! Started logfile: /g0/scr/pima/npcsc_uvs/J2349+7517_X_uvs.log on Sun Oct  6 14:27:56 2013
obs /g0/scr/pima/npcsc_uvs/J2349+7517_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_X_uva.fits
! AN table 1: 45 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.622222 visibilities/baseline/integration-bin.
! Found source: J2349+7517
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 5040 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2349+7517_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.002761Jy  sigma=0.743050
! Fit after  self-cal, rms=0.959386Jy  sigma=0.676276
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6845 mas, bmaj=2.765 mas, bpa=2.911 degrees
! Estimated noise=28.5139 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0530141 Jy
! Component: 100  -  total flux cleaned = 0.0628881 Jy
! Total flux subtracted in 100 components = 0.0628881 Jy
! Clean residual min=-0.007752 max=0.007173 Jy/beam
! Clean residual mean=0.000009 rms=0.001705 Jy/beam
! Combined flux in latest and established models = 0.0628881 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.0628881 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075326Jy  sigma=0.060029
! Fit after  self-cal, rms=0.072977Jy  sigma=0.058402
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9543 mas, bmaj=2.91 mas, bpa=1.7 degrees
! Estimated noise=15.2465 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000662724 Jy
! Component: 100  -  total flux cleaned = -0.000252797 Jy
! Component: 150  -  total flux cleaned = -0.000884631 Jy
! Component: 200  -  total flux cleaned = -0.00145235 Jy
! Total flux subtracted in 200 components = -0.00145235 Jy
! Clean residual min=-0.004550 max=0.004811 Jy/beam
! Clean residual mean=0.000018 rms=0.001255 Jy/beam
! Combined flux in latest and established models = 0.0614358 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 8 components and 0.0614358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073993Jy  sigma=0.057272
! Fit after  self-cal, rms=0.073893Jy  sigma=0.057238
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.93     HN        0.86     KP        0.85     
!   LA        0.82     MK        0.89     NL        0.95     OV        0.89     
!   PT        1.00     SC        0.75     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        0.92     HN        0.92     KP        0.87     
!   LA        0.84     MK        0.88     NL        1.00     OV        0.87     
!   PT        1.06     SC        0.77     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.76     FD        0.89     HN        0.76     KP        0.77     
!   LA        0.76     MK        0.81     NL        0.92     OV        0.84     
!   PT        1.02     SC        0.75     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.67     FD        0.91     HN        0.81     KP        0.78     
!   LA        0.79     MK        0.73     NL        1.00     OV        0.86     
!   PT        1.08     SC        0.69     
! 
! 
! Fit before self-cal, rms=0.073893Jy  sigma=0.057238
! Fit after  self-cal, rms=0.063315Jy  sigma=0.054152
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9333 mas, bmaj=2.883 mas, bpa=1.85 degrees
! Estimated noise=11.6683 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0120741 Jy
! Component: 100  -  total flux cleaned = -0.0141173 Jy
! Component: 150  -  total flux cleaned = -0.0137329 Jy
! Component: 200  -  total flux cleaned = -0.0136027 Jy
! Total flux subtracted in 200 components = -0.0136027 Jy
! Clean residual min=-0.002844 max=0.002737 Jy/beam
! Clean residual mean=0.000010 rms=0.000676 Jy/beam
! Combined flux in latest and established models = 0.0478331 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 14 components and 0.0478331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056957Jy  sigma=0.056119
! Fit after  self-cal, rms=0.057047Jy  sigma=0.056032
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057047Jy  sigma=0.056032
! Fit after  self-cal, rms=0.049579Jy  sigma=0.054033
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9305 mas, bmaj=2.881 mas, bpa=1.875 degrees
! Estimated noise=9.10345 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00939004 Jy
! Component: 100  -  total flux cleaned = -0.0110926 Jy
! Component: 150  -  total flux cleaned = -0.010849 Jy
! Component: 200  -  total flux cleaned = -0.0107479 Jy
! Total flux subtracted in 200 components = -0.0107479 Jy
! Clean residual min=-0.002196 max=0.002168 Jy/beam
! Clean residual mean=0.000007 rms=0.000527 Jy/beam
! Combined flux in latest and established models = 0.0370852 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 14 components and 0.0370852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044658Jy  sigma=0.056004
! Fit after  self-cal, rms=0.044675Jy  sigma=0.056001
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.28692e-05 Jy
! Component: 100  -  total flux cleaned = -2.76592e-05 Jy
! Component: 150  -  total flux cleaned = -2.79307e-05 Jy
! Component: 200  -  total flux cleaned = -2.80598e-05 Jy
! Total flux subtracted in 200 components = -2.80598e-05 Jy
! Clean residual min=-0.002211 max=0.002153 Jy/beam
! Clean residual mean=0.000007 rms=0.000526 Jy/beam
! Combined flux in latest and established models = 0.0370571 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 22 components and 0.0370571 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044601Jy  sigma=0.056077
! Fit after  self-cal, rms=0.044611Jy  sigma=0.056075
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044611Jy  sigma=0.056075
! Fit after  self-cal, rms=0.038648Jy  sigma=0.054011
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9263 mas, bmaj=2.882 mas, bpa=1.975 degrees
! Estimated noise=7.12425 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00705751 Jy
! Component: 100  -  total flux cleaned = -0.00844333 Jy
! Component: 150  -  total flux cleaned = -0.00826171 Jy
! Component: 200  -  total flux cleaned = -0.00814413 Jy
! Total flux subtracted in 200 components = -0.00814413 Jy
! Clean residual min=-0.001744 max=0.001672 Jy/beam
! Clean residual mean=0.000006 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.028913 Jy
selfcal
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 22 components and 0.028913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034992Jy  sigma=0.055989
! Fit after  self-cal, rms=0.034997Jy  sigma=0.055986
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.87815e-05 Jy
! Component: 100  -  total flux cleaned = 9.30309e-06 Jy
! Component: 150  -  total flux cleaned = 2.95714e-06 Jy
! Component: 200  -  total flux cleaned = 2.91745e-06 Jy
! Total flux subtracted in 200 components = 2.91745e-06 Jy
! Clean residual min=-0.001771 max=0.001657 Jy/beam
! Clean residual mean=0.000006 rms=0.000411 Jy/beam
! Combined flux in latest and established models = 0.0289159 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 24 components and 0.0289159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034951Jy  sigma=0.056047
! Fit after  self-cal, rms=0.034952Jy  sigma=0.056046
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034952Jy  sigma=0.056046
! Fit after  self-cal, rms=0.030241Jy  sigma=0.053987
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.219 mas, bmaj=3.397 mas, bpa=-7.943 degrees
! Estimated noise=6.88375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00531239 Jy
! Component: 100  -  total flux cleaned = -0.0064763 Jy
! Component: 150  -  total flux cleaned = -0.00659238 Jy
! Component: 200  -  total flux cleaned = -0.00655651 Jy
! Total flux subtracted in 200 components = -0.00655651 Jy
! Clean residual min=-0.001534 max=0.001778 Jy/beam
! Clean residual mean=0.000009 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0223594 Jy
selfcal
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 26 components and 0.0223594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027441Jy  sigma=0.055863
! Fit after  self-cal, rms=0.027440Jy  sigma=0.055859
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.6034e-07 Jy
! Component: 100  -  total flux cleaned = 7.01801e-06 Jy
! Component: 150  -  total flux cleaned = 2.89267e-05 Jy
! Component: 200  -  total flux cleaned = 2.89625e-05 Jy
! Total flux subtracted in 200 components = 2.89625e-05 Jy
! Clean residual min=-0.001523 max=0.001780 Jy/beam
! Clean residual mean=0.000009 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0223884 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 29 components and 0.0223884 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027386Jy  sigma=0.055948
! Fit after  self-cal, rms=0.027385Jy  sigma=0.055945
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9226 mas, bmaj=2.885 mas, bpa=2.083 degrees
! Estimated noise=5.57284 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9226 x 2.885 at 2.083 degrees (North through East)
! Clean map  min=-0.0017454  max=0.025674 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6651 mas, bmaj=2.769 mas, bpa=3.128 degrees
! Estimated noise=10.039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194616 Jy
! Component: 100  -  total flux cleaned = 0.0232875 Jy
! Component: 150  -  total flux cleaned = 0.02294 Jy
! Component: 200  -  total flux cleaned = 0.0226057 Jy
! Total flux subtracted in 200 components = 0.0226057 Jy
! Clean residual min=-0.001748 max=0.002101 Jy/beam
! Clean residual mean=0.000002 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0226057 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0226057 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9226 mas, bmaj=2.885 mas, bpa=2.083 degrees
! Estimated noise=5.57284 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000344895 Jy
! Component: 100  -  total flux cleaned = 0.000160418 Jy
! Component: 150  -  total flux cleaned = 0.000103892 Jy
! Component: 200  -  total flux cleaned = 0.00010271 Jy
! Total flux subtracted in 200 components = 0.00010271 Jy
! Clean residual min=-0.001386 max=0.001319 Jy/beam
! Clean residual mean=0.000005 rms=0.000335 Jy/beam
! Combined flux in latest and established models = 0.0227084 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 21 components and 0.0227084 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.219 mas, bmaj=3.397 mas, bpa=-7.943 degrees
! Estimated noise=6.88375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.28733e-06 Jy
! Component: 100  -  total flux cleaned = -4.9079e-05 Jy
! Component: 150  -  total flux cleaned = -7.17053e-05 Jy
! Component: 200  -  total flux cleaned = -8.99736e-05 Jy
! Total flux subtracted in 200 components = -8.99736e-05 Jy
! Clean residual min=-0.001572 max=0.001785 Jy/beam
! Clean residual mean=0.000009 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.0226185 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.51936e-05 Jy
! Component: 100  -  total flux cleaned = -2.17916e-05 Jy
! Component: 150  -  total flux cleaned = -2.75899e-05 Jy
! Component: 200  -  total flux cleaned = -2.75832e-05 Jy
! Total flux subtracted in 200 components = -2.75832e-05 Jy
! Clean residual min=-0.001545 max=0.001788 Jy/beam
! Clean residual mean=0.000009 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.0225909 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 33 components and 0.0225909 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9226 mas, bmaj=2.885 mas, bpa=2.083 degrees
! Estimated noise=5.57284 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000158738 Jy
! Component: 100  -  total flux cleaned = 0.000192392 Jy
! Component: 150  -  total flux cleaned = 0.000185966 Jy
! Component: 200  -  total flux cleaned = 0.00016649 Jy
! Total flux subtracted in 200 components = 0.00016649 Jy
! Clean residual min=-0.001389 max=0.001319 Jy/beam
! Clean residual mean=0.000005 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0227574 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 38 components and 0.0227574 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.027334Jy  sigma=0.056066
! Fit after  self-cal, rms=0.027333Jy  sigma=0.056059
wmodel /g0/scr/pima/npcsc_uvs/J2349+7517_X_map.mod
! Writing 38 model components to file: /g0/scr/pima/npcsc_uvs/J2349+7517_X_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2349+7517_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_X_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2349+7517_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2349+7517_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -7.0956e-06 Jy
! Component: 100  -  total flux cleaned = 0.000145466 Jy
! Component: 150  -  total flux cleaned = 0.000385487 Jy
! Component: 200  -  total flux cleaned = 0.000535668 Jy
! Component: 250  -  total flux cleaned = 0.000588504 Jy
! Component: 300  -  total flux cleaned = 0.000639173 Jy
! Component: 350  -  total flux cleaned = 0.000704095 Jy
! Component: 400  -  total flux cleaned = 0.000797306 Jy
! Component: 450  -  total flux cleaned = 0.000902133 Jy
! Component: 500  -  total flux cleaned = 0.00100361 Jy
! Component: 550  -  total flux cleaned = 0.00117232 Jy
! Component: 600  -  total flux cleaned = 0.00128154 Jy
! Component: 650  -  total flux cleaned = 0.00141454 Jy
! Component: 700  -  total flux cleaned = 0.00155718 Jy
! Component: 750  -  total flux cleaned = 0.00169646 Jy
! Component: 800  -  total flux cleaned = 0.00182025 Jy
! Component: 850  -  total flux cleaned = 0.00189315 Jy
! Component: 900  -  total flux cleaned = 0.00195274 Jy
! Component: 950  -  total flux cleaned = 0.00201112 Jy
! Component: 1000  -  total flux cleaned = 0.00205679 Jy
! Component: 1050  -  total flux cleaned = 0.00206764 Jy
! Component: 1100  -  total flux cleaned = 0.00208971 Jy
! Component: 1150  -  total flux cleaned = 0.00210055 Jy
! Component: 1200  -  total flux cleaned = 0.00213279 Jy
! Component: 1250  -  total flux cleaned = 0.00215409 Jy
! Component: 1300  -  total flux cleaned = 0.0021646 Jy
! Component: 1350  -  total flux cleaned = 0.0021749 Jy
! Component: 1400  -  total flux cleaned = 0.00220539 Jy
! Component: 1450  -  total flux cleaned = 0.00221533 Jy
! Component: 1500  -  total flux cleaned = 0.0022253 Jy
! Component: 1550  -  total flux cleaned = 0.00225449 Jy
! Component: 1600  -  total flux cleaned = 0.002264 Jy
! Component: 1650  -  total flux cleaned = 0.00229251 Jy
! Component: 1700  -  total flux cleaned = 0.0023395 Jy
! Component: 1750  -  total flux cleaned = 0.00235804 Jy
! Component: 1800  -  total flux cleaned = 0.00237644 Jy
! Component: 1850  -  total flux cleaned = 0.00243096 Jy
! Component: 1900  -  total flux cleaned = 0.00245781 Jy
! Component: 1950  -  total flux cleaned = 0.00249345 Jy
! Component: 2000  -  total flux cleaned = 0.00254621 Jy
! Component: 2050  -  total flux cleaned = 0.00257228 Jy
! Component: 2100  -  total flux cleaned = 0.00262395 Jy
! Component: 2150  -  total flux cleaned = 0.00262392 Jy
! Component: 2200  -  total flux cleaned = 0.00264929 Jy
! Component: 2250  -  total flux cleaned = 0.00267441 Jy
! Component: 2300  -  total flux cleaned = 0.00269108 Jy
! Component: 2350  -  total flux cleaned = 0.00274049 Jy
! Component: 2400  -  total flux cleaned = 0.00271604 Jy
! Component: 2450  -  total flux cleaned = 0.00277268 Jy
! Component: 2500  -  total flux cleaned = 0.00279674 Jy
! Component: 2550  -  total flux cleaned = 0.00279668 Jy
! Component: 2600  -  total flux cleaned = 0.00282827 Jy
! Component: 2650  -  total flux cleaned = 0.00282046 Jy
! Component: 2700  -  total flux cleaned = 0.00284384 Jy
! Component: 2750  -  total flux cleaned = 0.00283609 Jy
! Component: 2800  -  total flux cleaned = 0.00284379 Jy
! Component: 2850  -  total flux cleaned = 0.00287423 Jy
! Component: 2900  -  total flux cleaned = 0.00288172 Jy
! Component: 2950  -  total flux cleaned = 0.00289671 Jy
! Component: 3000  -  total flux cleaned = 0.00290421 Jy
! Component: 3050  -  total flux cleaned = 0.00291159 Jy
! Component: 3100  -  total flux cleaned = 0.00292633 Jy
! Component: 3150  -  total flux cleaned = 0.00292629 Jy
! Component: 3200  -  total flux cleaned = 0.00292628 Jy
! Component: 3250  -  total flux cleaned = 0.0029335 Jy
! Component: 3300  -  total flux cleaned = 0.00293352 Jy
! Component: 3350  -  total flux cleaned = 0.0029407 Jy
! Component: 3400  -  total flux cleaned = 0.00294779 Jy
! Component: 3450  -  total flux cleaned = 0.00296905 Jy
! Component: 3500  -  total flux cleaned = 0.00298311 Jy
! Component: 3550  -  total flux cleaned = 0.00299005 Jy
! Component: 3600  -  total flux cleaned = 0.00298309 Jy
! Component: 3650  -  total flux cleaned = 0.00297612 Jy
! Component: 3700  -  total flux cleaned = 0.00300379 Jy
! Component: 3750  -  total flux cleaned = 0.0029969 Jy
! Component: 3800  -  total flux cleaned = 0.00300376 Jy
! Component: 3850  -  total flux cleaned = 0.00300376 Jy
! Component: 3900  -  total flux cleaned = 0.00298337 Jy
! Component: 3950  -  total flux cleaned = 0.00298339 Jy
! Component: 4000  -  total flux cleaned = 0.00297664 Jy
! Component: 4050  -  total flux cleaned = 0.00296992 Jy
! Total flux subtracted in 4096 components = 0.00295652 Jy
! Clean residual min=-0.000389 max=0.000492 Jy/beam
! Clean residual mean=-0.000001 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.0257139 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 317 components and 0.0257139 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2349+7517_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9226 x 2.885 at 2.083 degrees (North through East)
! Clean map  min=-0.0016001  max=0.025278 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0252785 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112053 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.32982 1.32982 2.65964 5.31928 10.6386 21.2771 42.5542 85.1085
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.025 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2349+7517_X_uvs.log closed on Sun Oct  6 14:28:01 2013