! Started logfile: /g0/scr/pima/npcsc_uvs/J2242+8224_X_uvs.log on Sun Oct  6 14:27:51 2013
obs /g0/scr/pima/npcsc_uvs/J2242+8224_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_X_uva.fits
! AN table 1: 45 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.5 visibilities/baseline/integration-bin.
! Found source: J2242+8224
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3240 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2242+8224_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 45 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.004036Jy  sigma=0.858051
! Fit after  self-cal, rms=0.941818Jy  sigma=0.761369
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.677 mas, bmaj=2.498 mas, bpa=-39.35 degrees
! Estimated noise=34.545 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0664506 Jy
! Component: 100  -  total flux cleaned = 0.0822749 Jy
! Total flux subtracted in 100 components = 0.0822749 Jy
! Clean residual min=-0.011733 max=0.012638 Jy/beam
! Clean residual mean=-0.000003 rms=0.003159 Jy/beam
! Combined flux in latest and established models = 0.0822749 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0822749 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079294Jy  sigma=0.072641
! Fit after  self-cal, rms=0.077407Jy  sigma=0.071550
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.317 mas, bmaj=2.877 mas, bpa=-30.5 degrees
! Estimated noise=16.9252 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00914304 Jy
! Component: 100  -  total flux cleaned = 0.0138292 Jy
! Component: 150  -  total flux cleaned = 0.0165441 Jy
! Component: 200  -  total flux cleaned = 0.0173986 Jy
! Total flux subtracted in 200 components = 0.0173986 Jy
! Clean residual min=-0.009313 max=0.013338 Jy/beam
! Clean residual mean=0.000003 rms=0.003328 Jy/beam
! Combined flux in latest and established models = 0.0996735 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 19 components and 0.0996735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079503Jy  sigma=0.068306
! Fit after  self-cal, rms=0.079461Jy  sigma=0.068258
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.00     HN        1.08     KP        0.99     
!   LA        0.71     NL        0.74     OV        0.80     PT        1.13     
!   SC        1.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.98     HN        0.83     KP        0.85     
!   LA        0.74     NL        0.89     OV        0.85     PT        1.04     
!   SC        1.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.90     HN        0.93     KP        0.75     
!   LA        0.70     NL        0.82     OV        0.87     PT        1.12     
!   SC        1.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        1.00     HN        0.85     KP        0.80     
!   LA        0.68     NL        0.80     OV        0.94     PT        1.10     
!   SC        1.00*    
! 
! 
! Fit before self-cal, rms=0.079461Jy  sigma=0.068258
! Fit after  self-cal, rms=0.071598Jy  sigma=0.063516
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.286 mas, bmaj=2.861 mas, bpa=-32.18 degrees
! Estimated noise=13.5111 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0135487 Jy
! Component: 100  -  total flux cleaned = -0.0160312 Jy
! Component: 150  -  total flux cleaned = -0.01628 Jy
! Component: 200  -  total flux cleaned = -0.0165822 Jy
! Total flux subtracted in 200 components = -0.0165822 Jy
! Clean residual min=-0.005218 max=0.008325 Jy/beam
! Clean residual mean=0.000001 rms=0.001994 Jy/beam
! Combined flux in latest and established models = 0.0830913 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.0830913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064213Jy  sigma=0.066089
! Fit after  self-cal, rms=0.064475Jy  sigma=0.065907
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.064475Jy  sigma=0.065907
! Fit after  self-cal, rms=0.058455Jy  sigma=0.063206
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.291 mas, bmaj=2.847 mas, bpa=-32.04 degrees
! Estimated noise=10.9596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0108899 Jy
! Component: 100  -  total flux cleaned = -0.0134846 Jy
! Component: 150  -  total flux cleaned = -0.0140742 Jy
! Component: 200  -  total flux cleaned = -0.0142698 Jy
! Total flux subtracted in 200 components = -0.0142698 Jy
! Clean residual min=-0.004350 max=0.006771 Jy/beam
! Clean residual mean=0.000001 rms=0.001630 Jy/beam
! Combined flux in latest and established models = 0.0688214 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 43 components and 0.0688214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052554Jy  sigma=0.065805
! Fit after  self-cal, rms=0.052593Jy  sigma=0.065783
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.5705e-05 Jy
! Component: 100  -  total flux cleaned = -6.72767e-05 Jy
! Component: 150  -  total flux cleaned = -4.27978e-05 Jy
! Component: 200  -  total flux cleaned = -6.44919e-05 Jy
! Total flux subtracted in 200 components = -6.44919e-05 Jy
! Clean residual min=-0.004333 max=0.006915 Jy/beam
! Clean residual mean=0.000000 rms=0.001632 Jy/beam
! Combined flux in latest and established models = 0.068757 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 47 components and 0.068757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052455Jy  sigma=0.065890
! Fit after  self-cal, rms=0.052455Jy  sigma=0.065880
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052455Jy  sigma=0.065880
! Fit after  self-cal, rms=0.047329Jy  sigma=0.063098
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.297 mas, bmaj=2.835 mas, bpa=-31.83 degrees
! Estimated noise=8.90274 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00843739 Jy
! Component: 100  -  total flux cleaned = -0.0105442 Jy
! Component: 150  -  total flux cleaned = -0.0114956 Jy
! Component: 200  -  total flux cleaned = -0.0118137 Jy
! Total flux subtracted in 200 components = -0.0118137 Jy
! Clean residual min=-0.003578 max=0.005425 Jy/beam
! Clean residual mean=0.000000 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.0569433 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 53 components and 0.0569433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042791Jy  sigma=0.065721
! Fit after  self-cal, rms=0.042798Jy  sigma=0.065703
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.89982e-05 Jy
! Component: 100  -  total flux cleaned = -9.17731e-05 Jy
! Component: 150  -  total flux cleaned = -0.000106539 Jy
! Component: 200  -  total flux cleaned = -0.000106267 Jy
! Total flux subtracted in 200 components = -0.000106267 Jy
! Clean residual min=-0.003530 max=0.005522 Jy/beam
! Clean residual mean=0.000000 rms=0.001310 Jy/beam
! Combined flux in latest and established models = 0.056837 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 56 components and 0.056837 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042719Jy  sigma=0.065792
! Fit after  self-cal, rms=0.042717Jy  sigma=0.065786
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.042717Jy  sigma=0.065786
! Fit after  self-cal, rms=0.038523Jy  sigma=0.063012
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=3.578 mas, bpa=24.49 degrees
! Estimated noise=7.4812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0069469 Jy
! Component: 100  -  total flux cleaned = -0.00865412 Jy
! Component: 150  -  total flux cleaned = -0.00919319 Jy
! Component: 200  -  total flux cleaned = -0.00931537 Jy
! Total flux subtracted in 200 components = -0.00931537 Jy
! Clean residual min=-0.003251 max=0.004922 Jy/beam
! Clean residual mean=0.000000 rms=0.001285 Jy/beam
! Combined flux in latest and established models = 0.0475216 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 75 components and 0.0475216 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034879Jy  sigma=0.065611
! Fit after  self-cal, rms=0.034867Jy  sigma=0.065585
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000265012 Jy
! Component: 100  -  total flux cleaned = -0.000275649 Jy
! Component: 150  -  total flux cleaned = -0.000275783 Jy
! Component: 200  -  total flux cleaned = -0.000259304 Jy
! Total flux subtracted in 200 components = -0.000259304 Jy
! Clean residual min=-0.003280 max=0.004928 Jy/beam
! Clean residual mean=0.000000 rms=0.001288 Jy/beam
! Combined flux in latest and established models = 0.0472623 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 78 components and 0.0472623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034799Jy  sigma=0.065699
! Fit after  self-cal, rms=0.034799Jy  sigma=0.065697
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.299 mas, bmaj=2.828 mas, bpa=-31.73 degrees
! Estimated noise=7.23755 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.299 x 2.828 at -31.73 degrees (North through East)
! Clean map  min=-0.0028835  max=0.034814 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.658 mas, bmaj=2.501 mas, bpa=-40.06 degrees
! Estimated noise=14.4592 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0287665 Jy
! Component: 100  -  total flux cleaned = 0.0365468 Jy
! Component: 150  -  total flux cleaned = 0.0392137 Jy
! Component: 200  -  total flux cleaned = 0.040427 Jy
! Total flux subtracted in 200 components = 0.040427 Jy
! Clean residual min=-0.003854 max=0.004640 Jy/beam
! Clean residual mean=0.000000 rms=0.001214 Jy/beam
! Combined flux in latest and established models = 0.040427 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 14 model components to the UV plane model.
! The established model now contains 14 components and 0.040427 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.299 mas, bmaj=2.828 mas, bpa=-31.73 degrees
! Estimated noise=7.23755 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00292262 Jy
! Component: 100  -  total flux cleaned = 0.00440849 Jy
! Component: 150  -  total flux cleaned = 0.00528056 Jy
! Component: 200  -  total flux cleaned = 0.00567213 Jy
! Total flux subtracted in 200 components = 0.00567213 Jy
! Clean residual min=-0.002784 max=0.004461 Jy/beam
! Clean residual mean=0.000000 rms=0.001087 Jy/beam
! Combined flux in latest and established models = 0.0460991 Jy
! Adding 15 model components to the UV plane model.
! The established model now contains 27 components and 0.0460991 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.939 mas, bmaj=3.578 mas, bpa=24.49 degrees
! Estimated noise=7.4812 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000536308 Jy
! Component: 100  -  total flux cleaned = 0.000584387 Jy
! Component: 150  -  total flux cleaned = 0.000614461 Jy
! Component: 200  -  total flux cleaned = 0.000655889 Jy
! Total flux subtracted in 200 components = 0.000655889 Jy
! Clean residual min=-0.003239 max=0.004900 Jy/beam
! Clean residual mean=0.000000 rms=0.001317 Jy/beam
! Combined flux in latest and established models = 0.046755 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.61344e-05 Jy
! Component: 100  -  total flux cleaned = 5.11514e-05 Jy
! Component: 150  -  total flux cleaned = 8.66288e-05 Jy
! Component: 200  -  total flux cleaned = 0.000119734 Jy
! Total flux subtracted in 200 components = 0.000119734 Jy
! Clean residual min=-0.003231 max=0.004900 Jy/beam
! Clean residual mean=0.000000 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.0468747 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 38 components and 0.0468747 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.299 mas, bmaj=2.828 mas, bpa=-31.73 degrees
! Estimated noise=7.23755 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.15709e-05 Jy
! Component: 100  -  total flux cleaned = -0.000169622 Jy
! Component: 150  -  total flux cleaned = -0.000192616 Jy
! Component: 200  -  total flux cleaned = -0.000192522 Jy
! Total flux subtracted in 200 components = -0.000192522 Jy
! Clean residual min=-0.002787 max=0.004400 Jy/beam
! Clean residual mean=0.000000 rms=0.001063 Jy/beam
! Combined flux in latest and established models = 0.0466822 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 48 components and 0.0466822 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034789Jy  sigma=0.065801
! Fit after  self-cal, rms=0.034795Jy  sigma=0.065784
wmodel /g0/scr/pima/npcsc_uvs/J2242+8224_X_map.mod
! Writing 48 model components to file: /g0/scr/pima/npcsc_uvs/J2242+8224_X_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2242+8224_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_X_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2242+8224_X_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2242+8224_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00187703 Jy
! Component: 100  -  total flux cleaned = 0.00330389 Jy
! Component: 150  -  total flux cleaned = 0.00446292 Jy
! Component: 200  -  total flux cleaned = 0.00533076 Jy
! Component: 250  -  total flux cleaned = 0.00574375 Jy
! Component: 300  -  total flux cleaned = 0.00583754 Jy
! Component: 350  -  total flux cleaned = 0.0059236 Jy
! Component: 400  -  total flux cleaned = 0.00589991 Jy
! Component: 450  -  total flux cleaned = 0.00582594 Jy
! Component: 500  -  total flux cleaned = 0.00575577 Jy
! Component: 550  -  total flux cleaned = 0.00564542 Jy
! Component: 600  -  total flux cleaned = 0.0056033 Jy
! Component: 650  -  total flux cleaned = 0.00558322 Jy
! Component: 700  -  total flux cleaned = 0.00558292 Jy
! Component: 750  -  total flux cleaned = 0.00550967 Jy
! Component: 800  -  total flux cleaned = 0.00549272 Jy
! Component: 850  -  total flux cleaned = 0.00549274 Jy
! Component: 900  -  total flux cleaned = 0.00547534 Jy
! Component: 950  -  total flux cleaned = 0.0054902 Jy
! Component: 1000  -  total flux cleaned = 0.00549017 Jy
! Component: 1050  -  total flux cleaned = 0.00554832 Jy
! Component: 1100  -  total flux cleaned = 0.00560421 Jy
! Component: 1150  -  total flux cleaned = 0.00569976 Jy
! Component: 1200  -  total flux cleaned = 0.0057929 Jy
! Component: 1250  -  total flux cleaned = 0.00588315 Jy
! Component: 1300  -  total flux cleaned = 0.00593306 Jy
! Component: 1350  -  total flux cleaned = 0.00603142 Jy
! Component: 1400  -  total flux cleaned = 0.00609181 Jy
! Component: 1450  -  total flux cleaned = 0.00617442 Jy
! Component: 1500  -  total flux cleaned = 0.00617463 Jy
! Component: 1550  -  total flux cleaned = 0.00625393 Jy
! Component: 1600  -  total flux cleaned = 0.00628758 Jy
! Component: 1650  -  total flux cleaned = 0.0064412 Jy
! Component: 1700  -  total flux cleaned = 0.00659254 Jy
! Component: 1750  -  total flux cleaned = 0.00670965 Jy
! Component: 1800  -  total flux cleaned = 0.00682548 Jy
! Component: 1850  -  total flux cleaned = 0.00695026 Jy
! Component: 1900  -  total flux cleaned = 0.00706316 Jy
! Component: 1950  -  total flux cleaned = 0.00717484 Jy
! Component: 2000  -  total flux cleaned = 0.00729525 Jy
! Component: 2050  -  total flux cleaned = 0.0073748 Jy
! Component: 2100  -  total flux cleaned = 0.00744369 Jy
! Component: 2150  -  total flux cleaned = 0.0075219 Jy
! Component: 2200  -  total flux cleaned = 0.00759945 Jy
! Component: 2250  -  total flux cleaned = 0.00763801 Jy
! Component: 2300  -  total flux cleaned = 0.00770501 Jy
! Component: 2350  -  total flux cleaned = 0.00774306 Jy
! Component: 2400  -  total flux cleaned = 0.00779042 Jy
! Component: 2450  -  total flux cleaned = 0.00782802 Jy
! Component: 2500  -  total flux cleaned = 0.00786551 Jy
! Component: 2550  -  total flux cleaned = 0.00790272 Jy
! Component: 2600  -  total flux cleaned = 0.00793985 Jy
! Component: 2650  -  total flux cleaned = 0.00794911 Jy
! Component: 2700  -  total flux cleaned = 0.00796757 Jy
! Component: 2750  -  total flux cleaned = 0.00797683 Jy
! Component: 2800  -  total flux cleaned = 0.00799519 Jy
! Component: 2850  -  total flux cleaned = 0.00800431 Jy
! Component: 2900  -  total flux cleaned = 0.0080226 Jy
! Component: 2950  -  total flux cleaned = 0.0080408 Jy
! Component: 3000  -  total flux cleaned = 0.00804991 Jy
! Component: 3050  -  total flux cleaned = 0.00805899 Jy
! Component: 3100  -  total flux cleaned = 0.0080952 Jy
! Component: 3150  -  total flux cleaned = 0.00809518 Jy
! Component: 3200  -  total flux cleaned = 0.00811325 Jy
! Component: 3250  -  total flux cleaned = 0.00814926 Jy
! Component: 3300  -  total flux cleaned = 0.00814922 Jy
! Component: 3350  -  total flux cleaned = 0.00816718 Jy
! Component: 3400  -  total flux cleaned = 0.00817611 Jy
! Component: 3450  -  total flux cleaned = 0.0081851 Jy
! Component: 3500  -  total flux cleaned = 0.00821199 Jy
! Component: 3550  -  total flux cleaned = 0.00822991 Jy
! Component: 3600  -  total flux cleaned = 0.00825684 Jy
! Component: 3650  -  total flux cleaned = 0.00829273 Jy
! Component: 3700  -  total flux cleaned = 0.00830176 Jy
! Component: 3750  -  total flux cleaned = 0.0083018 Jy
! Component: 3800  -  total flux cleaned = 0.00834684 Jy
! Component: 3850  -  total flux cleaned = 0.0083559 Jy
! Component: 3900  -  total flux cleaned = 0.00835589 Jy
! Component: 3950  -  total flux cleaned = 0.00838299 Jy
! Component: 4000  -  total flux cleaned = 0.00841013 Jy
! Component: 4050  -  total flux cleaned = 0.00842826 Jy
! Total flux subtracted in 4096 components = 0.00843731 Jy
! Clean residual min=-0.000539 max=0.000697 Jy/beam
! Clean residual mean=0.000001 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0551195 Jy
keep
! Adding 241 model components to the UV plane model.
! The established model now contains 289 components and 0.0551195 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2242+8224_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.299 x 2.828 at -31.73 degrees (North through East)
! Clean map  min=-0.001064  max=0.034265 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0342647 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000147367 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.29025 1.29025 2.5805 5.16099 10.322 20.644 41.2879 82.5759
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.034 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2242+8224_X_uvs.log closed on Sun Oct  6 14:27:55 2013