! Started logfile: /g0/scr/pima/npcsc_uvs/J1842+7946_X_uvs.log on Sun Oct 6 14:26:43 2013 obs /g0/scr/pima/npcsc_uvs/J1842+7946_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.722222 visibilities/baseline/integration-bin. ! Found source: J1842+7946 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 4784 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1842+7946_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 46 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.003731Jy sigma=0.798688 ! Fit after self-cal, rms=0.960104Jy sigma=0.722068 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.225 mas, bmaj=2.775 mas, bpa=-18.77 degrees ! Estimated noise=33.2495 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0503301 Jy ! Component: 100 - total flux cleaned = 0.0657305 Jy ! Total flux subtracted in 100 components = 0.0657305 Jy ! Clean residual min=-0.016139 max=0.014182 Jy/beam ! Clean residual mean=0.000005 rms=0.004495 Jy/beam ! Combined flux in latest and established models = 0.0657305 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.0657305 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089644Jy sigma=0.088784 ! Fit after self-cal, rms=0.088331Jy sigma=0.087696 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.68 mas, bmaj=3.04 mas, bpa=-14.95 degrees ! Estimated noise=15.0428 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125755 Jy ! Component: 100 - total flux cleaned = 0.0189456 Jy ! Component: 150 - total flux cleaned = 0.0231231 Jy ! Component: 200 - total flux cleaned = 0.0258876 Jy ! Total flux subtracted in 200 components = 0.0258876 Jy ! Clean residual min=-0.011918 max=0.011928 Jy/beam ! Clean residual mean=0.000029 rms=0.005427 Jy/beam ! Combined flux in latest and established models = 0.0916181 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 23 components and 0.091618 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091208Jy sigma=0.083064 ! Fit after self-cal, rms=0.090960Jy sigma=0.082943 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.70 HN 0.63 KP 1.09 ! LA 0.74 NL 1.05 OV 1.21 PT 1.05 ! SC 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.64 HN 0.66 KP 1.03 ! LA 0.72 NL 0.94 OV 1.05 PT 1.24 ! SC 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.94 FD 0.72 HN 0.76 KP 0.94 ! LA 0.72 NL 1.04 OV 1.21 PT 1.05 ! SC 1.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.79 HN 0.65 KP 0.94 ! LA 0.62 NL 0.78 OV 1.09 PT 1.09 ! SC 1.00* ! ! ! Fit before self-cal, rms=0.090960Jy sigma=0.082943 ! Fit after self-cal, rms=0.079525Jy sigma=0.076311 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.674 mas, bmaj=3.043 mas, bpa=-15.98 degrees ! Estimated noise=11.6132 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0129172 Jy ! Component: 100 - total flux cleaned = -0.0167648 Jy ! Component: 150 - total flux cleaned = -0.0186989 Jy ! Component: 200 - total flux cleaned = -0.0199252 Jy ! Total flux subtracted in 200 components = -0.0199252 Jy ! Clean residual min=-0.005330 max=0.009922 Jy/beam ! Clean residual mean=0.000020 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 0.0716929 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 37 components and 0.0716929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073693Jy sigma=0.078523 ! Fit after self-cal, rms=0.074421Jy sigma=0.078146 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074421Jy sigma=0.078146 ! Fit after self-cal, rms=0.064557Jy sigma=0.075729 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.646 mas, bmaj=3.065 mas, bpa=-16.66 degrees ! Estimated noise=9.1939 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00998422 Jy ! Component: 100 - total flux cleaned = -0.0127274 Jy ! Component: 150 - total flux cleaned = -0.0141237 Jy ! Component: 200 - total flux cleaned = -0.0150082 Jy ! Total flux subtracted in 200 components = -0.0150082 Jy ! Clean residual min=-0.004133 max=0.006945 Jy/beam ! Clean residual mean=0.000014 rms=0.001718 Jy/beam ! Combined flux in latest and established models = 0.0566847 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.0566846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060195Jy sigma=0.077944 ! Fit after self-cal, rms=0.060273Jy sigma=0.077911 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000617211 Jy ! Component: 100 - total flux cleaned = -0.000904141 Jy ! Component: 150 - total flux cleaned = -0.000983494 Jy ! Component: 200 - total flux cleaned = -0.00102809 Jy ! Total flux subtracted in 200 components = -0.00102809 Jy ! Clean residual min=-0.004290 max=0.006755 Jy/beam ! Clean residual mean=0.000013 rms=0.001773 Jy/beam ! Combined flux in latest and established models = 0.0556566 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 62 components and 0.0556566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060162Jy sigma=0.078098 ! Fit after self-cal, rms=0.060157Jy sigma=0.078095 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060157Jy sigma=0.078095 ! Fit after self-cal, rms=0.050684Jy sigma=0.075661 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.627 mas, bmaj=3.087 mas, bpa=-17.03 degrees ! Estimated noise=7.17462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00768968 Jy ! Component: 100 - total flux cleaned = -0.00979088 Jy ! Component: 150 - total flux cleaned = -0.0108719 Jy ! Component: 200 - total flux cleaned = -0.0115576 Jy ! Total flux subtracted in 200 components = -0.0115576 Jy ! Clean residual min=-0.003262 max=0.005285 Jy/beam ! Clean residual mean=0.000011 rms=0.001325 Jy/beam ! Combined flux in latest and established models = 0.0440989 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 77 components and 0.0440989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047361Jy sigma=0.077872 ! Fit after self-cal, rms=0.047393Jy sigma=0.077864 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00044944 Jy ! Component: 100 - total flux cleaned = -0.000623574 Jy ! Component: 150 - total flux cleaned = -0.000692641 Jy ! Component: 200 - total flux cleaned = -0.000746154 Jy ! Total flux subtracted in 200 components = -0.000746154 Jy ! Clean residual min=-0.003359 max=0.005193 Jy/beam ! Clean residual mean=0.000010 rms=0.001357 Jy/beam ! Combined flux in latest and established models = 0.0433528 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 88 components and 0.0433528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047315Jy sigma=0.078037 ! Fit after self-cal, rms=0.047310Jy sigma=0.078032 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.047310Jy sigma=0.078032 ! Fit after self-cal, rms=0.039665Jy sigma=0.075633 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=3.479 mas, bpa=-0.2659 degrees ! Estimated noise=5.89747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00637638 Jy ! Component: 100 - total flux cleaned = -0.00791585 Jy ! Component: 150 - total flux cleaned = -0.00861409 Jy ! Component: 200 - total flux cleaned = -0.00900954 Jy ! Total flux subtracted in 200 components = -0.00900954 Jy ! Clean residual min=-0.003172 max=0.005033 Jy/beam ! Clean residual mean=0.000013 rms=0.001397 Jy/beam ! Combined flux in latest and established models = 0.0343432 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 105 components and 0.0343432 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037081Jy sigma=0.077902 ! Fit after self-cal, rms=0.037083Jy sigma=0.077880 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000224444 Jy ! Component: 100 - total flux cleaned = -0.000267615 Jy ! Component: 150 - total flux cleaned = -0.000273961 Jy ! Component: 200 - total flux cleaned = -0.000286045 Jy ! Total flux subtracted in 200 components = -0.000286045 Jy ! Clean residual min=-0.003199 max=0.004975 Jy/beam ! Clean residual mean=0.000012 rms=0.001411 Jy/beam ! Combined flux in latest and established models = 0.0340572 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 110 components and 0.0340572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037070Jy sigma=0.077936 ! Fit after self-cal, rms=0.037065Jy sigma=0.077935 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.612 mas, bmaj=3.109 mas, bpa=-17.31 degrees ! Estimated noise=5.59274 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.612 x 3.109 at -17.31 degrees (North through East) ! Clean map min=-0.0026095 max=0.023698 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.159 mas, bmaj=2.86 mas, bpa=-20.2 degrees ! Estimated noise=12.0435 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0183915 Jy ! Component: 100 - total flux cleaned = 0.0245816 Jy ! Component: 150 - total flux cleaned = 0.0279106 Jy ! Component: 200 - total flux cleaned = 0.0297435 Jy ! Total flux subtracted in 200 components = 0.0297435 Jy ! Clean residual min=-0.005233 max=0.005063 Jy/beam ! Clean residual mean=0.000002 rms=0.001351 Jy/beam ! Combined flux in latest and established models = 0.0297435 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.0297435 Jy ! Inverting map and beam ! Estimated beam: bmin=1.612 mas, bmaj=3.109 mas, bpa=-17.31 degrees ! Estimated noise=5.59274 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00193657 Jy ! Component: 100 - total flux cleaned = 0.00225817 Jy ! Component: 150 - total flux cleaned = 0.00253613 Jy ! Component: 200 - total flux cleaned = 0.00279929 Jy ! Total flux subtracted in 200 components = 0.00279929 Jy ! Clean residual min=-0.002803 max=0.003973 Jy/beam ! Clean residual mean=0.000007 rms=0.001100 Jy/beam ! Combined flux in latest and established models = 0.0325428 Jy ! Adding 16 model components to the UV plane model. ! The established model now contains 26 components and 0.0325428 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.619 mas, bmaj=3.479 mas, bpa=-0.2659 degrees ! Estimated noise=5.89747 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000691404 Jy ! Component: 100 - total flux cleaned = 0.000738108 Jy ! Component: 150 - total flux cleaned = 0.000738551 Jy ! Component: 200 - total flux cleaned = 0.00075638 Jy ! Total flux subtracted in 200 components = 0.00075638 Jy ! Clean residual min=-0.003165 max=0.005083 Jy/beam ! Clean residual mean=0.000011 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.0332991 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.44368e-07 Jy ! Component: 100 - total flux cleaned = 4.09011e-07 Jy ! Component: 150 - total flux cleaned = 2.05912e-06 Jy ! Component: 200 - total flux cleaned = 1.43878e-05 Jy ! Total flux subtracted in 200 components = 1.43878e-05 Jy ! Clean residual min=-0.003231 max=0.005052 Jy/beam ! Clean residual mean=0.000011 rms=0.001439 Jy/beam ! Combined flux in latest and established models = 0.0333135 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 37 components and 0.0333135 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.612 mas, bmaj=3.109 mas, bpa=-17.31 degrees ! Estimated noise=5.59274 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000180112 Jy ! Component: 100 - total flux cleaned = -0.000251604 Jy ! Component: 150 - total flux cleaned = -0.000287451 Jy ! Component: 200 - total flux cleaned = -0.000309804 Jy ! Total flux subtracted in 200 components = -0.000309804 Jy ! Clean residual min=-0.002737 max=0.003913 Jy/beam ! Clean residual mean=0.000007 rms=0.001061 Jy/beam ! Combined flux in latest and established models = 0.0330037 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 0.0330037 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.037057Jy sigma=0.078130 ! Fit after self-cal, rms=0.037051Jy sigma=0.078119 wmodel /g0/scr/pima/npcsc_uvs/J1842+7946_X_map.mod ! Writing 50 model components to file: /g0/scr/pima/npcsc_uvs/J1842+7946_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J1842+7946_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J1842+7946_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1842+7946_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169696 Jy ! Component: 100 - total flux cleaned = 0.00285146 Jy ! Component: 150 - total flux cleaned = 0.00340028 Jy ! Component: 200 - total flux cleaned = 0.00362027 Jy ! Component: 250 - total flux cleaned = 0.00378176 Jy ! Component: 300 - total flux cleaned = 0.00375146 Jy ! Component: 350 - total flux cleaned = 0.00372544 Jy ! Component: 400 - total flux cleaned = 0.00362922 Jy ! Component: 450 - total flux cleaned = 0.00354152 Jy ! Component: 500 - total flux cleaned = 0.00347849 Jy ! Component: 550 - total flux cleaned = 0.00343887 Jy ! Component: 600 - total flux cleaned = 0.00347626 Jy ! Component: 650 - total flux cleaned = 0.00347635 Jy ! Component: 700 - total flux cleaned = 0.00349381 Jy ! Component: 750 - total flux cleaned = 0.0034767 Jy ! Component: 800 - total flux cleaned = 0.00349329 Jy ! Component: 850 - total flux cleaned = 0.00352589 Jy ! Component: 900 - total flux cleaned = 0.00363502 Jy ! Component: 950 - total flux cleaned = 0.00368051 Jy ! Component: 1000 - total flux cleaned = 0.00372511 Jy ! Component: 1050 - total flux cleaned = 0.00375387 Jy ! Component: 1100 - total flux cleaned = 0.00372557 Jy ! Component: 1150 - total flux cleaned = 0.00373977 Jy ! Component: 1200 - total flux cleaned = 0.0037948 Jy ! Component: 1250 - total flux cleaned = 0.00380822 Jy ! Component: 1300 - total flux cleaned = 0.0038217 Jy ! Component: 1350 - total flux cleaned = 0.00379563 Jy ! Component: 1400 - total flux cleaned = 0.00379573 Jy ! Component: 1450 - total flux cleaned = 0.00384635 Jy ! Component: 1500 - total flux cleaned = 0.00383393 Jy ! Component: 1550 - total flux cleaned = 0.00389534 Jy ! Component: 1600 - total flux cleaned = 0.00390738 Jy ! Component: 1650 - total flux cleaned = 0.00393135 Jy ! Component: 1700 - total flux cleaned = 0.00396694 Jy ! Component: 1750 - total flux cleaned = 0.00401372 Jy ! Component: 1800 - total flux cleaned = 0.0040483 Jy ! Component: 1850 - total flux cleaned = 0.00408239 Jy ! Component: 1900 - total flux cleaned = 0.00408242 Jy ! Component: 1950 - total flux cleaned = 0.00413839 Jy ! Component: 2000 - total flux cleaned = 0.00416036 Jy ! Component: 2050 - total flux cleaned = 0.00419325 Jy ! Component: 2100 - total flux cleaned = 0.00421491 Jy ! Component: 2150 - total flux cleaned = 0.00422566 Jy ! Component: 2200 - total flux cleaned = 0.00421507 Jy ! Component: 2250 - total flux cleaned = 0.00424685 Jy ! Component: 2300 - total flux cleaned = 0.00427831 Jy ! Component: 2350 - total flux cleaned = 0.00426783 Jy ! Component: 2400 - total flux cleaned = 0.00425755 Jy ! Component: 2450 - total flux cleaned = 0.00429847 Jy ! Component: 2500 - total flux cleaned = 0.00427802 Jy ! Component: 2550 - total flux cleaned = 0.00426792 Jy ! Component: 2600 - total flux cleaned = 0.00424789 Jy ! Component: 2650 - total flux cleaned = 0.00422796 Jy ! Component: 2700 - total flux cleaned = 0.00420826 Jy ! Component: 2750 - total flux cleaned = 0.00416906 Jy ! Component: 2800 - total flux cleaned = 0.00415937 Jy ! Component: 2850 - total flux cleaned = 0.00411102 Jy ! Component: 2900 - total flux cleaned = 0.00409183 Jy ! Component: 2950 - total flux cleaned = 0.00409185 Jy ! Component: 3000 - total flux cleaned = 0.00405387 Jy ! Component: 3050 - total flux cleaned = 0.00402561 Jy ! Component: 3100 - total flux cleaned = 0.00400688 Jy ! Component: 3150 - total flux cleaned = 0.00397894 Jy ! Component: 3200 - total flux cleaned = 0.00394186 Jy ! Component: 3250 - total flux cleaned = 0.00393257 Jy ! Component: 3300 - total flux cleaned = 0.00391419 Jy ! Component: 3350 - total flux cleaned = 0.00391409 Jy ! Component: 3400 - total flux cleaned = 0.00391404 Jy ! Component: 3450 - total flux cleaned = 0.0038868 Jy ! Component: 3500 - total flux cleaned = 0.00386873 Jy ! Component: 3550 - total flux cleaned = 0.00387775 Jy ! Component: 3600 - total flux cleaned = 0.00385982 Jy ! Component: 3650 - total flux cleaned = 0.00385098 Jy ! Component: 3700 - total flux cleaned = 0.00387776 Jy ! Component: 3750 - total flux cleaned = 0.00385103 Jy ! Component: 3800 - total flux cleaned = 0.0038422 Jy ! Component: 3850 - total flux cleaned = 0.00385109 Jy ! Component: 3900 - total flux cleaned = 0.00384226 Jy ! Component: 3950 - total flux cleaned = 0.00383344 Jy ! Component: 4000 - total flux cleaned = 0.00380706 Jy ! Component: 4050 - total flux cleaned = 0.00380713 Jy ! Total flux subtracted in 4096 components = 0.00380715 Jy ! Clean residual min=-0.000501 max=0.000459 Jy/beam ! Clean residual mean=-0.000001 rms=0.000155 Jy/beam ! Combined flux in latest and established models = 0.0368109 Jy keep ! Adding 298 model components to the UV plane model. ! The established model now contains 348 components and 0.0368109 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J1842+7946_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.612 x 3.109 at -17.31 degrees (North through East) ! Clean map min=-0.0011329 max=0.024043 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0240426 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000153015 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.90929 1.90929 3.81858 7.63717 15.2743 30.5487 61.0974 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0004 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.024 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J1842+7946_X_uvs.log closed on Sun Oct 6 14:26:47 2013