux subtracted in 200 components = 0.00247308 Jy
! Clean residual min=-0.006864 max=0.006143 Jy/beam
! Clean residual mean=-0.000022 rms=0.002004 Jy/beam
! Combined flux in latest and established models = 0.0740421 Jy
selfcal
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 22 components and 0.0740421 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105125Jy  sigma=0.714871
! Fit after  self-cal, rms=0.105139Jy  sigma=0.714575
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000498051 Jy
! Component: 100  -  total flux cleaned = 0.000613893 Jy
! Component: 150  -  total flux cleaned = 0.000684686 Jy
! Component: 200  -  total flux cleaned = 0.000752478 Jy
! Total flux subtracted in 200 components = 0.000752478 Jy
! Clean residual min=-0.006791 max=0.006040 Jy/beam
! Clean residual mean=-0.000023 rms=0.001993 Jy/beam
! Combined flux in latest and established models = 0.0747946 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 22 components and 0.0747946 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105199Jy  sigma=0.717342
! Fit after  self-cal, rms=0.105179Jy  sigma=0.717181
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.6395 mas, bmaj=1.459 mas, bpa=0.3362 degrees
! Estimated noise=0.389321 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6395 x 1.459 at 0.3362 degrees (North through East)
! Clean map  min=-0.0053545  max=0.064282 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5205 mas, bmaj=1.314 mas, bpa=0.3329 degrees
! Estimated noise=1.0612 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0500592 Jy
! Component: 100  -  total flux cleaned = 0.0624168 Jy
! Component: 150  -  total flux cleaned = 0.0681305 Jy
! Component: 200  -  total flux cleaned = 0.0699122 Jy
! Total flux subtracted in 200 components = 0.0699122 Jy
! Clean residual min=-0.005841 max=0.005987 Jy/beam
! Clean residual mean=-0.000001 rms=0.001443 Jy/beam
! Combined flux in latest and established models = 0.0699122 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0699122 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.6395 mas, bmaj=1.459 mas, bpa=0.3362 degrees
! Estimated noise=0.389321 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168519 Jy
! Component: 100  -  total flux cleaned = 0.00232319 Jy
! Component: 150  -  total flux cleaned = 0.00250113 Jy
! Component: 200  -  total flux cleaned = 0.00260434 Jy
! Total flux subtracted in 200 components = 0.00260434 Jy
! Clean residual min=-0.005896 max=0.004626 Jy/beam
! Clean residual mean=-0.000011 rms=0.001173 Jy/beam
! Combined flux in latest and established models = 0.0725166 Jy
! Adding 7 model components to the UV plane model.
! The established model now contains 13 components and 0.0725166 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.756 mas, bmaj=3.044 mas, bpa=50.1 degrees
! Estimated noise=0.635773 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00178339 Jy
! Component: 100  -  total flux cleaned = 0.00189475 Jy
! Component: 150  -  total flux cleaned = 0.00199829 Jy
! Component: 200  -  total flux cleaned = 0.00214134 Jy
! Total flux subtracted in 200 components = 0.00214134 Jy
! Clean residual min=-0.006860 max=0.006186 Jy/beam
! Clean residual mean=-0.000026 rms=0.002019 Jy/beam
! Combined flux in latest and established models = 0.0746579 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.8726e-05 Jy
! Component: 100  -  total flux cleaned = 0.000211973 Jy
! Component: 150  -  total flux cleaned = 0.000289354 Jy
! Component: 200  -  total flux cleaned = 0.000362751 Jy
! Total flux subtracted in 200 components = 0.000362751 Jy
! Clean residual min=-0.006799 max=0.006053 Jy/beam
! Clean residual mean=-0.000025 rms=0.001998 Jy/beam
! Combined flux in latest and established models = 0.0750207 Jy
! Adding 5 model components to the UV plane model.
! The established model now contains 15 components and 0.0750207 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.6395 mas, bmaj=1.459 mas, bpa=0.3362 degrees
! Estimated noise=0.389321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00167915 Jy
! Component: 100  -  total flux cleaned = -0.00207154 Jy
! Component: 150  -  total flux cleaned = -0.00230927 Jy
! Component: 200  -  total flux cleaned = -0.00242363 Jy
! Total flux subtracted in 200 components = -0.00242363 Jy
! Clean residual min=-0.005783 max=0.004416 Jy/beam
! Clean residual mean=-0.000011 rms=0.001170 Jy/beam
! Combined flux in latest and established models = 0.072597 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 17 components and 0.072597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.105127Jy  sigma=0.713685
! Fit after  self-cal, rms=0.105141Jy  sigma=0.713495
wmodel /scr/pima/gc030_uvs/J1813+3144_X_map.mod
! Writing 17 model components to file: /scr/pima/gc030_uvs/J1813+3144_X_map.mod
wobs /scr/pima/gc030_uvs/J1813+3144_X_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J1813+3144_X_uvs.fits
wwins /scr/pima/gc030_uvs/J1813+3144_X_map.win
! wwins: Wrote 1 windows to /scr/pima/gc030_uvs/J1813+3144_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00257698 Jy
! Component: 100  -  total flux cleaned = -0.00478006 Jy
! Component: 150  -  total flux cleaned = -0.0066402 Jy
! Component: 200  -  total flux cleaned = -0.00754867 Jy
! Component: 250  -  total flux cleaned = -0.00783499 Jy
! Component: 300  -  total flux cleaned = -0.00817277 Jy
! Component: 350  -  total flux cleaned = -0.00849323 Jy
! Component: 400  -  total flux cleaned = -0.00880047 Jy
! Component: 450  -  total flux cleaned = -0.00909337 Jy
! Component: 500  -  total flux cleaned = -0.00920365 Jy
! Component: 550  -  total flux cleaned = -0.00947185 Jy
! Component: 600  -  total flux cleaned = -0.00962695 Jy
! Component: 650  -  total flux cleaned = -0.00972769 Jy
! Component: 700  -  total flux cleaned = -0.00987255 Jy
! Component: 750  -  total flux cleaned = -0.00996441 Jy
! Component: 800  -  total flux cleaned = -0.0100087 Jy
! Component: 850  -  total flux cleaned = -0.0100518 Jy
! Component: 900  -  total flux cleaned = -0.0101365 Jy
! Component: 950  -  total flux cleaned = -0.0101776 Jy
! Component: 1000  -  total flux cleaned = -0.0102181 Jy
! Component: 1050  -  total flux cleaned = -0.0102958 Jy
! Component: 1100  -  total flux cleaned = -0.0103325 Jy
! Component: 1150  -  total flux cleaned = -0.0103317 Jy
! Component: 1200  -  total flux cleaned = -0.0103325 Jy
! Component: 1250  -  total flux cleaned = -0.0104691 Jy
! Component: 1300  -  total flux cleaned = -0.0104695 Jy
! Component: 1350  -  total flux cleaned = -0.0105993 Jy
! Component: 1400  -  total flux cleaned = -0.0106622 Jy
! Component: 1450  -  total flux cleaned = -0.010754 Jy
! Component: 1500  -  total flux cleaned = -0.010844 Jy
! Component: 1550  -  total flux cleaned = -0.0109606 Jy
! Component: 1600  -  total flux cleaned = -0.0111606 Jy
! Component: 1650  -  total flux cleaned = -0.0112442 Jy
! Component: 1700  -  total flux cleaned = -0.0113796 Jy
! Component: 1750  -  total flux cleaned = -0.0113529 Jy
! Component: 1800  -  total flux cleaned = -0.011458 Jy
! Component: 1850  -  total flux cleaned = -0.0115095 Jy
! Component: 1900  -  total flux cleaned = -0.0115601 Jy
! Component: 1950  -  total flux cleaned = -0.0116338 Jy
! Component: 2000  -  total flux cleaned = -0.0117779 Jy
! Component: 2050  -  total flux cleaned = -0.0119186 Jy
! Component: 2100  -  total flux cleaned = -0.0119187 Jy
! Component: 2150  -  total flux cleaned = -0.0119875 Jy
! Component: 2200  -  total flux cleaned = -0.0120545 Jy
! Component: 2250  -  total flux cleaned = -0.0121644 Jy
! Component: 2300  -  total flux cleaned = -0.0122505 Jy
! Component: 2350  -  total flux cleaned = -0.0122924 Jy
! Component: 2400  -  total flux cleaned = -0.0123963 Jy
! Component: 2450  -  total flux cleaned = -0.0124165 Jy
! Component: 2500  -  total flux cleaned = -0.0124364 Jy
! Component: 2550  -  total flux cleaned = -0.0124361 Jy
! Component: 2600  -  total flux cleaned = -0.0123972 Jy
! Component: 2650  -  total flux cleaned = -0.0123783 Jy
! Component: 2700  -  total flux cleaned = -0.0124164 Jy
! Component: 2750  -  total flux cleaned = -0.0124349 Jy
! Component: 2800  -  total flux cleaned = -0.012435 Jy
! Component: 2850  -  total flux cleaned = -0.0123988 Jy
! Component: 2900  -  total flux cleaned = -0.0123989 Jy
! Component: 2950  -  total flux cleaned = -0.0123638 Jy
! Component: 3000  -  total flux cleaned = -0.0123467 Jy
! Component: 3050  -  total flux cleaned = -0.0123982 Jy
! Component: 3100  -  total flux cleaned = -0.0123815 Jy
! Component: 3150  -  total flux cleaned = -0.0123816 Jy
! Component: 3200  -  total flux cleaned = -0.0123982 Jy
! Component: 3250  -  total flux cleaned = -0.0123984 Jy
! Component: 3300  -  total flux cleaned = -0.0123984 Jy
! Component: 3350  -  total flux cleaned = -0.0123986 Jy
! Component: 3400  -  total flux cleaned = -0.0124296 Jy
! Component: 3450  -  total flux cleaned = -0.0123526 Jy
! Component: 3500  -  total flux cleaned = -0.012307 Jy
! Component: 3550  -  total flux cleaned = -0.0123072 Jy
! Component: 3600  -  total flux cleaned = -0.0122776 Jy
! Component: 3650  -  total flux cleaned = -0.0122924 Jy
! Component: 3700  -  total flux cleaned = -0.0122779 Jy
! Component: 3750  -  total flux cleaned = -0.0122637 Jy
! Component: 3800  -  total flux cleaned = -0.0122777 Jy
! Component: 3850  -  total flux cleaned = -0.0122916 Jy
! Component: 3900  -  total flux cleaned = -0.0122778 Jy
! Component: 3950  -  total flux cleaned = -0.0122914 Jy
! Component: 4000  -  total flux cleaned = -0.012278 Jy
! Component: 4050  -  total flux cleaned = -0.0123316 Jy
! Total flux subtracted in 4096 components = -0.0123315 Jy
! Clean residual min=-0.000690 max=0.000685 Jy/beam
! Clean residual mean=-0.000010 rms=0.000229 Jy/beam
! Combined flux in latest and established models = 0.0602655 Jy
keep
! Adding 321 model components to the UV plane model.
! The established model now contains 338 components and 0.0602655 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J1813+3144_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.6395 x 1.459 at 0.3362 degrees (North through East)
! Clean map  min=-0.0027834  max=0.064371 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J1813+3144_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0643712 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226456 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.05539 1.05539 2.11078 4.22157 8.44314 16.8863 33.7725 67.5451
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.064 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  284.254 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J1813+3144_X_uvs.log closed on Fri Apr 22 08:52:58 2016