! Started logfile: /g0/scr/pima/npcsc_uvs/J1842+7946_S_uvs.log on Sun Oct  6 14:31:04 2013
obs /g0/scr/pima/npcsc_uvs/J1842+7946_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.911111 visibilities/baseline/integration-bin.
! Found source: J1842+7946
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7544 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1842+7946_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.006815Jy  sigma=0.852676
! Fit after  self-cal, rms=0.954713Jy  sigma=0.747780
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.789 mas, bmaj=9.535 mas, bpa=1.884 degrees
! Estimated noise=23.8585 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0527822 Jy
! Component: 100  -  total flux cleaned = 0.0678597 Jy
! Total flux subtracted in 100 components = 0.0678597 Jy
! Clean residual min=-0.010673 max=0.011942 Jy/beam
! Clean residual mean=0.000010 rms=0.003242 Jy/beam
! Combined flux in latest and established models = 0.0678597 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0678597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.108567Jy  sigma=0.119563
! Fit after  self-cal, rms=0.107486Jy  sigma=0.118605
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.666 mas, bmaj=10.63 mas, bpa=1.026 degrees
! Estimated noise=11.1566 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0255364 Jy
! Component: 100  -  total flux cleaned = 0.0404361 Jy
! Component: 150  -  total flux cleaned = 0.0500275 Jy
! Component: 200  -  total flux cleaned = 0.0564013 Jy
! Total flux subtracted in 200 components = 0.0564013 Jy
! Clean residual min=-0.013414 max=0.018926 Jy/beam
! Clean residual mean=0.000021 rms=0.005351 Jy/beam
! Combined flux in latest and established models = 0.124261 Jy
! Performing phase self-cal
! Adding 62 model components to the UV plane model.
! The established model now contains 70 components and 0.124261 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.109661Jy  sigma=0.107236
! Fit after  self-cal, rms=0.109317Jy  sigma=0.106930
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.81     HN        0.82     KP        1.02     
!   LA        0.80     MK        0.90     NL        0.90     OV        1.10     
!   PT        0.88     SC        0.65     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.77     HN        0.86     KP        0.97     
!   LA        0.71     MK        0.97     NL        1.18     OV        1.15     
!   PT        0.91     SC        0.73     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.77     HN        0.92     KP        1.03     
!   LA        0.62     MK        1.02     NL        1.05     OV        1.11     
!   PT        1.00     SC        0.65     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.82     HN        0.79     KP        0.99     
!   LA        0.52     MK        0.86     NL        0.90     OV        1.26     
!   PT        0.80     SC        0.68     
! 
! 
! Fit before self-cal, rms=0.109317Jy  sigma=0.106930
! Fit after  self-cal, rms=0.092261Jy  sigma=0.097790
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.652 mas, bmaj=10.65 mas, bpa=0.7249 degrees
! Estimated noise=8.35502 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0151603 Jy
! Component: 100  -  total flux cleaned = -0.0190917 Jy
! Component: 150  -  total flux cleaned = -0.0208059 Jy
! Component: 200  -  total flux cleaned = -0.0218312 Jy
! Total flux subtracted in 200 components = -0.0218312 Jy
! Clean residual min=-0.006772 max=0.010425 Jy/beam
! Clean residual mean=0.000002 rms=0.002631 Jy/beam
! Combined flux in latest and established models = 0.10243 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 101 components and 0.10243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085464Jy  sigma=0.100464
! Fit after  self-cal, rms=0.085807Jy  sigma=0.100101
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085807Jy  sigma=0.100101
! Fit after  self-cal, rms=0.072859Jy  sigma=0.097295
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.586 mas, bmaj=10.56 mas, bpa=0.7946 degrees
! Estimated noise=6.50368 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0112456 Jy
! Component: 100  -  total flux cleaned = -0.0145425 Jy
! Component: 150  -  total flux cleaned = -0.0164101 Jy
! Component: 200  -  total flux cleaned = -0.0175879 Jy
! Total flux subtracted in 200 components = -0.0175879 Jy
! Clean residual min=-0.005288 max=0.007828 Jy/beam
! Clean residual mean=0.000002 rms=0.001977 Jy/beam
! Combined flux in latest and established models = 0.084842 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 124 components and 0.084842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067885Jy  sigma=0.099853
! Fit after  self-cal, rms=0.067916Jy  sigma=0.099835
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000870356 Jy
! Component: 100  -  total flux cleaned = -0.0011085 Jy
! Component: 150  -  total flux cleaned = -0.00120869 Jy
! Component: 200  -  total flux cleaned = -0.00126597 Jy
! Total flux subtracted in 200 components = -0.00126597 Jy
! Clean residual min=-0.005378 max=0.007836 Jy/beam
! Clean residual mean=0.000002 rms=0.002000 Jy/beam
! Combined flux in latest and established models = 0.083576 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.083576 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067767Jy  sigma=0.100039
! Fit after  self-cal, rms=0.067767Jy  sigma=0.100036
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.067767Jy  sigma=0.100036
! Fit after  self-cal, rms=0.056980Jy  sigma=0.097310
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.531 mas, bmaj=10.51 mas, bpa=1.041 degrees
! Estimated noise=5.06035 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00854617 Jy
! Component: 100  -  total flux cleaned = -0.0114666 Jy
! Component: 150  -  total flux cleaned = -0.0131696 Jy
! Component: 200  -  total flux cleaned = -0.0142411 Jy
! Total flux subtracted in 200 components = -0.0142411 Jy
! Clean residual min=-0.004094 max=0.006114 Jy/beam
! Clean residual mean=0.000001 rms=0.001530 Jy/beam
! Combined flux in latest and established models = 0.0693349 Jy
selfcal
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 154 components and 0.0693349 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053184Jy  sigma=0.099773
! Fit after  self-cal, rms=0.053172Jy  sigma=0.099762
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000746538 Jy
! Component: 100  -  total flux cleaned = -0.0011182 Jy
! Component: 150  -  total flux cleaned = -0.00122666 Jy
! Component: 200  -  total flux cleaned = -0.00124777 Jy
! Total flux subtracted in 200 components = -0.00124777 Jy
! Clean residual min=-0.004194 max=0.006071 Jy/beam
! Clean residual mean=0.000002 rms=0.001555 Jy/beam
! Combined flux in latest and established models = 0.0680871 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 158 components and 0.0680871 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053028Jy  sigma=0.100010
! Fit after  self-cal, rms=0.053031Jy  sigma=0.100006
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053031Jy  sigma=0.100006
! Fit after  self-cal, rms=0.044713Jy  sigma=0.097320
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.653 mas, bmaj=12.51 mas, bpa=0.5781 degrees
! Estimated noise=4.69343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00774701 Jy
! Component: 100  -  total flux cleaned = -0.0099733 Jy
! Component: 150  -  total flux cleaned = -0.0109137 Jy
! Component: 200  -  total flux cleaned = -0.0110844 Jy
! Total flux subtracted in 200 components = -0.0110844 Jy
! Clean residual min=-0.004849 max=0.008322 Jy/beam
! Clean residual mean=0.000002 rms=0.002158 Jy/beam
! Combined flux in latest and established models = 0.0570027 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 179 components and 0.0570027 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041689Jy  sigma=0.100274
! Fit after  self-cal, rms=0.041582Jy  sigma=0.100086
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131911 Jy
! Component: 100  -  total flux cleaned = 8.08048e-05 Jy
! Component: 150  -  total flux cleaned = 6.58723e-05 Jy
! Component: 200  -  total flux cleaned = 8.07981e-05 Jy
! Total flux subtracted in 200 components = 8.07981e-05 Jy
! Clean residual min=-0.004820 max=0.008177 Jy/beam
! Clean residual mean=0.000002 rms=0.002144 Jy/beam
! Combined flux in latest and established models = 0.0570835 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 188 components and 0.0570835 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041571Jy  sigma=0.100168
! Fit after  self-cal, rms=0.041533Jy  sigma=0.100140
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=10.48 mas, bpa=1.381 degrees
! Estimated noise=3.94596 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.479 x 10.48 at 1.381 degrees (North through East)
! Clean map  min=-0.0031464  max=0.028849 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.695 mas, bmaj=9.58 mas, bpa=2.205 degrees
! Estimated noise=8.01977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0165984 Jy
! Component: 100  -  total flux cleaned = 0.0242329 Jy
! Component: 150  -  total flux cleaned = 0.0297942 Jy
! Component: 200  -  total flux cleaned = 0.0340146 Jy
! Total flux subtracted in 200 components = 0.0340146 Jy
! Clean residual min=-0.004230 max=0.003643 Jy/beam
! Clean residual mean=0.000002 rms=0.001006 Jy/beam
! Combined flux in latest and established models = 0.0340146 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0340146 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=10.48 mas, bpa=1.381 degrees
! Estimated noise=3.94596 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.008179 Jy
! Component: 100  -  total flux cleaned = 0.0125949 Jy
! Component: 150  -  total flux cleaned = 0.0154659 Jy
! Component: 200  -  total flux cleaned = 0.0173895 Jy
! Total flux subtracted in 200 components = 0.0173895 Jy
! Clean residual min=-0.003680 max=0.005219 Jy/beam
! Clean residual mean=0.000004 rms=0.001333 Jy/beam
! Combined flux in latest and established models = 0.0514042 Jy
! Adding 62 model components to the UV plane model.
! The established model now contains 75 components and 0.0514042 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.653 mas, bmaj=12.51 mas, bpa=0.5781 degrees
! Estimated noise=4.69343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305225 Jy
! Component: 100  -  total flux cleaned = 0.00444508 Jy
! Component: 150  -  total flux cleaned = 0.00512105 Jy
! Component: 200  -  total flux cleaned = 0.00517861 Jy
! Total flux subtracted in 200 components = 0.00517861 Jy
! Clean residual min=-0.004978 max=0.008340 Jy/beam
! Clean residual mean=0.000002 rms=0.002176 Jy/beam
! Combined flux in latest and established models = 0.0565828 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.50102e-05 Jy
! Component: 100  -  total flux cleaned = 9.01604e-05 Jy
! Component: 150  -  total flux cleaned = 0.000139591 Jy
! Component: 200  -  total flux cleaned = 0.000170947 Jy
! Total flux subtracted in 200 components = 0.000170947 Jy
! Clean residual min=-0.004931 max=0.008296 Jy/beam
! Clean residual mean=0.000002 rms=0.002167 Jy/beam
! Combined flux in latest and established models = 0.0567537 Jy
! Adding 40 model components to the UV plane model.
! The established model now contains 102 components and 0.0567537 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.479 mas, bmaj=10.48 mas, bpa=1.381 degrees
! Estimated noise=3.94596 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102652 Jy
! Component: 100  -  total flux cleaned = -0.00128097 Jy
! Component: 150  -  total flux cleaned = -0.0013636 Jy
! Component: 200  -  total flux cleaned = -0.00138579 Jy
! Total flux subtracted in 200 components = -0.00138579 Jy
! Clean residual min=-0.003343 max=0.005054 Jy/beam
! Clean residual mean=0.000002 rms=0.001219 Jy/beam
! Combined flux in latest and established models = 0.055368 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 113 components and 0.055368 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.041608Jy  sigma=0.100293
! Fit after  self-cal, rms=0.041600Jy  sigma=0.100166
wmodel /g0/scr/pima/npcsc_uvs/J1842+7946_S_map.mod
! Writing 113 model components to file: /g0/scr/pima/npcsc_uvs/J1842+7946_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1842+7946_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1842+7946_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1842+7946_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00217701 Jy
! Component: 100  -  total flux cleaned = 0.00402984 Jy
! Component: 150  -  total flux cleaned = 0.00569746 Jy
! Component: 200  -  total flux cleaned = 0.00721373 Jy
! Component: 250  -  total flux cleaned = 0.0086079 Jy
! Component: 300  -  total flux cleaned = 0.00990795 Jy
! Component: 350  -  total flux cleaned = 0.010884 Jy
! Component: 400  -  total flux cleaned = 0.0117116 Jy
! Component: 450  -  total flux cleaned = 0.0121461 Jy
! Component: 500  -  total flux cleaned = 0.0124365 Jy
! Component: 550  -  total flux cleaned = 0.0127923 Jy
! Component: 600  -  total flux cleaned = 0.0131723 Jy
! Component: 650  -  total flux cleaned = 0.0134657 Jy
! Component: 700  -  total flux cleaned = 0.0138197 Jy
! Component: 750  -  total flux cleaned = 0.0141627 Jy
! Component: 800  -  total flux cleaned = 0.0144615 Jy
! Component: 850  -  total flux cleaned = 0.014752 Jy
! Component: 900  -  total flux cleaned = 0.0150979 Jy
! Component: 950  -  total flux cleaned = 0.0153726 Jy
! Component: 1000  -  total flux cleaned = 0.0155799 Jy
! Component: 1050  -  total flux cleaned = 0.0157542 Jy
! Component: 1100  -  total flux cleaned = 0.0159238 Jy
! Component: 1150  -  total flux cleaned = 0.0161173 Jy
! Component: 1200  -  total flux cleaned = 0.0162794 Jy
! Component: 1250  -  total flux cleaned = 0.0164116 Jy
! Component: 1300  -  total flux cleaned = 0.0166696 Jy
! Component: 1350  -  total flux cleaned = 0.0168204 Jy
! Component: 1400  -  total flux cleaned = 0.016994 Jy
! Component: 1450  -  total flux cleaned = 0.0172371 Jy
! Component: 1500  -  total flux cleaned = 0.0173566 Jy
! Component: 1550  -  total flux cleaned = 0.0175441 Jy
! Component: 1600  -  total flux cleaned = 0.0177744 Jy
! Component: 1650  -  total flux cleaned = 0.0179777 Jy
! Component: 1700  -  total flux cleaned = 0.0181994 Jy
! Component: 1750  -  total flux cleaned = 0.0183515 Jy
! Component: 1800  -  total flux cleaned = 0.0184804 Jy
! Component: 1850  -  total flux cleaned = 0.0186072 Jy
! Component: 1900  -  total flux cleaned = 0.0187526 Jy
! Component: 1950  -  total flux cleaned = 0.0189562 Jy
! Component: 2000  -  total flux cleaned = 0.019097 Jy
! Component: 2050  -  total flux cleaned = 0.0191956 Jy
! Component: 2100  -  total flux cleaned = 0.0193517 Jy
! Component: 2150  -  total flux cleaned = 0.0194477 Jy
! Component: 2200  -  total flux cleaned = 0.0195802 Jy
! Component: 2250  -  total flux cleaned = 0.0195989 Jy
! Component: 2300  -  total flux cleaned = 0.0197287 Jy
! Component: 2350  -  total flux cleaned = 0.0197838 Jy
! Component: 2400  -  total flux cleaned = 0.0199106 Jy
! Component: 2450  -  total flux cleaned = 0.0200176 Jy
! Component: 2500  -  total flux cleaned = 0.0200707 Jy
! Component: 2550  -  total flux cleaned = 0.0201579 Jy
! Component: 2600  -  total flux cleaned = 0.0201928 Jy
! Component: 2650  -  total flux cleaned = 0.0202614 Jy
! Component: 2700  -  total flux cleaned = 0.0203632 Jy
! Component: 2750  -  total flux cleaned = 0.0204301 Jy
! Component: 2800  -  total flux cleaned = 0.0204632 Jy
! Component: 2850  -  total flux cleaned = 0.0205618 Jy
! Component: 2900  -  total flux cleaned = 0.0206108 Jy
! Component: 2950  -  total flux cleaned = 0.0207076 Jy
! Component: 3000  -  total flux cleaned = 0.0207396 Jy
! Component: 3050  -  total flux cleaned = 0.0208031 Jy
! Component: 3100  -  total flux cleaned = 0.0209129 Jy
! Component: 3150  -  total flux cleaned = 0.0209593 Jy
! Component: 3200  -  total flux cleaned = 0.0209901 Jy
! Component: 3250  -  total flux cleaned = 0.0210817 Jy
! Component: 3300  -  total flux cleaned = 0.0211723 Jy
! Component: 3350  -  total flux cleaned = 0.0212023 Jy
! Component: 3400  -  total flux cleaned = 0.0212916 Jy
! Component: 3450  -  total flux cleaned = 0.0213506 Jy
! Component: 3500  -  total flux cleaned = 0.0213799 Jy
! Component: 3550  -  total flux cleaned = 0.0214235 Jy
! Component: 3600  -  total flux cleaned = 0.0214956 Jy
! Component: 3650  -  total flux cleaned = 0.0215529 Jy
! Component: 3700  -  total flux cleaned = 0.0216099 Jy
! Component: 3750  -  total flux cleaned = 0.0216807 Jy
! Component: 3800  -  total flux cleaned = 0.021751 Jy
! Component: 3850  -  total flux cleaned = 0.021807 Jy
! Component: 3900  -  total flux cleaned = 0.0218347 Jy
! Component: 3950  -  total flux cleaned = 0.0218624 Jy
! Component: 4000  -  total flux cleaned = 0.0219726 Jy
! Component: 4050  -  total flux cleaned = 0.0220272 Jy
! Total flux subtracted in 4096 components = 0.0220817 Jy
! Clean residual min=-0.000942 max=0.000769 Jy/beam
! Clean residual mean=-0.000005 rms=0.000273 Jy/beam
! Combined flux in latest and established models = 0.0774496 Jy
keep
! Adding 454 model components to the UV plane model.
! The established model now contains 567 components and 0.0774496 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1842+7946_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.479 x 10.48 at 1.381 degrees (North through East)
! Clean map  min=-0.0013666  max=0.027709 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1842+7946_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0277089 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000261585 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.83215 2.83215 5.66429 11.3286 22.6572 45.3143 90.6287
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.027 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1842+7946_S_uvs.log closed on Sun Oct  6 14:31:08 2013