! Started logfile: /scr/pima/gc030_uvs/J0006+1235_S_uvs.log on Fri Apr 22 07:43:11 2016
obs /scr/pima/gc030_uvs/J0006+1235_S_uva.fits
! Reading UV FITS file: /scr/pima/gc030_uvs/J0006+1235_S_uva.fits
! AN table 1: 279 integrations on 36 of 36 possible baselines.
! AN table 2: 70 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.565711 visibilities/baseline/integration-bin.
! Found source: J0006+1235
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.22724e+09        8e+06          1        8e+06
!  02        2  2.23499e+09        8e+06          1        8e+06
!  03        3  2.24324e+09        8e+06          1        8e+06
!  04        4  2.25099e+09        8e+06          1        8e+06
!  05        5  2.25924e+09        8e+06          1        8e+06
!  06        6  2.26699e+09        8e+06          1        8e+06
!  07        7  2.27524e+09        8e+06          1        8e+06
!  08        8  2.28299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 139 lines of history.
! 
! Reading 48624 visibilities.
select rr, 1,2,3,4,6,7,8 
! Selecting polarization: RR,  channels: 1..4 6..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: (none)
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /scr/pima/gc030_uvs/J0006+1235_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 718 telescope corrections were flagged in sub-array 1.
!  A total of 5 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.010114Jy  sigma=8.590192
! Fit after  self-cal, rms=0.915690Jy  sigma=7.814279
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.923 mas, bmaj=6.007 mas, bpa=-9.299 degrees
! Estimated noise=0.910795 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0616474 Jy
! Component: 100  -  total flux cleaned = 0.0817924 Jy
! Total flux subtracted in 100 components = 0.0817924 Jy
! Clean residual min=-0.006763 max=0.012613 Jy/beam
! Clean residual mean=-0.000009 rms=0.001671 Jy/beam
! Combined flux in latest and established models = 0.0817924 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0817924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.107316Jy  sigma=0.830051
! Fit after  self-cal, rms=0.105591Jy  sigma=0.819272
! Inverting map 
! Added new window around map position (6, 1.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0147264 Jy
! Component: 100  -  total flux cleaned = 0.0237851 Jy
! Total flux subtracted in 100 components = 0.0237851 Jy
! Clean residual min=-0.004934 max=0.006827 Jy/beam
! Clean residual mean=-0.000006 rms=0.001263 Jy/beam
! Combined flux in latest and established models = 0.105577 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 15 components and 0.105577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.102458Jy  sigma=0.791924
! Fit after  self-cal, rms=0.101986Jy  sigma=0.789630
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00808195 Jy
! Component: 100  -  total flux cleaned = 0.0135539 Jy
! Total flux subtracted in 100 components = 0.0135539 Jy
! Clean residual min=-0.004612 max=0.005495 Jy/beam
! Clean residual mean=-0.000004 rms=0.001105 Jy/beam
! Combined flux in latest and established models = 0.119131 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 20 components and 0.119131 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.100929Jy  sigma=0.780148
! Fit after  self-cal, rms=0.100772Jy  sigma=0.779404
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.334 mas, bmaj=6.816 mas, bpa=-7.883 degrees
! Estimated noise=0.4277 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (3, 0).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00828096 Jy
! Component: 100  -  total flux cleaned = 0.0129529 Jy
! Component: 150  -  total flux cleaned = 0.0162008 Jy
! Component: 200  -  total flux cleaned = 0.0180632 Jy
! Total flux subtracted in 200 components = 0.0180632 Jy
! Clean residual min=-0.003756 max=0.003896 Jy/beam
! Clean residual mean=-0.000007 rms=0.000921 Jy/beam
! Combined flux in latest and established models = 0.137195 Jy
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 57 components and 0.137195 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.100090Jy  sigma=0.772869
! Fit after  self-cal, rms=0.099948Jy  sigma=0.771907
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.334 x 6.816 at -7.883 degrees (North through East)
! Clean map  min=-0.003575  max=0.085311 Jy/beam
if ( peak(flux,max)/imstat(rms) < lim_self ) selflim lim_val
! Selfcal amplitude corrections will be limited to 0.833333 -> 1.2.
! Selfcal phase corrections will not be limited.
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     EB        1.05     HN        1.00     KP        0.93     
!   LA        0.91     NL        1.02     OV        0.98     PT        1.04     
!   SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     KP        0.95     LA        0.91     MK        1.14     
!   PT        1.08     
! 
! 
! Correcting IF 2.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     EB        1.03     HN        1.01     KP        0.98     
!   LA        0.92     NL        0.99     OV        0.94     PT        1.05     
!   SC        1.06     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     KP        0.96     LA        0.94     MK        1.07     
!   PT        1.06     
! 
! 
! Correcting IF 3.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     EB        0.96     HN        1.01     KP        0.95     
!   LA        0.95     NL        0.99     OV        0.96     PT        1.05     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     KP        0.89     LA        0.92     MK        1.10     
!   PT        1.08     
! 
! 
! Correcting IF 4.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     EB        1.02     HN        1.01     KP        1.00     
!   LA        0.94     NL        0.97     OV        0.94     PT        1.05     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     KP        1.04     LA        0.90     MK        1.02     
!   PT        1.04     
! 
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     EB        1.02     HN        0.96     KP        0.95     
!   LA        0.97     NL        1.01     OV        0.94     PT        1.05     
!   SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.93     KP        0.95     LA        0.93     MK        1.12     
!   PT        1.01     
! 
! 
! Correcting IF 7.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     EB        0.99     HN        0.93     KP        0.96     
!   LA        0.96     NL        0.96     OV        0.91     PT        1.06     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     KP        0.94     LA        0.98     MK        1.01     
!   PT        1.06     
! 
! 
! Correcting IF 8.
!  A total of 207 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     EB        0.99     HN        0.98     KP        0.94     
!   LA        0.94     NL        0.98     OV        0.90     PT        1.06     
!   SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     KP        0.97     LA        0.96     MK        0.93     
!   PT        1.08     
! 
! 
! Fit before self-cal, rms=0.099948Jy  sigma=0.771907
! Fit after  self-cal, rms=0.098664Jy  sigma=0.774133
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=6.925 mas, bpa=-7.616 degrees
! Estimated noise=0.428428 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000852587 Jy
! Component: 100  -  total flux cleaned = 0.00119765 Jy
! Component: 150  -  total flux cleaned = 0.00136778 Jy
! Component: 200  -  total flux cleaned = 0.00155417 Jy
! Total flux subtracted in 200 components = 0.00155417 Jy
! Clean residual min=-0.002988 max=0.002929 Jy/beam
! Clean residual mean=-0.000004 rms=0.000716 Jy/beam
! Combined flux in latest and established models = 0.138749 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 76 components and 0.138749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098556Jy  sigma=0.773454
! Fit after  self-cal, rms=0.098654Jy  sigma=0.773127
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098654Jy  sigma=0.773127
! Fit after  self-cal, rms=0.099524Jy  sigma=0.771726
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.36 mas, bmaj=6.912 mas, bpa=-7.486 degrees
! Estimated noise=0.426987 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000718241 Jy
! Component: 100  -  total flux cleaned = 0.000959146 Jy
! Component: 150  -  total flux cleaned = 0.00121376 Jy
! Component: 200  -  total flux cleaned = 0.00131091 Jy
! Total flux subtracted in 200 components = 0.00131091 Jy
! Clean residual min=-0.002293 max=0.002212 Jy/beam
! Clean residual mean=-0.000002 rms=0.000592 Jy/beam
! Combined flux in latest and established models = 0.14006 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 91 components and 0.14006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099471Jy  sigma=0.771434
! Fit after  self-cal, rms=0.099611Jy  sigma=0.771219
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000475077 Jy
! Component: 100  -  total flux cleaned = 0.000577627 Jy
! Component: 150  -  total flux cleaned = 0.000607209 Jy
! Component: 200  -  total flux cleaned = 0.000684439 Jy
! Total flux subtracted in 200 components = 0.000684439 Jy
! Clean residual min=-0.002280 max=0.002178 Jy/beam
! Clean residual mean=-0.000002 rms=0.000594 Jy/beam
! Combined flux in latest and established models = 0.140744 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 100 components and 0.140744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099586Jy  sigma=0.771087
! Fit after  self-cal, rms=0.099587Jy  sigma=0.771021
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099587Jy  sigma=0.771021
! Fit after  self-cal, rms=0.099070Jy  sigma=0.770920
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.359 mas, bmaj=6.895 mas, bpa=-7.482 degrees
! Estimated noise=0.423854 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000148936 Jy
! Component: 100  -  total flux cleaned = 0.000412508 Jy
! Component: 150  -  total flux cleaned = 0.000599164 Jy
! Component: 200  -  total flux cleaned = 0.000670539 Jy
! Total flux subtracted in 200 components = 0.000670539 Jy
! Clean residual min=-0.002189 max=0.002043 Jy/beam
! Clean residual mean=-0.000002 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.141415 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 106 components and 0.141415 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099041Jy  sigma=0.770809
! Fit after  self-cal, rms=0.099074Jy  sigma=0.770778
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000287878 Jy
! Component: 100  -  total flux cleaned = 0.00026363 Jy
! Component: 150  -  total flux cleaned = 0.000241742 Jy
! Component: 200  -  total flux cleaned = 0.000242459 Jy
! Total flux subtracted in 200 components = 0.000242459 Jy
! Clean residual min=-0.002179 max=0.002020 Jy/beam
! Clean residual mean=-0.000001 rms=0.000563 Jy/beam
! Combined flux in latest and established models = 0.141657 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 111 components and 0.141657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099060Jy  sigma=0.770702
! Fit after  self-cal, rms=0.099068Jy  sigma=0.770688
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.099068Jy  sigma=0.770688
! Fit after  self-cal, rms=0.098445Jy  sigma=0.770648
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.884 mas, bmaj=9.915 mas, bpa=5.709 degrees
! Estimated noise=0.589409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.57987e-05 Jy
! Component: 100  -  total flux cleaned = 4.65472e-05 Jy
! Component: 150  -  total flux cleaned = 4.74498e-05 Jy
! Component: 200  -  total flux cleaned = 4.74454e-05 Jy
! Total flux subtracted in 200 components = 4.74454e-05 Jy
! Clean residual min=-0.003478 max=0.002928 Jy/beam
! Clean residual mean=-0.000004 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.141705 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 119 components and 0.141705 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098435Jy  sigma=0.770604
! Fit after  self-cal, rms=0.098434Jy  sigma=0.770506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.6133e-05 Jy
! Component: 100  -  total flux cleaned = 2.54935e-05 Jy
! Component: 150  -  total flux cleaned = 3.92596e-06 Jy
! Component: 200  -  total flux cleaned = -3.4332e-05 Jy
! Total flux subtracted in 200 components = -3.4332e-05 Jy
! Clean residual min=-0.003438 max=0.002913 Jy/beam
! Clean residual mean=-0.000004 rms=0.000864 Jy/beam
! Combined flux in latest and established models = 0.14167 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 129 components and 0.14167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098428Jy  sigma=0.770482
! Fit after  self-cal, rms=0.098436Jy  sigma=0.770450
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.358 mas, bmaj=6.88 mas, bpa=-7.502 degrees
! Estimated noise=0.421193 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.358 x 6.88 at -7.502 degrees (North through East)
! Clean map  min=-0.0021121  max=0.079039 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.93 mas, bmaj=6.052 mas, bpa=-8.767 degrees
! Estimated noise=0.914736 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.05931 Jy
! Component: 100  -  total flux cleaned = 0.083529 Jy
! Component: 150  -  total flux cleaned = 0.0985572 Jy
! Component: 200  -  total flux cleaned = 0.108966 Jy
! Total flux subtracted in 200 components = 0.108966 Jy
! Clean residual min=-0.005073 max=0.005794 Jy/beam
! Clean residual mean=-0.000005 rms=0.001068 Jy/beam
! Combined flux in latest and established models = 0.108966 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.108966 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.358 mas, bmaj=6.88 mas, bpa=-7.502 degrees
! Estimated noise=0.421193 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113585 Jy
! Component: 100  -  total flux cleaned = 0.0180801 Jy
! Component: 150  -  total flux cleaned = 0.022579 Jy
! Component: 200  -  total flux cleaned = 0.0257606 Jy
! Total flux subtracted in 200 components = 0.0257606 Jy
! Clean residual min=-0.002552 max=0.002441 Jy/beam
! Clean residual mean=-0.000004 rms=0.000638 Jy/beam
! Combined flux in latest and established models = 0.134727 Jy
! Adding 53 model components to the UV plane model.
! The established model now contains 66 components and 0.134727 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.884 mas, bmaj=9.915 mas, bpa=5.709 degrees
! Estimated noise=0.589409 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00381913 Jy
! Component: 100  -  total flux cleaned = 0.00574231 Jy
! Component: 150  -  total flux cleaned = 0.00609637 Jy
! Component: 200  -  total flux cleaned = 0.00625152 Jy
! Total flux subtracted in 200 components = 0.00625152 Jy
! Clean residual min=-0.003561 max=0.002939 Jy/beam
! Clean residual mean=-0.000005 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.140978 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.7826e-05 Jy
! Component: 100  -  total flux cleaned = 0.000206944 Jy
! Component: 150  -  total flux cleaned = 0.000276595 Jy
! Component: 200  -  total flux cleaned = 0.00035555 Jy
! Total flux subtracted in 200 components = 0.00035555 Jy
! Clean residual min=-0.003413 max=0.002923 Jy/beam
! Clean residual mean=-0.000004 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.141334 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 98 components and 0.141334 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.358 mas, bmaj=6.88 mas, bpa=-7.502 degrees
! Estimated noise=0.421193 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000169645 Jy
! Component: 100  -  total flux cleaned = 0.000242021 Jy
! Component: 150  -  total flux cleaned = 0.00030329 Jy
! Component: 200  -  total flux cleaned = 0.000409665 Jy
! Total flux subtracted in 200 components = 0.000409665 Jy
! Clean residual min=-0.002220 max=0.001979 Jy/beam
! Clean residual mean=-0.000001 rms=0.000549 Jy/beam
! Combined flux in latest and established models = 0.141743 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 111 components and 0.141743 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Not correcting unselected IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.098415Jy  sigma=0.770477
! Fit after  self-cal, rms=0.098405Jy  sigma=0.770356
wmodel /scr/pima/gc030_uvs/J0006+1235_S_map.mod
! Writing 111 model components to file: /scr/pima/gc030_uvs/J0006+1235_S_map.mod
wobs /scr/pima/gc030_uvs/J0006+1235_S_uvs.fits
! Writing UV FITS file: /scr/pima/gc030_uvs/J0006+1235_S_uvs.fits
wwins /scr/pima/gc030_uvs/J0006+1235_S_map.win
! wwins: Wrote 3 windows to /scr/pima/gc030_uvs/J0006+1235_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000840195 Jy
! Component: 100  -  total flux cleaned = -0.00134847 Jy
! Component: 150  -  total flux cleaned = -0.00176146 Jy
! Component: 200  -  total flux cleaned = -0.00222169 Jy
! Component: 250  -  total flux cleaned = -0.00260111 Jy
! Component: 300  -  total flux cleaned = -0.00284571 Jy
! Component: 350  -  total flux cleaned = -0.00302241 Jy
! Component: 400  -  total flux cleaned = -0.00310752 Jy
! Component: 450  -  total flux cleaned = -0.00324498 Jy
! Component: 500  -  total flux cleaned = -0.00332497 Jy
! Component: 550  -  total flux cleaned = -0.00342868 Jy
! Component: 600  -  total flux cleaned = -0.00347869 Jy
! Component: 650  -  total flux cleaned = -0.00352728 Jy
! Component: 700  -  total flux cleaned = -0.00350298 Jy
! Component: 750  -  total flux cleaned = -0.00354939 Jy
! Component: 800  -  total flux cleaned = -0.00359493 Jy
! Component: 850  -  total flux cleaned = -0.00372787 Jy
! Component: 900  -  total flux cleaned = -0.00377074 Jy
! Component: 950  -  total flux cleaned = -0.00377029 Jy
! Component: 1000  -  total flux cleaned = -0.00377051 Jy
! Component: 1050  -  total flux cleaned = -0.00389263 Jy
! Component: 1100  -  total flux cleaned = -0.00399223 Jy
! Component: 1150  -  total flux cleaned = -0.00401193 Jy
! Component: 1200  -  total flux cleaned = -0.00410797 Jy
! Component: 1250  -  total flux cleaned = -0.00420202 Jy
! Component: 1300  -  total flux cleaned = -0.00425713 Jy
! Component: 1350  -  total flux cleaned = -0.00431156 Jy
! Component: 1400  -  total flux cleaned = -0.00438309 Jy
! Component: 1450  -  total flux cleaned = -0.00445384 Jy
! Component: 1500  -  total flux cleaned = -0.00450595 Jy
! Component: 1550  -  total flux cleaned = -0.00464268 Jy
! Component: 1600  -  total flux cleaned = -0.00474352 Jy
! Component: 1650  -  total flux cleaned = -0.00487593 Jy
! Component: 1700  -  total flux cleaned = -0.00502198 Jy
! Component: 1750  -  total flux cleaned = -0.00506971 Jy
! Component: 1800  -  total flux cleaned = -0.00511714 Jy
! Component: 1850  -  total flux cleaned = -0.0051953 Jy
! Component: 1900  -  total flux cleaned = -0.00527191 Jy
! Component: 1950  -  total flux cleaned = -0.00533243 Jy
! Component: 2000  -  total flux cleaned = -0.00542203 Jy
! Component: 2050  -  total flux cleaned = -0.00546634 Jy
! Component: 2100  -  total flux cleaned = -0.00553934 Jy
! Component: 2150  -  total flux cleaned = -0.00561105 Jy
! Component: 2200  -  total flux cleaned = -0.00565381 Jy
! Component: 2250  -  total flux cleaned = -0.00573777 Jy
! Component: 2300  -  total flux cleaned = -0.00582081 Jy
! Component: 2350  -  total flux cleaned = -0.00587534 Jy
! Component: 2400  -  total flux cleaned = -0.00594328 Jy
! Component: 2450  -  total flux cleaned = -0.00606392 Jy
! Component: 2500  -  total flux cleaned = -0.00618295 Jy
! Component: 2550  -  total flux cleaned = -0.00628774 Jy
! Component: 2600  -  total flux cleaned = -0.00633962 Jy
! Component: 2650  -  total flux cleaned = -0.00644244 Jy
! Component: 2700  -  total flux cleaned = -0.00653112 Jy
! Component: 2750  -  total flux cleaned = -0.00659404 Jy
! Component: 2800  -  total flux cleaned = -0.00666881 Jy
! Component: 2850  -  total flux cleaned = -0.00673029 Jy
! Component: 2900  -  total flux cleaned = -0.00679143 Jy
! Component: 2950  -  total flux cleaned = -0.00693658 Jy
! Component: 3000  -  total flux cleaned = -0.00696031 Jy
! Component: 3050  -  total flux cleaned = -0.00703153 Jy
! Component: 3100  -  total flux cleaned = -0.00707847 Jy
! Component: 3150  -  total flux cleaned = -0.00712511 Jy
! Component: 3200  -  total flux cleaned = -0.00717143 Jy
! Component: 3250  -  total flux cleaned = -0.00727469 Jy
! Component: 3300  -  total flux cleaned = -0.00732008 Jy
! Component: 3350  -  total flux cleaned = -0.00736503 Jy
! Component: 3400  -  total flux cleaned = -0.0074097 Jy
! Component: 3450  -  total flux cleaned = -0.00745411 Jy
! Component: 3500  -  total flux cleaned = -0.00750903 Jy
! Component: 3550  -  total flux cleaned = -0.00755265 Jy
! Component: 3600  -  total flux cleaned = -0.00762843 Jy
! Component: 3650  -  total flux cleaned = -0.00767142 Jy
! Component: 3700  -  total flux cleaned = -0.00774595 Jy
! Component: 3750  -  total flux cleaned = -0.00778814 Jy
! Component: 3800  -  total flux cleaned = -0.00779871 Jy
! Component: 3850  -  total flux cleaned = -0.00788197 Jy
! Component: 3900  -  total flux cleaned = -0.00793374 Jy
! Component: 3950  -  total flux cleaned = -0.00796458 Jy
! Component: 4000  -  total flux cleaned = -0.00801569 Jy
! Component: 4050  -  total flux cleaned = -0.00805622 Jy
! Total flux subtracted in 4096 components = -0.00817707 Jy
! Clean residual min=-0.000571 max=0.000615 Jy/beam
! Clean residual mean=-0.000001 rms=0.000181 Jy/beam
! Combined flux in latest and established models = 0.133566 Jy
keep
! Adding 315 model components to the UV plane model.
! The established model now contains 426 components and 0.133566 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/gc030_uvs/J0006+1235_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.358 x 6.88 at -7.502 degrees (North through East)
! Clean map  min=-0.0012635  max=0.078152 Jy/beam
! Writing clean map to FITS file: /scr/pima/gc030_uvs/J0006+1235_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0781519 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00017653 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.677641 0.677641 1.35528 2.71056 5.42113 10.8423 21.6845 43.369 86.738
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0005 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.078 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  442.712 
quit
! Quitting program
! Log file /scr/pima/gc030_uvs/J0006+1235_S_uvs.log closed on Fri Apr 22 07:43:18 2016