! Started logfile: /g0/scr/pima/npcsc_uvs/J2109+8021_X_uvs.log on Sun Oct 6 14:27:15 2013 obs /g0/scr/pima/npcsc_uvs/J2109+8021_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2109+8021_X_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.955556 visibilities/baseline/integration-bin. ! Found source: J2109+8021 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 7912 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2109+8021_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.001500Jy sigma=0.804281 ! Fit after self-cal, rms=0.953063Jy sigma=0.727470 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.6702 mas, bmaj=2.603 mas, bpa=-6.66 degrees ! Estimated noise=21.7525 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0565568 Jy ! Component: 100 - total flux cleaned = 0.0689232 Jy ! Total flux subtracted in 100 components = 0.0689232 Jy ! Clean residual min=-0.006675 max=0.007450 Jy/beam ! Clean residual mean=-0.000004 rms=0.001632 Jy/beam ! Combined flux in latest and established models = 0.0689232 Jy ! Performing phase self-cal ! Adding 2 model components to the UV plane model. ! The established model now contains 2 components and 0.0689232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085251Jy sigma=0.077722 ! Fit after self-cal, rms=0.083513Jy sigma=0.076487 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8606 mas, bmaj=2.821 mas, bpa=-6.982 degrees ! Estimated noise=11.1807 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00606199 Jy ! Component: 100 - total flux cleaned = 0.00712045 Jy ! Component: 150 - total flux cleaned = 0.00716135 Jy ! Component: 200 - total flux cleaned = 0.00713597 Jy ! Total flux subtracted in 200 components = 0.00713597 Jy ! Clean residual min=-0.003685 max=0.004677 Jy/beam ! Clean residual mean=-0.000005 rms=0.000935 Jy/beam ! Combined flux in latest and established models = 0.0760591 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.0760591 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.085260Jy sigma=0.074817 ! Fit after self-cal, rms=0.085256Jy sigma=0.074816 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.98 HN 0.95 KP 1.00 ! LA 0.87 MK 0.90 NL 0.97 OV 0.87 ! PT 0.95 SC 0.87 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.81 FD 0.91 HN 0.85 KP 0.79 ! LA 0.90 MK 0.88 NL 0.91 OV 0.88 ! PT 1.01 SC 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.82 FD 0.81 HN 0.89 KP 0.73 ! LA 0.99 MK 0.84 NL 0.90 OV 0.80 ! PT 1.12 SC 0.83 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.87 HN 0.89 KP 0.84 ! LA 0.94 MK 0.74 NL 0.83 OV 0.92 ! PT 0.93 SC 0.90 ! ! ! Fit before self-cal, rms=0.085256Jy sigma=0.074816 ! Fit after self-cal, rms=0.072407Jy sigma=0.071940 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8496 mas, bmaj=2.8 mas, bpa=-6.68 degrees ! Estimated noise=8.61928 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.013461 Jy ! Component: 100 - total flux cleaned = -0.0162982 Jy ! Component: 150 - total flux cleaned = -0.0159916 Jy ! Component: 200 - total flux cleaned = -0.0156534 Jy ! Total flux subtracted in 200 components = -0.0156534 Jy ! Clean residual min=-0.002842 max=0.002845 Jy/beam ! Clean residual mean=-0.000005 rms=0.000660 Jy/beam ! Combined flux in latest and established models = 0.0604057 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 17 components and 0.0604057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065789Jy sigma=0.074034 ! Fit after self-cal, rms=0.065906Jy sigma=0.073986 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065906Jy sigma=0.073986 ! Fit after self-cal, rms=0.056752Jy sigma=0.071849 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8451 mas, bmaj=2.797 mas, bpa=-6.56 degrees ! Estimated noise=6.73141 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0105184 Jy ! Component: 100 - total flux cleaned = -0.0128166 Jy ! Component: 150 - total flux cleaned = -0.0127783 Jy ! Component: 200 - total flux cleaned = -0.0125471 Jy ! Total flux subtracted in 200 components = -0.0125471 Jy ! Clean residual min=-0.002143 max=0.002153 Jy/beam ! Clean residual mean=-0.000004 rms=0.000510 Jy/beam ! Combined flux in latest and established models = 0.0478587 Jy selfcal ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 19 components and 0.0478587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051587Jy sigma=0.073978 ! Fit after self-cal, rms=0.051601Jy sigma=0.073976 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000188605 Jy ! Component: 100 - total flux cleaned = 0.000354558 Jy ! Component: 150 - total flux cleaned = 0.000486496 Jy ! Component: 200 - total flux cleaned = 0.00058342 Jy ! Total flux subtracted in 200 components = 0.00058342 Jy ! Clean residual min=-0.002112 max=0.002140 Jy/beam ! Clean residual mean=-0.000004 rms=0.000508 Jy/beam ! Combined flux in latest and established models = 0.0484421 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 21 components and 0.0484421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051544Jy sigma=0.074038 ! Fit after self-cal, rms=0.051542Jy sigma=0.074037 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.051542Jy sigma=0.074037 ! Fit after self-cal, rms=0.044424Jy sigma=0.071822 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8405 mas, bmaj=2.796 mas, bpa=-6.452 degrees ! Estimated noise=5.29413 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00778194 Jy ! Component: 100 - total flux cleaned = -0.00948192 Jy ! Component: 150 - total flux cleaned = -0.00968417 Jy ! Component: 200 - total flux cleaned = -0.00958965 Jy ! Total flux subtracted in 200 components = -0.00958965 Jy ! Clean residual min=-0.001656 max=0.001669 Jy/beam ! Clean residual mean=-0.000003 rms=0.000397 Jy/beam ! Combined flux in latest and established models = 0.0388524 Jy selfcal ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 22 components and 0.0388524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040656Jy sigma=0.073985 ! Fit after self-cal, rms=0.040658Jy sigma=0.073983 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.26017e-05 Jy ! Component: 100 - total flux cleaned = 5.79792e-05 Jy ! Component: 150 - total flux cleaned = 7.00753e-05 Jy ! Component: 200 - total flux cleaned = 8.12177e-05 Jy ! Total flux subtracted in 200 components = 8.12177e-05 Jy ! Clean residual min=-0.001644 max=0.001664 Jy/beam ! Clean residual mean=-0.000003 rms=0.000396 Jy/beam ! Combined flux in latest and established models = 0.0389337 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 26 components and 0.0389337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040638Jy sigma=0.074009 ! Fit after self-cal, rms=0.040637Jy sigma=0.074008 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.040637Jy sigma=0.074008 ! Fit after self-cal, rms=0.034960Jy sigma=0.071790 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.972 mas, bmaj=3.152 mas, bpa=-5.855 degrees ! Estimated noise=5.66358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00601708 Jy ! Component: 100 - total flux cleaned = -0.00733574 Jy ! Component: 150 - total flux cleaned = -0.00769535 Jy ! Component: 200 - total flux cleaned = -0.00772442 Jy ! Total flux subtracted in 200 components = -0.00772442 Jy ! Clean residual min=-0.001600 max=0.001815 Jy/beam ! Clean residual mean=-0.000005 rms=0.000460 Jy/beam ! Combined flux in latest and established models = 0.0312092 Jy selfcal ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 30 components and 0.0312092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032055Jy sigma=0.073855 ! Fit after self-cal, rms=0.032056Jy sigma=0.073852 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -6.21748e-06 Jy ! Component: 100 - total flux cleaned = -3.59661e-05 Jy ! Component: 150 - total flux cleaned = -4.8501e-05 Jy ! Component: 200 - total flux cleaned = -5.41067e-05 Jy ! Total flux subtracted in 200 components = -5.41067e-05 Jy ! Clean residual min=-0.001624 max=0.001788 Jy/beam ! Clean residual mean=-0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0311551 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 31 components and 0.0311551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.032023Jy sigma=0.073927 ! Fit after self-cal, rms=0.032021Jy sigma=0.073925 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.8362 mas, bmaj=2.797 mas, bpa=-6.348 degrees ! Estimated noise=4.15985 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8362 x 2.797 at -6.348 degrees (North through East) ! Clean map min=-0.0012066 max=0.028467 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6564 mas, bmaj=2.622 mas, bpa=-6.107 degrees ! Estimated noise=7.90584 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0212531 Jy ! Component: 100 - total flux cleaned = 0.0260575 Jy ! Component: 150 - total flux cleaned = 0.0274382 Jy ! Component: 200 - total flux cleaned = 0.0281315 Jy ! Total flux subtracted in 200 components = 0.0281315 Jy ! Clean residual min=-0.002313 max=0.002278 Jy/beam ! Clean residual mean=-0.000001 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 0.0281315 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0281315 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8362 mas, bmaj=2.797 mas, bpa=-6.348 degrees ! Estimated noise=4.15985 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139536 Jy ! Component: 100 - total flux cleaned = 0.00199645 Jy ! Component: 150 - total flux cleaned = 0.00237521 Jy ! Component: 200 - total flux cleaned = 0.00263564 Jy ! Total flux subtracted in 200 components = 0.00263564 Jy ! Clean residual min=-0.001303 max=0.001298 Jy/beam ! Clean residual mean=-0.000002 rms=0.000312 Jy/beam ! Combined flux in latest and established models = 0.0307672 Jy ! Adding 13 model components to the UV plane model. ! The established model now contains 23 components and 0.0307672 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.972 mas, bmaj=3.152 mas, bpa=-5.855 degrees ! Estimated noise=5.66358 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000368842 Jy ! Component: 100 - total flux cleaned = 0.000394739 Jy ! Component: 150 - total flux cleaned = 0.000394439 Jy ! Component: 200 - total flux cleaned = 0.000394451 Jy ! Total flux subtracted in 200 components = 0.000394451 Jy ! Clean residual min=-0.001609 max=0.001800 Jy/beam ! Clean residual mean=-0.000005 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 0.0311616 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.2141e-06 Jy ! Component: 100 - total flux cleaned = 5.41686e-06 Jy ! Component: 150 - total flux cleaned = 5.39655e-06 Jy ! Component: 200 - total flux cleaned = 5.41735e-06 Jy ! Total flux subtracted in 200 components = 5.41735e-06 Jy ! Clean residual min=-0.001612 max=0.001784 Jy/beam ! Clean residual mean=-0.000005 rms=0.000456 Jy/beam ! Combined flux in latest and established models = 0.031167 Jy ! Adding 15 model components to the UV plane model. ! The established model now contains 34 components and 0.0311671 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8362 mas, bmaj=2.797 mas, bpa=-6.348 degrees ! Estimated noise=4.15985 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000136627 Jy ! Component: 100 - total flux cleaned = -0.000137903 Jy ! Component: 150 - total flux cleaned = -0.000128988 Jy ! Component: 200 - total flux cleaned = -0.000114009 Jy ! Total flux subtracted in 200 components = -0.000114009 Jy ! Clean residual min=-0.001295 max=0.001307 Jy/beam ! Clean residual mean=-0.000002 rms=0.000310 Jy/beam ! Combined flux in latest and established models = 0.031053 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 44 components and 0.031053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.031938Jy sigma=0.074082 ! Fit after self-cal, rms=0.031935Jy sigma=0.074080 wmodel /g0/scr/pima/npcsc_uvs/J2109+8021_X_map.mod ! Writing 44 model components to file: /g0/scr/pima/npcsc_uvs/J2109+8021_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J2109+8021_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2109+8021_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J2109+8021_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2109+8021_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -2.57236e-05 Jy ! Component: 100 - total flux cleaned = 0.000129937 Jy ! Component: 150 - total flux cleaned = 0.000318341 Jy ! Component: 200 - total flux cleaned = 0.000476883 Jy ! Component: 250 - total flux cleaned = 0.000533129 Jy ! Component: 300 - total flux cleaned = 0.000551163 Jy ! Component: 350 - total flux cleaned = 0.000640421 Jy ! Component: 400 - total flux cleaned = 0.00072806 Jy ! Component: 450 - total flux cleaned = 0.000847093 Jy ! Component: 500 - total flux cleaned = 0.000913521 Jy ! Component: 550 - total flux cleaned = 0.00105905 Jy ! Component: 600 - total flux cleaned = 0.00112205 Jy ! Component: 650 - total flux cleaned = 0.00118416 Jy ! Component: 700 - total flux cleaned = 0.00124542 Jy ! Component: 750 - total flux cleaned = 0.00129042 Jy ! Component: 800 - total flux cleaned = 0.00140865 Jy ! Component: 850 - total flux cleaned = 0.00146656 Jy ! Component: 900 - total flux cleaned = 0.00152384 Jy ! Component: 950 - total flux cleaned = 0.00156631 Jy ! Component: 1000 - total flux cleaned = 0.00160811 Jy ! Component: 1050 - total flux cleaned = 0.0017179 Jy ! Component: 1100 - total flux cleaned = 0.00178572 Jy ! Component: 1150 - total flux cleaned = 0.00182579 Jy ! Component: 1200 - total flux cleaned = 0.00195801 Jy ! Component: 1250 - total flux cleaned = 0.00201006 Jy ! Component: 1300 - total flux cleaned = 0.00207446 Jy ! Component: 1350 - total flux cleaned = 0.00218932 Jy ! Component: 1400 - total flux cleaned = 0.00223964 Jy ! Component: 1450 - total flux cleaned = 0.00237677 Jy ! Component: 1500 - total flux cleaned = 0.00243842 Jy ! Component: 1550 - total flux cleaned = 0.00252384 Jy ! Component: 1600 - total flux cleaned = 0.0026084 Jy ! Component: 1650 - total flux cleaned = 0.00270363 Jy ! Component: 1700 - total flux cleaned = 0.00276246 Jy ! Component: 1750 - total flux cleaned = 0.00283247 Jy ! Component: 1800 - total flux cleaned = 0.00291322 Jy ! Component: 1850 - total flux cleaned = 0.00297035 Jy ! Component: 1900 - total flux cleaned = 0.00302697 Jy ! Component: 1950 - total flux cleaned = 0.0031167 Jy ! Component: 2000 - total flux cleaned = 0.00318314 Jy ! Component: 2050 - total flux cleaned = 0.00322726 Jy ! Component: 2100 - total flux cleaned = 0.00332544 Jy ! Component: 2150 - total flux cleaned = 0.00341187 Jy ! Component: 2200 - total flux cleaned = 0.00343317 Jy ! Component: 2250 - total flux cleaned = 0.003497 Jy ! Component: 2300 - total flux cleaned = 0.00354966 Jy ! Component: 2350 - total flux cleaned = 0.00360168 Jy ! Component: 2400 - total flux cleaned = 0.00363281 Jy ! Component: 2450 - total flux cleaned = 0.00369436 Jy ! Component: 2500 - total flux cleaned = 0.00369429 Jy ! Component: 2550 - total flux cleaned = 0.00372438 Jy ! Component: 2600 - total flux cleaned = 0.00374431 Jy ! Component: 2650 - total flux cleaned = 0.00380393 Jy ! Component: 2700 - total flux cleaned = 0.00379397 Jy ! Component: 2750 - total flux cleaned = 0.00381365 Jy ! Component: 2800 - total flux cleaned = 0.00384294 Jy ! Component: 2850 - total flux cleaned = 0.00386236 Jy ! Component: 2900 - total flux cleaned = 0.00392006 Jy ! Component: 2950 - total flux cleaned = 0.0038915 Jy ! Component: 3000 - total flux cleaned = 0.00390104 Jy ! Component: 3050 - total flux cleaned = 0.00391998 Jy ! Component: 3100 - total flux cleaned = 0.0039012 Jy ! Component: 3150 - total flux cleaned = 0.00388249 Jy ! Component: 3200 - total flux cleaned = 0.0038917 Jy ! Component: 3250 - total flux cleaned = 0.00387325 Jy ! Component: 3300 - total flux cleaned = 0.00391887 Jy ! Component: 3350 - total flux cleaned = 0.00389165 Jy ! Component: 3400 - total flux cleaned = 0.00389167 Jy ! Component: 3450 - total flux cleaned = 0.00391856 Jy ! Component: 3500 - total flux cleaned = 0.00390967 Jy ! Component: 3550 - total flux cleaned = 0.00390978 Jy ! Component: 3600 - total flux cleaned = 0.00394498 Jy ! Component: 3650 - total flux cleaned = 0.00392745 Jy ! Component: 3700 - total flux cleaned = 0.00390141 Jy ! Component: 3750 - total flux cleaned = 0.00392743 Jy ! Component: 3800 - total flux cleaned = 0.00394465 Jy ! Component: 3850 - total flux cleaned = 0.0039874 Jy ! Component: 3900 - total flux cleaned = 0.00394484 Jy ! Component: 3950 - total flux cleaned = 0.00397866 Jy ! Component: 4000 - total flux cleaned = 0.00398701 Jy ! Component: 4050 - total flux cleaned = 0.00396204 Jy ! Total flux subtracted in 4096 components = 0.00400367 Jy ! Clean residual min=-0.000581 max=0.000519 Jy/beam ! Clean residual mean=-0.000001 rms=0.000146 Jy/beam ! Combined flux in latest and established models = 0.0350567 Jy keep ! Adding 295 model components to the UV plane model. ! The established model now contains 339 components and 0.0350567 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J2109+8021_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8362 x 2.797 at -6.348 degrees (North through East) ! Clean map min=-0.0009965 max=0.028298 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2109+8021_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0282984 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000147677 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.56557 1.56557 3.13115 6.26229 12.5246 25.0492 50.0983 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.028 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J2109+8021_X_uvs.log closed on Sun Oct 6 14:27:19 2013