! Started logfile: /scr/pima/gc030_uvs/J1204-0710_X_uvs.log on Fri Apr 22 08:47:56 2016 obs /scr/pima/gc030_uvs/J1204-0710_X_uva.fits ! Reading UV FITS file: /scr/pima/gc030_uvs/J1204-0710_X_uva.fits ! AN table 1: 140 integrations on 21 of 21 possible baselines. ! AN table 2: 140 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.794444 visibilities/baseline/integration-bin. ! Found source: J1204-0710 ! ! There are 8 IFs, and a total of 8 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.37724e+09 8e+06 1 8e+06 ! 02 2 8.38499e+09 8e+06 1 8e+06 ! 03 3 8.39324e+09 8e+06 1 8e+06 ! 04 4 8.40099e+09 8e+06 1 8e+06 ! 05 5 8.40924e+09 8e+06 1 8e+06 ! 06 6 8.41699e+09 8e+06 1 8e+06 ! 07 7 8.42524e+09 8e+06 1 8e+06 ! 08 8 8.43299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 139 lines of history. ! ! Reading 24024 visibilities. select rr, 1,2,3,4,6,7,8 ! Selecting polarization: RR, channels: 1..4 6..8 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 ! Reading IF 5 channels: (none) ! Reading IF 6 channels: 6..6 ! Reading IF 7 channels: 7..7 ! Reading IF 8 channels: 8..8 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J1204-0710_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 146 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 7. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 8. ! A total of 142 telescope corrections were flagged in sub-array 1. ! A total of 5 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.009647Jy sigma=11.627952 ! Fit after self-cal, rms=0.908485Jy sigma=10.467852 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6235 mas, bmaj=2.759 mas, bpa=-13.72 degrees ! Estimated noise=1.19571 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0762777 Jy ! Component: 100 - total flux cleaned = 0.0936426 Jy ! Total flux subtracted in 100 components = 0.0936426 Jy ! Clean residual min=-0.009621 max=0.008200 Jy/beam ! Clean residual mean=-0.000010 rms=0.002203 Jy/beam ! Combined flux in latest and established models = 0.0936426 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0936426 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104420Jy sigma=0.748956 ! Fit after self-cal, rms=0.103893Jy sigma=0.745884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.66 mas, bmaj=2.673 mas, bpa=-14.34 degrees ! Estimated noise=0.512243 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00746743 Jy ! Component: 100 - total flux cleaned = 0.0117617 Jy ! Component: 150 - total flux cleaned = 0.0138586 Jy ! Component: 200 - total flux cleaned = 0.0141013 Jy ! Total flux subtracted in 200 components = 0.0141013 Jy ! Clean residual min=-0.007055 max=0.006616 Jy/beam ! Clean residual mean=0.000019 rms=0.001835 Jy/beam ! Combined flux in latest and established models = 0.107744 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 27 components and 0.107744 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103412Jy sigma=0.737693 ! Fit after self-cal, rms=0.103313Jy sigma=0.737511 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.66 x 2.673 at -14.34 degrees (North through East) ! Clean map min=-0.0064969 max=0.098095 Jy/beam if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val ! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2. ! Selfcal phase corrections will not be limited. gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 KP 0.93 LA 0.87 MK 0.94 ! NL 1.10 OV 1.11 PT 1.01 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 0.97 HN 0.93 NL 1.15 SC 1.04 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 1.02 HN 0.92 NL 1.04 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 0.97 HN 0.98 NL 1.12 SC 1.04 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 KP 0.89 LA 0.84 MK 0.94 ! NL 1.14 OV 1.15 PT 1.02 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 1.00* HN 1.00* NL 1.00* SC 1.00* ! ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! A total of 414 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 0.00* HN 0.00* NL 0.00* SC 0.00* ! ! ! Correcting IF 7. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 KP 0.94 LA 0.86 MK 0.95 ! NL 1.11 OV 1.10 PT 0.99 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 1.00 HN 0.89 NL 1.05 SC 1.02 ! ! ! Correcting IF 8. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00* KP 1.00* LA 1.00* MK 1.00* ! NL 1.00* OV 1.00* PT 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! EB 0.98 HN 0.87 NL 1.15 SC 1.02 ! ! ! Fit before self-cal, rms=0.103313Jy sigma=0.737511 ! Fit after self-cal, rms=0.102282Jy sigma=0.733611 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6871 mas, bmaj=2.725 mas, bpa=-14.2 degrees ! Estimated noise=0.526095 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000271404 Jy ! Component: 100 - total flux cleaned = -0.000351695 Jy ! Component: 150 - total flux cleaned = -0.000352899 Jy ! Component: 200 - total flux cleaned = -0.000353786 Jy ! Total flux subtracted in 200 components = -0.000353786 Jy ! Clean residual min=-0.005051 max=0.005429 Jy/beam ! Clean residual mean=0.000038 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.10739 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 38 components and 0.10739 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.102260Jy sigma=0.733326 ! Fit after self-cal, rms=0.102361Jy sigma=0.733068 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.102361Jy sigma=0.733068 ! Fit after self-cal, rms=0.103163Jy sigma=0.727324 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6856 mas, bmaj=2.735 mas, bpa=-14.21 degrees ! Estimated noise=0.528275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00105304 Jy ! Component: 100 - total flux cleaned = 0.00142368 Jy ! Component: 150 - total flux cleaned = 0.0014241 Jy ! Component: 200 - total flux cleaned = 0.0014243 Jy ! Total flux subtracted in 200 components = 0.0014243 Jy ! Clean residual min=-0.003536 max=0.004083 Jy/beam ! Clean residual mean=0.000031 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.108814 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 48 components and 0.108814 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103155Jy sigma=0.727118 ! Fit after self-cal, rms=0.103201Jy sigma=0.726951 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.06271e-06 Jy ! Component: 100 - total flux cleaned = -2.48877e-05 Jy ! Component: 150 - total flux cleaned = -6.45914e-05 Jy ! Component: 200 - total flux cleaned = -7.66403e-05 Jy ! Total flux subtracted in 200 components = -7.66403e-05 Jy ! Clean residual min=-0.003578 max=0.004105 Jy/beam ! Clean residual mean=0.000032 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.108738 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.108738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103197Jy sigma=0.726902 ! Fit after self-cal, rms=0.103199Jy sigma=0.726896 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103199Jy sigma=0.726896 ! Fit after self-cal, rms=0.103825Jy sigma=0.726821 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6848 mas, bmaj=2.738 mas, bpa=-14.21 degrees ! Estimated noise=0.530486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000759726 Jy ! Component: 100 - total flux cleaned = 0.000920878 Jy ! Component: 150 - total flux cleaned = 0.000920454 Jy ! Component: 200 - total flux cleaned = 0.000907347 Jy ! Total flux subtracted in 200 components = 0.000907347 Jy ! Clean residual min=-0.003505 max=0.004072 Jy/beam ! Clean residual mean=0.000032 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.109645 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 57 components and 0.109645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103821Jy sigma=0.726698 ! Fit after self-cal, rms=0.103837Jy sigma=0.726691 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.47525e-06 Jy ! Component: 100 - total flux cleaned = -9.45547e-06 Jy ! Component: 150 - total flux cleaned = -9.66281e-06 Jy ! Component: 200 - total flux cleaned = -2.08444e-05 Jy ! Total flux subtracted in 200 components = -2.08444e-05 Jy ! Clean residual min=-0.003503 max=0.004067 Jy/beam ! Clean residual mean=0.000032 rms=0.001093 Jy/beam ! Combined flux in latest and established models = 0.109624 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 64 components and 0.109624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103832Jy sigma=0.726663 ! Fit after self-cal, rms=0.103832Jy sigma=0.726659 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.103832Jy sigma=0.726659 ! Fit after self-cal, rms=0.104252Jy sigma=0.726627 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=3.276 mas, bpa=11 degrees ! Estimated noise=0.789537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000358048 Jy ! Component: 100 - total flux cleaned = 0.000303583 Jy ! Component: 150 - total flux cleaned = 0.000254228 Jy ! Component: 200 - total flux cleaned = 0.000209086 Jy ! Total flux subtracted in 200 components = 0.000209086 Jy ! Clean residual min=-0.005719 max=0.006151 Jy/beam ! Clean residual mean=0.000070 rms=0.001896 Jy/beam ! Combined flux in latest and established models = 0.109833 Jy selfcal ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 68 components and 0.109833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104249Jy sigma=0.726653 ! Fit after self-cal, rms=0.104227Jy sigma=0.726627 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.3516e-06 Jy ! Component: 100 - total flux cleaned = -5.98049e-05 Jy ! Component: 150 - total flux cleaned = -0.000149511 Jy ! Component: 200 - total flux cleaned = -0.000209863 Jy ! Total flux subtracted in 200 components = -0.000209863 Jy ! Clean residual min=-0.005689 max=0.006081 Jy/beam ! Clean residual mean=0.000069 rms=0.001884 Jy/beam ! Combined flux in latest and established models = 0.109623 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 68 components and 0.109623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104228Jy sigma=0.726705 ! Fit after self-cal, rms=0.104212Jy sigma=0.726683 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.6848 mas, bmaj=2.741 mas, bpa=-14.2 degrees ! Estimated noise=0.532147 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6848 x 2.741 at -14.2 degrees (North through East) ! Clean map min=-0.0035921 max=0.097962 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6221 mas, bmaj=2.792 mas, bpa=-13.7 degrees ! Estimated noise=1.20473 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0770502 Jy ! Component: 100 - total flux cleaned = 0.0946334 Jy ! Component: 150 - total flux cleaned = 0.10213 Jy ! Component: 200 - total flux cleaned = 0.106491 Jy ! Total flux subtracted in 200 components = 0.106491 Jy ! Clean residual min=-0.005365 max=0.005496 Jy/beam ! Clean residual mean=0.000030 rms=0.001368 Jy/beam ! Combined flux in latest and established models = 0.106491 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.106491 Jy ! Inverting map and beam ! Estimated beam: bmin=0.6848 mas, bmaj=2.741 mas, bpa=-14.2 degrees ! Estimated noise=0.532147 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00240541 Jy ! Component: 100 - total flux cleaned = 0.00327089 Jy ! Component: 150 - total flux cleaned = 0.00330982 Jy ! Component: 200 - total flux cleaned = 0.00331089 Jy ! Total flux subtracted in 200 components = 0.00331089 Jy ! Clean residual min=-0.003530 max=0.004278 Jy/beam ! Clean residual mean=0.000031 rms=0.001122 Jy/beam ! Combined flux in latest and established models = 0.109801 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 34 components and 0.109801 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.752 mas, bmaj=3.276 mas, bpa=11 degrees ! Estimated noise=0.789537 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000362201 Jy ! Component: 100 - total flux cleaned = 0.000277993 Jy ! Component: 150 - total flux cleaned = 0.000205287 Jy ! Component: 200 - total flux cleaned = 0.000143036 Jy ! Total flux subtracted in 200 components = 0.000143036 Jy ! Clean residual min=-0.005683 max=0.006206 Jy/beam ! Clean residual mean=0.000071 rms=0.001899 Jy/beam ! Combined flux in latest and established models = 0.109945 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -5.34166e-05 Jy ! Component: 100 - total flux cleaned = -0.000123719 Jy ! Component: 150 - total flux cleaned = -0.000165233 Jy ! Component: 200 - total flux cleaned = -0.000203306 Jy ! Total flux subtracted in 200 components = -0.000203306 Jy ! Clean residual min=-0.005655 max=0.006153 Jy/beam ! Clean residual mean=0.000070 rms=0.001886 Jy/beam ! Combined flux in latest and established models = 0.109741 Jy ! Adding 9 model components to the UV plane model. ! The established model now contains 41 components and 0.109741 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.6848 mas, bmaj=2.741 mas, bpa=-14.2 degrees ! Estimated noise=0.532147 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000325469 Jy ! Component: 100 - total flux cleaned = -0.000296661 Jy ! Component: 150 - total flux cleaned = -0.000323835 Jy ! Component: 200 - total flux cleaned = -0.000325002 Jy ! Total flux subtracted in 200 components = -0.000325002 Jy ! Clean residual min=-0.003652 max=0.004292 Jy/beam ! Clean residual mean=0.000030 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.109416 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 52 components and 0.109416 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Not correcting unselected IF 5. ! ! Correcting IF 6. ! ! Correcting IF 7. ! ! Correcting IF 8. ! ! Fit before self-cal, rms=0.104210Jy sigma=0.726666 ! Fit after self-cal, rms=0.104225Jy sigma=0.726654 wmodel /scr/pima/gc030_uvs/J1204-0710_X_map.mod ! Writing 52 model components to file: /scr/pima/gc030_uvs/J1204-0710_X_map.mod wobs /scr/pima/gc030_uvs/J1204-0710_X_uvs.fits ! Writing UV FITS file: /scr/pima/gc030_uvs/J1204-0710_X_uvs.fits wwins /scr/pima/gc030_uvs/J1204-0710_X_map.win ! wwins: Wrote 1 windows to /scr/pima/gc030_uvs/J1204-0710_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00187509 Jy ! Component: 100 - total flux cleaned = 0.00280784 Jy ! Component: 150 - total flux cleaned = 0.00310934 Jy ! Component: 200 - total flux cleaned = 0.00333559 Jy ! Component: 250 - total flux cleaned = 0.00370415 Jy ! Component: 300 - total flux cleaned = 0.00399981 Jy ! Component: 350 - total flux cleaned = 0.0043268 Jy ! Component: 400 - total flux cleaned = 0.00467991 Jy ! Component: 450 - total flux cleaned = 0.00492885 Jy ! Component: 500 - total flux cleaned = 0.0052448 Jy ! Component: 550 - total flux cleaned = 0.00550781 Jy ! Component: 600 - total flux cleaned = 0.00572135 Jy ! Component: 650 - total flux cleaned = 0.0059584 Jy ! Component: 700 - total flux cleaned = 0.00611863 Jy ! Component: 750 - total flux cleaned = 0.00630451 Jy ! Component: 800 - total flux cleaned = 0.00654122 Jy ! Component: 850 - total flux cleaned = 0.00679672 Jy ! Component: 900 - total flux cleaned = 0.00706786 Jy ! Component: 950 - total flux cleaned = 0.00735438 Jy ! Component: 1000 - total flux cleaned = 0.00768159 Jy ! Component: 1050 - total flux cleaned = 0.00802119 Jy ! Component: 1100 - total flux cleaned = 0.00832559 Jy ! Component: 1150 - total flux cleaned = 0.00857488 Jy ! Component: 1200 - total flux cleaned = 0.00888232 Jy ! Component: 1250 - total flux cleaned = 0.00915834 Jy ! Component: 1300 - total flux cleaned = 0.00940533 Jy ! Component: 1350 - total flux cleaned = 0.00966503 Jy ! Component: 1400 - total flux cleaned = 0.00991686 Jy ! Component: 1450 - total flux cleaned = 0.0101433 Jy ! Component: 1500 - total flux cleaned = 0.0103825 Jy ! Component: 1550 - total flux cleaned = 0.0106327 Jy ! Component: 1600 - total flux cleaned = 0.0108242 Jy ! Component: 1650 - total flux cleaned = 0.0109946 Jy ! Component: 1700 - total flux cleaned = 0.0111777 Jy ! Component: 1750 - total flux cleaned = 0.0112918 Jy ! Component: 1800 - total flux cleaned = 0.0114194 Jy ! Component: 1850 - total flux cleaned = 0.01156 Jy ! Component: 1900 - total flux cleaned = 0.0116826 Jy ! Component: 1950 - total flux cleaned = 0.011803 Jy ! Component: 2000 - total flux cleaned = 0.0118478 Jy ! Component: 2050 - total flux cleaned = 0.0118917 Jy ! Component: 2100 - total flux cleaned = 0.0119206 Jy ! Component: 2150 - total flux cleaned = 0.0119491 Jy ! Component: 2200 - total flux cleaned = 0.0119913 Jy ! Component: 2250 - total flux cleaned = 0.0120188 Jy ! Component: 2300 - total flux cleaned = 0.0119917 Jy ! Component: 2350 - total flux cleaned = 0.0120187 Jy ! Component: 2400 - total flux cleaned = 0.0120717 Jy ! Component: 2450 - total flux cleaned = 0.0121244 Jy ! Component: 2500 - total flux cleaned = 0.0121505 Jy ! Component: 2550 - total flux cleaned = 0.0121634 Jy ! Component: 2600 - total flux cleaned = 0.012202 Jy ! Component: 2650 - total flux cleaned = 0.0121764 Jy ! Component: 2700 - total flux cleaned = 0.0122017 Jy ! Component: 2750 - total flux cleaned = 0.0122143 Jy ! Component: 2800 - total flux cleaned = 0.0122393 Jy ! Component: 2850 - total flux cleaned = 0.0122143 Jy ! Component: 2900 - total flux cleaned = 0.0122018 Jy ! Component: 2950 - total flux cleaned = 0.0122018 Jy ! Component: 3000 - total flux cleaned = 0.0122018 Jy ! Component: 3050 - total flux cleaned = 0.0122141 Jy ! Component: 3100 - total flux cleaned = 0.012276 Jy ! Component: 3150 - total flux cleaned = 0.0122759 Jy ! Component: 3200 - total flux cleaned = 0.012313 Jy ! Component: 3250 - total flux cleaned = 0.0123749 Jy ! Component: 3300 - total flux cleaned = 0.012412 Jy ! Component: 3350 - total flux cleaned = 0.0124988 Jy ! Component: 3400 - total flux cleaned = 0.0125733 Jy ! Component: 3450 - total flux cleaned = 0.0126354 Jy ! Component: 3500 - total flux cleaned = 0.012735 Jy ! Component: 3550 - total flux cleaned = 0.0127973 Jy ! Component: 3600 - total flux cleaned = 0.0129097 Jy ! Component: 3650 - total flux cleaned = 0.0129724 Jy ! Component: 3700 - total flux cleaned = 0.0130477 Jy ! Component: 3750 - total flux cleaned = 0.0131485 Jy ! Component: 3800 - total flux cleaned = 0.0132496 Jy ! Component: 3850 - total flux cleaned = 0.0133766 Jy ! Component: 3900 - total flux cleaned = 0.0134658 Jy ! Component: 3950 - total flux cleaned = 0.0135682 Jy ! Component: 4000 - total flux cleaned = 0.0136453 Jy ! Component: 4050 - total flux cleaned = 0.0137485 Jy ! Total flux subtracted in 4096 components = 0.0138392 Jy ! Clean residual min=-0.000784 max=0.000745 Jy/beam ! Clean residual mean=0.000013 rms=0.000200 Jy/beam ! Combined flux in latest and established models = 0.123255 Jy keep ! Adding 255 model components to the UV plane model. ! The established model now contains 305 components and 0.123255 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/scr/pima/gc030_uvs/J1204-0710_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6848 x 2.741 at -14.2 degrees (North through East) ! Clean map min=-0.0022503 max=0.0975 Jy/beam ! Writing clean map to FITS file: /scr/pima/gc030_uvs/J1204-0710_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0975 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000214634 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.660412 0.660412 1.32082 2.64165 5.28329 10.5666 21.1332 42.2663 84.5327 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.097 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 454.262 quit ! Quitting program ! Log file /scr/pima/gc030_uvs/J1204-0710_X_uvs.log closed on Fri Apr 22 08:48:01 2016