! Started logfile: /scr/pima/gc030_uvs/J0052+0035_S_uvs.log on Fri Apr 22 07:43:19 2016
obs /scr/pima/gc030_uvs/J0052+0035_S_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J0052+0035_S_uva.fits
! AN table 1: 140 integrations on 28 of 28 possible baselines.
! AN table 2: 65 integrations on 6 of 6 possible baselines.
! Apparent sampling: 0.332947 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0052+0035
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22724e+09        8e+06          1        8e+06
!  02        2  2.23499e+09        8e+06          1        8e+06
!  03        3  2.24324e+09        8e+06          1        8e+06
!  04        4  2.25099e+09        8e+06          1        8e+06
!  05        5  2.25924e+09        8e+06          1        8e+06
!  06        6  2.26699e+09        8e+06          1        8e+06
!  07        7  2.27524e+09        8e+06          1        8e+06
!  08        8  2.28299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 11480 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J0052+0035_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 570 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004157Jy  sigma=8.871586
! Fit after  self-cal, rms=0.932717Jy  sigma=8.025394
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.74 mas, bmaj=9.701 mas, bpa=-10.83 degrees
! Estimated noise=2.43706 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.050926 Jy
! Component: 100  -  total flux cleaned = 0.0630765 Jy
! Total flux subtracted in 100 components = 0.0630765 Jy
! Clean residual min=-0.009868 max=0.009145 Jy/beam
! Clean residual mean=0.000041 rms=0.002460 Jy/beam
! Combined flux in latest and established models = 0.0630765 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 9 components and 0.0630765 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.087186Jy  sigma=0.631828
! Fit after  self-cal, rms=0.085800Jy  sigma=0.618988
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.227 mas, bmaj=11.12 mas, bpa=-10.96 degrees
! Estimated noise=0.912466 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00934079 Jy
! Component: 100  -  total flux cleaned = 0.0139268 Jy
! Component: 150  -  total flux cleaned = 0.0165499 Jy
! Component: 200  -  total flux cleaned = 0.0180945 Jy
! Total flux subtracted in 200 components = 0.0180945 Jy
! Clean residual min=-0.006920 max=0.006799 Jy/beam
! Clean residual mean=0.000036 rms=0.002171 Jy/beam
! Combined flux in latest and established models = 0.081171 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 35 components and 0.081171 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084652Jy  sigma=0.610764
! Fit after  self-cal, rms=0.084591Jy  sigma=0.610039
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.227 x 11.12 at -10.96 degrees (North through East)
! Clean map  min=-0.0069918  max=0.069776 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     EB        1.15     HN        0.83     KP        0.86     
!   LA        0.85     NL        1.01     PT        1.13     SC        0.83     
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    EB        1.00*    HN        1.00*    KP        1.00*    
!   LA        1.00*    NL        1.00*    PT        1.00*    SC        1.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     EB        1.10     HN        0.85     KP        0.89     
!   LA        0.87     NL        0.98     PT        1.12     SC        0.87     
! 
!  Telescope amplitude corrections in sub-array 2:
!   KP        1.00*    LA        1.00*    MK        1.00*    PT        1.00*    
! 
! 
! Fit before self-cal, rms=0.084591Jy  sigma=0.610039
! Fit after  self-cal, rms=0.083349Jy  sigma=0.609094
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.249 mas, bmaj=11.12 mas, bpa=-11.08 degrees
! Estimated noise=0.911352 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00107398 Jy
! Component: 100  -  total flux cleaned = 0.00127976 Jy
! Component: 150  -  total flux cleaned = 0.00132349 Jy
! Component: 200  -  total flux cleaned = 0.00138054 Jy
! Total flux subtracted in 200 components = 0.00138054 Jy
! Clean residual min=-0.006264 max=0.006420 Jy/beam
! Clean residual mean=0.000033 rms=0.001955 Jy/beam
! Combined flux in latest and established models = 0.0825515 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 41 components and 0.0825515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083325Jy  sigma=0.608939
! Fit after  self-cal, rms=0.083326Jy  sigma=0.608316
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083326Jy  sigma=0.608316
! Fit after  self-cal, rms=0.083568Jy  sigma=0.608166
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.255 mas, bmaj=11.11 mas, bpa=-11.12 degrees
! Estimated noise=0.913075 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000449499 Jy
! Component: 100  -  total flux cleaned = 0.000448755 Jy
! Component: 150  -  total flux cleaned = 0.00043217 Jy
! Component: 200  -  total flux cleaned = 0.000432374 Jy
! Total flux subtracted in 200 components = 0.000432374 Jy
! Clean residual min=-0.006263 max=0.006410 Jy/beam
! Clean residual mean=0.000033 rms=0.001950 Jy/beam
! Combined flux in latest and established models = 0.0829839 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 43 components and 0.0829839 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083559Jy  sigma=0.608101
! Fit after  self-cal, rms=0.083610Jy  sigma=0.607993
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00014429 Jy
! Component: 100  -  total flux cleaned = 0.000126771 Jy
! Component: 150  -  total flux cleaned = 0.000126883 Jy
! Component: 200  -  total flux cleaned = 0.000111333 Jy
! Total flux subtracted in 200 components = 0.000111333 Jy
! Clean residual min=-0.006340 max=0.006514 Jy/beam
! Clean residual mean=0.000032 rms=0.001962 Jy/beam
! Combined flux in latest and established models = 0.0830952 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 46 components and 0.0830952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083604Jy  sigma=0.607934
! Fit after  self-cal, rms=0.083583Jy  sigma=0.607853
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083583Jy  sigma=0.607853
! Fit after  self-cal, rms=0.083875Jy  sigma=0.607799
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.258 mas, bmaj=11.11 mas, bpa=-11.15 degrees
! Estimated noise=0.914452 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.40703e-05 Jy
! Component: 100  -  total flux cleaned = 5.60146e-05 Jy
! Component: 150  -  total flux cleaned = 5.5949e-05 Jy
! Component: 200  -  total flux cleaned = 4.09117e-05 Jy
! Total flux subtracted in 200 components = 4.09117e-05 Jy
! Clean residual min=-0.006265 max=0.006424 Jy/beam
! Clean residual mean=0.000033 rms=0.001950 Jy/beam
! Combined flux in latest and established models = 0.0831361 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 47 components and 0.0831361 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083868Jy  sigma=0.607740
! Fit after  self-cal, rms=0.083895Jy  sigma=0.607551
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.42469e-05 Jy
! Component: 100  -  total flux cleaned = 1.40542e-05 Jy
! Component: 150  -  total flux cleaned = -1.70026e-05 Jy
! Component: 200  -  total flux cleaned = -3.18742e-05 Jy
! Total flux subtracted in 200 components = -3.18742e-05 Jy
! Clean residual min=-0.006283 max=0.006510 Jy/beam
! Clean residual mean=0.000033 rms=0.001956 Jy/beam
! Combined flux in latest and established models = 0.0831043 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 54 components and 0.0831043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083890Jy  sigma=0.607491
! Fit after  self-cal, rms=0.083887Jy  sigma=0.607480
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.083887Jy  sigma=0.607480
! Fit after  self-cal, rms=0.084099Jy  sigma=0.607458
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.915 mas, bmaj=18.66 mas, bpa=-24.09 degrees
! Estimated noise=1.26989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000133241 Jy
! Component: 100  -  total flux cleaned = 0.000133718 Jy
! Component: 150  -  total flux cleaned = 0.000116229 Jy
! Component: 200  -  total flux cleaned = 0.000117316 Jy
! Total flux subtracted in 200 components = 0.000117316 Jy
! Clean residual min=-0.010200 max=0.008511 Jy/beam
! Clean residual mean=0.000073 rms=0.003661 Jy/beam
! Combined flux in latest and established models = 0.0832216 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 64 components and 0.0832216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084096Jy  sigma=0.607543
! Fit after  self-cal, rms=0.084145Jy  sigma=0.607413
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.50389e-05 Jy
! Component: 100  -  total flux cleaned = 7.98838e-05 Jy
! Component: 150  -  total flux cleaned = 6.39928e-05 Jy
! Component: 200  -  total flux cleaned = 6.42935e-05 Jy
! Total flux subtracted in 200 components = 6.42935e-05 Jy
! Clean residual min=-0.010195 max=0.008519 Jy/beam
! Clean residual mean=0.000073 rms=0.003663 Jy/beam
! Combined flux in latest and established models = 0.0832859 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 67 components and 0.0832859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084146Jy  sigma=0.607478
! Fit after  self-cal, rms=0.084165Jy  sigma=0.607449
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=11.1 mas, bpa=-11.16 degrees
! Estimated noise=0.91516 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.26 x 11.1 at -11.16 degrees (North through East)
! Clean map  min=-0.0061651  max=0.069937 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.766 mas, bmaj=9.608 mas, bpa=-10.95 degrees
! Estimated noise=2.45785 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.051356 Jy
! Component: 100  -  total flux cleaned = 0.0638781 Jy
! Component: 150  -  total flux cleaned = 0.0702251 Jy
! Component: 200  -  total flux cleaned = 0.0742001 Jy
! Total flux subtracted in 200 components = 0.0742001 Jy
! Clean residual min=-0.007211 max=0.007220 Jy/beam
! Clean residual mean=0.000028 rms=0.001990 Jy/beam
! Combined flux in latest and established models = 0.0742001 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 19 model components to the UV plane model.
! The established model now contains 19 components and 0.0742001 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=11.1 mas, bpa=-11.16 degrees
! Estimated noise=0.91516 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00457729 Jy
! Component: 100  -  total flux cleaned = 0.00697826 Jy
! Component: 150  -  total flux cleaned = 0.00835956 Jy
! Component: 200  -  total flux cleaned = 0.00862567 Jy
! Total flux subtracted in 200 components = 0.00862567 Jy
! Clean residual min=-0.006309 max=0.006568 Jy/beam
! Clean residual mean=0.000034 rms=0.001976 Jy/beam
! Combined flux in latest and established models = 0.0828258 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 32 components and 0.0828258 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.915 mas, bmaj=18.66 mas, bpa=-24.09 degrees
! Estimated noise=1.26989 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000547014 Jy
! Component: 100  -  total flux cleaned = 0.000581255 Jy
! Component: 150  -  total flux cleaned = 0.000578537 Jy
! Component: 200  -  total flux cleaned = 0.000578242 Jy
! Total flux subtracted in 200 components = 0.000578242 Jy
! Clean residual min=-0.010240 max=0.008591 Jy/beam
! Clean residual mean=0.000072 rms=0.003684 Jy/beam
! Combined flux in latest and established models = 0.083404 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.94213e-05 Jy
! Component: 100  -  total flux cleaned = -1.93545e-05 Jy
! Component: 150  -  total flux cleaned = -3.6003e-05 Jy
! Component: 200  -  total flux cleaned = -5.26303e-05 Jy
! Total flux subtracted in 200 components = -5.26303e-05 Jy
! Clean residual min=-0.010215 max=0.008561 Jy/beam
! Clean residual mean=0.000073 rms=0.003678 Jy/beam
! Combined flux in latest and established models = 0.0833514 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 47 components and 0.0833514 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=11.1 mas, bpa=-11.16 degrees
! Estimated noise=0.91516 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000104378 Jy
! Component: 100  -  total flux cleaned = 6.68943e-05 Jy
! Component: 150  -  total flux cleaned = 3.76924e-05 Jy
! Component: 200  -  total flux cleaned = 8.03617e-05 Jy
! Total flux subtracted in 200 components = 8.03617e-05 Jy
! Clean residual min=-0.006337 max=0.006634 Jy/beam
! Clean residual mean=0.000032 rms=0.001976 Jy/beam
! Combined flux in latest and established models = 0.0834317 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 58 components and 0.0834317 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.084181Jy  sigma=0.607565
! Fit after  self-cal, rms=0.084161Jy  sigma=0.607432
wmodel /scr/pima/gc030_uvs/J0052+0035_S_map.mod
! Writing 58 model components to file: /scr/pima/gc030_uvs/J0052+0035_S_map.mod
wobs /scr/pima/gc030_uvs/J0052+0035_S_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J0052+0035_S_uvs.fits
wwins /scr/pima/gc030_uvs/J0052+0035_S_map.win
! wwins: Wrote 1 windows to /scr/pima/gc030_uvs/J0052+0035_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.92147e-05 Jy
! Component: 100  -  total flux cleaned = -0.00061544 Jy
! Component: 150  -  total flux cleaned = -0.00119014 Jy
! Component: 200  -  total flux cleaned = -0.00168607 Jy
! Component: 250  -  total flux cleaned = -0.0023705 Jy
! Component: 300  -  total flux cleaned = -0.00287459 Jy
! Component: 350  -  total flux cleaned = -0.00342832 Jy
! Component: 400  -  total flux cleaned = -0.00397428 Jy
! Component: 450  -  total flux cleaned = -0.00451351 Jy
! Component: 500  -  total flux cleaned = -0.00500652 Jy
! Component: 550  -  total flux cleaned = -0.00545635 Jy
! Component: 600  -  total flux cleaned = -0.00604408 Jy
! Component: 650  -  total flux cleaned = -0.0066018 Jy
! Component: 700  -  total flux cleaned = -0.00710713 Jy
! Component: 750  -  total flux cleaned = -0.00742369 Jy
! Component: 800  -  total flux cleaned = -0.00767697 Jy
! Component: 850  -  total flux cleaned = -0.00789794 Jy
! Component: 900  -  total flux cleaned = -0.00811602 Jy
! Component: 950  -  total flux cleaned = -0.00830514 Jy
! Component: 1000  -  total flux cleaned = -0.0084669 Jy
! Component: 1050  -  total flux cleaned = -0.00865527 Jy
! Component: 1100  -  total flux cleaned = -0.00887051 Jy
! Component: 1150  -  total flux cleaned = -0.00900566 Jy
! Component: 1200  -  total flux cleaned = -0.00903285 Jy
! Component: 1250  -  total flux cleaned = -0.00911599 Jy
! Component: 1300  -  total flux cleaned = -0.00917214 Jy
! Component: 1350  -  total flux cleaned = -0.00922893 Jy
! Component: 1400  -  total flux cleaned = -0.009316 Jy
! Component: 1450  -  total flux cleaned = -0.00940509 Jy
! Component: 1500  -  total flux cleaned = -0.0094353 Jy
! Component: 1550  -  total flux cleaned = -0.00949732 Jy
! Component: 1600  -  total flux cleaned = -0.0095288 Jy
! Component: 1650  -  total flux cleaned = -0.00956092 Jy
! Component: 1700  -  total flux cleaned = -0.00962719 Jy
! Component: 1750  -  total flux cleaned = -0.00969597 Jy
! Component: 1800  -  total flux cleaned = -0.00973115 Jy
! Component: 1850  -  total flux cleaned = -0.00980371 Jy
! Component: 1900  -  total flux cleaned = -0.00987843 Jy
! Component: 1950  -  total flux cleaned = -0.00987846 Jy
! Component: 2000  -  total flux cleaned = -0.00991817 Jy
! Component: 2050  -  total flux cleaned = -0.00991858 Jy
! Component: 2100  -  total flux cleaned = -0.00991868 Jy
! Component: 2150  -  total flux cleaned = -0.00996219 Jy
! Component: 2200  -  total flux cleaned = -0.00996236 Jy
! Component: 2250  -  total flux cleaned = -0.0099624 Jy
! Component: 2300  -  total flux cleaned = -0.00996279 Jy
! Component: 2350  -  total flux cleaned = -0.0100117 Jy
! Component: 2400  -  total flux cleaned = -0.0100115 Jy
! Component: 2450  -  total flux cleaned = -0.0100639 Jy
! Component: 2500  -  total flux cleaned = -0.010119 Jy
! Component: 2550  -  total flux cleaned = -0.0101204 Jy
! Component: 2600  -  total flux cleaned = -0.0101206 Jy
! Component: 2650  -  total flux cleaned = -0.0101205 Jy
! Component: 2700  -  total flux cleaned = -0.0101207 Jy
! Component: 2750  -  total flux cleaned = -0.0101219 Jy
! Component: 2800  -  total flux cleaned = -0.0101224 Jy
! Component: 2850  -  total flux cleaned = -0.0100522 Jy
! Component: 2900  -  total flux cleaned = -0.010123 Jy
! Component: 2950  -  total flux cleaned = -0.0100481 Jy
! Component: 3000  -  total flux cleaned = -0.0101249 Jy
! Component: 3050  -  total flux cleaned = -0.0101257 Jy
! Component: 3100  -  total flux cleaned = -0.0101271 Jy
! Component: 3150  -  total flux cleaned = -0.0101264 Jy
! Component: 3200  -  total flux cleaned = -0.0101249 Jy
! Component: 3250  -  total flux cleaned = -0.0102157 Jy
! Component: 3300  -  total flux cleaned = -0.0102147 Jy
! Component: 3350  -  total flux cleaned = -0.010313 Jy
! Component: 3400  -  total flux cleaned = -0.0103125 Jy
! Component: 3450  -  total flux cleaned = -0.0103123 Jy
! Component: 3500  -  total flux cleaned = -0.0104214 Jy
! Component: 3550  -  total flux cleaned = -0.0104231 Jy
! Component: 3600  -  total flux cleaned = -0.0104215 Jy
! Component: 3650  -  total flux cleaned = -0.0104218 Jy
! Component: 3700  -  total flux cleaned = -0.010546 Jy
! Component: 3750  -  total flux cleaned = -0.0105473 Jy
! Component: 3800  -  total flux cleaned = -0.0105464 Jy
! Component: 3850  -  total flux cleaned = -0.0106896 Jy
! Component: 3900  -  total flux cleaned = -0.0106908 Jy
! Component: 3950  -  total flux cleaned = -0.0106918 Jy
! Component: 4000  -  total flux cleaned = -0.010691 Jy
! Component: 4050  -  total flux cleaned = -0.0106894 Jy
! Total flux subtracted in 4096 components = -0.0106878 Jy
! Clean residual min=-0.010340 max=0.009262 Jy/beam
! Clean residual mean=-0.000065 rms=0.002482 Jy/beam
! Combined flux in latest and established models = 0.072744 Jy
keep
! Adding 186 model components to the UV plane model.
! The established model now contains 244 components and 0.072744 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J0052+0035_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.26 x 11.1 at -11.16 degrees (North through East)
! Clean map  min=-0.010933  max=0.07168 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J0052+0035_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0716797 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00244122 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -10.2172 10.2172 20.4344 40.8688 81.7376
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0073 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.071 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  29.362 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J0052+0035_S_uvs.log closed on Fri Apr 22 07:43:23 2016