! Started logfile: /g0/scr/pima/npcsc_uvs/J1320+8450_X_uvs.log on Sun Oct 6 14:25:10 2013 obs /g0/scr/pima/npcsc_uvs/J1320+8450_X_uva.fits ! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1320+8450_X_uva.fits ! AN table 1: 46 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.583333 visibilities/baseline/integration-bin. ! Found source: J1320+8450 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.40599e+09 8e+06 1 8e+06 ! 02 2 8.47599e+09 8e+06 1 8e+06 ! 03 3 8.79099e+09 8e+06 1 8e+06 ! 04 4 8.89599e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 0 lines of history. ! ! Reading 3864 visibilities. select RR ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =",field_size ! field_size = 1024 print "field_cell =",field_cell ! field_cell = 0.2 print "taper_size =",taper_size ! taper_size = 70 ![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1320+8450_X] integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.012739Jy sigma=1.294177 ! Fit after self-cal, rms=0.900146Jy sigma=1.024036 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.075 mas, bmaj=2.984 mas, bpa=-4.424 degrees ! Estimated noise=25.897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.096661 Jy ! Component: 100 - total flux cleaned = 0.130713 Jy ! Total flux subtracted in 100 components = 0.130713 Jy ! Clean residual min=-0.021694 max=0.029475 Jy/beam ! Clean residual mean=-0.000150 rms=0.007257 Jy/beam ! Combined flux in latest and established models = 0.130712 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.130712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095307Jy sigma=0.133517 ! Fit after self-cal, rms=0.094335Jy sigma=0.132884 ! Inverting map print "************** FINISHED UNIFORM WEIGHTING CLEAN **************" ! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.665 mas, bmaj=3.6 mas, bpa=-1.135 degrees ! Estimated noise=10.5823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0326067 Jy ! Component: 100 - total flux cleaned = 0.0478603 Jy ! Component: 150 - total flux cleaned = 0.0559127 Jy ! Component: 200 - total flux cleaned = 0.0602135 Jy ! Total flux subtracted in 200 components = 0.0602135 Jy ! Clean residual min=-0.019672 max=0.023997 Jy/beam ! Clean residual mean=-0.000085 rms=0.005811 Jy/beam ! Combined flux in latest and established models = 0.190926 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 44 components and 0.190926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094512Jy sigma=0.106752 ! Fit after self-cal, rms=0.094476Jy sigma=0.106586 ! Inverting map print "************** FINISHED NATURAL WEIGHTING CLEAN **************" ! ************** FINISHED NATURAL WEIGHTING CLEAN ************** ! gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.79 FD 0.96 HN 0.90 KP 1.01 ! LA 0.92 MK 0.67 NL 2.17 OV 0.95 ! PT 0.93 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.77 FD 0.90 HN 0.88 KP 0.95 ! LA 0.91 MK 0.66 NL 1.87 OV 0.96 ! PT 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.83 FD 0.94 HN 0.65 KP 0.85 ! LA 0.88 MK 0.51 NL 1.61 OV 1.00 ! PT 0.94 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.76 FD 0.99 HN 0.71 KP 0.91 ! LA 0.88 MK 0.58 NL 1.41 OV 0.93 ! PT 1.00 ! ! ! Fit before self-cal, rms=0.094476Jy sigma=0.106586 ! Fit after self-cal, rms=0.090643Jy sigma=0.096618 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.489 mas, bmaj=3.484 mas, bpa=0.203 degrees ! Estimated noise=8.74342 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0147809 Jy ! Component: 100 - total flux cleaned = -0.0150305 Jy ! Component: 150 - total flux cleaned = -0.0150297 Jy ! Component: 200 - total flux cleaned = -0.0150342 Jy ! Total flux subtracted in 200 components = -0.0150342 Jy ! Clean residual min=-0.010992 max=0.016284 Jy/beam ! Clean residual mean=-0.000046 rms=0.003749 Jy/beam ! Combined flux in latest and established models = 0.175892 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 61 components and 0.175892 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083309Jy sigma=0.099270 ! Fit after self-cal, rms=0.083495Jy sigma=0.099179 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083495Jy sigma=0.099179 ! Fit after self-cal, rms=0.079354Jy sigma=0.095438 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.406 mas, bmaj=3.441 mas, bpa=0.8459 degrees ! Estimated noise=7.50788 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0126052 Jy ! Component: 100 - total flux cleaned = -0.0146456 Jy ! Component: 150 - total flux cleaned = -0.0145591 Jy ! Component: 200 - total flux cleaned = -0.0145639 Jy ! Total flux subtracted in 200 components = -0.0145639 Jy ! Clean residual min=-0.009460 max=0.012946 Jy/beam ! Clean residual mean=-0.000039 rms=0.003095 Jy/beam ! Combined flux in latest and established models = 0.161328 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 67 components and 0.161328 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073349Jy sigma=0.098491 ! Fit after self-cal, rms=0.073292Jy sigma=0.098458 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.19443e-05 Jy ! Component: 100 - total flux cleaned = 2.80482e-05 Jy ! Component: 150 - total flux cleaned = 2.88207e-05 Jy ! Component: 200 - total flux cleaned = 7.84898e-05 Jy ! Total flux subtracted in 200 components = 7.84898e-05 Jy ! Clean residual min=-0.009414 max=0.012720 Jy/beam ! Clean residual mean=-0.000038 rms=0.003080 Jy/beam ! Combined flux in latest and established models = 0.161406 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 72 components and 0.161406 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073199Jy sigma=0.098502 ! Fit after self-cal, rms=0.073113Jy sigma=0.098478 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073113Jy sigma=0.098478 ! Fit after self-cal, rms=0.069603Jy sigma=0.094482 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.311 mas, bmaj=3.422 mas, bpa=1.81 degrees ! Estimated noise=6.32945 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0102175 Jy ! Component: 100 - total flux cleaned = -0.0132373 Jy ! Component: 150 - total flux cleaned = -0.0140418 Jy ! Component: 200 - total flux cleaned = -0.0141097 Jy ! Total flux subtracted in 200 components = -0.0141097 Jy ! Clean residual min=-0.007779 max=0.009917 Jy/beam ! Clean residual mean=-0.000031 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.147297 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 80 components and 0.147297 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064592Jy sigma=0.097933 ! Fit after self-cal, rms=0.064521Jy sigma=0.097894 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.16676e-05 Jy ! Component: 100 - total flux cleaned = -3.91595e-05 Jy ! Component: 150 - total flux cleaned = -1.17394e-05 Jy ! Component: 200 - total flux cleaned = 1.43641e-05 Jy ! Total flux subtracted in 200 components = 1.43641e-05 Jy ! Clean residual min=-0.007699 max=0.009775 Jy/beam ! Clean residual mean=-0.000031 rms=0.002513 Jy/beam ! Combined flux in latest and established models = 0.147311 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.147311 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064506Jy sigma=0.097924 ! Fit after self-cal, rms=0.064466Jy sigma=0.097906 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064466Jy sigma=0.097906 ! Fit after self-cal, rms=0.061338Jy sigma=0.094029 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=4.119 mas, bpa=20.28 degrees ! Estimated noise=6.18044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00919288 Jy ! Component: 100 - total flux cleaned = -0.0113828 Jy ! Component: 150 - total flux cleaned = -0.0114758 Jy ! Component: 200 - total flux cleaned = -0.0114746 Jy ! Total flux subtracted in 200 components = -0.0114746 Jy ! Clean residual min=-0.008047 max=0.010124 Jy/beam ! Clean residual mean=-0.000036 rms=0.002855 Jy/beam ! Combined flux in latest and established models = 0.135836 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 91 components and 0.135836 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057405Jy sigma=0.098329 ! Fit after self-cal, rms=0.057224Jy sigma=0.097842 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.78459e-05 Jy ! Component: 100 - total flux cleaned = 1.32798e-05 Jy ! Component: 150 - total flux cleaned = 8.94339e-06 Jy ! Component: 200 - total flux cleaned = -3.43446e-05 Jy ! Total flux subtracted in 200 components = -3.43446e-05 Jy ! Clean residual min=-0.008069 max=0.009958 Jy/beam ! Clean residual mean=-0.000035 rms=0.002841 Jy/beam ! Combined flux in latest and established models = 0.135802 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 94 components and 0.135802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057304Jy sigma=0.098160 ! Fit after self-cal, rms=0.057216Jy sigma=0.097902 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "************** FINISHED AMPLITUDE SELF-CAL **************" ! ************** FINISHED AMPLITUDE SELF-CAL ************** restore ! Inverting map and beam ! Estimated beam: bmin=1.223 mas, bmaj=3.415 mas, bpa=2.405 degrees ! Estimated noise=5.28706 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.223 x 3.415 at 2.405 degrees (North through East) ! Clean map min=-0.0063309 max=0.071822 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "************** CLEARING MODEL AND STARTING OVER **********" ! ************** CLEARING MODEL AND STARTING OVER ********** clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.885 mas, bmaj=2.927 mas, bpa=0.7666 degrees ! Estimated noise=10.0062 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0414529 Jy ! Component: 100 - total flux cleaned = 0.0653096 Jy ! Component: 150 - total flux cleaned = 0.080672 Jy ! Component: 200 - total flux cleaned = 0.0913505 Jy ! Total flux subtracted in 200 components = 0.0913505 Jy ! Clean residual min=-0.006833 max=0.009131 Jy/beam ! Clean residual mean=-0.000051 rms=0.002282 Jy/beam ! Combined flux in latest and established models = 0.0913506 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 34 model components to the UV plane model. ! The established model now contains 34 components and 0.0913506 Jy ! Inverting map and beam ! Estimated beam: bmin=1.223 mas, bmaj=3.415 mas, bpa=2.405 degrees ! Estimated noise=5.28706 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0171373 Jy ! Component: 100 - total flux cleaned = 0.0268361 Jy ! Component: 150 - total flux cleaned = 0.0326547 Jy ! Component: 200 - total flux cleaned = 0.0361871 Jy ! Total flux subtracted in 200 components = 0.0361871 Jy ! Clean residual min=-0.007446 max=0.008604 Jy/beam ! Clean residual mean=-0.000038 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 0.127538 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 71 components and 0.127538 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.745 mas, bmaj=4.119 mas, bpa=20.28 degrees ! Estimated noise=6.18044 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00440641 Jy ! Component: 100 - total flux cleaned = 0.00532128 Jy ! Component: 150 - total flux cleaned = 0.00546315 Jy ! Component: 200 - total flux cleaned = 0.00559367 Jy ! Total flux subtracted in 200 components = 0.00559367 Jy ! Clean residual min=-0.008554 max=0.010455 Jy/beam ! Clean residual mean=-0.000044 rms=0.002958 Jy/beam ! Combined flux in latest and established models = 0.133131 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.24068e-05 Jy ! Component: 100 - total flux cleaned = 0.000178014 Jy ! Component: 150 - total flux cleaned = 0.000285347 Jy ! Component: 200 - total flux cleaned = 0.000384858 Jy ! Total flux subtracted in 200 components = 0.000384858 Jy ! Clean residual min=-0.008608 max=0.010250 Jy/beam ! Clean residual mean=-0.000042 rms=0.002920 Jy/beam ! Combined flux in latest and established models = 0.133516 Jy ! Adding 14 model components to the UV plane model. ! The established model now contains 74 components and 0.133516 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.223 mas, bmaj=3.415 mas, bpa=2.405 degrees ! Estimated noise=5.28706 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143269 Jy ! Component: 100 - total flux cleaned = -0.00151783 Jy ! Component: 150 - total flux cleaned = -0.00158682 Jy ! Component: 200 - total flux cleaned = -0.00168466 Jy ! Total flux subtracted in 200 components = -0.00168466 Jy ! Clean residual min=-0.006965 max=0.008192 Jy/beam ! Clean residual mean=-0.000029 rms=0.002104 Jy/beam ! Combined flux in latest and established models = 0.131831 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 77 components and 0.131831 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057303Jy sigma=0.098561 ! Fit after self-cal, rms=0.057442Jy sigma=0.098079 wmodel /g0/scr/pima/npcsc_uvs/J1320+8450_X_map.mod ! Writing 77 model components to file: /g0/scr/pima/npcsc_uvs/J1320+8450_X_map.mod wobs /g0/scr/pima/npcsc_uvs/J1320+8450_X_uvs.fits ! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1320+8450_X_uvs.fits wwins /g0/scr/pima/npcsc_uvs/J1320+8450_X_map.win ! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1320+8450_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275136 Jy ! Component: 100 - total flux cleaned = 0.00440488 Jy ! Component: 150 - total flux cleaned = 0.00536633 Jy ! Component: 200 - total flux cleaned = 0.00604338 Jy ! Component: 250 - total flux cleaned = 0.00657727 Jy ! Component: 300 - total flux cleaned = 0.00707023 Jy ! Component: 350 - total flux cleaned = 0.00759834 Jy ! Component: 400 - total flux cleaned = 0.00801499 Jy ! Component: 450 - total flux cleaned = 0.00859316 Jy ! Component: 500 - total flux cleaned = 0.00913151 Jy ! Component: 550 - total flux cleaned = 0.0096364 Jy ! Component: 600 - total flux cleaned = 0.0100575 Jy ! Component: 650 - total flux cleaned = 0.0105562 Jy ! Component: 700 - total flux cleaned = 0.0109842 Jy ! Component: 750 - total flux cleaned = 0.0113937 Jy ! Component: 800 - total flux cleaned = 0.0117847 Jy ! Component: 850 - total flux cleaned = 0.0121174 Jy ! Component: 900 - total flux cleaned = 0.0123973 Jy ! Component: 950 - total flux cleaned = 0.0127049 Jy ! Component: 1000 - total flux cleaned = 0.0130016 Jy ! Component: 1050 - total flux cleaned = 0.0132869 Jy ! Component: 1100 - total flux cleaned = 0.0135276 Jy ! Component: 1150 - total flux cleaned = 0.0138591 Jy ! Component: 1200 - total flux cleaned = 0.0141155 Jy ! Component: 1250 - total flux cleaned = 0.0143653 Jy ! Component: 1300 - total flux cleaned = 0.0146085 Jy ! Component: 1350 - total flux cleaned = 0.0148159 Jy ! Component: 1400 - total flux cleaned = 0.0149891 Jy ! Component: 1450 - total flux cleaned = 0.0151865 Jy ! Component: 1500 - total flux cleaned = 0.0152965 Jy ! Component: 1550 - total flux cleaned = 0.0153241 Jy ! Component: 1600 - total flux cleaned = 0.0153771 Jy ! Component: 1650 - total flux cleaned = 0.0153514 Jy ! Component: 1700 - total flux cleaned = 0.0153519 Jy ! Component: 1750 - total flux cleaned = 0.0153019 Jy ! Component: 1800 - total flux cleaned = 0.0152285 Jy ! Component: 1850 - total flux cleaned = 0.0151805 Jy ! Component: 1900 - total flux cleaned = 0.0151333 Jy ! Component: 1950 - total flux cleaned = 0.0150642 Jy ! Component: 2000 - total flux cleaned = 0.0149966 Jy ! Component: 2050 - total flux cleaned = 0.0149077 Jy ! Component: 2100 - total flux cleaned = 0.01482 Jy ! Component: 2150 - total flux cleaned = 0.0146692 Jy ! Component: 2200 - total flux cleaned = 0.0145213 Jy ! Component: 2250 - total flux cleaned = 0.0143959 Jy ! Component: 2300 - total flux cleaned = 0.0141897 Jy ! Component: 2350 - total flux cleaned = 0.0140271 Jy ! Component: 2400 - total flux cleaned = 0.0139468 Jy ! Component: 2450 - total flux cleaned = 0.0137481 Jy ! Component: 2500 - total flux cleaned = 0.0135521 Jy ! Component: 2550 - total flux cleaned = 0.0133973 Jy ! Component: 2600 - total flux cleaned = 0.0132443 Jy ! Component: 2650 - total flux cleaned = 0.0130739 Jy ! Component: 2700 - total flux cleaned = 0.0129238 Jy ! Component: 2750 - total flux cleaned = 0.012738 Jy ! Component: 2800 - total flux cleaned = 0.0125357 Jy ! Component: 2850 - total flux cleaned = 0.0124079 Jy ! Component: 2900 - total flux cleaned = 0.0122271 Jy ! Component: 2950 - total flux cleaned = 0.0120476 Jy ! Component: 3000 - total flux cleaned = 0.0119408 Jy ! Component: 3050 - total flux cleaned = 0.0117637 Jy ! Component: 3100 - total flux cleaned = 0.0115882 Jy ! Component: 3150 - total flux cleaned = 0.0114487 Jy ! Component: 3200 - total flux cleaned = 0.0113449 Jy ! Component: 3250 - total flux cleaned = 0.0111899 Jy ! Component: 3300 - total flux cleaned = 0.0110531 Jy ! Component: 3350 - total flux cleaned = 0.0109173 Jy ! Component: 3400 - total flux cleaned = 0.0107655 Jy ! Component: 3450 - total flux cleaned = 0.0106984 Jy ! Component: 3500 - total flux cleaned = 0.0105816 Jy ! Component: 3550 - total flux cleaned = 0.0104491 Jy ! Component: 3600 - total flux cleaned = 0.0103502 Jy ! Component: 3650 - total flux cleaned = 0.0102683 Jy ! Component: 3700 - total flux cleaned = 0.0101541 Jy ! Component: 3750 - total flux cleaned = 0.0100405 Jy ! Component: 3800 - total flux cleaned = 0.00992757 Jy ! Component: 3850 - total flux cleaned = 0.00983119 Jy ! Component: 3900 - total flux cleaned = 0.00973517 Jy ! Component: 3950 - total flux cleaned = 0.00960775 Jy ! Component: 4000 - total flux cleaned = 0.00949676 Jy ! Component: 4050 - total flux cleaned = 0.00941785 Jy ! Total flux subtracted in 4096 components = 0.00932351 Jy ! Clean residual min=-0.000864 max=0.000820 Jy/beam ! Clean residual mean=-0.000005 rms=0.000295 Jy/beam ! Combined flux in latest and established models = 0.141155 Jy keep ! Adding 383 model components to the UV plane model. ! The established model now contains 460 components and 0.141155 Jy ![Exited script file: /home/lpetrov/bin/01_muppet] wmap "/g0/scr/pima/npcsc_uvs/J1320+8450_X\_map.fits" ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.223 x 3.415 at 2.405 degrees (North through East) ! Clean map min=-0.0030349 max=0.069776 Jy/beam ! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1320+8450_X_map.fits float peak_flux peak_flux = peak(flux,max) print "The peak flux is",peak_flux ! The peak flux is 0.0697757 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000284179 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.22183 1.22183 2.44365 4.8873 9.77461 19.5492 39.0984 78.1969 print "clev=",int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak=",int(1000*peak_flux)/1000 ! peak= 0.069 quit ! Quitting program ! Log file /g0/scr/pima/npcsc_uvs/J1320+8450_X_uvs.log closed on Sun Oct 6 14:25:14 2013