! Started logfile: /scr/pima/gc030_uvs/J1608+6018_S_uvs.log on Fri Apr 22 07:54:04 2016
obs /scr/pima/gc030_uvs/J1608+6018_S_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J1608+6018_S_uva.fits
! AN table 1: 419 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.631185 visibilities/baseline/integration-bin.
! Found source: J1608+6018
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22724e+09        8e+06          1        8e+06
!  02        2  2.23499e+09        8e+06          1        8e+06
!  03        3  2.24324e+09        8e+06          1        8e+06
!  04        4  2.25099e+09        8e+06          1        8e+06
!  05        5  2.25924e+09        8e+06          1        8e+06
!  06        6  2.26699e+09        8e+06          1        8e+06
!  07        7  2.27524e+09        8e+06          1        8e+06
!  08        8  2.28299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 95208 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J1608+6018_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 807 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006799Jy  sigma=8.888070
! Fit after  self-cal, rms=0.942510Jy  sigma=8.292782
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.139 mas, bmaj=2.294 mas, bpa=-27.46 degrees
! Estimated noise=0.729044 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0490089 Jy
! Component: 100  -  total flux cleaned = 0.0602812 Jy
! Total flux subtracted in 100 components = 0.0602812 Jy
! Clean residual min=-0.004298 max=0.004336 Jy/beam
! Clean residual mean=-0.000011 rms=0.000931 Jy/beam
! Combined flux in latest and established models = 0.0602812 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0602812 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.101543Jy  sigma=0.793742
! Fit after  self-cal, rms=0.099864Jy  sigma=0.780400
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0063058 Jy
! Component: 100  -  total flux cleaned = 0.00955441 Jy
! Total flux subtracted in 100 components = 0.00955441 Jy
! Clean residual min=-0.004467 max=0.003834 Jy/beam
! Clean residual mean=-0.000008 rms=0.000874 Jy/beam
! Combined flux in latest and established models = 0.0698356 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.0698356 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099543Jy  sigma=0.776163
! Fit after  self-cal, rms=0.099394Jy  sigma=0.775874
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=2.974 mas, bpa=-20.83 degrees
! Estimated noise=0.293478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209533 Jy
! Component: 100  -  total flux cleaned = 0.0028799 Jy
! Component: 150  -  total flux cleaned = 0.00301206 Jy
! Component: 200  -  total flux cleaned = 0.00305572 Jy
! Total flux subtracted in 200 components = 0.00305572 Jy
! Clean residual min=-0.002508 max=0.002176 Jy/beam
! Clean residual mean=-0.000013 rms=0.000498 Jy/beam
! Combined flux in latest and established models = 0.0728913 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 17 components and 0.0728913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099375Jy  sigma=0.775309
! Fit after  self-cal, rms=0.099273Jy  sigma=0.775139
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.778 x 2.974 at -20.83 degrees (North through East)
! Clean map  min=-0.0023152  max=0.06539 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     EB        1.09     HN        0.98     KP        1.04     
!   LA        0.84     MK        0.96     NL        1.03     OV        1.00     
!   PT        1.04     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    MK        1.00*    NL        1.00*    OV        1.00*    
!   PT        1.00*    SC        1.00*    
! 
! 
! Correcting IF 3.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     EB        1.05     HN        0.89     KP        1.02     
!   LA        0.88     MK        0.91     NL        0.99     OV        1.05     
!   PT        1.06     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     EB        0.99     HN        0.98     KP        0.99     
!   LA        0.85     MK        0.96     NL        0.99     OV        0.95     
!   PT        1.08     SC        0.99     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     EB        0.99     HN        0.98     KP        1.01     
!   LA        0.87     MK        0.97     NL        1.04     OV        0.97     
!   PT        1.06     SC        1.01     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     EB        1.07     HN        0.84     KP        0.91     
!   LA        0.85     MK        0.92     NL        1.06     OV        0.98     
!   PT        1.07     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     EB        1.02     HN        0.94     KP        1.05     
!   LA        0.91     MK        0.94     NL        1.01     OV        0.97     
!   PT        1.06     SC        1.01     
! 
! 
! Fit before self-cal, rms=0.099273Jy  sigma=0.775139
! Fit after  self-cal, rms=0.095927Jy  sigma=0.773286
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=2.996 mas, bpa=-20.76 degrees
! Estimated noise=0.290024 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00076912 Jy
! Component: 100  -  total flux cleaned = -0.000769878 Jy
! Component: 150  -  total flux cleaned = -0.000738508 Jy
! Component: 200  -  total flux cleaned = -0.000698626 Jy
! Total flux subtracted in 200 components = -0.000698626 Jy
! Clean residual min=-0.001692 max=0.001609 Jy/beam
! Clean residual mean=-0.000009 rms=0.000406 Jy/beam
! Combined flux in latest and established models = 0.0721927 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 19 components and 0.0721927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095906Jy  sigma=0.773276
! Fit after  self-cal, rms=0.095877Jy  sigma=0.772735
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095877Jy  sigma=0.772735
! Fit after  self-cal, rms=0.095378Jy  sigma=0.771100
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.777 mas, bmaj=3.005 mas, bpa=-17.23 degrees
! Estimated noise=0.288284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000187304 Jy
! Component: 100  -  total flux cleaned = -0.00016108 Jy
! Component: 150  -  total flux cleaned = -0.000117706 Jy
! Component: 200  -  total flux cleaned = -9.10566e-05 Jy
! Total flux subtracted in 200 components = -9.10566e-05 Jy
! Clean residual min=-0.001738 max=0.001468 Jy/beam
! Clean residual mean=-0.000009 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0721017 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 24 components and 0.0721017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095369Jy  sigma=0.771113
! Fit after  self-cal, rms=0.095533Jy  sigma=0.770687
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.65138e-05 Jy
! Component: 100  -  total flux cleaned = -3.65275e-05 Jy
! Component: 150  -  total flux cleaned = -3.64917e-05 Jy
! Component: 200  -  total flux cleaned = -3.00661e-05 Jy
! Total flux subtracted in 200 components = -3.00661e-05 Jy
! Clean residual min=-0.001674 max=0.001502 Jy/beam
! Clean residual mean=-0.000009 rms=0.000358 Jy/beam
! Combined flux in latest and established models = 0.0720716 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 26 components and 0.0720716 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095531Jy  sigma=0.770696
! Fit after  self-cal, rms=0.095529Jy  sigma=0.770678
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095529Jy  sigma=0.770678
! Fit after  self-cal, rms=0.096040Jy  sigma=0.770697
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.78 mas, bmaj=3 mas, bpa=-17.95 degrees
! Estimated noise=0.287866 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.82827e-06 Jy
! Component: 100  -  total flux cleaned = 7.7107e-06 Jy
! Component: 150  -  total flux cleaned = 1.89173e-05 Jy
! Component: 200  -  total flux cleaned = 2.38587e-05 Jy
! Total flux subtracted in 200 components = 2.38587e-05 Jy
! Clean residual min=-0.001692 max=0.001526 Jy/beam
! Clean residual mean=-0.000008 rms=0.000351 Jy/beam
! Combined flux in latest and established models = 0.0720954 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 29 components and 0.0720955 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096039Jy  sigma=0.770700
! Fit after  self-cal, rms=0.096125Jy  sigma=0.770635
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.91824e-05 Jy
! Component: 100  -  total flux cleaned = -5.94818e-05 Jy
! Component: 150  -  total flux cleaned = -6.41491e-05 Jy
! Component: 200  -  total flux cleaned = -6.83184e-05 Jy
! Total flux subtracted in 200 components = -6.83184e-05 Jy
! Clean residual min=-0.001681 max=0.001513 Jy/beam
! Clean residual mean=-0.000008 rms=0.000354 Jy/beam
! Combined flux in latest and established models = 0.0720271 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 31 components and 0.0720271 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096124Jy  sigma=0.770633
! Fit after  self-cal, rms=0.096122Jy  sigma=0.770613
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096122Jy  sigma=0.770613
! Fit after  self-cal, rms=0.096502Jy  sigma=0.770630
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.59 mas, bmaj=8.564 mas, bpa=28.09 degrees
! Estimated noise=0.444479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000478729 Jy
! Component: 100  -  total flux cleaned = -0.000479055 Jy
! Component: 150  -  total flux cleaned = -0.000478821 Jy
! Component: 200  -  total flux cleaned = -0.000478506 Jy
! Total flux subtracted in 200 components = -0.000478506 Jy
! Clean residual min=-0.002157 max=0.002095 Jy/beam
! Clean residual mean=-0.000030 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.0715486 Jy
selfcal
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 33 components and 0.0715486 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096503Jy  sigma=0.770671
! Fit after  self-cal, rms=0.096561Jy  sigma=0.770631
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000115572 Jy
! Component: 100  -  total flux cleaned = -0.000116814 Jy
! Component: 150  -  total flux cleaned = -0.000117479 Jy
! Component: 200  -  total flux cleaned = -0.000117894 Jy
! Total flux subtracted in 200 components = -0.000117894 Jy
! Clean residual min=-0.002179 max=0.002073 Jy/beam
! Clean residual mean=-0.000031 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0714308 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 33 components and 0.0714307 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096565Jy  sigma=0.770666
! Fit after  self-cal, rms=0.096560Jy  sigma=0.770658
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=2.993 mas, bpa=-18.82 degrees
! Estimated noise=0.287074 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.778 x 2.993 at -18.82 degrees (North through East)
! Clean map  min=-0.0014591  max=0.063796 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.136 mas, bmaj=2.304 mas, bpa=-25.7 degrees
! Estimated noise=0.717319 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0489648 Jy
! Component: 100  -  total flux cleaned = 0.0610252 Jy
! Component: 150  -  total flux cleaned = 0.0662857 Jy
! Component: 200  -  total flux cleaned = 0.069 Jy
! Total flux subtracted in 200 components = 0.069 Jy
! Clean residual min=-0.003611 max=0.003685 Jy/beam
! Clean residual mean=-0.000007 rms=0.000796 Jy/beam
! Combined flux in latest and established models = 0.069 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.069 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=2.993 mas, bpa=-18.82 degrees
! Estimated noise=0.287074 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00190418 Jy
! Component: 100  -  total flux cleaned = 0.00265799 Jy
! Component: 150  -  total flux cleaned = 0.0027347 Jy
! Component: 200  -  total flux cleaned = 0.00276551 Jy
! Total flux subtracted in 200 components = 0.00276551 Jy
! Clean residual min=-0.001595 max=0.001599 Jy/beam
! Clean residual mean=-0.000009 rms=0.000353 Jy/beam
! Combined flux in latest and established models = 0.0717655 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 19 components and 0.0717655 Jy
! Inverting map 
! Added new window around map position (-5.5, 29.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00095669 Jy
! Component: 100  -  total flux cleaned = 0.000958021 Jy
! Component: 150  -  total flux cleaned = 0.000904738 Jy
! Component: 200  -  total flux cleaned = 0.000880656 Jy
! Total flux subtracted in 200 components = 0.000880656 Jy
! Clean residual min=-0.001585 max=0.001501 Jy/beam
! Clean residual mean=-0.000007 rms=0.000346 Jy/beam
! Combined flux in latest and established models = 0.0726461 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 32 components and 0.0726462 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.59 mas, bmaj=8.564 mas, bpa=28.09 degrees
! Estimated noise=0.444479 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000629997 Jy
! Component: 100  -  total flux cleaned = -0.000847077 Jy
! Component: 150  -  total flux cleaned = -0.000885969 Jy
! Component: 200  -  total flux cleaned = -0.000911638 Jy
! Total flux subtracted in 200 components = -0.000911638 Jy
! Clean residual min=-0.002183 max=0.002049 Jy/beam
! Clean residual mean=-0.000029 rms=0.000595 Jy/beam
! Combined flux in latest and established models = 0.0717345 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.60545e-05 Jy
! Component: 100  -  total flux cleaned = -2.3595e-05 Jy
! Component: 150  -  total flux cleaned = -3.0549e-05 Jy
! Component: 200  -  total flux cleaned = -3.08379e-05 Jy
! Total flux subtracted in 200 components = -3.08379e-05 Jy
! Clean residual min=-0.002184 max=0.002047 Jy/beam
! Clean residual mean=-0.000029 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.0717037 Jy
! Adding 13 model components to the UV plane model.
! The established model now contains 44 components and 0.0717037 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.778 mas, bmaj=2.993 mas, bpa=-18.82 degrees
! Estimated noise=0.287074 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000627513 Jy
! Component: 100  -  total flux cleaned = 0.000647527 Jy
! Component: 150  -  total flux cleaned = 0.000648059 Jy
! Component: 200  -  total flux cleaned = 0.000648451 Jy
! Total flux subtracted in 200 components = 0.000648451 Jy
! Clean residual min=-0.001577 max=0.001448 Jy/beam
! Clean residual mean=-0.000008 rms=0.000344 Jy/beam
! Combined flux in latest and established models = 0.0723521 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 54 components and 0.0723521 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.096528Jy  sigma=0.770400
! Fit after  self-cal, rms=0.096547Jy  sigma=0.770310
wmodel /scr/pima/gc030_uvs/J1608+6018_S_map.mod
! Writing 54 model components to file: /scr/pima/gc030_uvs/J1608+6018_S_map.mod
wobs /scr/pima/gc030_uvs/J1608+6018_S_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J1608+6018_S_uvs.fits
wwins /scr/pima/gc030_uvs/J1608+6018_S_map.win
! wwins: Wrote 2 windows to /scr/pima/gc030_uvs/J1608+6018_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000524331 Jy
! Component: 100  -  total flux cleaned = -0.000943832 Jy
! Component: 150  -  total flux cleaned = -0.00121828 Jy
! Component: 200  -  total flux cleaned = -0.00148255 Jy
! Component: 250  -  total flux cleaned = -0.00173742 Jy
! Component: 300  -  total flux cleaned = -0.00189559 Jy
! Component: 350  -  total flux cleaned = -0.00204984 Jy
! Component: 400  -  total flux cleaned = -0.00220024 Jy
! Component: 450  -  total flux cleaned = -0.00226283 Jy
! Component: 500  -  total flux cleaned = -0.00228359 Jy
! Component: 550  -  total flux cleaned = -0.002385 Jy
! Component: 600  -  total flux cleaned = -0.00246437 Jy
! Component: 650  -  total flux cleaned = -0.00248397 Jy
! Component: 700  -  total flux cleaned = -0.00254158 Jy
! Component: 750  -  total flux cleaned = -0.00261766 Jy
! Component: 800  -  total flux cleaned = -0.00263652 Jy
! Component: 850  -  total flux cleaned = -0.0027105 Jy
! Component: 900  -  total flux cleaned = -0.00274685 Jy
! Component: 950  -  total flux cleaned = -0.00283675 Jy
! Component: 1000  -  total flux cleaned = -0.00276613 Jy
! Component: 1050  -  total flux cleaned = -0.00287166 Jy
! Component: 1100  -  total flux cleaned = -0.0029411 Jy
! Component: 1150  -  total flux cleaned = -0.00300939 Jy
! Component: 1200  -  total flux cleaned = -0.00299247 Jy
! Component: 1250  -  total flux cleaned = -0.00307669 Jy
! Component: 1300  -  total flux cleaned = -0.00312626 Jy
! Component: 1350  -  total flux cleaned = -0.00320848 Jy
! Component: 1400  -  total flux cleaned = -0.00330573 Jy
! Component: 1450  -  total flux cleaned = -0.00333791 Jy
! Component: 1500  -  total flux cleaned = -0.00336994 Jy
! Component: 1550  -  total flux cleaned = -0.00344868 Jy
! Component: 1600  -  total flux cleaned = -0.00351087 Jy
! Component: 1650  -  total flux cleaned = -0.0036189 Jy
! Component: 1700  -  total flux cleaned = -0.0035729 Jy
! Component: 1750  -  total flux cleaned = -0.0036336 Jy
! Component: 1800  -  total flux cleaned = -0.00369375 Jy
! Component: 1850  -  total flux cleaned = -0.0037385 Jy
! Component: 1900  -  total flux cleaned = -0.0037238 Jy
! Component: 1950  -  total flux cleaned = -0.0037386 Jy
! Component: 2000  -  total flux cleaned = -0.0038255 Jy
! Component: 2050  -  total flux cleaned = -0.0038398 Jy
! Component: 2100  -  total flux cleaned = -0.00388246 Jy
! Component: 2150  -  total flux cleaned = -0.00386858 Jy
! Component: 2200  -  total flux cleaned = -0.00391061 Jy
! Component: 2250  -  total flux cleaned = -0.00399426 Jy
! Component: 2300  -  total flux cleaned = -0.00403575 Jy
! Component: 2350  -  total flux cleaned = -0.00407673 Jy
! Component: 2400  -  total flux cleaned = -0.00404952 Jy
! Component: 2450  -  total flux cleaned = -0.0040765 Jy
! Component: 2500  -  total flux cleaned = -0.00408985 Jy
! Component: 2550  -  total flux cleaned = -0.00408977 Jy
! Component: 2600  -  total flux cleaned = -0.00406341 Jy
! Component: 2650  -  total flux cleaned = -0.0041291 Jy
! Component: 2700  -  total flux cleaned = -0.00414218 Jy
! Component: 2750  -  total flux cleaned = -0.00419416 Jy
! Component: 2800  -  total flux cleaned = -0.00421997 Jy
! Component: 2850  -  total flux cleaned = -0.00420726 Jy
! Component: 2900  -  total flux cleaned = -0.00424535 Jy
! Component: 2950  -  total flux cleaned = -0.0042708 Jy
! Component: 3000  -  total flux cleaned = -0.00427087 Jy
! Component: 3050  -  total flux cleaned = -0.00435815 Jy
! Component: 3100  -  total flux cleaned = -0.00440756 Jy
! Component: 3150  -  total flux cleaned = -0.0043953 Jy
! Component: 3200  -  total flux cleaned = -0.00441985 Jy
! Component: 3250  -  total flux cleaned = -0.00450488 Jy
! Component: 3300  -  total flux cleaned = -0.00450488 Jy
! Component: 3350  -  total flux cleaned = -0.00451685 Jy
! Component: 3400  -  total flux cleaned = -0.00450493 Jy
! Component: 3450  -  total flux cleaned = -0.00455241 Jy
! Component: 3500  -  total flux cleaned = -0.00454064 Jy
! Component: 3550  -  total flux cleaned = -0.00449373 Jy
! Component: 3600  -  total flux cleaned = -0.0045521 Jy
! Component: 3650  -  total flux cleaned = -0.00451722 Jy
! Component: 3700  -  total flux cleaned = -0.00457492 Jy
! Component: 3750  -  total flux cleaned = -0.00459806 Jy
! Component: 3800  -  total flux cleaned = -0.00462092 Jy
! Component: 3850  -  total flux cleaned = -0.00465492 Jy
! Component: 3900  -  total flux cleaned = -0.00468882 Jy
! Component: 3950  -  total flux cleaned = -0.00471122 Jy
! Component: 4000  -  total flux cleaned = -0.00470015 Jy
! Component: 4050  -  total flux cleaned = -0.00472233 Jy
! Total flux subtracted in 4096 components = -0.00474439 Jy
! Clean residual min=-0.000574 max=0.000684 Jy/beam
! Clean residual mean=-0.000004 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0676077 Jy
keep
! Adding 355 model components to the UV plane model.
! The established model now contains 409 components and 0.0676078 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J1608+6018_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.778 x 2.993 at -18.82 degrees (North through East)
! Clean map  min=-0.0013489  max=0.063627 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J1608+6018_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0636269 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000193838 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.913944 0.913944 1.82789 3.65578 7.31155 14.6231 29.2462 58.4924
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.063 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  328.247 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J1608+6018_S_uvs.log closed on Fri Apr 22 07:54:14 2016