! Started logfile: /scr/pima/gc030_uvs/J1231+0725_X_uvs.log on Fri Apr 22 08:48:14 2016
obs /scr/pima/gc030_uvs/J1231+0725_X_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J1231+0725_X_uva.fits
! AN table 1: 70 integrations on 15 of 15 possible baselines.
! AN table 2: 274 integrations on 28 of 28 possible baselines.
! AN table 3: 70 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.63774 visibilities/baseline/integration-bin.
! Found source: J1231+0725
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.37724e+09        8e+06          1        8e+06
!  02        2  8.38499e+09        8e+06          1        8e+06
!  03        3  8.39324e+09        8e+06          1        8e+06
!  04        4  8.40099e+09        8e+06          1        8e+06
!  05        5  8.40924e+09        8e+06          1        8e+06
!  06        6  8.41699e+09        8e+06          1        8e+06
!  07        7  8.42524e+09        8e+06          1        8e+06
!  08        8  8.43299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 49856 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J1231+0725_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 1027 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 631 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.007800Jy  sigma=13.577846
! Fit after  self-cal, rms=0.931575Jy  sigma=12.553333
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5005 mas, bmaj=1.86 mas, bpa=-11.4 degrees
! Estimated noise=0.717481 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0593597 Jy
! Component: 100  -  total flux cleaned = 0.0724095 Jy
! Total flux subtracted in 100 components = 0.0724095 Jy
! Clean residual min=-0.004750 max=0.004831 Jy/beam
! Clean residual mean=0.000004 rms=0.001070 Jy/beam
! Combined flux in latest and established models = 0.0724095 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.0724095 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107419Jy  sigma=0.748995
! Fit after  self-cal, rms=0.106895Jy  sigma=0.743813
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5466 mas, bmaj=1.975 mas, bpa=-10.89 degrees
! Estimated noise=0.311661 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00307651 Jy
! Component: 100  -  total flux cleaned = 0.00349762 Jy
! Component: 150  -  total flux cleaned = 0.00349969 Jy
! Component: 200  -  total flux cleaned = 0.00355893 Jy
! Total flux subtracted in 200 components = 0.00355893 Jy
! Clean residual min=-0.003299 max=0.003015 Jy/beam
! Clean residual mean=0.000002 rms=0.000698 Jy/beam
! Combined flux in latest and established models = 0.0759685 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 14 components and 0.0759685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.106712Jy  sigma=0.742453
! Fit after  self-cal, rms=0.106722Jy  sigma=0.742396
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5466 x 1.975 at -10.89 degrees (North through East)
! Clean map  min=-0.0029235  max=0.074487 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     KP        0.99     LA        0.94     MK        0.84     
!   OV        1.00     PT        1.19     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     EB        1.01     HN        0.84     KP        0.96     
!   LA        0.94     NL        1.09     PT        1.11     SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.96     KP        0.97     LA        0.91     MK        0.87     
!   NL        1.16     PT        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     KP        1.00     LA        0.91     MK        1.02     
!   OV        1.01     PT        1.03     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.97     KP        1.01     LA        0.88     MK        0.88     
!   NL        1.05     PT        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     KP        0.95     LA        0.88     MK        0.88     
!   OV        1.08     PT        1.07     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     EB        1.02     HN        0.88     KP        0.98     
!   LA        0.87     NL        1.06     PT        1.08     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     KP        0.97     LA        0.85     MK        0.89     
!   NL        1.11     PT        1.05     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     KP        0.96     LA        0.92     MK        0.98     
!   OV        1.03     PT        1.08     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     KP        0.92     LA        0.99     MK        0.87     
!   NL        1.08     PT        1.05     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   OV        1.00*    PT        1.00*    
! 
!  A total of 210 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     EB        1.07     HN        1.00*    KP        0.95     
!   LA        0.92     NL        1.08     PT        1.04     SC        1.08     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00*    KP        1.00*    LA        1.00*    MK        1.00*    
!   NL        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     KP        0.92     LA        1.05     MK        0.87     
!   OV        1.06     PT        1.12     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.03     KP        0.96     LA        0.97     MK        0.94     
!   NL        1.06     PT        1.03     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     KP        0.96     LA        0.92     MK        0.85     
!   OV        1.02     PT        1.05     
! 
!  A total of 189 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.93     KP        1.00     LA        0.96     MK        0.99     
!   NL        1.08     PT        1.05     
! 
! 
! Fit before self-cal, rms=0.106722Jy  sigma=0.742396
! Fit after  self-cal, rms=0.102538Jy  sigma=0.737254
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5527 mas, bmaj=1.989 mas, bpa=-10.56 degrees
! Estimated noise=0.322808 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000376502 Jy
! Component: 100  -  total flux cleaned = 0.000441105 Jy
! Component: 150  -  total flux cleaned = 0.000424711 Jy
! Component: 200  -  total flux cleaned = 0.000409331 Jy
! Total flux subtracted in 200 components = 0.000409331 Jy
! Clean residual min=-0.002471 max=0.002489 Jy/beam
! Clean residual mean=0.000003 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0763778 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 18 components and 0.0763778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102528Jy  sigma=0.737183
! Fit after  self-cal, rms=0.102504Jy  sigma=0.736998
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102504Jy  sigma=0.736998
! Fit after  self-cal, rms=0.102527Jy  sigma=0.735479
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5537 mas, bmaj=1.988 mas, bpa=-10.58 degrees
! Estimated noise=0.325145 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.81336e-05 Jy
! Component: 100  -  total flux cleaned = 7.69261e-06 Jy
! Component: 150  -  total flux cleaned = 5.2363e-05 Jy
! Component: 200  -  total flux cleaned = 7.77392e-05 Jy
! Total flux subtracted in 200 components = 7.77392e-05 Jy
! Clean residual min=-0.002014 max=0.002142 Jy/beam
! Clean residual mean=0.000003 rms=0.000474 Jy/beam
! Combined flux in latest and established models = 0.0764555 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.0764555 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102521Jy  sigma=0.735442
! Fit after  self-cal, rms=0.102539Jy  sigma=0.735392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (15.4, 42.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00186188 Jy
! Component: 100  -  total flux cleaned = 0.00253903 Jy
! Component: 150  -  total flux cleaned = 0.00272148 Jy
! Component: 200  -  total flux cleaned = 0.00285335 Jy
! Total flux subtracted in 200 components = 0.00285335 Jy
! Clean residual min=-0.001990 max=0.001908 Jy/beam
! Clean residual mean=0.000001 rms=0.000441 Jy/beam
! Combined flux in latest and established models = 0.0793089 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 35 components and 0.0793089 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102486Jy  sigma=0.734868
! Fit after  self-cal, rms=0.102463Jy  sigma=0.734749
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102463Jy  sigma=0.734749
! Fit after  self-cal, rms=0.102718Jy  sigma=0.734662
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5539 mas, bmaj=1.982 mas, bpa=-10.57 degrees
! Estimated noise=0.326265 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000915846 Jy
! Component: 100  -  total flux cleaned = 0.00109146 Jy
! Component: 150  -  total flux cleaned = 0.00116976 Jy
! Component: 200  -  total flux cleaned = 0.00121689 Jy
! Total flux subtracted in 200 components = 0.00121689 Jy
! Clean residual min=-0.001964 max=0.001730 Jy/beam
! Clean residual mean=-0.000000 rms=0.000434 Jy/beam
! Combined flux in latest and established models = 0.0805258 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 42 components and 0.0805258 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102694Jy  sigma=0.734417
! Fit after  self-cal, rms=0.102688Jy  sigma=0.734373
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000365245 Jy
! Component: 100  -  total flux cleaned = 0.000410481 Jy
! Component: 150  -  total flux cleaned = 0.000450382 Jy
! Component: 200  -  total flux cleaned = 0.000505292 Jy
! Total flux subtracted in 200 components = 0.000505292 Jy
! Clean residual min=-0.001894 max=0.001675 Jy/beam
! Clean residual mean=-0.000001 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0810311 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 45 components and 0.0810311 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102677Jy  sigma=0.734244
! Fit after  self-cal, rms=0.102668Jy  sigma=0.734230
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102668Jy  sigma=0.734230
! Fit after  self-cal, rms=0.102220Jy  sigma=0.733860
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.469 mas, bmaj=2.83 mas, bpa=12.84 degrees
! Estimated noise=0.558458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000618426 Jy
! Component: 100  -  total flux cleaned = 0.000765351 Jy
! Component: 150  -  total flux cleaned = 0.000835889 Jy
! Component: 200  -  total flux cleaned = 0.000848727 Jy
! Total flux subtracted in 200 components = 0.000848727 Jy
! Clean residual min=-0.002634 max=0.002397 Jy/beam
! Clean residual mean=-0.000002 rms=0.000684 Jy/beam
! Combined flux in latest and established models = 0.0818798 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 53 components and 0.0818798 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102217Jy  sigma=0.733959
! Fit after  self-cal, rms=0.102230Jy  sigma=0.733937
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024366 Jy
! Component: 100  -  total flux cleaned = 0.000267317 Jy
! Component: 150  -  total flux cleaned = 0.000289954 Jy
! Component: 200  -  total flux cleaned = 0.000311673 Jy
! Total flux subtracted in 200 components = 0.000311673 Jy
! Clean residual min=-0.002619 max=0.002320 Jy/beam
! Clean residual mean=-0.000003 rms=0.000681 Jy/beam
! Combined flux in latest and established models = 0.0821915 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 54 components and 0.0821915 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102229Jy  sigma=0.734040
! Fit after  self-cal, rms=0.102236Jy  sigma=0.734032
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.5539 mas, bmaj=1.979 mas, bpa=-10.57 degrees
! Estimated noise=0.326277 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5539 x 1.979 at -10.57 degrees (North through East)
! Clean map  min=-0.0019269  max=0.07489 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5028 mas, bmaj=1.845 mas, bpa=-11.05 degrees
! Estimated noise=0.738952 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0598871 Jy
! Component: 100  -  total flux cleaned = 0.0732419 Jy
! Component: 150  -  total flux cleaned = 0.0775256 Jy
! Component: 200  -  total flux cleaned = 0.0784433 Jy
! Total flux subtracted in 200 components = 0.0784433 Jy
! Clean residual min=-0.003639 max=0.003704 Jy/beam
! Clean residual mean=0.000005 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.0784433 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0784433 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.5539 mas, bmaj=1.979 mas, bpa=-10.57 degrees
! Estimated noise=0.326277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00168887 Jy
! Component: 100  -  total flux cleaned = 0.00202546 Jy
! Component: 150  -  total flux cleaned = 0.00224462 Jy
! Component: 200  -  total flux cleaned = 0.00253925 Jy
! Total flux subtracted in 200 components = 0.00253925 Jy
! Clean residual min=-0.002044 max=0.002048 Jy/beam
! Clean residual mean=0.000001 rms=0.000468 Jy/beam
! Combined flux in latest and established models = 0.0809825 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 28 components and 0.0809825 Jy
! Inverting map 
! Added new window around map position (10.6, 49.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00117434 Jy
! Component: 100  -  total flux cleaned = 0.00112869 Jy
! Component: 150  -  total flux cleaned = 0.00112892 Jy
! Component: 200  -  total flux cleaned = 0.00113037 Jy
! Total flux subtracted in 200 components = 0.00113037 Jy
! Clean residual min=-0.002065 max=0.001784 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0821129 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 40 components and 0.0821129 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.469 mas, bmaj=2.83 mas, bpa=12.84 degrees
! Estimated noise=0.558458 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187193 Jy
! Component: 100  -  total flux cleaned = 0.000216266 Jy
! Component: 150  -  total flux cleaned = 0.000272081 Jy
! Component: 200  -  total flux cleaned = 0.000321675 Jy
! Total flux subtracted in 200 components = 0.000321675 Jy
! Clean residual min=-0.002751 max=0.002351 Jy/beam
! Clean residual mean=-0.000003 rms=0.000670 Jy/beam
! Combined flux in latest and established models = 0.0824346 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.35415e-05 Jy
! Component: 100  -  total flux cleaned = 4.37889e-05 Jy
! Component: 150  -  total flux cleaned = 4.30866e-05 Jy
! Component: 200  -  total flux cleaned = 4.33471e-05 Jy
! Total flux subtracted in 200 components = 4.33471e-05 Jy
! Clean residual min=-0.002689 max=0.002307 Jy/beam
! Clean residual mean=-0.000003 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0824779 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 54 components and 0.0824779 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.5539 mas, bmaj=1.979 mas, bpa=-10.57 degrees
! Estimated noise=0.326277 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.91425e-05 Jy
! Component: 100  -  total flux cleaned = 1.84943e-05 Jy
! Component: 150  -  total flux cleaned = 4.59049e-05 Jy
! Component: 200  -  total flux cleaned = 9.57589e-05 Jy
! Total flux subtracted in 200 components = 9.57589e-05 Jy
! Clean residual min=-0.001817 max=0.001800 Jy/beam
! Clean residual mean=-0.000001 rms=0.000408 Jy/beam
! Combined flux in latest and established models = 0.0825737 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 70 components and 0.0825737 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102192Jy  sigma=0.733768
! Fit after  self-cal, rms=0.102190Jy  sigma=0.733559
wmodel /scr/pima/gc030_uvs/J1231+0725_X_map.mod
! Writing 70 model components to file: /scr/pima/gc030_uvs/J1231+0725_X_map.mod
wobs /scr/pima/gc030_uvs/J1231+0725_X_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J1231+0725_X_uvs.fits
wwins /scr/pima/gc030_uvs/J1231+0725_X_map.win
! wwins: Wrote 3 windows to /scr/pima/gc030_uvs/J1231+0725_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000109876 Jy
! Component: 100  -  total flux cleaned = -0.000194539 Jy
! Component: 150  -  total flux cleaned = -0.000220589 Jy
! Component: 200  -  total flux cleaned = -0.000169064 Jy
! Component: 250  -  total flux cleaned = -0.000216356 Jy
! Component: 300  -  total flux cleaned = -0.000239186 Jy
! Component: 350  -  total flux cleaned = -0.000128815 Jy
! Component: 400  -  total flux cleaned = -0.000150529 Jy
! Component: 450  -  total flux cleaned = -0.000129439 Jy
! Component: 500  -  total flux cleaned = -4.8473e-05 Jy
! Component: 550  -  total flux cleaned = -8.79005e-05 Jy
! Component: 600  -  total flux cleaned = -6.82141e-05 Jy
! Component: 650  -  total flux cleaned = -6.79899e-05 Jy
! Component: 700  -  total flux cleaned = -8.63541e-05 Jy
! Component: 750  -  total flux cleaned = -0.000104205 Jy
! Component: 800  -  total flux cleaned = -0.000156421 Jy
! Component: 850  -  total flux cleaned = -0.000173367 Jy
! Component: 900  -  total flux cleaned = -0.00017334 Jy
! Component: 950  -  total flux cleaned = -0.000140872 Jy
! Component: 1000  -  total flux cleaned = -0.000205973 Jy
! Component: 1050  -  total flux cleaned = -0.000221868 Jy
! Component: 1100  -  total flux cleaned = -0.000221974 Jy
! Component: 1150  -  total flux cleaned = -0.000206794 Jy
! Component: 1200  -  total flux cleaned = -0.000206724 Jy
! Component: 1250  -  total flux cleaned = -0.000235865 Jy
! Component: 1300  -  total flux cleaned = -0.000163245 Jy
! Component: 1350  -  total flux cleaned = -0.000163276 Jy
! Component: 1400  -  total flux cleaned = -0.00013519 Jy
! Component: 1450  -  total flux cleaned = -9.38307e-05 Jy
! Component: 1500  -  total flux cleaned = -5.32342e-05 Jy
! Component: 1550  -  total flux cleaned = -3.98149e-05 Jy
! Component: 1600  -  total flux cleaned = -4.00008e-05 Jy
! Component: 1650  -  total flux cleaned = -2.66829e-05 Jy
! Component: 1700  -  total flux cleaned = -2.65189e-05 Jy
! Component: 1750  -  total flux cleaned = 2.37878e-05 Jy
! Component: 1800  -  total flux cleaned = 1.13207e-05 Jy
! Component: 1850  -  total flux cleaned = 3.55944e-05 Jy
! Component: 1900  -  total flux cleaned = -6.64818e-07 Jy
! Component: 1950  -  total flux cleaned = -3.57252e-07 Jy
! Component: 2000  -  total flux cleaned = -3.89977e-07 Jy
! Component: 2050  -  total flux cleaned = 2.25464e-05 Jy
! Component: 2100  -  total flux cleaned = -3.45017e-05 Jy
! Component: 2150  -  total flux cleaned = -1.18924e-05 Jy
! Component: 2200  -  total flux cleaned = -3.41783e-05 Jy
! Component: 2250  -  total flux cleaned = -5.62584e-05 Jy
! Component: 2300  -  total flux cleaned = -4.52662e-05 Jy
! Component: 2350  -  total flux cleaned = -3.47167e-05 Jy
! Component: 2400  -  total flux cleaned = -5.57337e-05 Jy
! Component: 2450  -  total flux cleaned = -3.47576e-05 Jy
! Component: 2500  -  total flux cleaned = -5.54766e-05 Jy
! Component: 2550  -  total flux cleaned = -4.52986e-05 Jy
! Component: 2600  -  total flux cleaned = -6.55254e-05 Jy
! Component: 2650  -  total flux cleaned = -7.5495e-05 Jy
! Component: 2700  -  total flux cleaned = -9.52202e-05 Jy
! Component: 2750  -  total flux cleaned = -0.000104961 Jy
! Component: 2800  -  total flux cleaned = -0.000104988 Jy
! Component: 2850  -  total flux cleaned = -0.000114486 Jy
! Component: 2900  -  total flux cleaned = -0.000171169 Jy
! Component: 2950  -  total flux cleaned = -0.000180411 Jy
! Component: 3000  -  total flux cleaned = -0.000198888 Jy
! Component: 3050  -  total flux cleaned = -0.00021721 Jy
! Component: 3100  -  total flux cleaned = -0.000244451 Jy
! Component: 3150  -  total flux cleaned = -0.000307388 Jy
! Component: 3200  -  total flux cleaned = -0.000325184 Jy
! Component: 3250  -  total flux cleaned = -0.000369135 Jy
! Component: 3300  -  total flux cleaned = -0.000360421 Jy
! Component: 3350  -  total flux cleaned = -0.000403673 Jy
! Component: 3400  -  total flux cleaned = -0.000437965 Jy
! Component: 3450  -  total flux cleaned = -0.000463387 Jy
! Component: 3500  -  total flux cleaned = -0.000488592 Jy
! Component: 3550  -  total flux cleaned = -0.000538544 Jy
! Component: 3600  -  total flux cleaned = -0.000554974 Jy
! Component: 3650  -  total flux cleaned = -0.000546724 Jy
! Component: 3700  -  total flux cleaned = -0.000595559 Jy
! Component: 3750  -  total flux cleaned = -0.000595574 Jy
! Component: 3800  -  total flux cleaned = -0.000651589 Jy
! Component: 3850  -  total flux cleaned = -0.000651558 Jy
! Component: 3900  -  total flux cleaned = -0.000675232 Jy
! Component: 3950  -  total flux cleaned = -0.000706511 Jy
! Component: 4000  -  total flux cleaned = -0.000760924 Jy
! Component: 4050  -  total flux cleaned = -0.000807188 Jy
! Total flux subtracted in 4096 components = -0.000807217 Jy
! Clean residual min=-0.000527 max=0.000404 Jy/beam
! Clean residual mean=-0.000000 rms=0.000127 Jy/beam
! Combined flux in latest and established models = 0.0817665 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 352 components and 0.0817665 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J1231+0725_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5539 x 1.979 at -10.57 degrees (North through East)
! Clean map  min=-0.0013137  max=0.075403 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J1231+0725_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0754029 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000125025 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.497429 0.497429 0.994858 1.98972 3.97943 7.95887 15.9177 31.8355 63.6709
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0003 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.075 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  603.101 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J1231+0725_X_uvs.log closed on Fri Apr 22 08:48:20 2016