! Started logfile: /g0/scr/pima/npcsc_uvs/J1607+8501_S_uvs.log on Sun Oct  6 14:30:03 2013
obs /g0/scr/pima/npcsc_uvs/J1607+8501_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1607+8501_S_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955556 visibilities/baseline/integration-bin.
! Found source: J1607+8501
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7912 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1607+8501_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.004802Jy  sigma=0.775452
! Fit after  self-cal, rms=0.958667Jy  sigma=0.696854
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.692 mas, bmaj=9.677 mas, bpa=0.873 degrees
! Estimated noise=23.6042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0528287 Jy
! Component: 100  -  total flux cleaned = 0.0646984 Jy
! Total flux subtracted in 100 components = 0.0646984 Jy
! Clean residual min=-0.008645 max=0.009664 Jy/beam
! Clean residual mean=-0.000005 rms=0.002212 Jy/beam
! Combined flux in latest and established models = 0.0646984 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0646984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097589Jy  sigma=0.088285
! Fit after  self-cal, rms=0.096117Jy  sigma=0.086905
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.4 mas, bmaj=10.85 mas, bpa=-0.1323 degrees
! Estimated noise=11.7344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0128031 Jy
! Component: 100  -  total flux cleaned = 0.0206946 Jy
! Component: 150  -  total flux cleaned = 0.0258567 Jy
! Component: 200  -  total flux cleaned = 0.0292768 Jy
! Total flux subtracted in 200 components = 0.0292768 Jy
! Clean residual min=-0.006294 max=0.008125 Jy/beam
! Clean residual mean=-0.000008 rms=0.001686 Jy/beam
! Combined flux in latest and established models = 0.0939752 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 38 components and 0.0939752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097451Jy  sigma=0.083397
! Fit after  self-cal, rms=0.097035Jy  sigma=0.083132
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.91     HN        0.73     KP        0.86     
!   LA        0.88     MK        0.83     NL        1.03     OV        0.99     
!   PT        0.94     SC        0.76     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        0.88     HN        0.67     KP        1.01     
!   LA        0.83     MK        0.86     NL        0.97     OV        0.90     
!   PT        0.93     SC        0.62     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        0.90     HN        0.78     KP        0.85     
!   LA        0.66     MK        1.04     NL        1.33     OV        1.01     
!   PT        0.91     SC        0.81     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.88     HN        0.72     KP        0.86     
!   LA        0.55     MK        1.13     NL        1.11     OV        0.83     
!   PT        0.83     SC        0.77     
! 
! 
! Fit before self-cal, rms=0.097035Jy  sigma=0.083132
! Fit after  self-cal, rms=0.079031Jy  sigma=0.078515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.382 mas, bmaj=10.74 mas, bpa=-1.57 degrees
! Estimated noise=8.70541 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0143159 Jy
! Component: 100  -  total flux cleaned = -0.0159116 Jy
! Component: 150  -  total flux cleaned = -0.0154345 Jy
! Component: 200  -  total flux cleaned = -0.0151053 Jy
! Total flux subtracted in 200 components = -0.0151053 Jy
! Clean residual min=-0.002751 max=0.003031 Jy/beam
! Clean residual mean=-0.000004 rms=0.000798 Jy/beam
! Combined flux in latest and established models = 0.0788699 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 48 components and 0.0788699 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072400Jy  sigma=0.080443
! Fit after  self-cal, rms=0.072571Jy  sigma=0.080166
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072571Jy  sigma=0.080166
! Fit after  self-cal, rms=0.061265Jy  sigma=0.077905
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.346 mas, bmaj=10.67 mas, bpa=-1.865 degrees
! Estimated noise=6.69348 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0105386 Jy
! Component: 100  -  total flux cleaned = -0.0128416 Jy
! Component: 150  -  total flux cleaned = -0.0134939 Jy
! Component: 200  -  total flux cleaned = -0.0138462 Jy
! Total flux subtracted in 200 components = -0.0138462 Jy
! Clean residual min=-0.002287 max=0.002226 Jy/beam
! Clean residual mean=-0.000003 rms=0.000604 Jy/beam
! Combined flux in latest and established models = 0.0650237 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 52 components and 0.0650237 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056452Jy  sigma=0.080031
! Fit after  self-cal, rms=0.056423Jy  sigma=0.079995
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00022069 Jy
! Component: 100  -  total flux cleaned = 0.000250738 Jy
! Component: 150  -  total flux cleaned = 0.000287611 Jy
! Component: 200  -  total flux cleaned = 0.000297375 Jy
! Total flux subtracted in 200 components = 0.000297375 Jy
! Clean residual min=-0.002266 max=0.002367 Jy/beam
! Clean residual mean=-0.000003 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0653211 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 66 components and 0.0653211 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056374Jy  sigma=0.080044
! Fit after  self-cal, rms=0.056355Jy  sigma=0.080041
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056355Jy  sigma=0.080041
! Fit after  self-cal, rms=0.047415Jy  sigma=0.077903
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.321 mas, bmaj=10.59 mas, bpa=-1.922 degrees
! Estimated noise=5.19027 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00740685 Jy
! Component: 100  -  total flux cleaned = -0.00952155 Jy
! Component: 150  -  total flux cleaned = -0.0106945 Jy
! Component: 200  -  total flux cleaned = -0.0114119 Jy
! Total flux subtracted in 200 components = -0.0114119 Jy
! Clean residual min=-0.001750 max=0.001843 Jy/beam
! Clean residual mean=-0.000002 rms=0.000475 Jy/beam
! Combined flux in latest and established models = 0.0539092 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 76 components and 0.0539092 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044106Jy  sigma=0.079867
! Fit after  self-cal, rms=0.044069Jy  sigma=0.079853
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000391895 Jy
! Component: 100  -  total flux cleaned = -0.000559972 Jy
! Component: 150  -  total flux cleaned = -0.000626073 Jy
! Component: 200  -  total flux cleaned = -0.000664554 Jy
! Total flux subtracted in 200 components = -0.000664554 Jy
! Clean residual min=-0.001793 max=0.001842 Jy/beam
! Clean residual mean=-0.000002 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.0532447 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.0532447 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043970Jy  sigma=0.080005
! Fit after  self-cal, rms=0.043981Jy  sigma=0.079995
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043981Jy  sigma=0.079995
! Fit after  self-cal, rms=0.037104Jy  sigma=0.077958
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.009 mas, bmaj=12.58 mas, bpa=-1.782 degrees
! Estimated noise=5.24453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00636346 Jy
! Component: 100  -  total flux cleaned = -0.00832205 Jy
! Component: 150  -  total flux cleaned = -0.00922487 Jy
! Component: 200  -  total flux cleaned = -0.00965337 Jy
! Total flux subtracted in 200 components = -0.00965337 Jy
! Clean residual min=-0.001612 max=0.001831 Jy/beam
! Clean residual mean=-0.000003 rms=0.000546 Jy/beam
! Combined flux in latest and established models = 0.0435913 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 103 components and 0.0435913 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034522Jy  sigma=0.080018
! Fit after  self-cal, rms=0.034501Jy  sigma=0.079991
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000173501 Jy
! Component: 100  -  total flux cleaned = -0.000202241 Jy
! Component: 150  -  total flux cleaned = -0.00020715 Jy
! Component: 200  -  total flux cleaned = -0.000215928 Jy
! Total flux subtracted in 200 components = -0.000215928 Jy
! Clean residual min=-0.001546 max=0.001857 Jy/beam
! Clean residual mean=-0.000003 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0433754 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 109 components and 0.0433754 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034481Jy  sigma=0.080038
! Fit after  self-cal, rms=0.034477Jy  sigma=0.080036
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=10.52 mas, bpa=-1.816 degrees
! Estimated noise=4.05353 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 10.52 at -1.816 degrees (North through East)
! Clean map  min=-0.0013853  max=0.025295 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.665 mas, bmaj=9.57 mas, bpa=-1.025 degrees
! Estimated noise=7.83164 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0173384 Jy
! Component: 100  -  total flux cleaned = 0.0231085 Jy
! Component: 150  -  total flux cleaned = 0.026812 Jy
! Component: 200  -  total flux cleaned = 0.0295896 Jy
! Total flux subtracted in 200 components = 0.0295896 Jy
! Clean residual min=-0.002935 max=0.002811 Jy/beam
! Clean residual mean=-0.000001 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.0295896 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 34 model components to the UV plane model.
! The established model now contains 34 components and 0.0295896 Jy
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=10.52 mas, bpa=-1.816 degrees
! Estimated noise=4.05353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00412962 Jy
! Component: 100  -  total flux cleaned = 0.00694759 Jy
! Component: 150  -  total flux cleaned = 0.00889624 Jy
! Component: 200  -  total flux cleaned = 0.0102471 Jy
! Total flux subtracted in 200 components = 0.0102471 Jy
! Clean residual min=-0.001446 max=0.001490 Jy/beam
! Clean residual mean=-0.000002 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0398366 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 57 components and 0.0398366 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.009 mas, bmaj=12.58 mas, bpa=-1.782 degrees
! Estimated noise=5.24453 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00185227 Jy
! Component: 100  -  total flux cleaned = 0.00270193 Jy
! Component: 150  -  total flux cleaned = 0.00312648 Jy
! Component: 200  -  total flux cleaned = 0.00334379 Jy
! Total flux subtracted in 200 components = 0.00334379 Jy
! Clean residual min=-0.001562 max=0.001909 Jy/beam
! Clean residual mean=-0.000003 rms=0.000548 Jy/beam
! Combined flux in latest and established models = 0.0431804 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.76535e-05 Jy
! Component: 100  -  total flux cleaned = 2.30575e-05 Jy
! Component: 150  -  total flux cleaned = 2.84676e-05 Jy
! Component: 200  -  total flux cleaned = 3.36448e-05 Jy
! Total flux subtracted in 200 components = 3.36448e-05 Jy
! Clean residual min=-0.001556 max=0.001904 Jy/beam
! Clean residual mean=-0.000003 rms=0.000547 Jy/beam
! Combined flux in latest and established models = 0.0432141 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 76 components and 0.0432141 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=3.305 mas, bmaj=10.52 mas, bpa=-1.816 degrees
! Estimated noise=4.05353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00034701 Jy
! Component: 100  -  total flux cleaned = -0.000307749 Jy
! Component: 150  -  total flux cleaned = -0.000295864 Jy
! Component: 200  -  total flux cleaned = -0.000279229 Jy
! Total flux subtracted in 200 components = -0.000279229 Jy
! Clean residual min=-0.001397 max=0.001472 Jy/beam
! Clean residual mean=-0.000002 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.0429348 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 84 components and 0.0429348 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034462Jy  sigma=0.080080
! Fit after  self-cal, rms=0.034458Jy  sigma=0.080068
wmodel /g0/scr/pima/npcsc_uvs/J1607+8501_S_map.mod
! Writing 84 model components to file: /g0/scr/pima/npcsc_uvs/J1607+8501_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1607+8501_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1607+8501_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1607+8501_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1607+8501_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.0002128 Jy
! Component: 100  -  total flux cleaned = 0.000329248 Jy
! Component: 150  -  total flux cleaned = 0.000436893 Jy
! Component: 200  -  total flux cleaned = 0.000582111 Jy
! Component: 250  -  total flux cleaned = 0.000681485 Jy
! Component: 300  -  total flux cleaned = 0.000815654 Jy
! Component: 350  -  total flux cleaned = 0.000965411 Jy
! Component: 400  -  total flux cleaned = 0.00112912 Jy
! Component: 450  -  total flux cleaned = 0.00120019 Jy
! Component: 500  -  total flux cleaned = 0.00128723 Jy
! Component: 550  -  total flux cleaned = 0.00137219 Jy
! Component: 600  -  total flux cleaned = 0.00143875 Jy
! Component: 650  -  total flux cleaned = 0.00150398 Jy
! Component: 700  -  total flux cleaned = 0.00161515 Jy
! Component: 750  -  total flux cleaned = 0.00166163 Jy
! Component: 800  -  total flux cleaned = 0.00173783 Jy
! Component: 850  -  total flux cleaned = 0.00173758 Jy
! Component: 900  -  total flux cleaned = 0.00172308 Jy
! Component: 950  -  total flux cleaned = 0.00180976 Jy
! Component: 1000  -  total flux cleaned = 0.00180961 Jy
! Component: 1050  -  total flux cleaned = 0.00185117 Jy
! Component: 1100  -  total flux cleaned = 0.00187859 Jy
! Component: 1150  -  total flux cleaned = 0.00191933 Jy
! Component: 1200  -  total flux cleaned = 0.00194595 Jy
! Component: 1250  -  total flux cleaned = 0.0019987 Jy
! Component: 1300  -  total flux cleaned = 0.0020764 Jy
! Component: 1350  -  total flux cleaned = 0.00212734 Jy
! Component: 1400  -  total flux cleaned = 0.00216531 Jy
! Component: 1450  -  total flux cleaned = 0.00225276 Jy
! Component: 1500  -  total flux cleaned = 0.00228952 Jy
! Component: 1550  -  total flux cleaned = 0.00232613 Jy
! Component: 1600  -  total flux cleaned = 0.00242222 Jy
! Component: 1650  -  total flux cleaned = 0.00246971 Jy
! Component: 1700  -  total flux cleaned = 0.00249339 Jy
! Component: 1750  -  total flux cleaned = 0.00258633 Jy
! Component: 1800  -  total flux cleaned = 0.00266646 Jy
! Component: 1850  -  total flux cleaned = 0.00267796 Jy
! Component: 1900  -  total flux cleaned = 0.00275639 Jy
! Component: 1950  -  total flux cleaned = 0.00284499 Jy
! Component: 2000  -  total flux cleaned = 0.002867 Jy
! Component: 2050  -  total flux cleaned = 0.00295374 Jy
! Component: 2100  -  total flux cleaned = 0.00302888 Jy
! Component: 2150  -  total flux cleaned = 0.00303943 Jy
! Component: 2200  -  total flux cleaned = 0.00306056 Jy
! Component: 2250  -  total flux cleaned = 0.00314424 Jy
! Component: 2300  -  total flux cleaned = 0.00318577 Jy
! Component: 2350  -  total flux cleaned = 0.00325778 Jy
! Component: 2400  -  total flux cleaned = 0.00331899 Jy
! Component: 2450  -  total flux cleaned = 0.00336965 Jy
! Component: 2500  -  total flux cleaned = 0.00340984 Jy
! Component: 2550  -  total flux cleaned = 0.00343971 Jy
! Component: 2600  -  total flux cleaned = 0.00349907 Jy
! Component: 2650  -  total flux cleaned = 0.00355805 Jy
! Component: 2700  -  total flux cleaned = 0.00359701 Jy
! Component: 2750  -  total flux cleaned = 0.00364536 Jy
! Component: 2800  -  total flux cleaned = 0.00366454 Jy
! Component: 2850  -  total flux cleaned = 0.00371225 Jy
! Component: 2900  -  total flux cleaned = 0.00374066 Jy
! Component: 2950  -  total flux cleaned = 0.00376889 Jy
! Component: 3000  -  total flux cleaned = 0.00379697 Jy
! Component: 3050  -  total flux cleaned = 0.00382479 Jy
! Component: 3100  -  total flux cleaned = 0.00384323 Jy
! Component: 3150  -  total flux cleaned = 0.00387996 Jy
! Component: 3200  -  total flux cleaned = 0.0038891 Jy
! Component: 3250  -  total flux cleaned = 0.00392535 Jy
! Component: 3300  -  total flux cleaned = 0.00396138 Jy
! Component: 3350  -  total flux cleaned = 0.00397936 Jy
! Component: 3400  -  total flux cleaned = 0.00400609 Jy
! Component: 3450  -  total flux cleaned = 0.00405049 Jy
! Component: 3500  -  total flux cleaned = 0.00409451 Jy
! Component: 3550  -  total flux cleaned = 0.00412953 Jy
! Component: 3600  -  total flux cleaned = 0.00412947 Jy
! Component: 3650  -  total flux cleaned = 0.00418154 Jy
! Component: 3700  -  total flux cleaned = 0.00420736 Jy
! Component: 3750  -  total flux cleaned = 0.00423314 Jy
! Component: 3800  -  total flux cleaned = 0.00425864 Jy
! Component: 3850  -  total flux cleaned = 0.00428412 Jy
! Component: 3900  -  total flux cleaned = 0.0042841 Jy
! Component: 3950  -  total flux cleaned = 0.00430089 Jy
! Component: 4000  -  total flux cleaned = 0.00430094 Jy
! Component: 4050  -  total flux cleaned = 0.00433427 Jy
! Total flux subtracted in 4096 components = 0.0043591 Jy
! Clean residual min=-0.000525 max=0.000634 Jy/beam
! Clean residual mean=0.000001 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0472939 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 411 components and 0.0472939 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1607+8501_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 3.305 x 10.52 at -1.816 degrees (North through East)
! Clean map  min=-0.00078462  max=0.025203 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1607+8501_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0252035 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000155398 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.84972 1.84972 3.69943 7.39886 14.7977 29.5955 59.1909
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.025 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1607+8501_S_uvs.log closed on Sun Oct  6 14:30:07 2013