! Started logfile: /g0/scr/pima/npcsc_uvs/J2042+7508_S_uvs.log on Sun Oct  6 14:31:21 2013
obs /g0/scr/pima/npcsc_uvs/J2042+7508_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J2042+7508_S_uva.fits
! AN table 1: 47 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.708967 visibilities/baseline/integration-bin.
! Found source: J2042+7508
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 3732 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J2042+7508_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 48 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003065Jy  sigma=0.732379
! Fit after  self-cal, rms=0.958225Jy  sigma=0.667422
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.731 mas, bmaj=11.08 mas, bpa=-4.049 degrees
! Estimated noise=30.1364 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0541633 Jy
! Component: 100  -  total flux cleaned = 0.0661967 Jy
! Total flux subtracted in 100 components = 0.0661967 Jy
! Clean residual min=-0.013963 max=0.010861 Jy/beam
! Clean residual mean=-0.000008 rms=0.004025 Jy/beam
! Combined flux in latest and established models = 0.0661967 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0661967 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079089Jy  sigma=0.071164
! Fit after  self-cal, rms=0.077800Jy  sigma=0.070503
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.453 mas, bmaj=12.52 mas, bpa=-3.553 degrees
! Estimated noise=18.3893 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00745562 Jy
! Component: 100  -  total flux cleaned = 0.01199 Jy
! Component: 150  -  total flux cleaned = 0.014864 Jy
! Component: 200  -  total flux cleaned = 0.016707 Jy
! Total flux subtracted in 200 components = 0.016707 Jy
! Clean residual min=-0.010477 max=0.006757 Jy/beam
! Clean residual mean=0.000002 rms=0.002443 Jy/beam
! Combined flux in latest and established models = 0.0829036 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 68 components and 0.0829037 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078710Jy  sigma=0.068893
! Fit after  self-cal, rms=0.078533Jy  sigma=0.068783
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.96     HN        1.00*    KP        1.05     
!   LA        0.84     NL        0.85     OV        1.00     PT        0.94     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.99     HN        1.00*    KP        0.98     
!   LA        0.75     NL        0.86     OV        0.92     PT        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.84     HN        1.00*    KP        0.99     
!   LA        0.63     NL        1.07     OV        0.96     PT        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.83     HN        1.00*    KP        0.94     
!   LA        0.52     NL        0.93     OV        0.72     PT        0.94     
! 
! 
! Fit before self-cal, rms=0.078533Jy  sigma=0.068783
! Fit after  self-cal, rms=0.066572Jy  sigma=0.063801
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=8.652 mas, bmaj=12.81 mas, bpa=-2.049 degrees
! Estimated noise=13.9382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0133519 Jy
! Component: 100  -  total flux cleaned = -0.0166823 Jy
! Component: 150  -  total flux cleaned = -0.0180896 Jy
! Component: 200  -  total flux cleaned = -0.0188817 Jy
! Total flux subtracted in 200 components = -0.0188817 Jy
! Clean residual min=-0.003147 max=0.003365 Jy/beam
! Clean residual mean=-0.000016 rms=0.000897 Jy/beam
! Combined flux in latest and established models = 0.0640219 Jy
! Performing phase self-cal
! Adding 41 model components to the UV plane model.
! The established model now contains 105 components and 0.0640219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059614Jy  sigma=0.066062
! Fit after  self-cal, rms=0.060029Jy  sigma=0.065784
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060029Jy  sigma=0.065784
! Fit after  self-cal, rms=0.051641Jy  sigma=0.063329
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.666 mas, bmaj=12.8 mas, bpa=-1.101 degrees
! Estimated noise=10.6609 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0100773 Jy
! Component: 100  -  total flux cleaned = -0.0124439 Jy
! Component: 150  -  total flux cleaned = -0.0134436 Jy
! Component: 200  -  total flux cleaned = -0.0140347 Jy
! Total flux subtracted in 200 components = -0.0140347 Jy
! Clean residual min=-0.002362 max=0.002384 Jy/beam
! Clean residual mean=-0.000012 rms=0.000683 Jy/beam
! Combined flux in latest and established models = 0.0499872 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 127 components and 0.0499872 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046499Jy  sigma=0.065568
! Fit after  self-cal, rms=0.046574Jy  sigma=0.065540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000176378 Jy
! Component: 100  -  total flux cleaned = -0.00024683 Jy
! Component: 150  -  total flux cleaned = -0.000329218 Jy
! Component: 200  -  total flux cleaned = -0.000370441 Jy
! Total flux subtracted in 200 components = -0.000370441 Jy
! Clean residual min=-0.002476 max=0.002466 Jy/beam
! Clean residual mean=-0.000010 rms=0.000689 Jy/beam
! Combined flux in latest and established models = 0.0496167 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 150 components and 0.0496167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046489Jy  sigma=0.065636
! Fit after  self-cal, rms=0.046485Jy  sigma=0.065634
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.046485Jy  sigma=0.065634
! Fit after  self-cal, rms=0.039218Jy  sigma=0.063247
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.613 mas, bmaj=12.73 mas, bpa=-0.4815 degrees
! Estimated noise=8.06414 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00760077 Jy
! Component: 100  -  total flux cleaned = -0.00938523 Jy
! Component: 150  -  total flux cleaned = -0.0101823 Jy
! Component: 200  -  total flux cleaned = -0.0106654 Jy
! Total flux subtracted in 200 components = -0.0106654 Jy
! Clean residual min=-0.001780 max=0.001793 Jy/beam
! Clean residual mean=-0.000009 rms=0.000504 Jy/beam
! Combined flux in latest and established models = 0.0389513 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 171 components and 0.0389513 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035351Jy  sigma=0.065467
! Fit after  self-cal, rms=0.035358Jy  sigma=0.065459
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000323592 Jy
! Component: 100  -  total flux cleaned = -0.000433088 Jy
! Component: 150  -  total flux cleaned = -0.000453654 Jy
! Component: 200  -  total flux cleaned = -0.000471327 Jy
! Total flux subtracted in 200 components = -0.000471327 Jy
! Clean residual min=-0.001864 max=0.001768 Jy/beam
! Clean residual mean=-0.000008 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.03848 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 180 components and 0.03848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035294Jy  sigma=0.065565
! Fit after  self-cal, rms=0.035292Jy  sigma=0.065564
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.035292Jy  sigma=0.065564
! Fit after  self-cal, rms=0.029748Jy  sigma=0.063198
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.828 mas, bmaj=13.79 mas, bpa=3.679 degrees
! Estimated noise=6.20783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00591755 Jy
! Component: 100  -  total flux cleaned = -0.00731567 Jy
! Component: 150  -  total flux cleaned = -0.00792827 Jy
! Component: 200  -  total flux cleaned = -0.00826677 Jy
! Total flux subtracted in 200 components = -0.00826677 Jy
! Clean residual min=-0.001327 max=0.001344 Jy/beam
! Clean residual mean=-0.000009 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0302132 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 204 components and 0.0302132 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026795Jy  sigma=0.065480
! Fit after  self-cal, rms=0.026792Jy  sigma=0.065466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190413 Jy
! Component: 100  -  total flux cleaned = -0.000294357 Jy
! Component: 150  -  total flux cleaned = -0.000310838 Jy
! Component: 200  -  total flux cleaned = -0.000316705 Jy
! Total flux subtracted in 200 components = -0.000316705 Jy
! Clean residual min=-0.001343 max=0.001292 Jy/beam
! Clean residual mean=-0.000008 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0298965 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 218 components and 0.0298965 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026762Jy  sigma=0.065535
! Fit after  self-cal, rms=0.026760Jy  sigma=0.065534
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=8.558 mas, bmaj=12.66 mas, bpa=0.08816 degrees
! Estimated noise=6.10022 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.558 x 12.66 at 0.08816 degrees (North through East)
! Clean map  min=-0.0014177  max=0.023066 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.761 mas, bmaj=11.24 mas, bpa=2.805 degrees
! Estimated noise=9.50561 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170653 Jy
! Component: 100  -  total flux cleaned = 0.0214105 Jy
! Component: 150  -  total flux cleaned = 0.0236968 Jy
! Component: 200  -  total flux cleaned = 0.0251425 Jy
! Total flux subtracted in 200 components = 0.0251425 Jy
! Clean residual min=-0.002468 max=0.001817 Jy/beam
! Clean residual mean=0.000000 rms=0.000559 Jy/beam
! Combined flux in latest and established models = 0.0251425 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.0251425 Jy
! Inverting map and beam 
! Estimated beam: bmin=8.558 mas, bmaj=12.66 mas, bpa=0.08816 degrees
! Estimated noise=6.10022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00203735 Jy
! Component: 100  -  total flux cleaned = 0.00314219 Jy
! Component: 150  -  total flux cleaned = 0.00384133 Jy
! Component: 200  -  total flux cleaned = 0.00404472 Jy
! Total flux subtracted in 200 components = 0.00404472 Jy
! Clean residual min=-0.001430 max=0.001644 Jy/beam
! Clean residual mean=-0.000005 rms=0.000409 Jy/beam
! Combined flux in latest and established models = 0.0291872 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 62 components and 0.0291872 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.828 mas, bmaj=13.79 mas, bpa=3.679 degrees
! Estimated noise=6.20783 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357886 Jy
! Component: 100  -  total flux cleaned = 0.000449278 Jy
! Component: 150  -  total flux cleaned = 0.000506051 Jy
! Component: 200  -  total flux cleaned = 0.000536433 Jy
! Total flux subtracted in 200 components = 0.000536433 Jy
! Clean residual min=-0.001376 max=0.001416 Jy/beam
! Clean residual mean=-0.000008 rms=0.000415 Jy/beam
! Combined flux in latest and established models = 0.0297236 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.90463e-05 Jy
! Component: 100  -  total flux cleaned = 3.72561e-05 Jy
! Component: 150  -  total flux cleaned = 5.41239e-05 Jy
! Component: 200  -  total flux cleaned = 6.22609e-05 Jy
! Total flux subtracted in 200 components = 6.22609e-05 Jy
! Clean residual min=-0.001363 max=0.001367 Jy/beam
! Clean residual mean=-0.000008 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0297859 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 75 components and 0.0297859 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=8.558 mas, bmaj=12.66 mas, bpa=0.08816 degrees
! Estimated noise=6.10022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.54593e-05 Jy
! Component: 100  -  total flux cleaned = -9.58163e-05 Jy
! Component: 150  -  total flux cleaned = -8.6884e-05 Jy
! Component: 200  -  total flux cleaned = -8.66941e-05 Jy
! Total flux subtracted in 200 components = -8.66941e-05 Jy
! Clean residual min=-0.001360 max=0.001405 Jy/beam
! Clean residual mean=-0.000006 rms=0.000386 Jy/beam
! Combined flux in latest and established models = 0.0296992 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 84 components and 0.0296992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.026756Jy  sigma=0.065569
! Fit after  self-cal, rms=0.026757Jy  sigma=0.065563
wmodel /g0/scr/pima/npcsc_uvs/J2042+7508_S_map.mod
! Writing 84 model components to file: /g0/scr/pima/npcsc_uvs/J2042+7508_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J2042+7508_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J2042+7508_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J2042+7508_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J2042+7508_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -1.03688e-05 Jy
! Component: 100  -  total flux cleaned = -0.000180164 Jy
! Component: 150  -  total flux cleaned = -0.000237018 Jy
! Component: 200  -  total flux cleaned = -0.000323144 Jy
! Component: 250  -  total flux cleaned = -0.000404532 Jy
! Component: 300  -  total flux cleaned = -0.000540969 Jy
! Component: 350  -  total flux cleaned = -0.000626855 Jy
! Component: 400  -  total flux cleaned = -0.000694348 Jy
! Component: 450  -  total flux cleaned = -0.00078427 Jy
! Component: 500  -  total flux cleaned = -0.000869778 Jy
! Component: 550  -  total flux cleaned = -0.000975646 Jy
! Component: 600  -  total flux cleaned = -0.00104383 Jy
! Component: 650  -  total flux cleaned = -0.00112058 Jy
! Component: 700  -  total flux cleaned = -0.00117346 Jy
! Component: 750  -  total flux cleaned = -0.00121445 Jy
! Component: 800  -  total flux cleaned = -0.0012636 Jy
! Component: 850  -  total flux cleaned = -0.00126381 Jy
! Component: 900  -  total flux cleaned = -0.00124542 Jy
! Component: 950  -  total flux cleaned = -0.00121838 Jy
! Component: 1000  -  total flux cleaned = -0.00119198 Jy
! Component: 1050  -  total flux cleaned = -0.00114929 Jy
! Component: 1100  -  total flux cleaned = -0.00113273 Jy
! Component: 1150  -  total flux cleaned = -0.00108374 Jy
! Component: 1200  -  total flux cleaned = -0.00105967 Jy
! Component: 1250  -  total flux cleaned = -0.000996721 Jy
! Component: 1300  -  total flux cleaned = -0.000950226 Jy
! Component: 1350  -  total flux cleaned = -0.000889162 Jy
! Component: 1400  -  total flux cleaned = -0.000836454 Jy
! Component: 1450  -  total flux cleaned = -0.00076965 Jy
! Component: 1500  -  total flux cleaned = -0.00070373 Jy
! Component: 1550  -  total flux cleaned = -0.000645812 Jy
! Component: 1600  -  total flux cleaned = -0.000567167 Jy
! Component: 1650  -  total flux cleaned = -0.00051067 Jy
! Component: 1700  -  total flux cleaned = -0.000454694 Jy
! Component: 1750  -  total flux cleaned = -0.000392322 Jy
! Component: 1800  -  total flux cleaned = -0.000344208 Jy
! Component: 1850  -  total flux cleaned = -0.000289611 Jy
! Component: 1900  -  total flux cleaned = -0.00022191 Jy
! Component: 1950  -  total flux cleaned = -0.000174897 Jy
! Component: 2000  -  total flux cleaned = -0.000134812 Jy
! Component: 2050  -  total flux cleaned = -7.49599e-05 Jy
! Component: 2100  -  total flux cleaned = -3.52934e-05 Jy
! Component: 2150  -  total flux cleaned = 1.07732e-05 Jy
! Component: 2200  -  total flux cleaned = 5.00745e-05 Jy
! Component: 2250  -  total flux cleaned = 0.000102159 Jy
! Component: 2300  -  total flux cleaned = 0.000147511 Jy
! Component: 2350  -  total flux cleaned = 0.00018623 Jy
! Component: 2400  -  total flux cleaned = 0.000231227 Jy
! Component: 2450  -  total flux cleaned = 0.000276084 Jy
! Component: 2500  -  total flux cleaned = 0.000301704 Jy
! Component: 2550  -  total flux cleaned = 0.000327227 Jy
! Component: 2600  -  total flux cleaned = 0.000339972 Jy
! Component: 2650  -  total flux cleaned = 0.000352721 Jy
! Component: 2700  -  total flux cleaned = 0.000365507 Jy
! Component: 2750  -  total flux cleaned = 0.000378288 Jy
! Component: 2800  -  total flux cleaned = 0.000384663 Jy
! Component: 2850  -  total flux cleaned = 0.00038464 Jy
! Component: 2900  -  total flux cleaned = 0.000384621 Jy
! Component: 2950  -  total flux cleaned = 0.000397448 Jy
! Component: 3000  -  total flux cleaned = 0.00040381 Jy
! Component: 3050  -  total flux cleaned = 0.000397363 Jy
! Component: 3100  -  total flux cleaned = 0.000416763 Jy
! Component: 3150  -  total flux cleaned = 0.000416725 Jy
! Component: 3200  -  total flux cleaned = 0.000416714 Jy
! Component: 3250  -  total flux cleaned = 0.000429674 Jy
! Component: 3300  -  total flux cleaned = 0.000449157 Jy
! Component: 3350  -  total flux cleaned = 0.000442611 Jy
! Component: 3400  -  total flux cleaned = 0.000449089 Jy
! Component: 3450  -  total flux cleaned = 0.000462187 Jy
! Component: 3500  -  total flux cleaned = 0.000455569 Jy
! Component: 3550  -  total flux cleaned = 0.000475316 Jy
! Component: 3600  -  total flux cleaned = 0.000481935 Jy
! Component: 3650  -  total flux cleaned = 0.000495232 Jy
! Component: 3700  -  total flux cleaned = 0.000521869 Jy
! Component: 3750  -  total flux cleaned = 0.000515218 Jy
! Component: 3800  -  total flux cleaned = 0.000542058 Jy
! Component: 3850  -  total flux cleaned = 0.000555539 Jy
! Component: 3900  -  total flux cleaned = 0.000575785 Jy
! Component: 3950  -  total flux cleaned = 0.000589389 Jy
! Component: 4000  -  total flux cleaned = 0.000602997 Jy
! Component: 4050  -  total flux cleaned = 0.000603027 Jy
! Total flux subtracted in 4096 components = 0.000603039 Jy
! Clean residual min=-0.000445 max=0.000378 Jy/beam
! Clean residual mean=-0.000001 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0303022 Jy
keep
! Adding 322 model components to the UV plane model.
! The established model now contains 406 components and 0.0303022 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J2042+7508_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 8.558 x 12.66 at 0.08816 degrees (North through East)
! Clean map  min=-0.001251  max=0.022714 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J2042+7508_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0227143 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000145215 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.91793 1.91793 3.83586 7.67173 15.3435 30.6869 61.3738
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.022 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J2042+7508_S_uvs.log closed on Sun Oct  6 14:31:25 2013