! Started logfile: /g0/scr/pima/npcsc_uvs/J2242+8224_S_uvs.log on Sun Oct 6 14:32:10 2013 obs /g0/scr/pima/npcsc_uvs/J2242+8224_S_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_S_uva.fits ! AN table 1: 45 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.866667 visibilities/baseline/integration-bin. ! Found source: J2242+8224 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23299e+09 8e+06 1 8e+06 ! 02 2 2.26299e+09 8e+06 1 8e+06 ! 03 3 2.35299e+09 8e+06 1 8e+06 ! 04 4 2.37299e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7020 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.5 print "taper_size =",taper_size ! taper_size = 20 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2242+8224_S] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.014630Jy sigma=1.396179 ! Fit after self-cal, rms=0.887860Jy sigma=1.042970 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.876 mas, bmaj=9.57 mas, bpa=-17.07 degrees ! Estimated noise=17.7934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.111177 Jy ! Component: 100 - total flux cleaned = 0.159325 Jy ! Total flux subtracted in 100 components = 0.159325 Jy ! Clean residual min=-0.019866 max=0.034746 Jy/beam ! Clean residual mean=0.000360 rms=0.008180 Jy/beam ! Combined flux in latest and established models = 0.159325 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 0.159325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.118602Jy sigma=0.214209 ! Fit after self-cal, rms=0.118560Jy sigma=0.214043 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=4.17 mas, bmaj=11.13 mas, bpa=-16.75 degrees ! Estimated noise=7.40295 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0575394 Jy ! Component: 100 - total flux cleaned = 0.0881618 Jy ! Component: 150 - total flux cleaned = 0.106607 Jy ! Component: 200 - total flux cleaned = 0.117894 Jy ! Total flux subtracted in 200 components = 0.117894 Jy ! Clean residual min=-0.019704 max=0.034451 Jy/beam ! Clean residual mean=0.000274 rms=0.007473 Jy/beam ! Combined flux in latest and established models = 0.277219 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 62 components and 0.277219 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111902Jy sigma=0.152076 ! Fit after self-cal, rms=0.111684Jy sigma=0.151804 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.88 FD 1.05 HN 0.74 KP 0.93 ! LA 0.99 MK 0.52 NL 1.11 OV 0.99 ! PT 0.96 SC 0.59 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.92 FD 1.10 HN 0.79 KP 0.92 ! LA 0.96 MK 0.56 NL 1.14 OV 1.03 ! PT 0.90 SC 0.62 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 1.16 HN 0.90 KP 0.93 ! LA 0.77 MK 0.65 NL 1.36 OV 1.05 ! PT 0.98 SC 0.69 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.90 FD 1.14 HN 0.80 KP 0.89 ! LA 0.64 MK 0.73 NL 1.28 OV 0.91 ! PT 0.86 SC 0.72 ! ! ! Fit before self-cal, rms=0.111684Jy sigma=0.151804 ! Fit after self-cal, rms=0.098349Jy sigma=0.129136 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.669 mas, bmaj=11.02 mas, bpa=-15.74 degrees ! Estimated noise=6.0132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-10, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00605735 Jy ! Component: 100 - total flux cleaned = 0.00673439 Jy ! Component: 150 - total flux cleaned = 0.00510685 Jy ! Component: 200 - total flux cleaned = 0.00379587 Jy ! Total flux subtracted in 200 components = 0.00379587 Jy ! Clean residual min=-0.007319 max=0.013480 Jy/beam ! Clean residual mean=0.000014 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 0.281015 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 100 components and 0.281015 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085557Jy sigma=0.121994 ! Fit after self-cal, rms=0.084796Jy sigma=0.120030 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084796Jy sigma=0.120030 ! Fit after self-cal, rms=0.079285Jy sigma=0.117444 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.48 mas, bmaj=10.87 mas, bpa=-15.8 degrees ! Estimated noise=5.29724 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00691309 Jy ! Component: 100 - total flux cleaned = -0.00596619 Jy ! Component: 150 - total flux cleaned = -0.00641202 Jy ! Component: 200 - total flux cleaned = -0.0071561 Jy ! Total flux subtracted in 200 components = -0.0071561 Jy ! Clean residual min=-0.004981 max=0.009205 Jy/beam ! Clean residual mean=0.000023 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.273859 Jy selfcal ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 130 components and 0.273859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072709Jy sigma=0.117392 ! Fit after self-cal, rms=0.072517Jy sigma=0.116830 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00831416 Jy ! Component: 100 - total flux cleaned = 0.0113005 Jy ! Component: 150 - total flux cleaned = 0.0126063 Jy ! Component: 200 - total flux cleaned = 0.0130849 Jy ! Total flux subtracted in 200 components = 0.0130849 Jy ! Clean residual min=-0.004126 max=0.005021 Jy/beam ! Clean residual mean=-0.000002 rms=0.001245 Jy/beam ! Combined flux in latest and established models = 0.286944 Jy ! Performing phase self-cal ! Adding 50 model components to the UV plane model. ! The established model now contains 175 components and 0.286944 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070456Jy sigma=0.114685 ! Fit after self-cal, rms=0.070345Jy sigma=0.114493 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070345Jy sigma=0.114493 ! Fit after self-cal, rms=0.066504Jy sigma=0.112767 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.321 mas, bmaj=10.79 mas, bpa=-15.85 degrees ! Estimated noise=4.74965 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00790999 Jy ! Component: 100 - total flux cleaned = -0.00726829 Jy ! Component: 150 - total flux cleaned = -0.00659478 Jy ! Component: 200 - total flux cleaned = -0.00611814 Jy ! Total flux subtracted in 200 components = -0.00611814 Jy ! Clean residual min=-0.003178 max=0.003579 Jy/beam ! Clean residual mean=0.000008 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.280826 Jy selfcal ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 207 components and 0.280826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062853Jy sigma=0.113862 ! Fit after self-cal, rms=0.062705Jy sigma=0.113743 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00052716 Jy ! Component: 100 - total flux cleaned = 0.00104869 Jy ! Component: 150 - total flux cleaned = 0.00132806 Jy ! Component: 200 - total flux cleaned = 0.00159124 Jy ! Total flux subtracted in 200 components = 0.00159124 Jy ! Clean residual min=-0.003120 max=0.003272 Jy/beam ! Clean residual mean=0.000006 rms=0.000851 Jy/beam ! Combined flux in latest and established models = 0.282417 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 228 components and 0.282417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062054Jy sigma=0.113518 ! Fit after self-cal, rms=0.062020Jy sigma=0.113488 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.062020Jy sigma=0.113488 ! Fit after self-cal, rms=0.059178Jy sigma=0.111936 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=12.98 mas, bpa=-18.57 degrees ! Estimated noise=5.16773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00794069 Jy ! Component: 100 - total flux cleaned = -0.00829869 Jy ! Component: 150 - total flux cleaned = -0.00811028 Jy ! Component: 200 - total flux cleaned = -0.00803063 Jy ! Total flux subtracted in 200 components = -0.00803063 Jy ! Clean residual min=-0.003179 max=0.003341 Jy/beam ! Clean residual mean=0.000016 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.274387 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 262 components and 0.274387 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056578Jy sigma=0.113633 ! Fit after self-cal, rms=0.056586Jy sigma=0.113542 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.06636e-07 Jy ! Component: 100 - total flux cleaned = 0.000138489 Jy ! Component: 150 - total flux cleaned = 0.000262653 Jy ! Component: 200 - total flux cleaned = 0.000318903 Jy ! Total flux subtracted in 200 components = 0.000318903 Jy ! Clean residual min=-0.002951 max=0.003049 Jy/beam ! Clean residual mean=0.000016 rms=0.000886 Jy/beam ! Combined flux in latest and established models = 0.274706 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 292 components and 0.274705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056269Jy sigma=0.113580 ! Fit after self-cal, rms=0.056261Jy sigma=0.113552 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=10.74 mas, bpa=-15.92 degrees ! Estimated noise=4.29121 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 10.74 at -15.92 degrees (North through East) ! Clean map min=-0.0035054 max=0.089626 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.34 mas, bmaj=9.755 mas, bpa=-16.41 degrees ! Estimated noise=8.07735 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0555426 Jy ! Component: 100 - total flux cleaned = 0.0876405 Jy ! Component: 150 - total flux cleaned = 0.112046 Jy ! Component: 200 - total flux cleaned = 0.131674 Jy ! Total flux subtracted in 200 components = 0.131674 Jy ! Clean residual min=-0.008732 max=0.012041 Jy/beam ! Clean residual mean=0.000145 rms=0.003328 Jy/beam ! Combined flux in latest and established models = 0.131674 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 57 model components to the UV plane model. ! The established model now contains 57 components and 0.131674 Jy ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=10.74 mas, bpa=-15.92 degrees ! Estimated noise=4.29121 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036996 Jy ! Component: 100 - total flux cleaned = 0.0614142 Jy ! Component: 150 - total flux cleaned = 0.0789235 Jy ! Component: 200 - total flux cleaned = 0.0919035 Jy ! Total flux subtracted in 200 components = 0.0919035 Jy ! Clean residual min=-0.006148 max=0.008638 Jy/beam ! Clean residual mean=0.000114 rms=0.002521 Jy/beam ! Combined flux in latest and established models = 0.223578 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 139 components and 0.223578 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.072 mas, bmaj=12.98 mas, bpa=-18.57 degrees ! Estimated noise=5.16773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0169452 Jy ! Component: 100 - total flux cleaned = 0.0270981 Jy ! Component: 150 - total flux cleaned = 0.0337361 Jy ! Component: 200 - total flux cleaned = 0.038263 Jy ! Total flux subtracted in 200 components = 0.038263 Jy ! Clean residual min=-0.003989 max=0.004068 Jy/beam ! Clean residual mean=0.000063 rms=0.001324 Jy/beam ! Combined flux in latest and established models = 0.261841 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00315144 Jy ! Component: 100 - total flux cleaned = 0.00513265 Jy ! Component: 150 - total flux cleaned = 0.00615596 Jy ! Component: 200 - total flux cleaned = 0.00692021 Jy ! Total flux subtracted in 200 components = 0.00692021 Jy ! Clean residual min=-0.003132 max=0.003093 Jy/beam ! Clean residual mean=0.000036 rms=0.000931 Jy/beam ! Combined flux in latest and established models = 0.268761 Jy ! Adding 144 model components to the UV plane model. ! The established model now contains 259 components and 0.268761 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.198 mas, bmaj=10.74 mas, bpa=-15.92 degrees ! Estimated noise=4.29121 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000589305 Jy ! Component: 100 - total flux cleaned = 0.00129611 Jy ! Component: 150 - total flux cleaned = 0.00171038 Jy ! Component: 200 - total flux cleaned = 0.00197277 Jy ! Total flux subtracted in 200 components = 0.00197277 Jy ! Clean residual min=-0.002250 max=0.002656 Jy/beam ! Clean residual mean=0.000014 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.270734 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 288 components and 0.270734 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.055225Jy sigma=0.113564 ! Fit after self-cal, rms=0.055116Jy sigma=0.113196 wmodel /g0/scr/pima/npcsc_uvs/J2242+8224_S_map.mod ! Writing 288 model components to file: /g0/scr/pima/npcsc_uvs/J2242+8224_S_map.mod wobs /g0/scr/pima/npcsc_uvs/J2242+8224_S_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_S_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J2242+8224_S_map.win ! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J2242+8224_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000772936 Jy ! Component: 100 - total flux cleaned = 0.00073725 Jy ! Component: 150 - total flux cleaned = 0.00066847 Jy ! Component: 200 - total flux cleaned = 0.000761563 Jy ! Component: 250 - total flux cleaned = 0.000821084 Jy ! Component: 300 - total flux cleaned = 0.000907288 Jy ! Component: 350 - total flux cleaned = 0.000935733 Jy ! Component: 400 - total flux cleaned = 0.00104161 Jy ! Component: 450 - total flux cleaned = 0.000990528 Jy ! Component: 500 - total flux cleaned = 0.00106552 Jy ! Component: 550 - total flux cleaned = 0.00106606 Jy ! Component: 600 - total flux cleaned = 0.00109001 Jy ! Component: 650 - total flux cleaned = 0.00108999 Jy ! Component: 700 - total flux cleaned = 0.00104598 Jy ! Component: 750 - total flux cleaned = 0.00106761 Jy ! Component: 800 - total flux cleaned = 0.00112992 Jy ! Component: 850 - total flux cleaned = 0.00117053 Jy ! Component: 900 - total flux cleaned = 0.00117047 Jy ! Component: 950 - total flux cleaned = 0.0012285 Jy ! Component: 1000 - total flux cleaned = 0.00119048 Jy ! Component: 1050 - total flux cleaned = 0.00119051 Jy ! Component: 1100 - total flux cleaned = 0.00122649 Jy ! Component: 1150 - total flux cleaned = 0.00115451 Jy ! Component: 1200 - total flux cleaned = 0.00115448 Jy ! Component: 1250 - total flux cleaned = 0.00120664 Jy ! Component: 1300 - total flux cleaned = 0.00125736 Jy ! Component: 1350 - total flux cleaned = 0.00134085 Jy ! Component: 1400 - total flux cleaned = 0.00145574 Jy ! Component: 1450 - total flux cleaned = 0.00153633 Jy ! Component: 1500 - total flux cleaned = 0.00167974 Jy ! Component: 1550 - total flux cleaned = 0.00175813 Jy ! Component: 1600 - total flux cleaned = 0.00185093 Jy ! Component: 1650 - total flux cleaned = 0.00188127 Jy ! Component: 1700 - total flux cleaned = 0.00195666 Jy ! Component: 1750 - total flux cleaned = 0.0019571 Jy ! Component: 1800 - total flux cleaned = 0.00204526 Jy ! Component: 1850 - total flux cleaned = 0.00200186 Jy ! Component: 1900 - total flux cleaned = 0.00210219 Jy ! Component: 1950 - total flux cleaned = 0.00207387 Jy ! Component: 2000 - total flux cleaned = 0.00212999 Jy ! Component: 2050 - total flux cleaned = 0.00215752 Jy ! Component: 2100 - total flux cleaned = 0.0021988 Jy ! Component: 2150 - total flux cleaned = 0.00222579 Jy ! Component: 2200 - total flux cleaned = 0.0022392 Jy ! Component: 2250 - total flux cleaned = 0.00227883 Jy ! Component: 2300 - total flux cleaned = 0.00231802 Jy ! Component: 2350 - total flux cleaned = 0.0023439 Jy ! Component: 2400 - total flux cleaned = 0.00234369 Jy ! Component: 2450 - total flux cleaned = 0.00239463 Jy ! Component: 2500 - total flux cleaned = 0.00241977 Jy ! Component: 2550 - total flux cleaned = 0.00243223 Jy ! Component: 2600 - total flux cleaned = 0.00246957 Jy ! Component: 2650 - total flux cleaned = 0.002482 Jy ! Component: 2700 - total flux cleaned = 0.00253071 Jy ! Component: 2750 - total flux cleaned = 0.0025789 Jy ! Component: 2800 - total flux cleaned = 0.00257899 Jy ! Component: 2850 - total flux cleaned = 0.00261473 Jy ! Component: 2900 - total flux cleaned = 0.00264991 Jy ! Component: 2950 - total flux cleaned = 0.0026615 Jy ! Component: 3000 - total flux cleaned = 0.00273092 Jy ! Component: 3050 - total flux cleaned = 0.00273088 Jy ! Component: 3100 - total flux cleaned = 0.00276494 Jy ! Component: 3150 - total flux cleaned = 0.00277623 Jy ! Component: 3200 - total flux cleaned = 0.00282119 Jy ! Component: 3250 - total flux cleaned = 0.00284332 Jy ! Component: 3300 - total flux cleaned = 0.00286539 Jy ! Component: 3350 - total flux cleaned = 0.00285438 Jy ! Component: 3400 - total flux cleaned = 0.00290889 Jy ! Component: 3450 - total flux cleaned = 0.00290883 Jy ! Component: 3500 - total flux cleaned = 0.00294102 Jy ! Component: 3550 - total flux cleaned = 0.00296239 Jy ! Component: 3600 - total flux cleaned = 0.00297284 Jy ! Component: 3650 - total flux cleaned = 0.00296223 Jy ! Component: 3700 - total flux cleaned = 0.00298321 Jy ! Component: 3750 - total flux cleaned = 0.00306633 Jy ! Component: 3800 - total flux cleaned = 0.00304572 Jy ! Component: 3850 - total flux cleaned = 0.00309709 Jy ! Component: 3900 - total flux cleaned = 0.00312776 Jy ! Component: 3950 - total flux cleaned = 0.00315817 Jy ! Component: 4000 - total flux cleaned = 0.0031783 Jy ! Component: 4050 - total flux cleaned = 0.00319831 Jy ! Total flux subtracted in 4096 components = 0.00318836 Jy ! Clean residual min=-0.000602 max=0.000546 Jy/beam ! Clean residual mean=0.000005 rms=0.000190 Jy/beam ! Combined flux in latest and established models = 0.273922 Jy keep ! Adding 301 model components to the UV plane model. ! The established model now contains 589 components and 0.273922 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J2242+8224_S\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.198 x 10.74 at -15.92 degrees (North through East) ! Clean map min=-0.0023756 max=0.081249 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2242+8224_S_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.081249 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000187478 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.692234 0.692234 1.38447 2.76893 5.53787 11.0757 22.1515 44.3029 88.6059 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0005 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.081 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J2242+8224_S_uvs.log closed on Sun Oct 6 14:32:14 2013