! Started logfile: /g0/scr/pima/npcsc_uvs/J1632+8232_X_uvs.log on Sun Oct 6 14:25:49 2013 obs /g0/scr/pima/npcsc_uvs/J1632+8232_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_X_uva.fits ! AN table 1: 47 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.979196 visibilities/baseline/integration-bin. ! Found source: J1632+8232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 8284 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1632+8232_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.094471Jy sigma=4.559217 ! Fit after self-cal, rms=0.614510Jy sigma=1.909684 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.686 mas, bmaj=2.721 mas, bpa=4.336 degrees ! Estimated noise=4.89333 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.316124 Jy ! Component: 100 - total flux cleaned = 0.418444 Jy ! Total flux subtracted in 100 components = 0.418444 Jy ! Clean residual min=-0.030168 max=0.064824 Jy/beam ! Clean residual mean=-0.000122 rms=0.010126 Jy/beam ! Combined flux in latest and established models = 0.418444 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.418444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172663Jy sigma=0.873141 ! Fit after self-cal, rms=0.172042Jy sigma=0.871275 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0609625 Jy ! Component: 100 - total flux cleaned = 0.095992 Jy ! Total flux subtracted in 100 components = 0.095992 Jy ! Clean residual min=-0.030088 max=0.063218 Jy/beam ! Clean residual mean=-0.000087 rms=0.007734 Jy/beam ! Combined flux in latest and established models = 0.514436 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 27 components and 0.514436 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145071Jy sigma=0.666093 ! Fit after self-cal, rms=0.144777Jy sigma=0.663978 ! Inverting map ! Added new window around map position (-2.4, 1.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567022 Jy ! Component: 100 - total flux cleaned = 0.086082 Jy ! Total flux subtracted in 100 components = 0.086082 Jy ! Clean residual min=-0.026659 max=0.043440 Jy/beam ! Clean residual mean=-0.000050 rms=0.005599 Jy/beam ! Combined flux in latest and established models = 0.600518 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 39 components and 0.600518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.121168Jy sigma=0.506963 ! Fit after self-cal, rms=0.119051Jy sigma=0.502633 ! Inverting map ! Added new window around map position (-1.2, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.040998 Jy ! Component: 100 - total flux cleaned = 0.0634929 Jy ! Total flux subtracted in 100 components = 0.0634929 Jy ! Clean residual min=-0.021099 max=0.018924 Jy/beam ! Clean residual mean=-0.000024 rms=0.003783 Jy/beam ! Combined flux in latest and established models = 0.664011 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 55 components and 0.664011 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103172Jy sigma=0.398581 ! Fit after self-cal, rms=0.100254Jy sigma=0.392269 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9817 mas, bmaj=3.018 mas, bpa=2.883 degrees ! Estimated noise=2.19377 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.029163 Jy ! Component: 100 - total flux cleaned = 0.0457492 Jy ! Component: 150 - total flux cleaned = 0.056119 Jy ! Component: 200 - total flux cleaned = 0.0612965 Jy ! Total flux subtracted in 200 components = 0.0612965 Jy ! Clean residual min=-0.015904 max=0.015713 Jy/beam ! Clean residual mean=-0.000006 rms=0.003492 Jy/beam ! Combined flux in latest and established models = 0.725308 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 79 components and 0.725308 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093947Jy sigma=0.341684 ! Fit after self-cal, rms=0.092732Jy sigma=0.338500 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.06 HN 1.04 KP 1.03 ! LA 1.01 MK 1.01 NL 1.02 OV 1.01 ! PT 1.00 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.05 HN 1.01 KP 0.95 ! LA 0.95 MK 0.98 NL 1.01 OV 0.99 ! PT 1.03 SC 0.97 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 1.02 HN 1.01 KP 0.84 ! LA 0.96 MK 0.93 NL 0.97 OV 0.99 ! PT 0.99 SC 0.95 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 1.04 HN 0.98 KP 0.90 ! LA 0.95 MK 0.95 NL 0.94 OV 1.00 ! PT 1.06 SC 1.00 ! ! ! Fit before self-cal, rms=0.092732Jy sigma=0.338500 ! Fit after self-cal, rms=0.086031Jy sigma=0.296675 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.9783 mas, bmaj=3.02 mas, bpa=3.023 degrees ! Estimated noise=2.14487 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00569601 Jy ! Component: 100 - total flux cleaned = -0.00567218 Jy ! Component: 150 - total flux cleaned = -0.00550582 Jy ! Component: 200 - total flux cleaned = -0.00564556 Jy ! Total flux subtracted in 200 components = -0.00564556 Jy ! Clean residual min=-0.005978 max=0.007362 Jy/beam ! Clean residual mean=-0.000017 rms=0.001582 Jy/beam ! Combined flux in latest and established models = 0.719662 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 88 components and 0.719663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083939Jy sigma=0.294450 ! Fit after self-cal, rms=0.083715Jy sigma=0.293895 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083715Jy sigma=0.293895 ! Fit after self-cal, rms=0.083249Jy sigma=0.292710 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9733 mas, bmaj=3.02 mas, bpa=3.095 degrees ! Estimated noise=2.11351 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00618892 Jy ! Component: 100 - total flux cleaned = -0.00621775 Jy ! Component: 150 - total flux cleaned = -0.00610469 Jy ! Component: 200 - total flux cleaned = -0.00609913 Jy ! Total flux subtracted in 200 components = -0.00609913 Jy ! Clean residual min=-0.005141 max=0.006674 Jy/beam ! Clean residual mean=-0.000015 rms=0.001460 Jy/beam ! Combined flux in latest and established models = 0.713563 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 92 components and 0.713563 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081771Jy sigma=0.292646 ! Fit after self-cal, rms=0.081683Jy sigma=0.292456 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -14.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0053307 Jy ! Component: 100 - total flux cleaned = 0.00739418 Jy ! Component: 150 - total flux cleaned = 0.00928174 Jy ! Component: 200 - total flux cleaned = 0.0107822 Jy ! Total flux subtracted in 200 components = 0.0107822 Jy ! Clean residual min=-0.004318 max=0.004931 Jy/beam ! Clean residual mean=-0.000013 rms=0.001131 Jy/beam ! Combined flux in latest and established models = 0.724346 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 114 components and 0.724346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.081202Jy sigma=0.289991 ! Fit after self-cal, rms=0.081164Jy sigma=0.289910 ! Inverting map ! Added new window around map position (-4.8, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00481015 Jy ! Component: 100 - total flux cleaned = 0.00692696 Jy ! Component: 150 - total flux cleaned = 0.00828576 Jy ! Component: 200 - total flux cleaned = 0.00929897 Jy ! Total flux subtracted in 200 components = 0.00929897 Jy ! Clean residual min=-0.003494 max=0.003375 Jy/beam ! Clean residual mean=-0.000004 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.733645 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 140 components and 0.733645 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080824Jy sigma=0.288249 ! Fit after self-cal, rms=0.080802Jy sigma=0.288087 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080802Jy sigma=0.288087 ! Fit after self-cal, rms=0.080258Jy sigma=0.286839 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.9663 mas, bmaj=3.018 mas, bpa=3.175 degrees ! Estimated noise=2.07964 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00449368 Jy ! Component: 100 - total flux cleaned = -0.00349684 Jy ! Component: 150 - total flux cleaned = -0.00241076 Jy ! Component: 200 - total flux cleaned = -0.00178733 Jy ! Total flux subtracted in 200 components = -0.00178733 Jy ! Clean residual min=-0.003151 max=0.002983 Jy/beam ! Clean residual mean=-0.000001 rms=0.000744 Jy/beam ! Combined flux in latest and established models = 0.731857 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 156 components and 0.731857 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079144Jy sigma=0.287299 ! Fit after self-cal, rms=0.079141Jy sigma=0.287250 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000337812 Jy ! Component: 100 - total flux cleaned = 0.000750233 Jy ! Component: 150 - total flux cleaned = 0.000970618 Jy ! Component: 200 - total flux cleaned = 0.00112707 Jy ! Total flux subtracted in 200 components = 0.00112707 Jy ! Clean residual min=-0.002992 max=0.002822 Jy/beam ! Clean residual mean=-0.000001 rms=0.000709 Jy/beam ! Combined flux in latest and established models = 0.732984 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 167 components and 0.732984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078978Jy sigma=0.287108 ! Fit after self-cal, rms=0.078978Jy sigma=0.287097 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.078978Jy sigma=0.287097 ! Fit after self-cal, rms=0.078613Jy sigma=0.286179 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=3.681 mas, bpa=-1.071 degrees ! Estimated noise=2.0987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00326173 Jy ! Component: 100 - total flux cleaned = -0.00240746 Jy ! Component: 150 - total flux cleaned = -0.00219166 Jy ! Component: 200 - total flux cleaned = -0.00223995 Jy ! Total flux subtracted in 200 components = -0.00223995 Jy ! Clean residual min=-0.003130 max=0.003152 Jy/beam ! Clean residual mean=0.000001 rms=0.000787 Jy/beam ! Combined flux in latest and established models = 0.730745 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 180 components and 0.730745 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077889Jy sigma=0.286609 ! Fit after self-cal, rms=0.077890Jy sigma=0.286589 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000273354 Jy ! Component: 100 - total flux cleaned = 0.000352426 Jy ! Component: 150 - total flux cleaned = 0.000388175 Jy ! Component: 200 - total flux cleaned = 0.000387885 Jy ! Total flux subtracted in 200 components = 0.000387885 Jy ! Clean residual min=-0.002986 max=0.002834 Jy/beam ! Clean residual mean=0.000001 rms=0.000739 Jy/beam ! Combined flux in latest and established models = 0.731133 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 203 components and 0.731133 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077842Jy sigma=0.286551 ! Fit after self-cal, rms=0.077840Jy sigma=0.286546 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=0.9615 mas, bmaj=3.017 mas, bpa=3.237 degrees ! Estimated noise=2.05137 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9615 x 3.017 at 3.237 degrees (North through East) ! Clean map min=-0.002756 max=0.41998 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.6733 mas, bmaj=2.737 mas, bpa=4.625 degrees ! Estimated noise=4.48926 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.294062 Jy ! Component: 100 - total flux cleaned = 0.399532 Jy ! Component: 150 - total flux cleaned = 0.467468 Jy ! Component: 200 - total flux cleaned = 0.516376 Jy ! Total flux subtracted in 200 components = 0.516376 Jy ! Clean residual min=-0.016533 max=0.027825 Jy/beam ! Clean residual mean=-0.000077 rms=0.005505 Jy/beam ! Combined flux in latest and established models = 0.516376 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.516376 Jy ! Inverting map and beam ! Estimated beam: bmin=0.9615 mas, bmaj=3.017 mas, bpa=3.237 degrees ! Estimated noise=2.05137 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0685808 Jy ! Component: 100 - total flux cleaned = 0.109157 Jy ! Component: 150 - total flux cleaned = 0.134766 Jy ! Component: 200 - total flux cleaned = 0.151123 Jy ! Total flux subtracted in 200 components = 0.151123 Jy ! Clean residual min=-0.008122 max=0.010092 Jy/beam ! Clean residual mean=-0.000059 rms=0.002775 Jy/beam ! Combined flux in latest and established models = 0.667499 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 52 components and 0.667499 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.314 mas, bmaj=3.681 mas, bpa=-1.071 degrees ! Estimated noise=2.0987 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0174867 Jy ! Component: 100 - total flux cleaned = 0.0281054 Jy ! Component: 150 - total flux cleaned = 0.0351967 Jy ! Component: 200 - total flux cleaned = 0.0405487 Jy ! Total flux subtracted in 200 components = 0.0405487 Jy ! Clean residual min=-0.005608 max=0.004315 Jy/beam ! Clean residual mean=-0.000027 rms=0.001647 Jy/beam ! Combined flux in latest and established models = 0.708047 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00429451 Jy ! Component: 100 - total flux cleaned = 0.00783752 Jy ! Component: 150 - total flux cleaned = 0.0108026 Jy ! Component: 200 - total flux cleaned = 0.0132991 Jy ! Total flux subtracted in 200 components = 0.0132991 Jy ! Clean residual min=-0.004042 max=0.002951 Jy/beam ! Clean residual mean=-0.000012 rms=0.000989 Jy/beam ! Combined flux in latest and established models = 0.721347 Jy ! Adding 86 model components to the UV plane model. ! The established model now contains 124 components and 0.721346 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.9615 mas, bmaj=3.017 mas, bpa=3.237 degrees ! Estimated noise=2.05137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00226345 Jy ! Component: 100 - total flux cleaned = 0.00353202 Jy ! Component: 150 - total flux cleaned = 0.00472228 Jy ! Component: 200 - total flux cleaned = 0.00548342 Jy ! Total flux subtracted in 200 components = 0.00548342 Jy ! Clean residual min=-0.003375 max=0.002860 Jy/beam ! Clean residual mean=-0.000004 rms=0.000693 Jy/beam ! Combined flux in latest and established models = 0.72683 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 146 components and 0.72683 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.077706Jy sigma=0.287352 ! Fit after self-cal, rms=0.077494Jy sigma=0.286947 wmodel /g0/scr/pima/npcsc_uvs/J1632+8232_X_map.mod ! Writing 146 model components to file: /g0/scr/pima/npcsc_uvs/J1632+8232_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J1632+8232_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J1632+8232_X_map.win ! wwins: Wrote 5 windows to /g0/scr/pima/npcsc_uvs/J1632+8232_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143673 Jy ! Component: 100 - total flux cleaned = -0.00217186 Jy ! Component: 150 - total flux cleaned = -0.00267955 Jy ! Component: 200 - total flux cleaned = -0.00288012 Jy ! Component: 250 - total flux cleaned = -0.00303442 Jy ! Component: 300 - total flux cleaned = -0.00307126 Jy ! Component: 350 - total flux cleaned = -0.0031432 Jy ! Component: 400 - total flux cleaned = -0.00317912 Jy ! Component: 450 - total flux cleaned = -0.00311095 Jy ! Component: 500 - total flux cleaned = -0.00307676 Jy ! Component: 550 - total flux cleaned = -0.00294589 Jy ! Component: 600 - total flux cleaned = -0.00278671 Jy ! Component: 650 - total flux cleaned = -0.00278606 Jy ! Component: 700 - total flux cleaned = -0.00263124 Jy ! Component: 750 - total flux cleaned = -0.00251022 Jy ! Component: 800 - total flux cleaned = -0.00233177 Jy ! Component: 850 - total flux cleaned = -0.00218569 Jy ! Component: 900 - total flux cleaned = -0.00215659 Jy ! Component: 950 - total flux cleaned = -0.00204252 Jy ! Component: 1000 - total flux cleaned = -0.00204234 Jy ! Component: 1050 - total flux cleaned = -0.00193236 Jy ! Component: 1100 - total flux cleaned = -0.00195941 Jy ! Component: 1150 - total flux cleaned = -0.00193248 Jy ! Component: 1200 - total flux cleaned = -0.00185305 Jy ! Component: 1250 - total flux cleaned = -0.00169701 Jy ! Component: 1300 - total flux cleaned = -0.00174863 Jy ! Component: 1350 - total flux cleaned = -0.00154475 Jy ! Component: 1400 - total flux cleaned = -0.00149437 Jy ! Component: 1450 - total flux cleaned = -0.00139449 Jy ! Component: 1500 - total flux cleaned = -0.00134501 Jy ! Component: 1550 - total flux cleaned = -0.00119842 Jy ! Component: 1600 - total flux cleaned = -0.00127065 Jy ! Component: 1650 - total flux cleaned = -0.00112734 Jy ! Component: 1700 - total flux cleaned = -0.0010562 Jy ! Component: 1750 - total flux cleaned = -0.00110319 Jy ! Component: 1800 - total flux cleaned = -0.00110318 Jy ! Component: 1850 - total flux cleaned = -0.0010344 Jy ! Component: 1900 - total flux cleaned = -0.00112555 Jy ! Component: 1950 - total flux cleaned = -0.00105742 Jy ! Component: 2000 - total flux cleaned = -0.0010799 Jy ! Component: 2050 - total flux cleaned = -0.00107992 Jy ! Component: 2100 - total flux cleaned = -0.00105792 Jy ! Component: 2150 - total flux cleaned = -0.00105805 Jy ! Component: 2200 - total flux cleaned = -0.00101486 Jy ! Component: 2250 - total flux cleaned = -0.00116638 Jy ! Component: 2300 - total flux cleaned = -0.00118769 Jy ! Component: 2350 - total flux cleaned = -0.00131533 Jy ! Component: 2400 - total flux cleaned = -0.00131507 Jy ! Component: 2450 - total flux cleaned = -0.00129425 Jy ! Component: 2500 - total flux cleaned = -0.00143983 Jy ! Component: 2550 - total flux cleaned = -0.00139844 Jy ! Component: 2600 - total flux cleaned = -0.00135726 Jy ! Component: 2650 - total flux cleaned = -0.00145911 Jy ! Component: 2700 - total flux cleaned = -0.00143849 Jy ! Component: 2750 - total flux cleaned = -0.0014988 Jy ! Component: 2800 - total flux cleaned = -0.00157819 Jy ! Component: 2850 - total flux cleaned = -0.00145937 Jy ! Component: 2900 - total flux cleaned = -0.00149883 Jy ! Component: 2950 - total flux cleaned = -0.00151836 Jy ! Component: 3000 - total flux cleaned = -0.00155714 Jy ! Component: 3050 - total flux cleaned = -0.00147954 Jy ! Component: 3100 - total flux cleaned = -0.00155659 Jy ! Component: 3150 - total flux cleaned = -0.00151838 Jy ! Component: 3200 - total flux cleaned = -0.00151844 Jy ! Component: 3250 - total flux cleaned = -0.00146184 Jy ! Component: 3300 - total flux cleaned = -0.00144321 Jy ! Component: 3350 - total flux cleaned = -0.00146199 Jy ! Component: 3400 - total flux cleaned = -0.00146172 Jy ! Component: 3450 - total flux cleaned = -0.00138781 Jy ! Component: 3500 - total flux cleaned = -0.00138792 Jy ! Component: 3550 - total flux cleaned = -0.00136952 Jy ! Component: 3600 - total flux cleaned = -0.00135127 Jy ! Component: 3650 - total flux cleaned = -0.00136926 Jy ! Component: 3700 - total flux cleaned = -0.00129729 Jy ! Component: 3750 - total flux cleaned = -0.00127954 Jy ! Component: 3800 - total flux cleaned = -0.00127978 Jy ! Component: 3850 - total flux cleaned = -0.00131502 Jy ! Component: 3900 - total flux cleaned = -0.00127987 Jy ! Component: 3950 - total flux cleaned = -0.00131505 Jy ! Component: 4000 - total flux cleaned = -0.00129751 Jy ! Component: 4050 - total flux cleaned = -0.00129763 Jy ! Total flux subtracted in 4096 components = -0.00136709 Jy ! Clean residual min=-0.001044 max=0.000990 Jy/beam ! Clean residual mean=0.000000 rms=0.000309 Jy/beam ! Combined flux in latest and established models = 0.725463 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 424 components and 0.725464 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J1632+8232_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9615 x 3.017 at 3.237 degrees (North through East) ! Clean map min=-0.0017617 max=0.41939 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.419394 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000304515 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.217825 0.217825 0.435651 0.871302 1.7426 3.48521 6.97042 13.9408 27.8817 55.7633 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.419 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J1632+8232_X_uvs.log closed on Sun Oct 6 14:25:54 2013