! Started logfile: /g0/scr/pima/npcsc_uvs/J2349+7517_S_uvs.log on Sun Oct 6 14:32:15 2013 obs /g0/scr/pima/npcsc_uvs/J2349+7517_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.333333 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2349+7517 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 2700 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2349+7517_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 135 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.002956Jy sigma=0.754132 ! Fit after self-cal, rms=0.947113Jy sigma=0.676182 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.699 mas, bmaj=11.93 mas, bpa=11.22 degrees ! Estimated noise=39.3588 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.060053 Jy ! Component: 100 - total flux cleaned = 0.073853 Jy ! Total flux subtracted in 100 components = 0.073853 Jy ! Clean residual min=-0.009807 max=0.009678 Jy/beam ! Clean residual mean=-0.000005 rms=0.002728 Jy/beam ! Combined flux in latest and established models = 0.073853 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.073853 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068944Jy sigma=0.055219 ! Fit after self-cal, rms=0.066776Jy sigma=0.054180 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.036 mas, bmaj=13.3 mas, bpa=13.79 degrees ! Estimated noise=22.9116 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00786171 Jy ! Component: 100 - total flux cleaned = 0.0118341 Jy ! Component: 150 - total flux cleaned = 0.0140627 Jy ! Component: 200 - total flux cleaned = 0.0153845 Jy ! Total flux subtracted in 200 components = 0.0153845 Jy ! Clean residual min=-0.008438 max=0.007544 Jy/beam ! Clean residual mean=-0.000027 rms=0.002420 Jy/beam ! Combined flux in latest and established models = 0.0892375 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 30 components and 0.0892375 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068803Jy sigma=0.051776 ! Fit after self-cal, rms=0.068610Jy sigma=0.051707 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 1.00* HN 1.00* KP 0.87 ! LA 1.00 MK 0.87 NL 0.92 OV 0.93 ! PT 1.09 SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.00* HN 1.00* KP 0.94 ! LA 0.80 MK 0.85 NL 0.88 OV 0.89 ! PT 1.10 SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.30 FD 1.00* HN 1.00* KP 1.03 ! LA 0.65 MK 0.83 NL 1.01 OV 0.91 ! PT 1.04 SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 1.00* HN 1.00* KP 0.83 ! LA 0.54 MK 0.93 NL 1.13 OV 0.66 ! PT 1.00 SC 1.00* ! ! ! Fit before self-cal, rms=0.068610Jy sigma=0.051707 ! Fit after self-cal, rms=0.061301Jy sigma=0.045675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=5.093 mas, bmaj=13.34 mas, bpa=13.98 degrees ! Estimated noise=18.4179 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0119647 Jy ! Component: 100 - total flux cleaned = -0.0150073 Jy ! Component: 150 - total flux cleaned = -0.0165459 Jy ! Component: 200 - total flux cleaned = -0.0170797 Jy ! Total flux subtracted in 200 components = -0.0170797 Jy ! Clean residual min=-0.002421 max=0.002725 Jy/beam ! Clean residual mean=-0.000007 rms=0.000674 Jy/beam ! Combined flux in latest and established models = 0.0721578 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 41 components and 0.0721578 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054505Jy sigma=0.047868 ! Fit after self-cal, rms=0.054804Jy sigma=0.047689 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.054804Jy sigma=0.047689 ! Fit after self-cal, rms=0.050424Jy sigma=0.045377 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.133 mas, bmaj=13.35 mas, bpa=14.06 degrees ! Estimated noise=15.035 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.009727 Jy ! Component: 100 - total flux cleaned = -0.0120853 Jy ! Component: 150 - total flux cleaned = -0.0132512 Jy ! Component: 200 - total flux cleaned = -0.0136117 Jy ! Total flux subtracted in 200 components = -0.0136117 Jy ! Clean residual min=-0.001785 max=0.002075 Jy/beam ! Clean residual mean=-0.000006 rms=0.000535 Jy/beam ! Combined flux in latest and established models = 0.0585461 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 49 components and 0.0585461 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044959Jy sigma=0.047578 ! Fit after self-cal, rms=0.045010Jy sigma=0.047561 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000323742 Jy ! Component: 100 - total flux cleaned = -0.000424457 Jy ! Component: 150 - total flux cleaned = -0.000440205 Jy ! Component: 200 - total flux cleaned = -0.00046869 Jy ! Total flux subtracted in 200 components = -0.00046869 Jy ! Clean residual min=-0.001683 max=0.002054 Jy/beam ! Clean residual mean=-0.000006 rms=0.000537 Jy/beam ! Combined flux in latest and established models = 0.0580774 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.0580774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044910Jy sigma=0.047655 ! Fit after self-cal, rms=0.044914Jy sigma=0.047649 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.044914Jy sigma=0.047649 ! Fit after self-cal, rms=0.041188Jy sigma=0.045281 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=5.183 mas, bmaj=13.37 mas, bpa=14.2 degrees ! Estimated noise=12.3362 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00753577 Jy ! Component: 100 - total flux cleaned = -0.00931492 Jy ! Component: 150 - total flux cleaned = -0.0101438 Jy ! Component: 200 - total flux cleaned = -0.0106205 Jy ! Total flux subtracted in 200 components = -0.0106205 Jy ! Clean residual min=-0.001327 max=0.001472 Jy/beam ! Clean residual mean=-0.000004 rms=0.000402 Jy/beam ! Combined flux in latest and established models = 0.0474569 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 77 components and 0.0474569 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037006Jy sigma=0.047525 ! Fit after self-cal, rms=0.037030Jy sigma=0.047515 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000327903 Jy ! Component: 100 - total flux cleaned = -0.000373536 Jy ! Component: 150 - total flux cleaned = -0.00039789 Jy ! Component: 200 - total flux cleaned = -0.000405113 Jy ! Total flux subtracted in 200 components = -0.000405113 Jy ! Clean residual min=-0.001286 max=0.001489 Jy/beam ! Clean residual mean=-0.000004 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.0470518 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 88 components and 0.0470518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036972Jy sigma=0.047593 ! Fit after self-cal, rms=0.036977Jy sigma=0.047589 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.036977Jy sigma=0.047589 ! Fit after self-cal, rms=0.033798Jy sigma=0.045211 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=15.09 mas, bpa=25.95 degrees ! Estimated noise=10.8722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0063335 Jy ! Component: 100 - total flux cleaned = -0.0078219 Jy ! Component: 150 - total flux cleaned = -0.00840987 Jy ! Component: 200 - total flux cleaned = -0.00869795 Jy ! Total flux subtracted in 200 components = -0.00869795 Jy ! Clean residual min=-0.001040 max=0.001199 Jy/beam ! Clean residual mean=-0.000004 rms=0.000356 Jy/beam ! Combined flux in latest and established models = 0.0383538 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 110 components and 0.0383538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030341Jy sigma=0.047520 ! Fit after self-cal, rms=0.030356Jy sigma=0.047507 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00023361 Jy ! Component: 100 - total flux cleaned = -0.000253692 Jy ! Component: 150 - total flux cleaned = -0.000268439 Jy ! Component: 200 - total flux cleaned = -0.000271467 Jy ! Total flux subtracted in 200 components = -0.000271467 Jy ! Clean residual min=-0.001061 max=0.001189 Jy/beam ! Clean residual mean=-0.000004 rms=0.000364 Jy/beam ! Combined flux in latest and established models = 0.0380824 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 123 components and 0.0380824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030329Jy sigma=0.047559 ! Fit after self-cal, rms=0.030302Jy sigma=0.047548 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=5.237 mas, bmaj=13.39 mas, bpa=14.35 degrees ! Estimated noise=10.1026 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.237 x 13.39 at 14.35 degrees (North through East) ! Clean map min=-0.0010411 max=0.035168 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.823 mas, bmaj=11.94 mas, bpa=11.75 degrees ! Estimated noise=17.5579 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0274444 Jy ! Component: 100 - total flux cleaned = 0.0337995 Jy ! Component: 150 - total flux cleaned = 0.0350509 Jy ! Component: 200 - total flux cleaned = 0.0361741 Jy ! Total flux subtracted in 200 components = 0.0361741 Jy ! Clean residual min=-0.002895 max=0.002765 Jy/beam ! Clean residual mean=-0.000000 rms=0.000826 Jy/beam ! Combined flux in latest and established models = 0.0361741 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.0361741 Jy ! Inverting map and beam ! Estimated beam: bmin=5.237 mas, bmaj=13.39 mas, bpa=14.35 degrees ! Estimated noise=10.1026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00163456 Jy ! Component: 100 - total flux cleaned = 0.00160301 Jy ! Component: 150 - total flux cleaned = 0.00162708 Jy ! Component: 200 - total flux cleaned = 0.00164718 Jy ! Total flux subtracted in 200 components = 0.00164718 Jy ! Clean residual min=-0.001347 max=0.001575 Jy/beam ! Clean residual mean=-0.000002 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.0378213 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 33 components and 0.0378213 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=9.053 mas, bmaj=15.09 mas, bpa=25.95 degrees ! Estimated noise=10.8722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.09917e-05 Jy ! Component: 100 - total flux cleaned = 7.64579e-05 Jy ! Component: 150 - total flux cleaned = 7.64689e-05 Jy ! Component: 200 - total flux cleaned = 7.66115e-05 Jy ! Total flux subtracted in 200 components = 7.66115e-05 Jy ! Clean residual min=-0.001158 max=0.001340 Jy/beam ! Clean residual mean=-0.000004 rms=0.000413 Jy/beam ! Combined flux in latest and established models = 0.0378979 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.11436e-07 Jy ! Component: 100 - total flux cleaned = 1.92896e-05 Jy ! Component: 150 - total flux cleaned = 4.43639e-05 Jy ! Component: 200 - total flux cleaned = 5.94427e-05 Jy ! Total flux subtracted in 200 components = 5.94427e-05 Jy ! Clean residual min=-0.001089 max=0.001300 Jy/beam ! Clean residual mean=-0.000004 rms=0.000399 Jy/beam ! Combined flux in latest and established models = 0.0379573 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 49 components and 0.0379573 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=5.237 mas, bmaj=13.39 mas, bpa=14.35 degrees ! Estimated noise=10.1026 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.5854e-05 Jy ! Component: 100 - total flux cleaned = 3.77732e-05 Jy ! Component: 150 - total flux cleaned = 0.000102556 Jy ! Component: 200 - total flux cleaned = 0.000113563 Jy ! Total flux subtracted in 200 components = 0.000113563 Jy ! Clean residual min=-0.001159 max=0.001314 Jy/beam ! Clean residual mean=-0.000002 rms=0.000367 Jy/beam ! Combined flux in latest and established models = 0.0380709 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 56 components and 0.0380709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.030273Jy sigma=0.047616 ! Fit after self-cal, rms=0.030271Jy sigma=0.047602 wmodel /g0/scr/pima/npcsc_uvs/J2349+7517_S_map.mod ! Writing 56 model components to file: /g0/scr/pima/npcsc_uvs/J2349+7517_S_map.mod wobs /g0/scr/pima/npcsc_uvs/J2349+7517_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_S_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J2349+7517_S_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2349+7517_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000475495 Jy ! Component: 100 - total flux cleaned = 0.000567691 Jy ! Component: 150 - total flux cleaned = 0.000471576 Jy ! Component: 200 - total flux cleaned = 0.000379886 Jy ! Component: 250 - total flux cleaned = 0.000365388 Jy ! Component: 300 - total flux cleaned = 0.000365134 Jy ! Component: 350 - total flux cleaned = 0.000300321 Jy ! Component: 400 - total flux cleaned = 0.000200893 Jy ! Component: 450 - total flux cleaned = 0.000105596 Jy ! Component: 500 - total flux cleaned = 7.0797e-05 Jy ! Component: 550 - total flux cleaned = 3.74284e-05 Jy ! Component: 600 - total flux cleaned = 4.99905e-06 Jy ! Component: 650 - total flux cleaned = -2.67481e-05 Jy ! Component: 700 - total flux cleaned = -7.83507e-05 Jy ! Component: 750 - total flux cleaned = -0.000118773 Jy ! Component: 800 - total flux cleaned = -0.000178051 Jy ! Component: 850 - total flux cleaned = -0.000226396 Jy ! Component: 900 - total flux cleaned = -0.000283299 Jy ! Component: 950 - total flux cleaned = -0.000357785 Jy ! Component: 1000 - total flux cleaned = -0.000422165 Jy ! Component: 1050 - total flux cleaned = -0.000513071 Jy ! Component: 1100 - total flux cleaned = -0.000576113 Jy ! Component: 1150 - total flux cleaned = -0.000665261 Jy ! Component: 1200 - total flux cleaned = -0.000727079 Jy ! Component: 1250 - total flux cleaned = -0.000779673 Jy ! Component: 1300 - total flux cleaned = -0.000831887 Jy ! Component: 1350 - total flux cleaned = -0.000883896 Jy ! Component: 1400 - total flux cleaned = -0.000944419 Jy ! Component: 1450 - total flux cleaned = -0.00100472 Jy ! Component: 1500 - total flux cleaned = -0.0010734 Jy ! Component: 1550 - total flux cleaned = -0.0011249 Jy ! Component: 1600 - total flux cleaned = -0.00118513 Jy ! Component: 1650 - total flux cleaned = -0.00124553 Jy ! Component: 1700 - total flux cleaned = -0.00132345 Jy ! Component: 1750 - total flux cleaned = -0.00139306 Jy ! Component: 1800 - total flux cleaned = -0.0014631 Jy ! Component: 1850 - total flux cleaned = -0.00151599 Jy ! Component: 1900 - total flux cleaned = -0.0015693 Jy ! Component: 1950 - total flux cleaned = -0.00160517 Jy ! Component: 2000 - total flux cleaned = -0.00163236 Jy ! Component: 2050 - total flux cleaned = -0.00167791 Jy ! Component: 2100 - total flux cleaned = -0.0017332 Jy ! Component: 2150 - total flux cleaned = -0.0017704 Jy ! Component: 2200 - total flux cleaned = -0.00181731 Jy ! Component: 2250 - total flux cleaned = -0.00187419 Jy ! Component: 2300 - total flux cleaned = -0.00191258 Jy ! Component: 2350 - total flux cleaned = -0.00196109 Jy ! Component: 2400 - total flux cleaned = -0.00201016 Jy ! Component: 2450 - total flux cleaned = -0.00205978 Jy ! Component: 2500 - total flux cleaned = -0.00211994 Jy ! Component: 2550 - total flux cleaned = -0.00218089 Jy ! Component: 2600 - total flux cleaned = -0.00222193 Jy ! Component: 2650 - total flux cleaned = -0.0022739 Jy ! Component: 2700 - total flux cleaned = -0.00233692 Jy ! Component: 2750 - total flux cleaned = -0.00239017 Jy ! Component: 2800 - total flux cleaned = -0.00245494 Jy ! Component: 2850 - total flux cleaned = -0.00250963 Jy ! Component: 2900 - total flux cleaned = -0.00256504 Jy ! Component: 2950 - total flux cleaned = -0.00262104 Jy ! Component: 3000 - total flux cleaned = -0.00267767 Jy ! Component: 3050 - total flux cleaned = -0.00274661 Jy ! Component: 3100 - total flux cleaned = -0.00281661 Jy ! Component: 3150 - total flux cleaned = -0.00288745 Jy ! Component: 3200 - total flux cleaned = -0.00295941 Jy ! Component: 3250 - total flux cleaned = -0.00300794 Jy ! Component: 3300 - total flux cleaned = -0.00306954 Jy ! Component: 3350 - total flux cleaned = -0.00313185 Jy ! Component: 3400 - total flux cleaned = -0.00320766 Jy ! Component: 3450 - total flux cleaned = -0.0032716 Jy ! Component: 3500 - total flux cleaned = -0.00338848 Jy ! Component: 3550 - total flux cleaned = -0.0034809 Jy ! Component: 3600 - total flux cleaned = -0.00356124 Jy ! Component: 3650 - total flux cleaned = -0.00367002 Jy ! Component: 3700 - total flux cleaned = -0.00375287 Jy ! Component: 3750 - total flux cleaned = -0.0038647 Jy ! Component: 3800 - total flux cleaned = -0.00396409 Jy ! Component: 3850 - total flux cleaned = -0.00406515 Jy ! Component: 3900 - total flux cleaned = -0.00415288 Jy ! Component: 3950 - total flux cleaned = -0.0042272 Jy ! Component: 4000 - total flux cleaned = -0.00428723 Jy ! Component: 4050 - total flux cleaned = -0.00439452 Jy ! Total flux subtracted in 4096 components = -0.00445677 Jy ! Clean residual min=-0.000981 max=0.000994 Jy/beam ! Clean residual mean=-0.000010 rms=0.000297 Jy/beam ! Combined flux in latest and established models = 0.0336141 Jy keep ! Adding 199 model components to the UV plane model. ! The established model now contains 255 components and 0.0336141 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J2349+7517_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 5.237 x 13.39 at 14.35 degrees (North through East) ! Clean map min=-0.0019659 max=0.035252 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2349+7517_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0352518 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000336373 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -2.8626 2.8626 5.72519 11.4504 22.9008 45.8015 91.6031 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.035 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J2349+7517_S_uvs.log closed on Sun Oct 6 14:32:19 2013