! Started logfile: /g0/scr/pima/npcsc_uvs/J1803+7601_X_uvs.log on Sun Oct  6 14:26:21 2013
obs /g0/scr/pima/npcsc_uvs/J1803+7601_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1803+7601_X_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J1803+7601
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2760 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1803+7601_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.008419Jy  sigma=0.775331
! Fit after  self-cal, rms=0.952778Jy  sigma=0.697908
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9615 mas, bmaj=6.84 mas, bpa=-23.15 degrees
! Estimated noise=37.9569 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0578588 Jy
! Component: 100  -  total flux cleaned = 0.0693593 Jy
! Total flux subtracted in 100 components = 0.0693593 Jy
! Clean residual min=-0.009257 max=0.009551 Jy/beam
! Clean residual mean=0.000004 rms=0.003068 Jy/beam
! Combined flux in latest and established models = 0.0693593 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 8 components and 0.0693593 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080089Jy  sigma=0.060666
! Fit after  self-cal, rms=0.077926Jy  sigma=0.059161
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.224 mas, bmaj=6.7 mas, bpa=-23.19 degrees
! Estimated noise=19.8761 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00496219 Jy
! Component: 100  -  total flux cleaned = 0.00478432 Jy
! Component: 150  -  total flux cleaned = 0.00416402 Jy
! Component: 200  -  total flux cleaned = 0.00343497 Jy
! Total flux subtracted in 200 components = 0.00343497 Jy
! Clean residual min=-0.004857 max=0.004991 Jy/beam
! Clean residual mean=0.000010 rms=0.001343 Jy/beam
! Combined flux in latest and established models = 0.0727943 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 24 components and 0.0727943 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078801Jy  sigma=0.058012
! Fit after  self-cal, rms=0.078788Jy  sigma=0.058000
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.83     KP        0.93     LA        0.91     NL        0.90     
!   OV        0.92     PT        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.82     KP        0.91     LA        0.94     NL        0.86     
!   OV        0.86     PT        1.01     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.81     KP        0.71     LA        0.85     NL        0.91     
!   OV        0.86     PT        0.97     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.88     KP        0.84     LA        0.83     NL        0.93     
!   OV        0.88     PT        0.92     
! 
! 
! Fit before self-cal, rms=0.078788Jy  sigma=0.058000
! Fit after  self-cal, rms=0.067377Jy  sigma=0.055266
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.202 mas, bmaj=6.681 mas, bpa=-23.24 degrees
! Estimated noise=15.5858 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0115429 Jy
! Component: 100  -  total flux cleaned = -0.0127787 Jy
! Component: 150  -  total flux cleaned = -0.0131225 Jy
! Component: 200  -  total flux cleaned = -0.0136579 Jy
! Total flux subtracted in 200 components = -0.0136579 Jy
! Clean residual min=-0.002634 max=0.002628 Jy/beam
! Clean residual mean=0.000004 rms=0.000702 Jy/beam
! Combined flux in latest and established models = 0.0591364 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 35 components and 0.0591364 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062004Jy  sigma=0.056967
! Fit after  self-cal, rms=0.062058Jy  sigma=0.056910
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062058Jy  sigma=0.056910
! Fit after  self-cal, rms=0.054338Jy  sigma=0.055134
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.194 mas, bmaj=6.656 mas, bpa=-23.18 degrees
! Estimated noise=12.535 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00927999 Jy
! Component: 100  -  total flux cleaned = -0.0107018 Jy
! Component: 150  -  total flux cleaned = -0.0109804 Jy
! Component: 200  -  total flux cleaned = -0.0114515 Jy
! Total flux subtracted in 200 components = -0.0114515 Jy
! Clean residual min=-0.002094 max=0.002017 Jy/beam
! Clean residual mean=0.000002 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0476849 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 37 components and 0.0476849 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050047Jy  sigma=0.056860
! Fit after  self-cal, rms=0.050051Jy  sigma=0.056849
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000286302 Jy
! Component: 100  -  total flux cleaned = -0.000683592 Jy
! Component: 150  -  total flux cleaned = -0.000994334 Jy
! Component: 200  -  total flux cleaned = -0.00120758 Jy
! Total flux subtracted in 200 components = -0.00120758 Jy
! Clean residual min=-0.002105 max=0.002003 Jy/beam
! Clean residual mean=0.000002 rms=0.000545 Jy/beam
! Combined flux in latest and established models = 0.0464773 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 46 components and 0.0464773 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049978Jy  sigma=0.056877
! Fit after  self-cal, rms=0.049974Jy  sigma=0.056869
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049974Jy  sigma=0.056869
! Fit after  self-cal, rms=0.043493Jy  sigma=0.055038
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.186 mas, bmaj=6.628 mas, bpa=-23.1 degrees
! Estimated noise=10.0224 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00740222 Jy
! Component: 100  -  total flux cleaned = -0.0090297 Jy
! Component: 150  -  total flux cleaned = -0.00911849 Jy
! Component: 200  -  total flux cleaned = -0.00906597 Jy
! Total flux subtracted in 200 components = -0.00906597 Jy
! Clean residual min=-0.001683 max=0.001598 Jy/beam
! Clean residual mean=0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.0374114 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 53 components and 0.0374114 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040074Jy  sigma=0.056811
! Fit after  self-cal, rms=0.040072Jy  sigma=0.056802
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000271672 Jy
! Component: 100  -  total flux cleaned = -0.000364054 Jy
! Component: 150  -  total flux cleaned = -0.000376307 Jy
! Component: 200  -  total flux cleaned = -0.000354324 Jy
! Total flux subtracted in 200 components = -0.000354324 Jy
! Clean residual min=-0.001682 max=0.001569 Jy/beam
! Clean residual mean=0.000001 rms=0.000422 Jy/beam
! Combined flux in latest and established models = 0.037057 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 61 components and 0.037057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040041Jy  sigma=0.056822
! Fit after  self-cal, rms=0.040042Jy  sigma=0.056819
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.040042Jy  sigma=0.056819
! Fit after  self-cal, rms=0.034831Jy  sigma=0.054989
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.937 mas, bmaj=6.262 mas, bpa=-20.75 degrees
! Estimated noise=9.52149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00587949 Jy
! Component: 100  -  total flux cleaned = -0.00717293 Jy
! Component: 150  -  total flux cleaned = -0.00721456 Jy
! Component: 200  -  total flux cleaned = -0.00713006 Jy
! Total flux subtracted in 200 components = -0.00713006 Jy
! Clean residual min=-0.001171 max=0.001209 Jy/beam
! Clean residual mean=0.000001 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.029927 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 71 components and 0.029927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032133Jy  sigma=0.056738
! Fit after  self-cal, rms=0.032132Jy  sigma=0.056727
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.03873e-05 Jy
! Component: 100  -  total flux cleaned = 0.000170234 Jy
! Component: 150  -  total flux cleaned = 0.000249176 Jy
! Component: 200  -  total flux cleaned = 0.000319945 Jy
! Total flux subtracted in 200 components = 0.000319945 Jy
! Clean residual min=-0.001134 max=0.001159 Jy/beam
! Clean residual mean=0.000001 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0302469 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 83 components and 0.0302469 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.032119Jy  sigma=0.056744
! Fit after  self-cal, rms=0.032119Jy  sigma=0.056743
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=6.593 mas, bpa=-22.99 degrees
! Estimated noise=8.00739 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.181 x 6.593 at -22.99 degrees (North through East)
! Clean map  min=-0.0036795  max=0.031383 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9382 mas, bmaj=6.788 mas, bpa=-22.92 degrees
! Estimated noise=14.7586 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0228458 Jy
! Component: 100  -  total flux cleaned = 0.0287822 Jy
! Component: 150  -  total flux cleaned = 0.0312409 Jy
! Component: 200  -  total flux cleaned = 0.0318711 Jy
! Total flux subtracted in 200 components = 0.0318711 Jy
! Clean residual min=-0.003505 max=0.003392 Jy/beam
! Clean residual mean=0.000001 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.0318711 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 28 model components to the UV plane model.
! The established model now contains 28 components and 0.0318711 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=6.593 mas, bpa=-22.99 degrees
! Estimated noise=8.00739 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (8.4, -17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000851718 Jy
! Component: 100  -  total flux cleaned = 0.000353053 Jy
! Component: 150  -  total flux cleaned = 2.6509e-05 Jy
! Component: 200  -  total flux cleaned = -0.000368469 Jy
! Total flux subtracted in 200 components = -0.000368469 Jy
! Clean residual min=-0.001570 max=0.001314 Jy/beam
! Clean residual mean=0.000002 rms=0.000379 Jy/beam
! Combined flux in latest and established models = 0.0315026 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 60 components and 0.0315026 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.937 mas, bmaj=6.262 mas, bpa=-20.75 degrees
! Estimated noise=9.52149 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000152313 Jy
! Component: 100  -  total flux cleaned = -0.000139259 Jy
! Component: 150  -  total flux cleaned = -0.000436085 Jy
! Component: 200  -  total flux cleaned = -0.000665155 Jy
! Total flux subtracted in 200 components = -0.000665155 Jy
! Clean residual min=-0.001375 max=0.001294 Jy/beam
! Clean residual mean=0.000003 rms=0.000342 Jy/beam
! Combined flux in latest and established models = 0.0308374 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205612 Jy
! Component: 100  -  total flux cleaned = -0.000407198 Jy
! Component: 150  -  total flux cleaned = -0.000593029 Jy
! Component: 200  -  total flux cleaned = -0.000776209 Jy
! Total flux subtracted in 200 components = -0.000776209 Jy
! Clean residual min=-0.001277 max=0.001219 Jy/beam
! Clean residual mean=0.000002 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.0300612 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 87 components and 0.0300612 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.181 mas, bmaj=6.593 mas, bpa=-22.99 degrees
! Estimated noise=8.00739 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.41947e-05 Jy
! Component: 100  -  total flux cleaned = -2.57225e-05 Jy
! Component: 150  -  total flux cleaned = -0.000130847 Jy
! Component: 200  -  total flux cleaned = -0.000177094 Jy
! Total flux subtracted in 200 components = -0.000177094 Jy
! Clean residual min=-0.001379 max=0.001358 Jy/beam
! Clean residual mean=0.000001 rms=0.000305 Jy/beam
! Combined flux in latest and established models = 0.0298841 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 116 components and 0.0298841 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.031960Jy  sigma=0.056790
! Fit after  self-cal, rms=0.031952Jy  sigma=0.056729
wmodel /g0/scr/pima/npcsc_uvs/J1803+7601_X_map.mod
! Writing 116 model components to file: /g0/scr/pima/npcsc_uvs/J1803+7601_X_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1803+7601_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1803+7601_X_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1803+7601_X_map.win
! wwins: Wrote 2 windows to /g0/scr/pima/npcsc_uvs/J1803+7601_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000123638 Jy
! Component: 100  -  total flux cleaned = 2.84719e-05 Jy
! Component: 150  -  total flux cleaned = 6.32635e-05 Jy
! Component: 200  -  total flux cleaned = 0.000130527 Jy
! Component: 250  -  total flux cleaned = 0.00027448 Jy
! Component: 300  -  total flux cleaned = 0.000319981 Jy
! Component: 350  -  total flux cleaned = 0.000363641 Jy
! Component: 400  -  total flux cleaned = 0.000391764 Jy
! Component: 450  -  total flux cleaned = 0.000489096 Jy
! Component: 500  -  total flux cleaned = 0.000610892 Jy
! Component: 550  -  total flux cleaned = 0.00071653 Jy
! Component: 600  -  total flux cleaned = 0.000845492 Jy
! Component: 650  -  total flux cleaned = 0.000971981 Jy
! Component: 700  -  total flux cleaned = 0.00108344 Jy
! Component: 750  -  total flux cleaned = 0.00124131 Jy
! Component: 800  -  total flux cleaned = 0.00133651 Jy
! Component: 850  -  total flux cleaned = 0.00144189 Jy
! Component: 900  -  total flux cleaned = 0.00154548 Jy
! Component: 950  -  total flux cleaned = 0.00164753 Jy
! Component: 1000  -  total flux cleaned = 0.0017706 Jy
! Component: 1050  -  total flux cleaned = 0.00189156 Jy
! Component: 1100  -  total flux cleaned = 0.00196719 Jy
! Component: 1150  -  total flux cleaned = 0.00200989 Jy
! Component: 1200  -  total flux cleaned = 0.00208391 Jy
! Component: 1250  -  total flux cleaned = 0.00215701 Jy
! Component: 1300  -  total flux cleaned = 0.00223944 Jy
! Component: 1350  -  total flux cleaned = 0.00229048 Jy
! Component: 1400  -  total flux cleaned = 0.00232087 Jy
! Component: 1450  -  total flux cleaned = 0.00240105 Jy
! Component: 1500  -  total flux cleaned = 0.00246057 Jy
! Component: 1550  -  total flux cleaned = 0.00252932 Jy
! Component: 1600  -  total flux cleaned = 0.00256835 Jy
! Component: 1650  -  total flux cleaned = 0.00263579 Jy
! Component: 1700  -  total flux cleaned = 0.00268355 Jy
! Component: 1750  -  total flux cleaned = 0.0027215 Jy
! Component: 1800  -  total flux cleaned = 0.00275929 Jy
! Component: 1850  -  total flux cleaned = 0.00284324 Jy
! Component: 1900  -  total flux cleaned = 0.00287108 Jy
! Component: 1950  -  total flux cleaned = 0.00296291 Jy
! Component: 2000  -  total flux cleaned = 0.00303569 Jy
! Component: 2050  -  total flux cleaned = 0.00308993 Jy
! Component: 2100  -  total flux cleaned = 0.00316168 Jy
! Component: 2150  -  total flux cleaned = 0.00321514 Jy
! Component: 2200  -  total flux cleaned = 0.00326839 Jy
! Component: 2250  -  total flux cleaned = 0.00333009 Jy
! Component: 2300  -  total flux cleaned = 0.00341782 Jy
! Component: 2350  -  total flux cleaned = 0.00347885 Jy
! Component: 2400  -  total flux cleaned = 0.00353095 Jy
! Component: 2450  -  total flux cleaned = 0.00360872 Jy
! Component: 2500  -  total flux cleaned = 0.00368613 Jy
! Component: 2550  -  total flux cleaned = 0.00374603 Jy
! Component: 2600  -  total flux cleaned = 0.00379718 Jy
! Component: 2650  -  total flux cleaned = 0.0038482 Jy
! Component: 2700  -  total flux cleaned = 0.00388209 Jy
! Component: 2750  -  total flux cleaned = 0.00394962 Jy
! Component: 2800  -  total flux cleaned = 0.00398325 Jy
! Component: 2850  -  total flux cleaned = 0.00403355 Jy
! Component: 2900  -  total flux cleaned = 0.00407529 Jy
! Component: 2950  -  total flux cleaned = 0.00410865 Jy
! Component: 3000  -  total flux cleaned = 0.00415849 Jy
! Component: 3050  -  total flux cleaned = 0.00419163 Jy
! Component: 3100  -  total flux cleaned = 0.00424122 Jy
! Component: 3150  -  total flux cleaned = 0.00427412 Jy
! Component: 3200  -  total flux cleaned = 0.00430695 Jy
! Component: 3250  -  total flux cleaned = 0.0043561 Jy
! Component: 3300  -  total flux cleaned = 0.00435611 Jy
! Component: 3350  -  total flux cleaned = 0.00439679 Jy
! Component: 3400  -  total flux cleaned = 0.00441299 Jy
! Component: 3450  -  total flux cleaned = 0.0043887 Jy
! Component: 3500  -  total flux cleaned = 0.00442111 Jy
! Component: 3550  -  total flux cleaned = 0.00443725 Jy
! Component: 3600  -  total flux cleaned = 0.00446139 Jy
! Component: 3650  -  total flux cleaned = 0.00446136 Jy
! Component: 3700  -  total flux cleaned = 0.00446938 Jy
! Component: 3750  -  total flux cleaned = 0.00449342 Jy
! Component: 3800  -  total flux cleaned = 0.00450145 Jy
! Component: 3850  -  total flux cleaned = 0.00452548 Jy
! Component: 3900  -  total flux cleaned = 0.00454945 Jy
! Component: 3950  -  total flux cleaned = 0.00456539 Jy
! Component: 4000  -  total flux cleaned = 0.00456541 Jy
! Component: 4050  -  total flux cleaned = 0.00458137 Jy
! Total flux subtracted in 4096 components = 0.00462114 Jy
! Clean residual min=-0.000464 max=0.000477 Jy/beam
! Clean residual mean=0.000000 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0345053 Jy
keep
! Adding 234 model components to the UV plane model.
! The established model now contains 350 components and 0.0345053 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1803+7601_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.181 x 6.593 at -22.99 degrees (North through East)
! Clean map  min=-0.0018963  max=0.028234 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1803+7601_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0282337 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000143308 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.52273 1.52273 3.04546 6.09092 12.1818 24.3637 48.7273 97.4547
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.028 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1803+7601_X_uvs.log closed on Sun Oct  6 14:26:25 2013