! Started logfile: /g0/scr/pima/npcsc_uvs/J2203+3145_S_uvs.log on Sun Oct  6 14:32:04 2013
obs /g0/scr/pima/npcsc_uvs/J2203+3145_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2203+3145_S_uva.fits
! AN table 1: 12 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.777778 visibilities/baseline/integration-bin.
! Found source: J2203+3145
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1680 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2203+3145_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 17 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.687004Jy  sigma=20.620017
! Fit after  self-cal, rms=0.504279Jy  sigma=6.597892
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.065 mas, bmaj=8.185 mas, bpa=23.76 degrees
! Estimated noise=2.49685 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.01579 Jy
! Component: 100  -  total flux cleaned = 1.33288 Jy
! Total flux subtracted in 100 components = 1.33288 Jy
! Clean residual min=-0.070261 max=0.137478 Jy/beam
! Clean residual mean=0.000043 rms=0.023876 Jy/beam
! Combined flux in latest and established models = 1.33288 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 1.33288 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.310337Jy  sigma=4.050320
! Fit after  self-cal, rms=0.307250Jy  sigma=4.038332
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.752 mas, bmaj=9.05 mas, bpa=21.71 degrees
! Estimated noise=1.65796 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.191089 Jy
! Component: 100  -  total flux cleaned = 0.283298 Jy
! Component: 150  -  total flux cleaned = 0.336454 Jy
! Component: 200  -  total flux cleaned = 0.369487 Jy
! Total flux subtracted in 200 components = 0.369487 Jy
! Clean residual min=-0.040284 max=0.044221 Jy/beam
! Clean residual mean=0.000068 rms=0.011626 Jy/beam
! Combined flux in latest and established models = 1.70237 Jy
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 53 components and 1.70237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.204969Jy  sigma=2.493139
! Fit after  self-cal, rms=0.202695Jy  sigma=2.484896
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.98     HN        1.01     KP        0.99     
!   LA        1.14     MK        0.96     NL        0.99     OV        0.96     
!   PT        1.08     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        1.01     KP        1.01     
!   LA        1.08     MK        1.00     NL        0.99     OV        0.97     
!   PT        1.00     SC        0.97     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.03     HN        1.01     KP        1.01     
!   LA        0.88     MK        1.09     NL        1.11     OV        1.00     
!   PT        1.08     SC        1.02     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        0.95     KP        0.94     
!   LA        0.74     MK        1.10     NL        1.03     OV        0.86     
!   PT        0.95     SC        1.09     
! 
! 
! Fit before self-cal, rms=0.202695Jy  sigma=2.484896
! Fit after  self-cal, rms=0.104614Jy  sigma=1.084736
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.793 mas, bmaj=9.162 mas, bpa=21.88 degrees
! Estimated noise=1.64751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-17.5, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0270915 Jy
! Component: 100  -  total flux cleaned = 0.0361039 Jy
! Component: 150  -  total flux cleaned = 0.0387365 Jy
! Component: 200  -  total flux cleaned = 0.0398577 Jy
! Total flux subtracted in 200 components = 0.0398577 Jy
! Clean residual min=-0.010602 max=0.014555 Jy/beam
! Clean residual mean=0.000026 rms=0.002996 Jy/beam
! Combined flux in latest and established models = 1.74222 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 83 components and 1.74222 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.096931Jy  sigma=0.991483
! Fit after  self-cal, rms=0.096645Jy  sigma=0.988446
! Inverting map 
! Added new window around map position (-7, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00838316 Jy
! Component: 100  -  total flux cleaned = 0.00934684 Jy
! Component: 150  -  total flux cleaned = 0.00963734 Jy
! Component: 200  -  total flux cleaned = 0.0104015 Jy
! Total flux subtracted in 200 components = 0.0104015 Jy
! Clean residual min=-0.009517 max=0.010343 Jy/beam
! Clean residual mean=0.000024 rms=0.002476 Jy/beam
! Combined flux in latest and established models = 1.75263 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 1.75263 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093949Jy  sigma=0.962175
! Fit after  self-cal, rms=0.093692Jy  sigma=0.960824
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093692Jy  sigma=0.960824
! Fit after  self-cal, rms=0.093104Jy  sigma=0.957081
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=9.16 mas, bpa=21.87 degrees
! Estimated noise=1.6426 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164354 Jy
! Component: 100  -  total flux cleaned = 0.0011959 Jy
! Component: 150  -  total flux cleaned = 0.0013952 Jy
! Component: 200  -  total flux cleaned = 0.00121659 Jy
! Total flux subtracted in 200 components = 0.00121659 Jy
! Clean residual min=-0.007687 max=0.008815 Jy/beam
! Clean residual mean=0.000018 rms=0.002156 Jy/beam
! Combined flux in latest and established models = 1.75384 Jy
selfcal
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 124 components and 1.75384 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091960Jy  sigma=0.947484
! Fit after  self-cal, rms=0.091760Jy  sigma=0.946613
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00140005 Jy
! Component: 100  -  total flux cleaned = 0.00108838 Jy
! Component: 150  -  total flux cleaned = 8.73088e-05 Jy
! Component: 200  -  total flux cleaned = -0.000441845 Jy
! Total flux subtracted in 200 components = -0.000441845 Jy
! Clean residual min=-0.007357 max=0.008132 Jy/beam
! Clean residual mean=0.000017 rms=0.002028 Jy/beam
! Combined flux in latest and established models = 1.7534 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 138 components and 1.7534 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091160Jy  sigma=0.942177
! Fit after  self-cal, rms=0.091015Jy  sigma=0.941585
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091015Jy  sigma=0.941585
! Fit after  self-cal, rms=0.090905Jy  sigma=0.940397
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.789 mas, bmaj=9.161 mas, bpa=21.89 degrees
! Estimated noise=1.64029 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000829564 Jy
! Component: 100  -  total flux cleaned = -0.00125121 Jy
! Component: 150  -  total flux cleaned = -0.00223661 Jy
! Component: 200  -  total flux cleaned = -0.00267214 Jy
! Total flux subtracted in 200 components = -0.00267214 Jy
! Clean residual min=-0.007303 max=0.007376 Jy/beam
! Clean residual mean=0.000015 rms=0.001892 Jy/beam
! Combined flux in latest and established models = 1.75073 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 147 components and 1.75073 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090431Jy  sigma=0.937249
! Fit after  self-cal, rms=0.090339Jy  sigma=0.936815
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00102708 Jy
! Component: 100  -  total flux cleaned = 0.00072406 Jy
! Component: 150  -  total flux cleaned = 0.000451062 Jy
! Component: 200  -  total flux cleaned = -5.68816e-05 Jy
! Total flux subtracted in 200 components = -5.68816e-05 Jy
! Clean residual min=-0.007021 max=0.007139 Jy/beam
! Clean residual mean=0.000014 rms=0.001829 Jy/beam
! Combined flux in latest and established models = 1.75067 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 161 components and 1.75067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090103Jy  sigma=0.934961
! Fit after  self-cal, rms=0.090037Jy  sigma=0.934685
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090037Jy  sigma=0.934685
! Fit after  self-cal, rms=0.090003Jy  sigma=0.933917
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.095 mas, bmaj=11.67 mas, bpa=17.85 degrees
! Estimated noise=1.71 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000480442 Jy
! Component: 100  -  total flux cleaned = -0.00030203 Jy
! Component: 150  -  total flux cleaned = -0.000629351 Jy
! Component: 200  -  total flux cleaned = -0.000971689 Jy
! Total flux subtracted in 200 components = -0.000971689 Jy
! Clean residual min=-0.008048 max=0.007798 Jy/beam
! Clean residual mean=0.000022 rms=0.002288 Jy/beam
! Combined flux in latest and established models = 1.7497 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 186 components and 1.7497 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089878Jy  sigma=0.933149
! Fit after  self-cal, rms=0.089813Jy  sigma=0.932957
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000505328 Jy
! Component: 100  -  total flux cleaned = 0.000358482 Jy
! Component: 150  -  total flux cleaned = 0.00017761 Jy
! Component: 200  -  total flux cleaned = -4.45904e-05 Jy
! Total flux subtracted in 200 components = -4.45904e-05 Jy
! Clean residual min=-0.007994 max=0.007728 Jy/beam
! Clean residual mean=0.000022 rms=0.002247 Jy/beam
! Combined flux in latest and established models = 1.74966 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 209 components and 1.74966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089756Jy  sigma=0.932130
! Fit after  self-cal, rms=0.089707Jy  sigma=0.932011
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.79 mas, bmaj=9.161 mas, bpa=21.92 degrees
! Estimated noise=1.63852 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.79 x 9.161 at 21.92 degrees (North through East)
! Clean map  min=-0.0065993  max=1.3226 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089707Jy  sigma=0.932011
! Fit after  self-cal, rms=0.084232Jy  sigma=0.819235
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=9.157 mas, bpa=21.9 degrees
! Estimated noise=1.6375 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00190943 Jy
! Component: 100  -  total flux cleaned = -0.00254329 Jy
! Component: 150  -  total flux cleaned = -0.00300871 Jy
! Component: 200  -  total flux cleaned = -0.00356597 Jy
! Total flux subtracted in 200 components = -0.00356597 Jy
! Clean residual min=-0.006506 max=0.006289 Jy/beam
! Clean residual mean=0.000015 rms=0.001612 Jy/beam
! Combined flux in latest and established models = 1.74609 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 224 components and 1.74609 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084038Jy  sigma=0.817609
! Fit after  self-cal, rms=0.084004Jy  sigma=0.817479
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000326618 Jy
! Component: 100  -  total flux cleaned = 7.53496e-05 Jy
! Component: 150  -  total flux cleaned = -0.000277054 Jy
! Component: 200  -  total flux cleaned = -0.000554851 Jy
! Total flux subtracted in 200 components = -0.000554851 Jy
! Clean residual min=-0.006487 max=0.006270 Jy/beam
! Clean residual mean=0.000015 rms=0.001585 Jy/beam
! Combined flux in latest and established models = 1.74553 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 241 components and 1.74553 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083905Jy  sigma=0.816610
! Fit after  self-cal, rms=0.083879Jy  sigma=0.816520
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083879Jy  sigma=0.816520
! Fit after  self-cal, rms=0.083894Jy  sigma=0.816198
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.084 mas, bmaj=8.239 mas, bpa=23.74 degrees
! Estimated noise=2.48469 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.00886 Jy
! Component: 100  -  total flux cleaned = 1.32623 Jy
! Component: 150  -  total flux cleaned = 1.47251 Jy
! Component: 200  -  total flux cleaned = 1.54639 Jy
! Total flux subtracted in 200 components = 1.54639 Jy
! Clean residual min=-0.028254 max=0.038118 Jy/beam
! Clean residual mean=0.000024 rms=0.008826 Jy/beam
! Combined flux in latest and established models = 1.54639 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 1.54639 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=9.158 mas, bpa=21.93 degrees
! Estimated noise=1.63646 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0636224 Jy
! Component: 100  -  total flux cleaned = 0.101201 Jy
! Component: 150  -  total flux cleaned = 0.125453 Jy
! Component: 200  -  total flux cleaned = 0.142347 Jy
! Total flux subtracted in 200 components = 0.142347 Jy
! Clean residual min=-0.009717 max=0.012222 Jy/beam
! Clean residual mean=0.000018 rms=0.003276 Jy/beam
! Combined flux in latest and established models = 1.68874 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 69 components and 1.68874 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.098 mas, bmaj=11.67 mas, bpa=17.84 degrees
! Estimated noise=1.70747 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0169579 Jy
! Component: 100  -  total flux cleaned = 0.0275847 Jy
! Component: 150  -  total flux cleaned = 0.0339728 Jy
! Component: 200  -  total flux cleaned = 0.0372939 Jy
! Total flux subtracted in 200 components = 0.0372939 Jy
! Clean residual min=-0.008941 max=0.009268 Jy/beam
! Clean residual mean=0.000022 rms=0.002667 Jy/beam
! Combined flux in latest and established models = 1.72603 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00271744 Jy
! Component: 100  -  total flux cleaned = 0.00480788 Jy
! Component: 150  -  total flux cleaned = 0.00669943 Jy
! Component: 200  -  total flux cleaned = 0.00797112 Jy
! Total flux subtracted in 200 components = 0.00797112 Jy
! Clean residual min=-0.007825 max=0.007511 Jy/beam
! Clean residual mean=0.000027 rms=0.002229 Jy/beam
! Combined flux in latest and established models = 1.734 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 148 components and 1.734 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.791 mas, bmaj=9.158 mas, bpa=21.93 degrees
! Estimated noise=1.63646 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000235019 Jy
! Component: 100  -  total flux cleaned = 0.00114052 Jy
! Component: 150  -  total flux cleaned = 0.00162542 Jy
! Component: 200  -  total flux cleaned = 0.00206025 Jy
! Total flux subtracted in 200 components = 0.00206025 Jy
! Clean residual min=-0.006328 max=0.006630 Jy/beam
! Clean residual mean=0.000019 rms=0.001708 Jy/beam
! Combined flux in latest and established models = 1.73606 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 173 components and 1.73606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084675Jy  sigma=0.821110
! Fit after  self-cal, rms=0.084390Jy  sigma=0.818892
wmodel /g0/scr/pima/npcsc_uvs/J2203+3145_S_map.mod
! Writing 173 model components to file: /g0/scr/pima/npcsc_uvs/J2203+3145_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2203+3145_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2203+3145_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2203+3145_S_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J2203+3145_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00210088 Jy
! Component: 100  -  total flux cleaned = 0.00373119 Jy
! Component: 150  -  total flux cleaned = 0.00514063 Jy
! Component: 200  -  total flux cleaned = 0.00646701 Jy
! Component: 250  -  total flux cleaned = 0.00736623 Jy
! Component: 300  -  total flux cleaned = 0.00788058 Jy
! Component: 350  -  total flux cleaned = 0.0080483 Jy
! Component: 400  -  total flux cleaned = 0.00804763 Jy
! Component: 450  -  total flux cleaned = 0.00789499 Jy
! Component: 500  -  total flux cleaned = 0.00759971 Jy
! Component: 550  -  total flux cleaned = 0.00760081 Jy
! Component: 600  -  total flux cleaned = 0.00739203 Jy
! Component: 650  -  total flux cleaned = 0.00732465 Jy
! Component: 700  -  total flux cleaned = 0.00712774 Jy
! Component: 750  -  total flux cleaned = 0.00712656 Jy
! Component: 800  -  total flux cleaned = 0.00694039 Jy
! Component: 850  -  total flux cleaned = 0.00688118 Jy
! Component: 900  -  total flux cleaned = 0.00676415 Jy
! Component: 950  -  total flux cleaned = 0.00670745 Jy
! Component: 1000  -  total flux cleaned = 0.00682149 Jy
! Component: 1050  -  total flux cleaned = 0.00709855 Jy
! Component: 1100  -  total flux cleaned = 0.00715335 Jy
! Component: 1150  -  total flux cleaned = 0.00726 Jy
! Component: 1200  -  total flux cleaned = 0.00726029 Jy
! Component: 1250  -  total flux cleaned = 0.00741581 Jy
! Component: 1300  -  total flux cleaned = 0.00741521 Jy
! Component: 1350  -  total flux cleaned = 0.00756499 Jy
! Component: 1400  -  total flux cleaned = 0.00746687 Jy
! Component: 1450  -  total flux cleaned = 0.00756532 Jy
! Component: 1500  -  total flux cleaned = 0.00789897 Jy
! Component: 1550  -  total flux cleaned = 0.00794556 Jy
! Component: 1600  -  total flux cleaned = 0.00817622 Jy
! Component: 1650  -  total flux cleaned = 0.00831229 Jy
! Component: 1700  -  total flux cleaned = 0.00831271 Jy
! Component: 1750  -  total flux cleaned = 0.00853367 Jy
! Component: 1800  -  total flux cleaned = 0.00853385 Jy
! Component: 1850  -  total flux cleaned = 0.00861984 Jy
! Component: 1900  -  total flux cleaned = 0.00866223 Jy
! Component: 1950  -  total flux cleaned = 0.00883073 Jy
! Component: 2000  -  total flux cleaned = 0.00907883 Jy
! Component: 2050  -  total flux cleaned = 0.00903841 Jy
! Component: 2100  -  total flux cleaned = 0.00920013 Jy
! Component: 2150  -  total flux cleaned = 0.00920003 Jy
! Component: 2200  -  total flux cleaned = 0.00919971 Jy
! Component: 2250  -  total flux cleaned = 0.0092387 Jy
! Component: 2300  -  total flux cleaned = 0.00923839 Jy
! Component: 2350  -  total flux cleaned = 0.00919974 Jy
! Component: 2400  -  total flux cleaned = 0.00920036 Jy
! Component: 2450  -  total flux cleaned = 0.00920004 Jy
! Component: 2500  -  total flux cleaned = 0.00920017 Jy
! Component: 2550  -  total flux cleaned = 0.00927307 Jy
! Component: 2600  -  total flux cleaned = 0.00938028 Jy
! Component: 2650  -  total flux cleaned = 0.00934431 Jy
! Component: 2700  -  total flux cleaned = 0.00937961 Jy
! Component: 2750  -  total flux cleaned = 0.00934478 Jy
! Component: 2800  -  total flux cleaned = 0.00941418 Jy
! Component: 2850  -  total flux cleaned = 0.00944825 Jy
! Component: 2900  -  total flux cleaned = 0.00954922 Jy
! Component: 2950  -  total flux cleaned = 0.00948227 Jy
! Component: 3000  -  total flux cleaned = 0.00951559 Jy
! Component: 3050  -  total flux cleaned = 0.00951564 Jy
! Component: 3100  -  total flux cleaned = 0.00961262 Jy
! Component: 3150  -  total flux cleaned = 0.00961277 Jy
! Component: 3200  -  total flux cleaned = 0.00970784 Jy
! Component: 3250  -  total flux cleaned = 0.00977098 Jy
! Component: 3300  -  total flux cleaned = 0.00977087 Jy
! Component: 3350  -  total flux cleaned = 0.00983265 Jy
! Component: 3400  -  total flux cleaned = 0.00986307 Jy
! Component: 3450  -  total flux cleaned = 0.00983285 Jy
! Component: 3500  -  total flux cleaned = 0.0098331 Jy
! Component: 3550  -  total flux cleaned = 0.00971431 Jy
! Component: 3600  -  total flux cleaned = 0.00965552 Jy
! Component: 3650  -  total flux cleaned = 0.00950883 Jy
! Component: 3700  -  total flux cleaned = 0.00945077 Jy
! Component: 3750  -  total flux cleaned = 0.00930593 Jy
! Component: 3800  -  total flux cleaned = 0.00922008 Jy
! Component: 3850  -  total flux cleaned = 0.00910626 Jy
! Component: 3900  -  total flux cleaned = 0.00902169 Jy
! Component: 3950  -  total flux cleaned = 0.00902157 Jy
! Component: 4000  -  total flux cleaned = 0.00888213 Jy
! Component: 4050  -  total flux cleaned = 0.00885438 Jy
! Total flux subtracted in 4096 components = 0.00888165 Jy
! Clean residual min=-0.001678 max=0.001603 Jy/beam
! Clean residual mean=0.000002 rms=0.000492 Jy/beam
! Combined flux in latest and established models = 1.74495 Jy
keep
! Adding 271 model components to the UV plane model.
! The established model now contains 444 components and 1.74495 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2203+3145_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.791 x 9.158 at 21.93 degrees (North through East)
! Clean map  min=-0.003753  max=1.3236 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2203+3145_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 1.32363 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000490311 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.111129 0.111129 0.222258 0.444516 0.889031 1.77806 3.55612 7.11225 14.2245 28.449 56.898
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0014 
print "peak=",int(1000*peak_flux)/1000
! peak= 1.323 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2203+3145_S_uvs.log closed on Sun Oct  6 14:32:08 2013