! Started logfile: /scr/pima/gc030_uvs/J1043-0553_X_uvs.log on Fri Apr 22 08:46:44 2016
obs /scr/pima/gc030_uvs/J1043-0553_X_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J1043-0553_X_uva.fits
! AN table 1: 138 integrations on 6 of 6 possible baselines.
! AN table 2: 70 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.983639 visibilities/baseline/integration-bin.
! Found source: J1043-0553
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.37724e+09        8e+06          1        8e+06
!  02        2  8.38499e+09        8e+06          1        8e+06
!  03        3  8.39324e+09        8e+06          1        8e+06
!  04        4  8.40099e+09        8e+06          1        8e+06
!  05        5  8.40924e+09        8e+06          1        8e+06
!  06        6  8.41699e+09        8e+06          1        8e+06
!  07        7  8.42524e+09        8e+06          1        8e+06
!  08        8  8.43299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 12024 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J1043-0553_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 156 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 20 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.009855Jy  sigma=15.382241
! Fit after  self-cal, rms=0.897551Jy  sigma=13.794926
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5044 mas, bmaj=2.686 mas, bpa=-11.88 degrees
! Estimated noise=1.39952 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0766847 Jy
! Component: 100  -  total flux cleaned = 0.095675 Jy
! Total flux subtracted in 100 components = 0.095675 Jy
! Clean residual min=-0.008765 max=0.008838 Jy/beam
! Clean residual mean=-0.000022 rms=0.002852 Jy/beam
! Combined flux in latest and established models = 0.095675 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.095675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099063Jy  sigma=0.826087
! Fit after  self-cal, rms=0.099036Jy  sigma=0.824751
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5691 mas, bmaj=2.464 mas, bpa=-13.42 degrees
! Estimated noise=0.541508 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0052098 Jy
! Component: 100  -  total flux cleaned = 0.00773547 Jy
! Component: 150  -  total flux cleaned = 0.0108577 Jy
! Component: 200  -  total flux cleaned = 0.013006 Jy
! Total flux subtracted in 200 components = 0.013006 Jy
! Clean residual min=-0.002872 max=0.002892 Jy/beam
! Clean residual mean=-0.000015 rms=0.001023 Jy/beam
! Combined flux in latest and established models = 0.108681 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 67 components and 0.108681 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.095935Jy  sigma=0.783769
! Fit after  self-cal, rms=0.095552Jy  sigma=0.783177
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5691 x 2.464 at -13.42 degrees (North through East)
! Clean map  min=-0.0050269  max=0.097494 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   EB        0.99     HN        1.01     NL        0.99     SC        1.05     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     KP        0.99     LA        0.87     NL        1.02     
!   PT        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   EB        1.02     HN        0.91     NL        1.00     SC        0.98     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     KP        1.00     LA        0.86     NL        0.98     
!   PT        1.02     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   EB        1.01     HN        1.03     NL        1.02     SC        0.99     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     KP        0.96     LA        0.84     NL        1.09     
!   PT        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   EB        0.99     HN        0.97     NL        0.98     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     KP        1.01     LA        0.90     NL        1.05     
!   PT        0.97     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 396 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   EB        0.00*    HN        0.00*    NL        0.00*    SC        0.00*    
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.01     KP        0.95     LA        0.87     NL        1.05     
!   PT        0.90     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   EB        1.02     HN        0.96     NL        1.01     SC        1.00     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     KP        0.96     LA        0.84     NL        1.04     
!   PT        0.99     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   EB        1.08     HN        0.89     NL        0.94     SC        0.95     
! 
!  A total of 3 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     KP        0.96     LA        0.85     NL        1.03     
!   PT        0.99     
! 
! 
! Fit before self-cal, rms=0.095552Jy  sigma=0.783177
! Fit after  self-cal, rms=0.091311Jy  sigma=0.781470
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.5922 mas, bmaj=2.512 mas, bpa=-13.12 degrees
! Estimated noise=0.551341 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00274397 Jy
! Component: 100  -  total flux cleaned = 0.0039782 Jy
! Component: 150  -  total flux cleaned = 0.00398644 Jy
! Component: 200  -  total flux cleaned = 0.00381425 Jy
! Total flux subtracted in 200 components = 0.00381425 Jy
! Clean residual min=-0.000656 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.112495 Jy
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 119 components and 0.112495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091174Jy  sigma=0.780070
! Fit after  self-cal, rms=0.091000Jy  sigma=0.779743
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.091000Jy  sigma=0.779743
! Fit after  self-cal, rms=0.090879Jy  sigma=0.779055
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5932 mas, bmaj=2.509 mas, bpa=-13.14 degrees
! Estimated noise=0.549546 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000651318 Jy
! Component: 100  -  total flux cleaned = 0.000798067 Jy
! Component: 150  -  total flux cleaned = 0.000966466 Jy
! Component: 200  -  total flux cleaned = 0.00109591 Jy
! Total flux subtracted in 200 components = 0.00109591 Jy
! Clean residual min=-0.000345 max=0.000342 Jy/beam
! Clean residual mean=0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.113591 Jy
selfcal
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 170 components and 0.113591 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090856Jy  sigma=0.778801
! Fit after  self-cal, rms=0.090839Jy  sigma=0.778759
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.18614e-05 Jy
! Component: 100  -  total flux cleaned = 4.2525e-06 Jy
! Component: 150  -  total flux cleaned = -4.70789e-05 Jy
! Component: 200  -  total flux cleaned = -6.35193e-05 Jy
! Total flux subtracted in 200 components = -6.35193e-05 Jy
! Clean residual min=-0.000266 max=0.000267 Jy/beam
! Clean residual mean=-0.000000 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.113528 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 204 components and 0.113528 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090829Jy  sigma=0.778669
! Fit after  self-cal, rms=0.090828Jy  sigma=0.778663
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090828Jy  sigma=0.778663
! Fit after  self-cal, rms=0.090556Jy  sigma=0.779153
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5937 mas, bmaj=2.504 mas, bpa=-13.17 degrees
! Estimated noise=0.548344 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000110043 Jy
! Component: 100  -  total flux cleaned = 9.34131e-05 Jy
! Component: 150  -  total flux cleaned = 0.000153732 Jy
! Component: 200  -  total flux cleaned = 0.000252784 Jy
! Total flux subtracted in 200 components = 0.000252784 Jy
! Clean residual min=-0.000229 max=0.000230 Jy/beam
! Clean residual mean=0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.11378 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 243 components and 0.11378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090548Jy  sigma=0.779067
! Fit after  self-cal, rms=0.090543Jy  sigma=0.779047
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.89469e-05 Jy
! Component: 100  -  total flux cleaned = 5.02743e-05 Jy
! Component: 150  -  total flux cleaned = 2.53055e-05 Jy
! Component: 200  -  total flux cleaned = 3.69968e-05 Jy
! Total flux subtracted in 200 components = 3.69968e-05 Jy
! Clean residual min=-0.000195 max=0.000195 Jy/beam
! Clean residual mean=0.000000 rms=0.000063 Jy/beam
! Combined flux in latest and established models = 0.113817 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 267 components and 0.113817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090538Jy  sigma=0.778995
! Fit after  self-cal, rms=0.090544Jy  sigma=0.778992
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090544Jy  sigma=0.778992
! Fit after  self-cal, rms=0.090146Jy  sigma=0.778992
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.59 mas, bmaj=2.78 mas, bpa=2.448 degrees
! Estimated noise=0.92146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000330755 Jy
! Component: 100  -  total flux cleaned = -0.000381875 Jy
! Component: 150  -  total flux cleaned = -0.000430021 Jy
! Component: 200  -  total flux cleaned = -0.000507923 Jy
! Total flux subtracted in 200 components = -0.000507923 Jy
! Clean residual min=-0.000257 max=0.000257 Jy/beam
! Clean residual mean=-0.000000 rms=0.000086 Jy/beam
! Combined flux in latest and established models = 0.113309 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 300 components and 0.113309 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090141Jy  sigma=0.778943
! Fit after  self-cal, rms=0.090132Jy  sigma=0.778938
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.7921e-05 Jy
! Component: 100  -  total flux cleaned = 4.18283e-05 Jy
! Component: 150  -  total flux cleaned = 4.20392e-05 Jy
! Component: 200  -  total flux cleaned = 5.47329e-05 Jy
! Total flux subtracted in 200 components = 5.47329e-05 Jy
! Clean residual min=-0.000224 max=0.000224 Jy/beam
! Clean residual mean=-0.000000 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.113364 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 324 components and 0.113364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090129Jy  sigma=0.778921
! Fit after  self-cal, rms=0.090135Jy  sigma=0.778918
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=2.501 mas, bpa=-13.19 degrees
! Estimated noise=0.547464 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5939 x 2.501 at -13.19 degrees (North through East)
! Clean map  min=-0.0023658  max=0.094598 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.5111 mas, bmaj=2.681 mas, bpa=-11.91 degrees
! Estimated noise=1.36954 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0748511 Jy
! Component: 100  -  total flux cleaned = 0.093137 Jy
! Component: 150  -  total flux cleaned = 0.0998112 Jy
! Component: 200  -  total flux cleaned = 0.102287 Jy
! Total flux subtracted in 200 components = 0.102287 Jy
! Clean residual min=-0.003853 max=0.003852 Jy/beam
! Clean residual mean=-0.000009 rms=0.001314 Jy/beam
! Combined flux in latest and established models = 0.102287 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 33 model components to the UV plane model.
! The established model now contains 33 components and 0.102287 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=2.501 mas, bpa=-13.19 degrees
! Estimated noise=0.547464 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00121906 Jy
! Component: 100  -  total flux cleaned = 0.00192466 Jy
! Component: 150  -  total flux cleaned = 0.00303325 Jy
! Component: 200  -  total flux cleaned = 0.00407854 Jy
! Total flux subtracted in 200 components = 0.00407854 Jy
! Clean residual min=-0.001786 max=0.001777 Jy/beam
! Clean residual mean=-0.000005 rms=0.000562 Jy/beam
! Combined flux in latest and established models = 0.106365 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 83 components and 0.106366 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.59 mas, bmaj=2.78 mas, bpa=2.448 degrees
! Estimated noise=0.92146 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00195907 Jy
! Component: 100  -  total flux cleaned = 0.00331012 Jy
! Component: 150  -  total flux cleaned = 0.00305296 Jy
! Component: 200  -  total flux cleaned = 0.00270221 Jy
! Total flux subtracted in 200 components = 0.00270221 Jy
! Clean residual min=-0.000892 max=0.000889 Jy/beam
! Clean residual mean=-0.000004 rms=0.000350 Jy/beam
! Combined flux in latest and established models = 0.109068 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000309873 Jy
! Component: 100  -  total flux cleaned = -0.000309386 Jy
! Component: 150  -  total flux cleaned = -0.000166033 Jy
! Component: 200  -  total flux cleaned = -2.59278e-05 Jy
! Total flux subtracted in 200 components = -2.59278e-05 Jy
! Clean residual min=-0.000782 max=0.000782 Jy/beam
! Clean residual mean=-0.000004 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.109042 Jy
! Adding 106 model components to the UV plane model.
! The established model now contains 187 components and 0.109042 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.5939 mas, bmaj=2.501 mas, bpa=-13.19 degrees
! Estimated noise=0.547464 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000478614 Jy
! Component: 100  -  total flux cleaned = 0.000209193 Jy
! Component: 150  -  total flux cleaned = -3.82291e-05 Jy
! Component: 200  -  total flux cleaned = -0.000188081 Jy
! Total flux subtracted in 200 components = -0.000188081 Jy
! Clean residual min=-0.000330 max=0.000329 Jy/beam
! Clean residual mean=-0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.108854 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 235 components and 0.108854 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.090146Jy  sigma=0.779130
! Fit after  self-cal, rms=0.090167Jy  sigma=0.779100
wmodel /scr/pima/gc030_uvs/J1043-0553_X_map.mod
! Writing 235 model components to file: /scr/pima/gc030_uvs/J1043-0553_X_map.mod
wobs /scr/pima/gc030_uvs/J1043-0553_X_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J1043-0553_X_uvs.fits
wwins /scr/pima/gc030_uvs/J1043-0553_X_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /home/lpetrov/bin/01_muppet]
! 
wmap "/scr/pima/gc030_uvs/J1043-0553_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.5939 x 2.501 at -13.19 degrees (North through East)
! Clean map  min=-0.0018372  max=0.088353 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J1043-0553_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0883525 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.82642e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.333655 0.333655 0.66731 1.33462 2.66924 5.33848 10.677 21.3539 42.7078 85.4157
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0002 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.088 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  899.132 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J1043-0553_X_uvs.log closed on Fri Apr 22 08:46:47 2016