! Started logfile: /g0/scr/pima/npcsc_uvs/J1632+8232_S_uvs.log on Sun Oct  6 14:30:14 2013
obs /g0/scr/pima/npcsc_uvs/J1632+8232_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_S_uva.fits
! AN table 1: 47 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.957447 visibilities/baseline/integration-bin.
! Found source: J1632+8232
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 8100 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1632+8232_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 10 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.123529Jy  sigma=3.907997
! Fit after  self-cal, rms=0.619789Jy  sigma=1.691794
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.94 mas, bmaj=9.729 mas, bpa=4.003 degrees
! Estimated noise=6.29787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.310838 Jy
! Component: 100  -  total flux cleaned = 0.417196 Jy
! Total flux subtracted in 100 components = 0.417196 Jy
! Clean residual min=-0.021327 max=0.047864 Jy/beam
! Clean residual mean=-0.000030 rms=0.007238 Jy/beam
! Combined flux in latest and established models = 0.417196 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.417196 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.150074Jy  sigma=0.591796
! Fit after  self-cal, rms=0.150242Jy  sigma=0.591345
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0543521 Jy
! Component: 100  -  total flux cleaned = 0.0831809 Jy
! Total flux subtracted in 100 components = 0.0831809 Jy
! Clean residual min=-0.014255 max=0.025447 Jy/beam
! Clean residual mean=-0.000010 rms=0.004145 Jy/beam
! Combined flux in latest and established models = 0.500377 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.500377 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.124108Jy  sigma=0.448303
! Fit after  self-cal, rms=0.124056Jy  sigma=0.447796
! Inverting map 
! Added new window around map position (-4.5, 2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0264209 Jy
! Component: 100  -  total flux cleaned = 0.0401865 Jy
! Total flux subtracted in 100 components = 0.0401865 Jy
! Clean residual min=-0.013941 max=0.012755 Jy/beam
! Clean residual mean=-0.000005 rms=0.003247 Jy/beam
! Combined flux in latest and established models = 0.540564 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 41 components and 0.540564 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.116252Jy  sigma=0.405951
! Fit after  self-cal, rms=0.115524Jy  sigma=0.404777
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.995 mas, bmaj=10.92 mas, bpa=2.496 degrees
! Estimated noise=2.58905 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0274911 Jy
! Component: 100  -  total flux cleaned = 0.0424107 Jy
! Component: 150  -  total flux cleaned = 0.0518314 Jy
! Component: 200  -  total flux cleaned = 0.058176 Jy
! Total flux subtracted in 200 components = 0.058176 Jy
! Clean residual min=-0.016643 max=0.014801 Jy/beam
! Clean residual mean=0.000014 rms=0.004236 Jy/beam
! Combined flux in latest and established models = 0.59874 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 81 components and 0.59874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.111617Jy  sigma=0.374082
! Fit after  self-cal, rms=0.111123Jy  sigma=0.372736
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.01     HN        0.97     KP        0.99     
!   LA        1.10     MK        0.89     NL        1.00     OV        1.00     
!   PT        1.07     SC        0.93     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        1.04     HN        0.96     KP        0.98     
!   LA        1.04     MK        0.95     NL        0.99     OV        1.01     
!   PT        1.01     SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        1.06     HN        1.00     KP        1.00     
!   LA        0.84     MK        1.02     NL        1.10     OV        1.03     
!   PT        1.08     SC        0.98     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        1.05     HN        0.93     KP        0.92     
!   LA        0.73     MK        1.06     NL        1.03     OV        0.89     
!   PT        0.97     SC        1.07     
! 
! 
! Fit before self-cal, rms=0.111123Jy  sigma=0.372736
! Fit after  self-cal, rms=0.092834Jy  sigma=0.282107
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.982 mas, bmaj=10.91 mas, bpa=2.467 degrees
! Estimated noise=2.51909 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00390801 Jy
! Component: 100  -  total flux cleaned = -0.00311985 Jy
! Component: 150  -  total flux cleaned = -0.00373313 Jy
! Component: 200  -  total flux cleaned = -0.00411922 Jy
! Total flux subtracted in 200 components = -0.00411922 Jy
! Clean residual min=-0.005052 max=0.005870 Jy/beam
! Clean residual mean=-0.000003 rms=0.001324 Jy/beam
! Combined flux in latest and established models = 0.59462 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 95 components and 0.59462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090898Jy  sigma=0.281796
! Fit after  self-cal, rms=0.090845Jy  sigma=0.281439
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090845Jy  sigma=0.281439
! Fit after  self-cal, rms=0.090410Jy  sigma=0.280111
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.97 mas, bmaj=10.91 mas, bpa=2.477 degrees
! Estimated noise=2.47529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00607961 Jy
! Component: 100  -  total flux cleaned = -0.00605294 Jy
! Component: 150  -  total flux cleaned = -0.00605207 Jy
! Component: 200  -  total flux cleaned = -0.00629279 Jy
! Total flux subtracted in 200 components = -0.00629279 Jy
! Clean residual min=-0.004607 max=0.005420 Jy/beam
! Clean residual mean=-0.000003 rms=0.001208 Jy/beam
! Combined flux in latest and established models = 0.588328 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.588328 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088760Jy  sigma=0.281014
! Fit after  self-cal, rms=0.088725Jy  sigma=0.280941
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-10.5, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00488793 Jy
! Component: 100  -  total flux cleaned = 0.0053472 Jy
! Component: 150  -  total flux cleaned = 0.00535399 Jy
! Component: 200  -  total flux cleaned = 0.00557852 Jy
! Total flux subtracted in 200 components = 0.00557852 Jy
! Clean residual min=-0.003461 max=0.003855 Jy/beam
! Clean residual mean=-0.000003 rms=0.000936 Jy/beam
! Combined flux in latest and established models = 0.593906 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 128 components and 0.593906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088302Jy  sigma=0.280038
! Fit after  self-cal, rms=0.088279Jy  sigma=0.279976
! Inverting map 
! Added new window around map position (123.5, 18).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00360679 Jy
! Component: 100  -  total flux cleaned = 0.00506074 Jy
! Component: 150  -  total flux cleaned = 0.00591337 Jy
! Component: 200  -  total flux cleaned = 0.00640605 Jy
! Total flux subtracted in 200 components = 0.00640605 Jy
! Clean residual min=-0.002885 max=0.002744 Jy/beam
! Clean residual mean=-0.000003 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.600312 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 168 components and 0.600312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088096Jy  sigma=0.279254
! Fit after  self-cal, rms=0.088082Jy  sigma=0.279204
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088082Jy  sigma=0.279204
! Fit after  self-cal, rms=0.087436Jy  sigma=0.277528
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.948 mas, bmaj=10.9 mas, bpa=2.548 degrees
! Estimated noise=2.42282 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00630236 Jy
! Component: 100  -  total flux cleaned = -0.00642223 Jy
! Component: 150  -  total flux cleaned = -0.00623441 Jy
! Component: 200  -  total flux cleaned = -0.00602833 Jy
! Total flux subtracted in 200 components = -0.00602833 Jy
! Clean residual min=-0.002735 max=0.002592 Jy/beam
! Clean residual mean=-0.000000 rms=0.000686 Jy/beam
! Combined flux in latest and established models = 0.594284 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 190 components and 0.594284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086028Jy  sigma=0.278584
! Fit after  self-cal, rms=0.086024Jy  sigma=0.278569
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000318672 Jy
! Component: 100  -  total flux cleaned = 0.000545719 Jy
! Component: 150  -  total flux cleaned = 0.000796013 Jy
! Component: 200  -  total flux cleaned = 0.000989526 Jy
! Total flux subtracted in 200 components = 0.000989526 Jy
! Clean residual min=-0.002542 max=0.002578 Jy/beam
! Clean residual mean=0.000000 rms=0.000649 Jy/beam
! Combined flux in latest and established models = 0.595273 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 209 components and 0.595274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085930Jy  sigma=0.278528
! Fit after  self-cal, rms=0.085929Jy  sigma=0.278522
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085929Jy  sigma=0.278522
! Fit after  self-cal, rms=0.085501Jy  sigma=0.277288
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.024 mas, bmaj=12.62 mas, bpa=1.87 degrees
! Estimated noise=2.40784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00571136 Jy
! Component: 100  -  total flux cleaned = -0.00562294 Jy
! Component: 150  -  total flux cleaned = -0.00541619 Jy
! Component: 200  -  total flux cleaned = -0.00525254 Jy
! Total flux subtracted in 200 components = -0.00525254 Jy
! Clean residual min=-0.002739 max=0.002343 Jy/beam
! Clean residual mean=0.000001 rms=0.000692 Jy/beam
! Combined flux in latest and established models = 0.590021 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 222 components and 0.590021 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084286Jy  sigma=0.278337
! Fit after  self-cal, rms=0.084280Jy  sigma=0.278320
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.69296e-05 Jy
! Component: 100  -  total flux cleaned = 0.000260364 Jy
! Component: 150  -  total flux cleaned = 0.0003179 Jy
! Component: 200  -  total flux cleaned = 0.000344511 Jy
! Total flux subtracted in 200 components = 0.000344511 Jy
! Clean residual min=-0.002614 max=0.002253 Jy/beam
! Clean residual mean=0.000002 rms=0.000655 Jy/beam
! Combined flux in latest and established models = 0.590366 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 237 components and 0.590366 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084247Jy  sigma=0.278378
! Fit after  self-cal, rms=0.084247Jy  sigma=0.278375
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.935 mas, bmaj=10.89 mas, bpa=2.6 degrees
! Estimated noise=2.38054 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.935 x 10.89 at 2.6 degrees (North through East)
! Clean map  min=-0.0034347  max=0.41322 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.899 mas, bmaj=9.732 mas, bpa=4.044 degrees
! Estimated noise=5.75996 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.285778 Jy
! Component: 100  -  total flux cleaned = 0.388 Jy
! Component: 150  -  total flux cleaned = 0.443566 Jy
! Component: 200  -  total flux cleaned = 0.478762 Jy
! Total flux subtracted in 200 components = 0.478762 Jy
! Clean residual min=-0.008806 max=0.018694 Jy/beam
! Clean residual mean=-0.000015 rms=0.003259 Jy/beam
! Combined flux in latest and established models = 0.478762 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.478762 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.935 mas, bmaj=10.89 mas, bpa=2.6 degrees
! Estimated noise=2.38054 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0393311 Jy
! Component: 100  -  total flux cleaned = 0.0600249 Jy
! Component: 150  -  total flux cleaned = 0.072612 Jy
! Component: 200  -  total flux cleaned = 0.0809101 Jy
! Total flux subtracted in 200 components = 0.0809101 Jy
! Clean residual min=-0.005214 max=0.005085 Jy/beam
! Clean residual mean=-0.000007 rms=0.001519 Jy/beam
! Combined flux in latest and established models = 0.559672 Jy
! Adding 52 model components to the UV plane model.
! The established model now contains 68 components and 0.559672 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.024 mas, bmaj=12.62 mas, bpa=1.87 degrees
! Estimated noise=2.40784 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00864591 Jy
! Component: 100  -  total flux cleaned = 0.0145926 Jy
! Component: 150  -  total flux cleaned = 0.018996 Jy
! Component: 200  -  total flux cleaned = 0.0219518 Jy
! Total flux subtracted in 200 components = 0.0219518 Jy
! Clean residual min=-0.003856 max=0.003702 Jy/beam
! Clean residual mean=-0.000007 rms=0.001077 Jy/beam
! Combined flux in latest and established models = 0.581624 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00159979 Jy
! Component: 100  -  total flux cleaned = 0.00249927 Jy
! Component: 150  -  total flux cleaned = 0.00336071 Jy
! Component: 200  -  total flux cleaned = 0.00405255 Jy
! Total flux subtracted in 200 components = 0.00405255 Jy
! Clean residual min=-0.003256 max=0.002885 Jy/beam
! Clean residual mean=-0.000005 rms=0.000841 Jy/beam
! Combined flux in latest and established models = 0.585676 Jy
! Adding 77 model components to the UV plane model.
! The established model now contains 131 components and 0.585677 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.935 mas, bmaj=10.89 mas, bpa=2.6 degrees
! Estimated noise=2.38054 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000766178 Jy
! Component: 100  -  total flux cleaned = -0.000401616 Jy
! Component: 150  -  total flux cleaned = -8.76932e-05 Jy
! Component: 200  -  total flux cleaned = 0.000188961 Jy
! Total flux subtracted in 200 components = 0.000188961 Jy
! Clean residual min=-0.003058 max=0.002339 Jy/beam
! Clean residual mean=0.000000 rms=0.000679 Jy/beam
! Combined flux in latest and established models = 0.585865 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 163 components and 0.585866 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084062Jy  sigma=0.279070
! Fit after  self-cal, rms=0.084033Jy  sigma=0.279015
wmodel /g0/scr/pima/npcsc_uvs/J1632+8232_S_map.mod
! Writing 163 model components to file: /g0/scr/pima/npcsc_uvs/J1632+8232_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1632+8232_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1632+8232_S_map.win
! wwins: Wrote 4 windows to /g0/scr/pima/npcsc_uvs/J1632+8232_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00125993 Jy
! Component: 100  -  total flux cleaned = -0.00203101 Jy
! Component: 150  -  total flux cleaned = -0.00215065 Jy
! Component: 200  -  total flux cleaned = -0.00211649 Jy
! Component: 250  -  total flux cleaned = -0.00215142 Jy
! Component: 300  -  total flux cleaned = -0.00228574 Jy
! Component: 350  -  total flux cleaned = -0.00241554 Jy
! Component: 400  -  total flux cleaned = -0.00257269 Jy
! Component: 450  -  total flux cleaned = -0.00272563 Jy
! Component: 500  -  total flux cleaned = -0.00290466 Jy
! Component: 550  -  total flux cleaned = -0.00307964 Jy
! Component: 600  -  total flux cleaned = -0.00322175 Jy
! Component: 650  -  total flux cleaned = -0.00333359 Jy
! Component: 700  -  total flux cleaned = -0.00344334 Jy
! Component: 750  -  total flux cleaned = -0.00357651 Jy
! Component: 800  -  total flux cleaned = -0.00370649 Jy
! Component: 850  -  total flux cleaned = -0.00385867 Jy
! Component: 900  -  total flux cleaned = -0.00398351 Jy
! Component: 950  -  total flux cleaned = -0.00408141 Jy
! Component: 1000  -  total flux cleaned = -0.00422555 Jy
! Component: 1050  -  total flux cleaned = -0.00424941 Jy
! Component: 1100  -  total flux cleaned = -0.00431944 Jy
! Component: 1150  -  total flux cleaned = -0.00434225 Jy
! Component: 1200  -  total flux cleaned = -0.00431941 Jy
! Component: 1250  -  total flux cleaned = -0.00431934 Jy
! Component: 1300  -  total flux cleaned = -0.00434155 Jy
! Component: 1350  -  total flux cleaned = -0.00444977 Jy
! Component: 1400  -  total flux cleaned = -0.00449231 Jy
! Component: 1450  -  total flux cleaned = -0.00455529 Jy
! Component: 1500  -  total flux cleaned = -0.004701 Jy
! Component: 1550  -  total flux cleaned = -0.00476279 Jy
! Component: 1600  -  total flux cleaned = -0.00486457 Jy
! Component: 1650  -  total flux cleaned = -0.00500543 Jy
! Component: 1700  -  total flux cleaned = -0.00510482 Jy
! Component: 1750  -  total flux cleaned = -0.00522286 Jy
! Component: 1800  -  total flux cleaned = -0.00532041 Jy
! Component: 1850  -  total flux cleaned = -0.00547479 Jy
! Component: 1900  -  total flux cleaned = -0.00560834 Jy
! Component: 1950  -  total flux cleaned = -0.00568406 Jy
! Component: 2000  -  total flux cleaned = -0.00585259 Jy
! Component: 2050  -  total flux cleaned = -0.00590829 Jy
! Component: 2100  -  total flux cleaned = -0.00603705 Jy
! Component: 2150  -  total flux cleaned = -0.00612829 Jy
! Component: 2200  -  total flux cleaned = -0.00623685 Jy
! Component: 2250  -  total flux cleaned = -0.00632632 Jy
! Component: 2300  -  total flux cleaned = -0.00641521 Jy
! Component: 2350  -  total flux cleaned = -0.00639755 Jy
! Component: 2400  -  total flux cleaned = -0.00652022 Jy
! Component: 2450  -  total flux cleaned = -0.0065899 Jy
! Component: 2500  -  total flux cleaned = -0.00662435 Jy
! Component: 2550  -  total flux cleaned = -0.00669316 Jy
! Component: 2600  -  total flux cleaned = -0.00677796 Jy
! Component: 2650  -  total flux cleaned = -0.00677787 Jy
! Component: 2700  -  total flux cleaned = -0.00682797 Jy
! Component: 2750  -  total flux cleaned = -0.00681154 Jy
! Component: 2800  -  total flux cleaned = -0.00686132 Jy
! Component: 2850  -  total flux cleaned = -0.00692704 Jy
! Component: 2900  -  total flux cleaned = -0.00702478 Jy
! Component: 2950  -  total flux cleaned = -0.00707324 Jy
! Component: 3000  -  total flux cleaned = -0.00710538 Jy
! Component: 3050  -  total flux cleaned = -0.00721709 Jy
! Component: 3100  -  total flux cleaned = -0.00731236 Jy
! Component: 3150  -  total flux cleaned = -0.00734414 Jy
! Component: 3200  -  total flux cleaned = -0.00739115 Jy
! Component: 3250  -  total flux cleaned = -0.0074847 Jy
! Component: 3300  -  total flux cleaned = -0.00757763 Jy
! Component: 3350  -  total flux cleaned = -0.00759288 Jy
! Component: 3400  -  total flux cleaned = -0.00763886 Jy
! Component: 3450  -  total flux cleaned = -0.00769982 Jy
! Component: 3500  -  total flux cleaned = -0.00777566 Jy
! Component: 3550  -  total flux cleaned = -0.00779079 Jy
! Component: 3600  -  total flux cleaned = -0.00789561 Jy
! Component: 3650  -  total flux cleaned = -0.00791035 Jy
! Component: 3700  -  total flux cleaned = -0.00795476 Jy
! Component: 3750  -  total flux cleaned = -0.0079843 Jy
! Component: 3800  -  total flux cleaned = -0.00808698 Jy
! Component: 3850  -  total flux cleaned = -0.0081454 Jy
! Component: 3900  -  total flux cleaned = -0.00820356 Jy
! Component: 3950  -  total flux cleaned = -0.00824685 Jy
! Component: 4000  -  total flux cleaned = -0.0082899 Jy
! Component: 4050  -  total flux cleaned = -0.00837577 Jy
! Total flux subtracted in 4096 components = -0.00838992 Jy
! Clean residual min=-0.000824 max=0.000935 Jy/beam
! Clean residual mean=0.000001 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.577476 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 455 components and 0.577476 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1632+8232_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.935 x 10.89 at 2.6 degrees (North through East)
! Clean map  min=-0.0023556  max=0.41221 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1632+8232_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.41221 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000274357 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.199673 0.199673 0.399345 0.798691 1.59738 3.19476 6.38952 12.779 25.5581 51.1162
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0008 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.412 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1632+8232_S_uvs.log closed on Sun Oct  6 14:30:18 2013