! Started logfile: /g0/scr/pima/npcsc_uvs/J2101+0341_S_uvs.log on Sun Oct  6 14:31:31 2013
obs /g0/scr/pima/npcsc_uvs/J2101+0341_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2101+0341_S_uva.fits
! AN table 1: 7 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.971429 visibilities/baseline/integration-bin.
! Found source: J2101+0341
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1224 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2101+0341_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.125649Jy  sigma=4.296203
! Fit after  self-cal, rms=0.544928Jy  sigma=1.944656
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.959 mas, bmaj=7.265 mas, bpa=-3.884 degrees
! Estimated noise=6.78053 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.368552 Jy
! Component: 100  -  total flux cleaned = 0.460996 Jy
! Total flux subtracted in 100 components = 0.460996 Jy
! Clean residual min=-0.018864 max=0.034883 Jy/beam
! Clean residual mean=0.000081 rms=0.005929 Jy/beam
! Combined flux in latest and established models = 0.460996 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.460996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.128201Jy  sigma=0.503613
! Fit after  self-cal, rms=0.128212Jy  sigma=0.503499
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.426 mas, bmaj=7.888 mas, bpa=-2.083 degrees
! Estimated noise=5.53831 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0452473 Jy
! Component: 100  -  total flux cleaned = 0.0700827 Jy
! Component: 150  -  total flux cleaned = 0.0851582 Jy
! Component: 200  -  total flux cleaned = 0.0945881 Jy
! Total flux subtracted in 200 components = 0.0945881 Jy
! Clean residual min=-0.019603 max=0.018390 Jy/beam
! Clean residual mean=0.000037 rms=0.004086 Jy/beam
! Combined flux in latest and established models = 0.555584 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 27 components and 0.555584 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.115506Jy  sigma=0.426487
! Fit after  self-cal, rms=0.115502Jy  sigma=0.426384
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.97     HN        0.92     KP        0.99     
!   LA        1.11     MK        0.98     NL        1.01     OV        1.00     
!   PT        1.06     SC        0.92     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        0.98     KP        0.97     
!   LA        1.08     MK        0.98     NL        0.98     OV        1.00     
!   PT        1.03     SC        0.91     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.55     FD        1.01     HN        0.96     KP        0.97     
!   LA        0.87     MK        1.10     NL        1.10     OV        1.02     
!   PT        1.09     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.01     HN        0.98     KP        0.91     
!   LA        0.71     MK        1.12     NL        1.02     OV        0.88     
!   PT        0.95     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.115502Jy  sigma=0.426384
! Fit after  self-cal, rms=0.090386Jy  sigma=0.313033
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.449 mas, bmaj=7.976 mas, bpa=-1.581 degrees
! Estimated noise=5.49276 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00728986 Jy
! Component: 100  -  total flux cleaned = -0.00936368 Jy
! Component: 150  -  total flux cleaned = -0.0101711 Jy
! Component: 200  -  total flux cleaned = -0.0103654 Jy
! Total flux subtracted in 200 components = -0.0103654 Jy
! Clean residual min=-0.007339 max=0.006523 Jy/beam
! Clean residual mean=0.000007 rms=0.001717 Jy/beam
! Combined flux in latest and established models = 0.545219 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 34 components and 0.545219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088910Jy  sigma=0.313211
! Fit after  self-cal, rms=0.088979Jy  sigma=0.313059
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088979Jy  sigma=0.313059
! Fit after  self-cal, rms=0.088757Jy  sigma=0.311767
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.444 mas, bmaj=7.982 mas, bpa=-1.741 degrees
! Estimated noise=5.41691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0067142 Jy
! Component: 100  -  total flux cleaned = -0.00863375 Jy
! Component: 150  -  total flux cleaned = -0.0091764 Jy
! Component: 200  -  total flux cleaned = -0.00925262 Jy
! Total flux subtracted in 200 components = -0.00925262 Jy
! Clean residual min=-0.007070 max=0.006264 Jy/beam
! Clean residual mean=0.000006 rms=0.001638 Jy/beam
! Combined flux in latest and established models = 0.535966 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 36 components and 0.535966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087401Jy  sigma=0.312464
! Fit after  self-cal, rms=0.087395Jy  sigma=0.312449
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00014949 Jy
! Component: 100  -  total flux cleaned = -0.000152147 Jy
! Component: 150  -  total flux cleaned = -8.50857e-05 Jy
! Component: 200  -  total flux cleaned = -8.757e-05 Jy
! Total flux subtracted in 200 components = -8.757e-05 Jy
! Clean residual min=-0.006983 max=0.006116 Jy/beam
! Clean residual mean=0.000007 rms=0.001620 Jy/beam
! Combined flux in latest and established models = 0.535879 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 37 components and 0.535879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087202Jy  sigma=0.312320
! Fit after  self-cal, rms=0.087196Jy  sigma=0.312311
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.087196Jy  sigma=0.312311
! Fit after  self-cal, rms=0.086976Jy  sigma=0.310960
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.437 mas, bmaj=7.98 mas, bpa=-1.83 degrees
! Estimated noise=5.33611 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00631339 Jy
! Component: 100  -  total flux cleaned = -0.0080117 Jy
! Component: 150  -  total flux cleaned = -0.00827758 Jy
! Component: 200  -  total flux cleaned = -0.00827619 Jy
! Total flux subtracted in 200 components = -0.00827619 Jy
! Clean residual min=-0.006762 max=0.006046 Jy/beam
! Clean residual mean=0.000006 rms=0.001572 Jy/beam
! Combined flux in latest and established models = 0.527602 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 37 components and 0.527602 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085698Jy  sigma=0.312009
! Fit after  self-cal, rms=0.085697Jy  sigma=0.312002
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.83391e-05 Jy
! Component: 100  -  total flux cleaned = 1.40077e-05 Jy
! Component: 150  -  total flux cleaned = 1.38258e-05 Jy
! Component: 200  -  total flux cleaned = 1.38128e-05 Jy
! Total flux subtracted in 200 components = 1.38128e-05 Jy
! Clean residual min=-0.006708 max=0.005947 Jy/beam
! Clean residual mean=0.000006 rms=0.001562 Jy/beam
! Combined flux in latest and established models = 0.527616 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 38 components and 0.527616 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085574Jy  sigma=0.311962
! Fit after  self-cal, rms=0.085572Jy  sigma=0.311957
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085572Jy  sigma=0.311957
! Fit after  self-cal, rms=0.085360Jy  sigma=0.310606
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.668 mas, bmaj=12.4 mas, bpa=4.373 degrees
! Estimated noise=5.96767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00550796 Jy
! Component: 100  -  total flux cleaned = -0.0073576 Jy
! Component: 150  -  total flux cleaned = -0.00751956 Jy
! Component: 200  -  total flux cleaned = -0.00763254 Jy
! Total flux subtracted in 200 components = -0.00763254 Jy
! Clean residual min=-0.007147 max=0.005952 Jy/beam
! Clean residual mean=0.000011 rms=0.001882 Jy/beam
! Combined flux in latest and established models = 0.519984 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 44 components and 0.519984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084327Jy  sigma=0.311551
! Fit after  self-cal, rms=0.084337Jy  sigma=0.311518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.16617e-05 Jy
! Component: 100  -  total flux cleaned = -8.13611e-05 Jy
! Component: 150  -  total flux cleaned = -6.24534e-05 Jy
! Component: 200  -  total flux cleaned = -4.59641e-05 Jy
! Total flux subtracted in 200 components = -4.59641e-05 Jy
! Clean residual min=-0.007185 max=0.005900 Jy/beam
! Clean residual mean=0.000011 rms=0.001879 Jy/beam
! Combined flux in latest and established models = 0.519938 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 48 components and 0.519938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084270Jy  sigma=0.311661
! Fit after  self-cal, rms=0.084277Jy  sigma=0.311653
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=7.976 mas, bpa=-1.904 degrees
! Estimated noise=5.25389 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.43 x 7.976 at -1.904 degrees (North through East)
! Clean map  min=-0.0062654  max=0.45104 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.955 mas, bmaj=7.28 mas, bpa=-3.612 degrees
! Estimated noise=6.46765 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.351492 Jy
! Component: 100  -  total flux cleaned = 0.439214 Jy
! Component: 150  -  total flux cleaned = 0.471817 Jy
! Component: 200  -  total flux cleaned = 0.487641 Jy
! Total flux subtracted in 200 components = 0.487641 Jy
! Clean residual min=-0.007913 max=0.009383 Jy/beam
! Clean residual mean=0.000024 rms=0.002199 Jy/beam
! Combined flux in latest and established models = 0.487641 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.487641 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=7.976 mas, bpa=-1.904 degrees
! Estimated noise=5.25389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0120872 Jy
! Component: 100  -  total flux cleaned = 0.0189316 Jy
! Component: 150  -  total flux cleaned = 0.0232286 Jy
! Component: 200  -  total flux cleaned = 0.0260099 Jy
! Total flux subtracted in 200 components = 0.0260099 Jy
! Clean residual min=-0.006772 max=0.006055 Jy/beam
! Clean residual mean=0.000013 rms=0.001581 Jy/beam
! Combined flux in latest and established models = 0.513651 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 56 components and 0.513651 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.668 mas, bmaj=12.4 mas, bpa=4.373 degrees
! Estimated noise=5.96767 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00303389 Jy
! Component: 100  -  total flux cleaned = 0.00425647 Jy
! Component: 150  -  total flux cleaned = 0.00448941 Jy
! Component: 200  -  total flux cleaned = 0.00465486 Jy
! Total flux subtracted in 200 components = 0.00465486 Jy
! Clean residual min=-0.007373 max=0.005763 Jy/beam
! Clean residual mean=0.000015 rms=0.001877 Jy/beam
! Combined flux in latest and established models = 0.518305 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144049 Jy
! Component: 100  -  total flux cleaned = 0.000295716 Jy
! Component: 150  -  total flux cleaned = 0.000432219 Jy
! Component: 200  -  total flux cleaned = 0.000554988 Jy
! Total flux subtracted in 200 components = 0.000554988 Jy
! Clean residual min=-0.007324 max=0.005799 Jy/beam
! Clean residual mean=0.000013 rms=0.001873 Jy/beam
! Combined flux in latest and established models = 0.51886 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 64 components and 0.51886 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.43 mas, bmaj=7.976 mas, bpa=-1.904 degrees
! Estimated noise=5.25389 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00068088 Jy
! Component: 100  -  total flux cleaned = -0.000563252 Jy
! Component: 150  -  total flux cleaned = -0.000411277 Jy
! Component: 200  -  total flux cleaned = -0.000365911 Jy
! Total flux subtracted in 200 components = -0.000365911 Jy
! Clean residual min=-0.006658 max=0.005757 Jy/beam
! Clean residual mean=0.000007 rms=0.001537 Jy/beam
! Combined flux in latest and established models = 0.518495 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 73 components and 0.518495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084243Jy  sigma=0.312347
! Fit after  self-cal, rms=0.084238Jy  sigma=0.312324
wmodel /g0/scr/pima/npcsc_uvs/J2101+0341_S_map.mod
! Writing 73 model components to file: /g0/scr/pima/npcsc_uvs/J2101+0341_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2101+0341_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2101+0341_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2101+0341_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2101+0341_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00192747 Jy
! Component: 100  -  total flux cleaned = -0.00183167 Jy
! Component: 150  -  total flux cleaned = -0.00192571 Jy
! Component: 200  -  total flux cleaned = -0.00210489 Jy
! Component: 250  -  total flux cleaned = -0.00236226 Jy
! Component: 300  -  total flux cleaned = -0.00236357 Jy
! Component: 350  -  total flux cleaned = -0.00275547 Jy
! Component: 400  -  total flux cleaned = -0.00283242 Jy
! Component: 450  -  total flux cleaned = -0.00298171 Jy
! Component: 500  -  total flux cleaned = -0.00319682 Jy
! Component: 550  -  total flux cleaned = -0.0034031 Jy
! Component: 600  -  total flux cleaned = -0.00360176 Jy
! Component: 650  -  total flux cleaned = -0.00360083 Jy
! Component: 700  -  total flux cleaned = -0.00359988 Jy
! Component: 750  -  total flux cleaned = -0.00359985 Jy
! Component: 800  -  total flux cleaned = -0.00365998 Jy
! Component: 850  -  total flux cleaned = -0.00365966 Jy
! Component: 900  -  total flux cleaned = -0.00360175 Jy
! Component: 950  -  total flux cleaned = -0.00348984 Jy
! Component: 1000  -  total flux cleaned = -0.00349175 Jy
! Component: 1050  -  total flux cleaned = -0.00365324 Jy
! Component: 1100  -  total flux cleaned = -0.00370492 Jy
! Component: 1150  -  total flux cleaned = -0.00365389 Jy
! Component: 1200  -  total flux cleaned = -0.00370525 Jy
! Component: 1250  -  total flux cleaned = -0.00360713 Jy
! Component: 1300  -  total flux cleaned = -0.00375258 Jy
! Component: 1350  -  total flux cleaned = -0.00384733 Jy
! Component: 1400  -  total flux cleaned = -0.00394048 Jy
! Component: 1450  -  total flux cleaned = -0.00389388 Jy
! Component: 1500  -  total flux cleaned = -0.00389469 Jy
! Component: 1550  -  total flux cleaned = -0.00389558 Jy
! Component: 1600  -  total flux cleaned = -0.00398331 Jy
! Component: 1650  -  total flux cleaned = -0.00407009 Jy
! Component: 1700  -  total flux cleaned = -0.00419782 Jy
! Component: 1750  -  total flux cleaned = -0.0042399 Jy
! Component: 1800  -  total flux cleaned = -0.00444626 Jy
! Component: 1850  -  total flux cleaned = -0.00452716 Jy
! Component: 1900  -  total flux cleaned = -0.00456638 Jy
! Component: 1950  -  total flux cleaned = -0.00456696 Jy
! Component: 2000  -  total flux cleaned = -0.00476293 Jy
! Component: 2050  -  total flux cleaned = -0.00487886 Jy
! Component: 2100  -  total flux cleaned = -0.00495512 Jy
! Component: 2150  -  total flux cleaned = -0.00506827 Jy
! Component: 2200  -  total flux cleaned = -0.00532807 Jy
! Component: 2250  -  total flux cleaned = -0.00543737 Jy
! Component: 2300  -  total flux cleaned = -0.005582 Jy
! Component: 2350  -  total flux cleaned = -0.00561787 Jy
! Component: 2400  -  total flux cleaned = -0.00579477 Jy
! Component: 2450  -  total flux cleaned = -0.00593423 Jy
! Component: 2500  -  total flux cleaned = -0.0060031 Jy
! Component: 2550  -  total flux cleaned = -0.00620769 Jy
! Component: 2600  -  total flux cleaned = -0.00637652 Jy
! Component: 2650  -  total flux cleaned = -0.00657748 Jy
! Component: 2700  -  total flux cleaned = -0.00674313 Jy
! Component: 2750  -  total flux cleaned = -0.00690674 Jy
! Component: 2800  -  total flux cleaned = -0.00706874 Jy
! Component: 2850  -  total flux cleaned = -0.0071973 Jy
! Component: 2900  -  total flux cleaned = -0.0073883 Jy
! Component: 2950  -  total flux cleaned = -0.0075148 Jy
! Component: 3000  -  total flux cleaned = -0.00776395 Jy
! Component: 3050  -  total flux cleaned = -0.00776369 Jy
! Component: 3100  -  total flux cleaned = -0.00800888 Jy
! Component: 3150  -  total flux cleaned = -0.00816055 Jy
! Component: 3200  -  total flux cleaned = -0.00828092 Jy
! Component: 3250  -  total flux cleaned = -0.00848985 Jy
! Component: 3300  -  total flux cleaned = -0.00860811 Jy
! Component: 3350  -  total flux cleaned = -0.0086664 Jy
! Component: 3400  -  total flux cleaned = -0.00884098 Jy
! Component: 3450  -  total flux cleaned = -0.008985 Jy
! Component: 3500  -  total flux cleaned = -0.00904225 Jy
! Component: 3550  -  total flux cleaned = -0.00924085 Jy
! Component: 3600  -  total flux cleaned = -0.00926885 Jy
! Component: 3650  -  total flux cleaned = -0.00938027 Jy
! Component: 3700  -  total flux cleaned = -0.00949114 Jy
! Component: 3750  -  total flux cleaned = -0.00965554 Jy
! Component: 3800  -  total flux cleaned = -0.00965552 Jy
! Component: 3850  -  total flux cleaned = -0.00981807 Jy
! Component: 3900  -  total flux cleaned = -0.0099522 Jy
! Component: 3950  -  total flux cleaned = -0.0099253 Jy
! Component: 4000  -  total flux cleaned = -0.010005 Jy
! Component: 4050  -  total flux cleaned = -0.0101624 Jy
! Total flux subtracted in 4096 components = -0.0102404 Jy
! Clean residual min=-0.001742 max=0.001492 Jy/beam
! Clean residual mean=0.000003 rms=0.000462 Jy/beam
! Combined flux in latest and established models = 0.508254 Jy
keep
! Adding 252 model components to the UV plane model.
! The established model now contains 325 components and 0.508254 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2101+0341_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.43 x 7.976 at -1.904 degrees (North through East)
! Clean map  min=-0.0038463  max=0.45238 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2101+0341_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.452384 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000452425 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.300027 0.300027 0.600054 1.20011 2.40022 4.80044 9.60087 19.2017 38.4035 76.807
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0013 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.452 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2101+0341_S_uvs.log closed on Sun Oct  6 14:31:35 2013