! Started logfile: /g0/scr/pima/npcsc_uvs/J1306+8008_X_uvs.log on Sun Oct  6 14:24:59 2013
obs /g0/scr/pima/npcsc_uvs/J1306+8008_X_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1306+8008_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.955556 visibilities/baseline/integration-bin.
! Found source: J1306+8008
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.40599e+09        8e+06          1        8e+06
!  02        2  8.47599e+09        8e+06          1        8e+06
!  03        3  8.79099e+09        8e+06          1        8e+06
!  04        4  8.89599e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7912 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1306+8008_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=1.005936Jy  sigma=0.805465
! Fit after  self-cal, rms=0.960379Jy  sigma=0.729328
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7218 mas, bmaj=2.636 mas, bpa=4.601 degrees
! Estimated noise=21.518 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0476036 Jy
! Component: 100  -  total flux cleaned = 0.0596433 Jy
! Total flux subtracted in 100 components = 0.0596433 Jy
! Clean residual min=-0.007681 max=0.009820 Jy/beam
! Clean residual mean=-0.000016 rms=0.002138 Jy/beam
! Combined flux in latest and established models = 0.0596433 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0596433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089908Jy  sigma=0.080660
! Fit after  self-cal, rms=0.088461Jy  sigma=0.079515
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9227 mas, bmaj=2.85 mas, bpa=3.858 degrees
! Estimated noise=11.2997 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0134824 Jy
! Component: 100  -  total flux cleaned = 0.0213714 Jy
! Component: 150  -  total flux cleaned = 0.0267499 Jy
! Component: 200  -  total flux cleaned = 0.0304573 Jy
! Total flux subtracted in 200 components = 0.0304573 Jy
! Clean residual min=-0.005532 max=0.008312 Jy/beam
! Clean residual mean=-0.000020 rms=0.001854 Jy/beam
! Combined flux in latest and established models = 0.0901007 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 35 components and 0.0901006 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.089536Jy  sigma=0.075231
! Fit after  self-cal, rms=0.089451Jy  sigma=0.075086
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     FD        0.87     HN        0.89     KP        0.92     
!   LA        0.89     MK        0.84     NL        0.99     OV        1.24     
!   PT        0.90     SC        0.84     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.85     HN        0.80     KP        0.78     
!   LA        0.82     MK        0.94     NL        0.91     OV        1.38     
!   PT        0.87     SC        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     FD        0.87     HN        0.99     KP        0.67     
!   LA        0.77     MK        0.79     NL        0.92     OV        1.07     
!   PT        0.86     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.72     FD        0.81     HN        0.94     KP        0.75     
!   LA        0.80     MK        0.77     NL        0.90     OV        1.06     
!   PT        0.87     SC        0.78     
! 
! 
! Fit before self-cal, rms=0.089451Jy  sigma=0.075086
! Fit after  self-cal, rms=0.075321Jy  sigma=0.071402
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9191 mas, bmaj=2.815 mas, bpa=4.27 degrees
! Estimated noise=8.57359 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0117934 Jy
! Component: 100  -  total flux cleaned = -0.0143942 Jy
! Component: 150  -  total flux cleaned = -0.0144499 Jy
! Component: 200  -  total flux cleaned = -0.0145128 Jy
! Total flux subtracted in 200 components = -0.0145128 Jy
! Clean residual min=-0.003028 max=0.004059 Jy/beam
! Clean residual mean=-0.000007 rms=0.000837 Jy/beam
! Combined flux in latest and established models = 0.0755878 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 41 components and 0.0755879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070453Jy  sigma=0.073053
! Fit after  self-cal, rms=0.070620Jy  sigma=0.072914
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.070620Jy  sigma=0.072914
! Fit after  self-cal, rms=0.059583Jy  sigma=0.071177
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9029 mas, bmaj=2.797 mas, bpa=4.581 degrees
! Estimated noise=6.72039 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00905014 Jy
! Component: 100  -  total flux cleaned = -0.0111315 Jy
! Component: 150  -  total flux cleaned = -0.0120033 Jy
! Component: 200  -  total flux cleaned = -0.012511 Jy
! Total flux subtracted in 200 components = -0.012511 Jy
! Clean residual min=-0.002316 max=0.002660 Jy/beam
! Clean residual mean=-0.000006 rms=0.000640 Jy/beam
! Combined flux in latest and established models = 0.0630768 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 49 components and 0.0630768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055857Jy  sigma=0.072860
! Fit after  self-cal, rms=0.055877Jy  sigma=0.072847
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4, -0.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0026951 Jy
! Component: 100  -  total flux cleaned = 0.0036561 Jy
! Component: 150  -  total flux cleaned = 0.00413717 Jy
! Component: 200  -  total flux cleaned = 0.0044976 Jy
! Total flux subtracted in 200 components = 0.0044976 Jy
! Clean residual min=-0.002067 max=0.002415 Jy/beam
! Clean residual mean=-0.000002 rms=0.000565 Jy/beam
! Combined flux in latest and established models = 0.0675744 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 73 components and 0.0675744 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055660Jy  sigma=0.072696
! Fit after  self-cal, rms=0.055612Jy  sigma=0.072603
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055612Jy  sigma=0.072603
! Fit after  self-cal, rms=0.046140Jy  sigma=0.070807
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8828 mas, bmaj=2.786 mas, bpa=4.922 degrees
! Estimated noise=5.22735 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00680939 Jy
! Component: 100  -  total flux cleaned = -0.00794107 Jy
! Component: 150  -  total flux cleaned = -0.0076929 Jy
! Component: 200  -  total flux cleaned = -0.00765358 Jy
! Total flux subtracted in 200 components = -0.00765358 Jy
! Clean residual min=-0.001538 max=0.001782 Jy/beam
! Clean residual mean=-0.000000 rms=0.000413 Jy/beam
! Combined flux in latest and established models = 0.0599209 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 86 components and 0.0599209 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043394Jy  sigma=0.072251
! Fit after  self-cal, rms=0.043335Jy  sigma=0.072200
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754286 Jy
! Component: 100  -  total flux cleaned = 0.00107522 Jy
! Component: 150  -  total flux cleaned = 0.00119027 Jy
! Component: 200  -  total flux cleaned = 0.0012394 Jy
! Total flux subtracted in 200 components = 0.0012394 Jy
! Clean residual min=-0.001569 max=0.001738 Jy/beam
! Clean residual mean=0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0611603 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 96 components and 0.0611603 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043225Jy  sigma=0.072191
! Fit after  self-cal, rms=0.043208Jy  sigma=0.072158
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.043208Jy  sigma=0.072158
! Fit after  self-cal, rms=0.036455Jy  sigma=0.070568
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=3.279 mas, bpa=2.354 degrees
! Estimated noise=5.4734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00593205 Jy
! Component: 100  -  total flux cleaned = -0.00748532 Jy
! Component: 150  -  total flux cleaned = -0.00778295 Jy
! Component: 200  -  total flux cleaned = -0.00804034 Jy
! Total flux subtracted in 200 components = -0.00804034 Jy
! Clean residual min=-0.001633 max=0.001712 Jy/beam
! Clean residual mean=-0.000000 rms=0.000460 Jy/beam
! Combined flux in latest and established models = 0.0531199 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 120 components and 0.0531199 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034229Jy  sigma=0.072333
! Fit after  self-cal, rms=0.034169Jy  sigma=0.072220
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411512 Jy
! Component: 100  -  total flux cleaned = 0.000360475 Jy
! Component: 150  -  total flux cleaned = 0.000317075 Jy
! Component: 200  -  total flux cleaned = 0.000299001 Jy
! Total flux subtracted in 200 components = 0.000299001 Jy
! Clean residual min=-0.001518 max=0.001570 Jy/beam
! Clean residual mean=0.000000 rms=0.000435 Jy/beam
! Combined flux in latest and established models = 0.0534189 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 129 components and 0.0534189 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.034118Jy  sigma=0.072245
! Fit after  self-cal, rms=0.034118Jy  sigma=0.072212
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=2.78 mas, bpa=5.225 degrees
! Estimated noise=4.13205 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.865 x 2.78 at 5.225 degrees (North through East)
! Clean map  min=-0.0019331  max=0.025008 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6932 mas, bmaj=2.626 mas, bpa=5.819 degrees
! Estimated noise=7.35323 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0160425 Jy
! Component: 100  -  total flux cleaned = 0.0219555 Jy
! Component: 150  -  total flux cleaned = 0.0260145 Jy
! Component: 200  -  total flux cleaned = 0.0285244 Jy
! Total flux subtracted in 200 components = 0.0285244 Jy
! Clean residual min=-0.002819 max=0.003496 Jy/beam
! Clean residual mean=-0.000005 rms=0.000728 Jy/beam
! Combined flux in latest and established models = 0.0285244 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0285244 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=2.78 mas, bpa=5.225 degrees
! Estimated noise=4.13205 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1, -1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00550789 Jy
! Component: 100  -  total flux cleaned = 0.00923016 Jy
! Component: 150  -  total flux cleaned = 0.0119901 Jy
! Component: 200  -  total flux cleaned = 0.0141682 Jy
! Total flux subtracted in 200 components = 0.0141682 Jy
! Clean residual min=-0.001775 max=0.002151 Jy/beam
! Clean residual mean=-0.000007 rms=0.000534 Jy/beam
! Combined flux in latest and established models = 0.0426926 Jy
! Adding 51 model components to the UV plane model.
! The established model now contains 64 components and 0.0426926 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.049 mas, bmaj=3.279 mas, bpa=2.354 degrees
! Estimated noise=5.4734 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00348456 Jy
! Component: 100  -  total flux cleaned = 0.00565174 Jy
! Component: 150  -  total flux cleaned = 0.00716852 Jy
! Component: 200  -  total flux cleaned = 0.0081707 Jy
! Total flux subtracted in 200 components = 0.0081707 Jy
! Clean residual min=-0.001894 max=0.001617 Jy/beam
! Clean residual mean=-0.000004 rms=0.000491 Jy/beam
! Combined flux in latest and established models = 0.0508633 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000447246 Jy
! Component: 100  -  total flux cleaned = 0.000861154 Jy
! Component: 150  -  total flux cleaned = 0.00116307 Jy
! Component: 200  -  total flux cleaned = 0.00138171 Jy
! Total flux subtracted in 200 components = 0.00138171 Jy
! Clean residual min=-0.001604 max=0.001447 Jy/beam
! Clean residual mean=-0.000001 rms=0.000432 Jy/beam
! Combined flux in latest and established models = 0.052245 Jy
! Adding 60 model components to the UV plane model.
! The established model now contains 124 components and 0.052245 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.865 mas, bmaj=2.78 mas, bpa=5.225 degrees
! Estimated noise=4.13205 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000547454 Jy
! Component: 100  -  total flux cleaned = -0.000211361 Jy
! Component: 150  -  total flux cleaned = 7.82336e-05 Jy
! Component: 200  -  total flux cleaned = 0.000276434 Jy
! Total flux subtracted in 200 components = 0.000276434 Jy
! Clean residual min=-0.001294 max=0.001297 Jy/beam
! Clean residual mean=-0.000000 rms=0.000314 Jy/beam
! Combined flux in latest and established models = 0.0525215 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 137 components and 0.0525215 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.033962Jy  sigma=0.072367
! Fit after  self-cal, rms=0.033953Jy  sigma=0.072207
wmodel /g0/scr/pima/npcsc_uvs/J1306+8008_X_map.mod
! Writing 137 model components to file: /g0/scr/pima/npcsc_uvs/J1306+8008_X_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1306+8008_X_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1306+8008_X_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1306+8008_X_map.win
! wwins: Wrote 3 windows to /g0/scr/pima/npcsc_uvs/J1306+8008_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00023309 Jy
! Component: 100  -  total flux cleaned = -0.000212456 Jy
! Component: 150  -  total flux cleaned = -0.000231492 Jy
! Component: 200  -  total flux cleaned = -0.000212285 Jy
! Component: 250  -  total flux cleaned = -0.000211962 Jy
! Component: 300  -  total flux cleaned = -0.000229441 Jy
! Component: 350  -  total flux cleaned = -0.0002462 Jy
! Component: 400  -  total flux cleaned = -0.000213312 Jy
! Component: 450  -  total flux cleaned = -0.000229603 Jy
! Component: 500  -  total flux cleaned = -0.000245677 Jy
! Component: 550  -  total flux cleaned = -0.000276564 Jy
! Component: 600  -  total flux cleaned = -0.000322277 Jy
! Component: 650  -  total flux cleaned = -0.00035209 Jy
! Component: 700  -  total flux cleaned = -0.000381063 Jy
! Component: 750  -  total flux cleaned = -0.000409604 Jy
! Component: 800  -  total flux cleaned = -0.000451849 Jy
! Component: 850  -  total flux cleaned = -0.000465367 Jy
! Component: 900  -  total flux cleaned = -0.000437975 Jy
! Component: 950  -  total flux cleaned = -0.000410908 Jy
! Component: 1000  -  total flux cleaned = -0.000344426 Jy
! Component: 1050  -  total flux cleaned = -0.000357362 Jy
! Component: 1100  -  total flux cleaned = -0.000331238 Jy
! Component: 1150  -  total flux cleaned = -0.000343948 Jy
! Component: 1200  -  total flux cleaned = -0.00031854 Jy
! Component: 1250  -  total flux cleaned = -0.000281159 Jy
! Component: 1300  -  total flux cleaned = -0.000330709 Jy
! Component: 1350  -  total flux cleaned = -0.000318319 Jy
! Component: 1400  -  total flux cleaned = -0.000318319 Jy
! Component: 1450  -  total flux cleaned = -0.000306378 Jy
! Component: 1500  -  total flux cleaned = -0.000318077 Jy
! Component: 1550  -  total flux cleaned = -0.000259281 Jy
! Component: 1600  -  total flux cleaned = -0.000282641 Jy
! Component: 1650  -  total flux cleaned = -0.000294023 Jy
! Component: 1700  -  total flux cleaned = -0.000270879 Jy
! Component: 1750  -  total flux cleaned = -0.000270762 Jy
! Component: 1800  -  total flux cleaned = -0.000237048 Jy
! Component: 1850  -  total flux cleaned = -0.000281619 Jy
! Component: 1900  -  total flux cleaned = -0.000270489 Jy
! Component: 1950  -  total flux cleaned = -0.000281391 Jy
! Component: 2000  -  total flux cleaned = -0.000259771 Jy
! Component: 2050  -  total flux cleaned = -0.000270621 Jy
! Component: 2100  -  total flux cleaned = -0.00033472 Jy
! Component: 2150  -  total flux cleaned = -0.000313455 Jy
! Component: 2200  -  total flux cleaned = -0.000366168 Jy
! Component: 2250  -  total flux cleaned = -0.0003555 Jy
! Component: 2300  -  total flux cleaned = -0.000365892 Jy
! Component: 2350  -  total flux cleaned = -0.000396814 Jy
! Component: 2400  -  total flux cleaned = -0.000407027 Jy
! Component: 2450  -  total flux cleaned = -0.000457889 Jy
! Component: 2500  -  total flux cleaned = -0.000447877 Jy
! Component: 2550  -  total flux cleaned = -0.000498114 Jy
! Component: 2600  -  total flux cleaned = -0.000567914 Jy
! Component: 2650  -  total flux cleaned = -0.000548006 Jy
! Component: 2700  -  total flux cleaned = -0.000567682 Jy
! Component: 2750  -  total flux cleaned = -0.000587107 Jy
! Component: 2800  -  total flux cleaned = -0.000655144 Jy
! Component: 2850  -  total flux cleaned = -0.000645522 Jy
! Component: 2900  -  total flux cleaned = -0.000664667 Jy
! Component: 2950  -  total flux cleaned = -0.00067417 Jy
! Component: 3000  -  total flux cleaned = -0.000674133 Jy
! Component: 3050  -  total flux cleaned = -0.000711892 Jy
! Component: 3100  -  total flux cleaned = -0.000721168 Jy
! Component: 3150  -  total flux cleaned = -0.000739847 Jy
! Component: 3200  -  total flux cleaned = -0.000758302 Jy
! Component: 3250  -  total flux cleaned = -0.000758251 Jy
! Component: 3300  -  total flux cleaned = -0.0007857 Jy
! Component: 3350  -  total flux cleaned = -0.000794817 Jy
! Component: 3400  -  total flux cleaned = -0.000830976 Jy
! Component: 3450  -  total flux cleaned = -0.000830968 Jy
! Component: 3500  -  total flux cleaned = -0.000875768 Jy
! Component: 3550  -  total flux cleaned = -0.000893517 Jy
! Component: 3600  -  total flux cleaned = -0.000884573 Jy
! Component: 3650  -  total flux cleaned = -0.000884639 Jy
! Component: 3700  -  total flux cleaned = -0.000945979 Jy
! Component: 3750  -  total flux cleaned = -0.000954654 Jy
! Component: 3800  -  total flux cleaned = -0.000972052 Jy
! Component: 3850  -  total flux cleaned = -0.00100653 Jy
! Component: 3900  -  total flux cleaned = -0.00102365 Jy
! Component: 3950  -  total flux cleaned = -0.00105774 Jy
! Component: 4000  -  total flux cleaned = -0.00106627 Jy
! Component: 4050  -  total flux cleaned = -0.00112539 Jy
! Total flux subtracted in 4096 components = -0.00108336 Jy
! Clean residual min=-0.000625 max=0.000507 Jy/beam
! Clean residual mean=-0.000000 rms=0.000150 Jy/beam
! Combined flux in latest and established models = 0.0514381 Jy
keep
! Adding 308 model components to the UV plane model.
! The established model now contains 445 components and 0.0514381 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1306+8008_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.865 x 2.78 at 5.225 degrees (North through East)
! Clean map  min=-0.0016655  max=0.024318 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1306+8008_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0243175 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00014925 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.84127 1.84127 3.68254 7.36509 14.7302 29.4604 58.9207
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0004 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.024 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1306+8008_X_uvs.log closed on Sun Oct  6 14:25:03 2013