! Started logfile: /g0/scr/pima/npcsc_uvs/J2133+8239_S_uvs.log on Sun Oct  6 14:31:53 2013
obs /g0/scr/pima/npcsc_uvs/J2133+8239_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2133+8239_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J2133+8239
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8280 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2133+8239_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.035517Jy  sigma=1.748008
! Fit after  self-cal, rms=0.828637Jy  sigma=1.183229
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.538 mas, bmaj=10.07 mas, bpa=-8.445 degrees
! Estimated noise=13.9943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.163128 Jy
! Component: 100  -  total flux cleaned = 0.220664 Jy
! Total flux subtracted in 100 components = 0.220664 Jy
! Clean residual min=-0.016451 max=0.027348 Jy/beam
! Clean residual mean=0.000201 rms=0.005942 Jy/beam
! Combined flux in latest and established models = 0.220664 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.220664 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.113469Jy  sigma=0.233940
! Fit after  self-cal, rms=0.112861Jy  sigma=0.233436
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.52 mas, bmaj=11.19 mas, bpa=-9.626 degrees
! Estimated noise=5.44628 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0393304 Jy
! Component: 100  -  total flux cleaned = 0.0604908 Jy
! Component: 150  -  total flux cleaned = 0.0739499 Jy
! Component: 200  -  total flux cleaned = 0.082794 Jy
! Total flux subtracted in 200 components = 0.082794 Jy
! Clean residual min=-0.017054 max=0.031312 Jy/beam
! Clean residual mean=0.000260 rms=0.007679 Jy/beam
! Combined flux in latest and established models = 0.303458 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 58 components and 0.303458 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111190Jy  sigma=0.191471
! Fit after  self-cal, rms=0.111192Jy  sigma=0.191359
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.25     HN        0.89     KP        0.91     
!   LA        0.94     MK        0.74     NL        1.00     OV        1.22     
!   PT        0.91     SC        0.98     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.34     HN        0.94     KP        0.89     
!   LA        0.91     MK        0.76     NL        1.01     OV        1.21     
!   PT        0.84     SC        0.99     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.35     HN        0.95     KP        0.94     
!   LA        0.74     MK        0.90     NL        1.12     OV        1.22     
!   PT        0.90     SC        1.00     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.39     HN        0.94     KP        0.84     
!   LA        0.64     MK        0.99     NL        1.04     OV        1.05     
!   PT        0.82     SC        1.05     
! 
! 
! Fit before self-cal, rms=0.111192Jy  sigma=0.191359
! Fit after  self-cal, rms=0.101864Jy  sigma=0.147340
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.466 mas, bmaj=11.26 mas, bpa=-9.232 degrees
! Estimated noise=5.03407 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0113044 Jy
! Component: 100  -  total flux cleaned = -0.0163793 Jy
! Component: 150  -  total flux cleaned = -0.0194698 Jy
! Component: 200  -  total flux cleaned = -0.0208894 Jy
! Total flux subtracted in 200 components = -0.0208894 Jy
! Clean residual min=-0.008106 max=0.014410 Jy/beam
! Clean residual mean=0.000076 rms=0.002952 Jy/beam
! Combined flux in latest and established models = 0.282569 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 93 components and 0.282568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098525Jy  sigma=0.149788
! Fit after  self-cal, rms=0.098921Jy  sigma=0.149533
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098921Jy  sigma=0.149533
! Fit after  self-cal, rms=0.096866Jy  sigma=0.146852
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=11.28 mas, bpa=-9.347 degrees
! Estimated noise=4.77379 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0105697 Jy
! Component: 100  -  total flux cleaned = -0.0147903 Jy
! Component: 150  -  total flux cleaned = -0.0173446 Jy
! Component: 200  -  total flux cleaned = -0.018691 Jy
! Total flux subtracted in 200 components = -0.018691 Jy
! Clean residual min=-0.007378 max=0.013620 Jy/beam
! Clean residual mean=0.000071 rms=0.002757 Jy/beam
! Combined flux in latest and established models = 0.263877 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 97 components and 0.263877 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093716Jy  sigma=0.149409
! Fit after  self-cal, rms=0.093725Jy  sigma=0.149392
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (13, -11).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0133532 Jy
! Component: 100  -  total flux cleaned = 0.0188023 Jy
! Component: 150  -  total flux cleaned = 0.0195388 Jy
! Component: 200  -  total flux cleaned = 0.0197362 Jy
! Total flux subtracted in 200 components = 0.0197362 Jy
! Clean residual min=-0.005943 max=0.007800 Jy/beam
! Clean residual mean=0.000029 rms=0.001812 Jy/beam
! Combined flux in latest and established models = 0.283614 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 125 components and 0.283614 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090974Jy  sigma=0.144922
! Fit after  self-cal, rms=0.090804Jy  sigma=0.144630
! Inverting map 
! Added new window around map position (-9.5, 51).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00797376 Jy
! Component: 100  -  total flux cleaned = 0.00942732 Jy
! Component: 150  -  total flux cleaned = 0.00978607 Jy
! Component: 200  -  total flux cleaned = 0.00963126 Jy
! Total flux subtracted in 200 components = 0.00963126 Jy
! Clean residual min=-0.004282 max=0.006710 Jy/beam
! Clean residual mean=0.000019 rms=0.001437 Jy/beam
! Combined flux in latest and established models = 0.293245 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 149 components and 0.293245 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089718Jy  sigma=0.143404
! Fit after  self-cal, rms=0.089694Jy  sigma=0.143301
! Inverting map 
! Added new window around map position (5.5, -31).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00466223 Jy
! Component: 100  -  total flux cleaned = 0.00611099 Jy
! Component: 150  -  total flux cleaned = 0.00679977 Jy
! Component: 200  -  total flux cleaned = 0.00692118 Jy
! Total flux subtracted in 200 components = 0.00692118 Jy
! Clean residual min=-0.003950 max=0.004046 Jy/beam
! Clean residual mean=0.000007 rms=0.001143 Jy/beam
! Combined flux in latest and established models = 0.300166 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 179 components and 0.300166 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089094Jy  sigma=0.142454
! Fit after  self-cal, rms=0.089030Jy  sigma=0.142382
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089030Jy  sigma=0.142382
! Fit after  self-cal, rms=0.084771Jy  sigma=0.139104
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.428 mas, bmaj=11.21 mas, bpa=-9.395 degrees
! Estimated noise=4.4122 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00887467 Jy
! Component: 100  -  total flux cleaned = -0.00775407 Jy
! Component: 150  -  total flux cleaned = -0.00625272 Jy
! Component: 200  -  total flux cleaned = -0.00572196 Jy
! Total flux subtracted in 200 components = -0.00572196 Jy
! Clean residual min=-0.002804 max=0.003951 Jy/beam
! Clean residual mean=0.000008 rms=0.000916 Jy/beam
! Combined flux in latest and established models = 0.294444 Jy
selfcal
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 200 components and 0.294444 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.081296Jy  sigma=0.140398
! Fit after  self-cal, rms=0.081250Jy  sigma=0.140366
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000654293 Jy
! Component: 100  -  total flux cleaned = 0.00092335 Jy
! Component: 150  -  total flux cleaned = 0.00092424 Jy
! Component: 200  -  total flux cleaned = 0.00100063 Jy
! Total flux subtracted in 200 components = 0.00100063 Jy
! Clean residual min=-0.002547 max=0.003301 Jy/beam
! Clean residual mean=0.000006 rms=0.000822 Jy/beam
! Combined flux in latest and established models = 0.295445 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 216 components and 0.295445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080930Jy  sigma=0.140268
! Fit after  self-cal, rms=0.080923Jy  sigma=0.140254
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080923Jy  sigma=0.140254
! Fit after  self-cal, rms=0.078764Jy  sigma=0.138475
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.768 mas, bmaj=13.94 mas, bpa=-16.48 degrees
! Estimated noise=4.4519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00797043 Jy
! Component: 100  -  total flux cleaned = -0.00836674 Jy
! Component: 150  -  total flux cleaned = -0.00856568 Jy
! Component: 200  -  total flux cleaned = -0.0085706 Jy
! Total flux subtracted in 200 components = -0.0085706 Jy
! Clean residual min=-0.003025 max=0.003536 Jy/beam
! Clean residual mean=0.000009 rms=0.000919 Jy/beam
! Combined flux in latest and established models = 0.286874 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 231 components and 0.286874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076101Jy  sigma=0.139977
! Fit after  self-cal, rms=0.076031Jy  sigma=0.139867
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000175462 Jy
! Component: 100  -  total flux cleaned = 0.000250348 Jy
! Component: 150  -  total flux cleaned = 0.000312346 Jy
! Component: 200  -  total flux cleaned = 0.000367059 Jy
! Total flux subtracted in 200 components = 0.000367059 Jy
! Clean residual min=-0.002612 max=0.003090 Jy/beam
! Clean residual mean=0.000007 rms=0.000799 Jy/beam
! Combined flux in latest and established models = 0.287241 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 258 components and 0.287241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.075863Jy  sigma=0.139970
! Fit after  self-cal, rms=0.075855Jy  sigma=0.139957
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.395 mas, bmaj=11.16 mas, bpa=-9.31 degrees
! Estimated noise=4.15751 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.395 x 11.16 at -9.31 degrees (North through East)
! Clean map  min=-0.0057543  max=0.16941 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.425 mas, bmaj=10.04 mas, bpa=-8.075 degrees
! Estimated noise=10.492 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.124257 Jy
! Component: 100  -  total flux cleaned = 0.170889 Jy
! Component: 150  -  total flux cleaned = 0.192939 Jy
! Component: 200  -  total flux cleaned = 0.208047 Jy
! Total flux subtracted in 200 components = 0.208047 Jy
! Clean residual min=-0.010566 max=0.012904 Jy/beam
! Clean residual mean=0.000076 rms=0.003004 Jy/beam
! Combined flux in latest and established models = 0.208047 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.208047 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.395 mas, bmaj=11.16 mas, bpa=-9.31 degrees
! Estimated noise=4.15751 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179228 Jy
! Component: 100  -  total flux cleaned = 0.0303299 Jy
! Component: 150  -  total flux cleaned = 0.0397744 Jy
! Component: 200  -  total flux cleaned = 0.0472928 Jy
! Total flux subtracted in 200 components = 0.0472928 Jy
! Clean residual min=-0.005218 max=0.008700 Jy/beam
! Clean residual mean=0.000063 rms=0.001948 Jy/beam
! Combined flux in latest and established models = 0.25534 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 94 components and 0.25534 Jy
! Inverting map 
! Added new window around map position (5, -5.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00782412 Jy
! Component: 100  -  total flux cleaned = 0.0118503 Jy
! Component: 150  -  total flux cleaned = 0.0143544 Jy
! Component: 200  -  total flux cleaned = 0.0162401 Jy
! Total flux subtracted in 200 components = 0.0162401 Jy
! Clean residual min=-0.003909 max=0.005104 Jy/beam
! Clean residual mean=0.000034 rms=0.001267 Jy/beam
! Combined flux in latest and established models = 0.27158 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 136 components and 0.27158 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.768 mas, bmaj=13.94 mas, bpa=-16.48 degrees
! Estimated noise=4.4519 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00535053 Jy
! Component: 100  -  total flux cleaned = 0.00730742 Jy
! Component: 150  -  total flux cleaned = 0.00829982 Jy
! Component: 200  -  total flux cleaned = 0.00906886 Jy
! Total flux subtracted in 200 components = 0.00906886 Jy
! Clean residual min=-0.003713 max=0.005504 Jy/beam
! Clean residual mean=0.000034 rms=0.001367 Jy/beam
! Combined flux in latest and established models = 0.280649 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00070496 Jy
! Component: 100  -  total flux cleaned = 0.00134704 Jy
! Component: 150  -  total flux cleaned = 0.00183493 Jy
! Component: 200  -  total flux cleaned = 0.00228789 Jy
! Total flux subtracted in 200 components = 0.00228789 Jy
! Clean residual min=-0.003002 max=0.004441 Jy/beam
! Clean residual mean=0.000025 rms=0.001111 Jy/beam
! Combined flux in latest and established models = 0.282937 Jy
! Adding 75 model components to the UV plane model.
! The established model now contains 200 components and 0.282937 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.395 mas, bmaj=11.16 mas, bpa=-9.31 degrees
! Estimated noise=4.15751 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000359818 Jy
! Component: 100  -  total flux cleaned = -0.000158356 Jy
! Component: 150  -  total flux cleaned = 1.23287e-05 Jy
! Component: 200  -  total flux cleaned = 0.000170733 Jy
! Total flux subtracted in 200 components = 0.000170733 Jy
! Clean residual min=-0.002729 max=0.003042 Jy/beam
! Clean residual mean=0.000011 rms=0.000734 Jy/beam
! Combined flux in latest and established models = 0.283107 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 230 components and 0.283107 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074711Jy  sigma=0.140783
! Fit after  self-cal, rms=0.074619Jy  sigma=0.140618
wmodel /g0/scr/pima/npcsc_uvs/J2133+8239_S_map.mod
! Writing 230 model components to file: /g0/scr/pima/npcsc_uvs/J2133+8239_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2133+8239_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2133+8239_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2133+8239_S_map.win
! wwins: Wrote 5 windows to /g0/scr/pima/npcsc_uvs/J2133+8239_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000529247 Jy
! Component: 100  -  total flux cleaned = 0.000708411 Jy
! Component: 150  -  total flux cleaned = 0.00113593 Jy
! Component: 200  -  total flux cleaned = 0.00162068 Jy
! Component: 250  -  total flux cleaned = 0.0017736 Jy
! Component: 300  -  total flux cleaned = 0.00195875 Jy
! Component: 350  -  total flux cleaned = 0.00213654 Jy
! Component: 400  -  total flux cleaned = 0.00220432 Jy
! Component: 450  -  total flux cleaned = 0.00210433 Jy
! Component: 500  -  total flux cleaned = 0.00204069 Jy
! Component: 550  -  total flux cleaned = 0.00197791 Jy
! Component: 600  -  total flux cleaned = 0.00176625 Jy
! Component: 650  -  total flux cleaned = 0.00173686 Jy
! Component: 700  -  total flux cleaned = 0.00162115 Jy
! Component: 750  -  total flux cleaned = 0.00145146 Jy
! Component: 800  -  total flux cleaned = 0.00136915 Jy
! Component: 850  -  total flux cleaned = 0.001261 Jy
! Component: 900  -  total flux cleaned = 0.00112887 Jy
! Component: 950  -  total flux cleaned = 0.00102487 Jy
! Component: 1000  -  total flux cleaned = 0.000871974 Jy
! Component: 1050  -  total flux cleaned = 0.000796872 Jy
! Component: 1100  -  total flux cleaned = 0.000747284 Jy
! Component: 1150  -  total flux cleaned = 0.000650481 Jy
! Component: 1200  -  total flux cleaned = 0.000531009 Jy
! Component: 1250  -  total flux cleaned = 0.000484246 Jy
! Component: 1300  -  total flux cleaned = 0.000437794 Jy
! Component: 1350  -  total flux cleaned = 0.000437602 Jy
! Component: 1400  -  total flux cleaned = 0.000437549 Jy
! Component: 1450  -  total flux cleaned = 0.000392532 Jy
! Component: 1500  -  total flux cleaned = 0.000304853 Jy
! Component: 1550  -  total flux cleaned = 0.000348689 Jy
! Component: 1600  -  total flux cleaned = 0.000348353 Jy
! Component: 1650  -  total flux cleaned = 0.000348412 Jy
! Component: 1700  -  total flux cleaned = 0.000390735 Jy
! Component: 1750  -  total flux cleaned = 0.000432769 Jy
! Component: 1800  -  total flux cleaned = 0.000556457 Jy
! Component: 1850  -  total flux cleaned = 0.000597466 Jy
! Component: 1900  -  total flux cleaned = 0.000698515 Jy
! Component: 1950  -  total flux cleaned = 0.000678272 Jy
! Component: 2000  -  total flux cleaned = 0.000718042 Jy
! Component: 2050  -  total flux cleaned = 0.000815987 Jy
! Component: 2100  -  total flux cleaned = 0.000777245 Jy
! Component: 2150  -  total flux cleaned = 0.000835244 Jy
! Component: 2200  -  total flux cleaned = 0.000892824 Jy
! Component: 2250  -  total flux cleaned = 0.000987322 Jy
! Component: 2300  -  total flux cleaned = 0.000949185 Jy
! Component: 2350  -  total flux cleaned = 0.0010051 Jy
! Component: 2400  -  total flux cleaned = 0.00106062 Jy
! Component: 2450  -  total flux cleaned = 0.00111581 Jy
! Component: 2500  -  total flux cleaned = 0.00122521 Jy
! Component: 2550  -  total flux cleaned = 0.0011525 Jy
! Component: 2600  -  total flux cleaned = 0.00113452 Jy
! Component: 2650  -  total flux cleaned = 0.00118837 Jy
! Component: 2700  -  total flux cleaned = 0.00131252 Jy
! Component: 2750  -  total flux cleaned = 0.00133012 Jy
! Component: 2800  -  total flux cleaned = 0.00138253 Jy
! Component: 2850  -  total flux cleaned = 0.001452 Jy
! Component: 2900  -  total flux cleaned = 0.0014692 Jy
! Component: 2950  -  total flux cleaned = 0.00155495 Jy
! Component: 3000  -  total flux cleaned = 0.00160598 Jy
! Component: 3050  -  total flux cleaned = 0.0016399 Jy
! Component: 3100  -  total flux cleaned = 0.00167353 Jy
! Component: 3150  -  total flux cleaned = 0.0016233 Jy
! Component: 3200  -  total flux cleaned = 0.00165654 Jy
! Component: 3250  -  total flux cleaned = 0.00170617 Jy
! Component: 3300  -  total flux cleaned = 0.00165668 Jy
! Component: 3350  -  total flux cleaned = 0.00178736 Jy
! Component: 3400  -  total flux cleaned = 0.00173863 Jy
! Component: 3450  -  total flux cleaned = 0.00178713 Jy
! Component: 3500  -  total flux cleaned = 0.00181927 Jy
! Component: 3550  -  total flux cleaned = 0.00191505 Jy
! Component: 3600  -  total flux cleaned = 0.00191509 Jy
! Component: 3650  -  total flux cleaned = 0.00200982 Jy
! Component: 3700  -  total flux cleaned = 0.00202543 Jy
! Component: 3750  -  total flux cleaned = 0.00207257 Jy
! Component: 3800  -  total flux cleaned = 0.00216596 Jy
! Component: 3850  -  total flux cleaned = 0.00221243 Jy
! Component: 3900  -  total flux cleaned = 0.00232031 Jy
! Component: 3950  -  total flux cleaned = 0.00244288 Jy
! Component: 4000  -  total flux cleaned = 0.00248859 Jy
! Component: 4050  -  total flux cleaned = 0.00254922 Jy
! Total flux subtracted in 4096 components = 0.00260966 Jy
! Clean residual min=-0.000906 max=0.000883 Jy/beam
! Clean residual mean=0.000004 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.285717 Jy
keep
! Adding 270 model components to the UV plane model.
! The established model now contains 499 components and 0.285717 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2133+8239_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.395 x 11.16 at -9.31 degrees (North through East)
! Clean map  min=-0.0050426  max=0.16651 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2133+8239_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.166511 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000269177 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.484971 0.484971 0.969943 1.93989 3.87977 7.75954 15.5191 31.0382 62.0763
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.166 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2133+8239_S_uvs.log closed on Sun Oct  6 14:31:58 2013