! Started logfile: /g0/scr/pima/npcsc_uvs/J1244+8755_S_uvs.log on Sun Oct  6 14:29:00 2013
obs /g0/scr/pima/npcsc_uvs/J1244+8755_S_uva.fits
! Reading UV FITS file: /g0/scr/pima/npcsc_uvs/J1244+8755_S_uva.fits
! AN table 1: 46 integrations on 15 of 15 possible baselines.
! Apparent sampling: 0.533333 visibilities/baseline/integration-bin.
! Found source: J1244+8755
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23299e+09        8e+06          1        8e+06
!  02        2  2.26299e+09        8e+06          1        8e+06
!  03        3  2.35299e+09        8e+06          1        8e+06
!  04        4  2.37299e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 1472 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.5 
print "taper_size =",taper_size
! taper_size = 20 
![@/home/lpetrov/bin/01_muppet /g0/scr/pima/npcsc_uvs/J1244+8755_S]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 46 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.006197Jy  sigma=0.796138
! Fit after  self-cal, rms=0.931117Jy  sigma=0.693917
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=17.01 mas, bmaj=38.29 mas, bpa=6.634 degrees
! Estimated noise=55.669 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0813324 Jy
! Component: 100  -  total flux cleaned = 0.0753763 Jy
! Total flux subtracted in 100 components = 0.0753763 Jy
! Clean residual min=-0.008979 max=0.008908 Jy/beam
! Clean residual mean=0.000061 rms=0.004802 Jy/beam
! Combined flux in latest and established models = 0.0753763 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0753763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078790Jy  sigma=0.064113
! Fit after  self-cal, rms=0.077523Jy  sigma=0.063567
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.42 mas, bmaj=45.35 mas, bpa=9.128 degrees
! Estimated noise=28.2011 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0108583 Jy
! Component: 100  -  total flux cleaned = 0.0125797 Jy
! Component: 150  -  total flux cleaned = 0.0123678 Jy
! Component: 200  -  total flux cleaned = 0.0119724 Jy
! Total flux subtracted in 200 components = 0.0119724 Jy
! Clean residual min=-0.003307 max=0.003307 Jy/beam
! Clean residual mean=0.000043 rms=0.001148 Jy/beam
! Combined flux in latest and established models = 0.0873488 Jy
! Performing phase self-cal
! Adding 87 model components to the UV plane model.
! The established model now contains 108 components and 0.0873488 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078722Jy  sigma=0.060204
! Fit after  self-cal, rms=0.078348Jy  sigma=0.060019
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        0.83     LA        1.20     NL        1.00*    
!   OV        0.97     PT        0.90     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.85     KP        0.91     LA        0.96     NL        1.00*    
!   OV        0.88     PT        0.90     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.88     KP        1.16     LA        0.77     NL        1.00*    
!   OV        0.81     PT        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.87     KP        0.88     LA        0.70     NL        1.00*    
!   OV        0.86     PT        0.82     
! 
! 
! Fit before self-cal, rms=0.078348Jy  sigma=0.060019
! Fit after  self-cal, rms=0.071121Jy  sigma=0.054374
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=16.42 mas, bmaj=45.75 mas, bpa=9.188 degrees
! Estimated noise=22.6324 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0137402 Jy
! Component: 100  -  total flux cleaned = -0.0150163 Jy
! Component: 150  -  total flux cleaned = -0.0157465 Jy
! Component: 200  -  total flux cleaned = -0.0156536 Jy
! Total flux subtracted in 200 components = -0.0156536 Jy
! Clean residual min=-0.001515 max=0.001536 Jy/beam
! Clean residual mean=-0.000013 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.0716952 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 158 components and 0.0716952 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063399Jy  sigma=0.056663
! Fit after  self-cal, rms=0.063457Jy  sigma=0.056541
! Inverting map 
! Added new window around map position (71.5, 94.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00238666 Jy
! Component: 100  -  total flux cleaned = 0.00306038 Jy
! Component: 150  -  total flux cleaned = 0.00358504 Jy
! Component: 200  -  total flux cleaned = 0.00424845 Jy
! Total flux subtracted in 200 components = 0.00424845 Jy
! Clean residual min=-0.001540 max=0.001265 Jy/beam
! Clean residual mean=0.000007 rms=0.000393 Jy/beam
! Combined flux in latest and established models = 0.0759436 Jy
! Performing phase self-cal
! Adding 64 model components to the UV plane model.
! The established model now contains 222 components and 0.0759436 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063022Jy  sigma=0.056702
! Fit after  self-cal, rms=0.062735Jy  sigma=0.056579
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062735Jy  sigma=0.056579
! Fit after  self-cal, rms=0.058804Jy  sigma=0.053824
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.34 mas, bmaj=46.22 mas, bpa=9.502 degrees
! Estimated noise=18.9211 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.002528 Jy
! Component: 100  -  total flux cleaned = 0.00218337 Jy
! Component: 150  -  total flux cleaned = 0.00129271 Jy
! Component: 200  -  total flux cleaned = 0.000619916 Jy
! Total flux subtracted in 200 components = 0.000619916 Jy
! Clean residual min=-0.005751 max=0.004219 Jy/beam
! Clean residual mean=-0.000022 rms=0.001844 Jy/beam
! Combined flux in latest and established models = 0.0765636 Jy
selfcal
! Performing phase self-cal
! Adding 67 model components to the UV plane model.
! The established model now contains 287 components and 0.0765635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055388Jy  sigma=0.054909
! Fit after  self-cal, rms=0.055187Jy  sigma=0.054695
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000928518 Jy
! Component: 100  -  total flux cleaned = 0.000320293 Jy
! Component: 150  -  total flux cleaned = -0.000258657 Jy
! Component: 200  -  total flux cleaned = -0.00073788 Jy
! Total flux subtracted in 200 components = -0.00073788 Jy
! Clean residual min=-0.003774 max=0.002904 Jy/beam
! Clean residual mean=-0.000016 rms=0.001304 Jy/beam
! Combined flux in latest and established models = 0.0758257 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 336 components and 0.0758256 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054270Jy  sigma=0.055153
! Fit after  self-cal, rms=0.054128Jy  sigma=0.054964
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054128Jy  sigma=0.054964
! Fit after  self-cal, rms=0.051908Jy  sigma=0.053379
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.11 mas, bmaj=46.37 mas, bpa=10.13 degrees
! Estimated noise=16.6435 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00266429 Jy
! Component: 100  -  total flux cleaned = 0.00127839 Jy
! Component: 150  -  total flux cleaned = 0.000267316 Jy
! Component: 200  -  total flux cleaned = -0.0002934 Jy
! Total flux subtracted in 200 components = -0.0002934 Jy
! Clean residual min=-0.005225 max=0.004116 Jy/beam
! Clean residual mean=-0.000019 rms=0.001746 Jy/beam
! Combined flux in latest and established models = 0.0755322 Jy
selfcal
! Performing phase self-cal
! Adding 65 model components to the UV plane model.
! The established model now contains 370 components and 0.0755323 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.049265Jy  sigma=0.054447
! Fit after  self-cal, rms=0.049124Jy  sigma=0.054254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00072494 Jy
! Component: 100  -  total flux cleaned = -0.00127429 Jy
! Component: 150  -  total flux cleaned = -0.00187847 Jy
! Component: 200  -  total flux cleaned = -0.00259211 Jy
! Total flux subtracted in 200 components = -0.00259211 Jy
! Clean residual min=-0.003803 max=0.003049 Jy/beam
! Clean residual mean=-0.000014 rms=0.001332 Jy/beam
! Combined flux in latest and established models = 0.0729401 Jy
! Performing phase self-cal
! Adding 54 model components to the UV plane model.
! The established model now contains 390 components and 0.0729402 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048369Jy  sigma=0.054657
! Fit after  self-cal, rms=0.048351Jy  sigma=0.054598
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.048351Jy  sigma=0.054598
! Fit after  self-cal, rms=0.046765Jy  sigma=0.053201
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.19 mas, bmaj=46.32 mas, bpa=10.48 degrees
! Estimated noise=14.8192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00262782 Jy
! Component: 100  -  total flux cleaned = 0.00170785 Jy
! Component: 150  -  total flux cleaned = 0.000679034 Jy
! Component: 200  -  total flux cleaned = -0.000574509 Jy
! Total flux subtracted in 200 components = -0.000574509 Jy
! Clean residual min=-0.005044 max=0.004099 Jy/beam
! Clean residual mean=-0.000017 rms=0.001687 Jy/beam
! Combined flux in latest and established models = 0.0723657 Jy
selfcal
! Performing phase self-cal
! Adding 66 model components to the UV plane model.
! The established model now contains 419 components and 0.0723657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044757Jy  sigma=0.054204
! Fit after  self-cal, rms=0.044692Jy  sigma=0.054026
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00104256 Jy
! Component: 100  -  total flux cleaned = -0.00200284 Jy
! Component: 150  -  total flux cleaned = -0.00273183 Jy
! Component: 200  -  total flux cleaned = -0.00322658 Jy
! Total flux subtracted in 200 components = -0.00322658 Jy
! Clean residual min=-0.003755 max=0.003158 Jy/beam
! Clean residual mean=-0.000012 rms=0.001334 Jy/beam
! Combined flux in latest and established models = 0.0691391 Jy
! Performing phase self-cal
! Adding 55 model components to the UV plane model.
! The established model now contains 436 components and 0.0691391 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.044035Jy  sigma=0.054449
! Fit after  self-cal, rms=0.044017Jy  sigma=0.054409
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=15.86 mas, bmaj=46.56 mas, bpa=10.78 degrees
! Estimated noise=14.7526 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.86 x 46.56 at 10.78 degrees (North through East)
! Clean map  min=-0.013991  max=0.074584 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.14 mas, bmaj=39.46 mas, bpa=10.67 degrees
! Estimated noise=31.0363 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0259166 Jy
! Component: 100  -  total flux cleaned = -0.0221906 Jy
! Component: 150  -  total flux cleaned = -0.0204529 Jy
! Component: 200  -  total flux cleaned = -0.0161871 Jy
! Total flux subtracted in 200 components = -0.0161871 Jy
! Clean residual min=-0.021649 max=0.023419 Jy/beam
! Clean residual mean=0.000070 rms=0.008093 Jy/beam
! Combined flux in latest and established models = -0.016187 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 76 model components to the UV plane model.
! The established model now contains 76 components and -0.016187 Jy
! Inverting map and beam 
! Estimated beam: bmin=15.86 mas, bmaj=46.56 mas, bpa=10.78 degrees
! Estimated noise=14.7526 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00601476 Jy
! Component: 100  -  total flux cleaned = 0.0117024 Jy
! Component: 150  -  total flux cleaned = 0.0174906 Jy
! Component: 200  -  total flux cleaned = 0.0236684 Jy
! Total flux subtracted in 200 components = 0.0236684 Jy
! Clean residual min=-0.020485 max=0.022324 Jy/beam
! Clean residual mean=0.000116 rms=0.007284 Jy/beam
! Combined flux in latest and established models = 0.00748138 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 159 components and 0.00748139 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=16.19 mas, bmaj=46.32 mas, bpa=10.48 degrees
! Estimated noise=14.8192 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0055696 Jy
! Component: 100  -  total flux cleaned = 0.0112263 Jy
! Component: 150  -  total flux cleaned = 0.0165096 Jy
! Component: 200  -  total flux cleaned = 0.021685 Jy
! Total flux subtracted in 200 components = 0.021685 Jy
! Clean residual min=-0.018506 max=0.019518 Jy/beam
! Clean residual mean=0.000103 rms=0.006624 Jy/beam
! Combined flux in latest and established models = 0.0291664 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00507064 Jy
! Component: 100  -  total flux cleaned = 0.00986309 Jy
! Component: 150  -  total flux cleaned = 0.0144204 Jy
! Component: 200  -  total flux cleaned = 0.0187675 Jy
! Total flux subtracted in 200 components = 0.0187675 Jy
! Clean residual min=-0.016250 max=0.017331 Jy/beam
! Clean residual mean=0.000087 rms=0.005934 Jy/beam
! Combined flux in latest and established models = 0.0479338 Jy
! Adding 71 model components to the UV plane model.
! The established model now contains 210 components and 0.0479338 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=15.86 mas, bmaj=46.56 mas, bpa=10.78 degrees
! Estimated noise=14.7526 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00314448 Jy
! Component: 100  -  total flux cleaned = 0.00633322 Jy
! Component: 150  -  total flux cleaned = 0.00926477 Jy
! Component: 200  -  total flux cleaned = 0.0121113 Jy
! Total flux subtracted in 200 components = 0.0121113 Jy
! Clean residual min=-0.014495 max=0.016579 Jy/beam
! Clean residual mean=0.000085 rms=0.005405 Jy/beam
! Combined flux in latest and established models = 0.0600451 Jy
selfcal
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 235 components and 0.0600451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.045834Jy  sigma=0.077515
! Fit after  self-cal, rms=0.041094Jy  sigma=0.067896
wmodel /g0/scr/pima/npcsc_uvs/J1244+8755_S_map.mod
! Writing 235 model components to file: /g0/scr/pima/npcsc_uvs/J1244+8755_S_map.mod
wobs /g0/scr/pima/npcsc_uvs/J1244+8755_S_uvs.fits
! Writing UV FITS file: /g0/scr/pima/npcsc_uvs/J1244+8755_S_uvs.fits
wwins /g0/scr/pima/npcsc_uvs/J1244+8755_S_map.win
! wwins: Wrote 1 windows to /g0/scr/pima/npcsc_uvs/J1244+8755_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00425573 Jy
! Component: 100  -  total flux cleaned = 0.00568886 Jy
! Component: 150  -  total flux cleaned = 0.00685443 Jy
! Component: 200  -  total flux cleaned = 0.00754909 Jy
! Component: 250  -  total flux cleaned = 0.00822455 Jy
! Component: 300  -  total flux cleaned = 0.00844889 Jy
! Component: 350  -  total flux cleaned = 0.00826428 Jy
! Component: 400  -  total flux cleaned = 0.00826299 Jy
! Component: 450  -  total flux cleaned = 0.00816322 Jy
! Component: 500  -  total flux cleaned = 0.00820941 Jy
! Component: 550  -  total flux cleaned = 0.00821057 Jy
! Component: 600  -  total flux cleaned = 0.00828756 Jy
! Component: 650  -  total flux cleaned = 0.00842919 Jy
! Component: 700  -  total flux cleaned = 0.00859575 Jy
! Component: 750  -  total flux cleaned = 0.00872061 Jy
! Component: 800  -  total flux cleaned = 0.00877932 Jy
! Component: 850  -  total flux cleaned = 0.00880783 Jy
! Component: 900  -  total flux cleaned = 0.00883463 Jy
! Component: 950  -  total flux cleaned = 0.00863234 Jy
! Component: 1000  -  total flux cleaned = 0.00840672 Jy
! Component: 1050  -  total flux cleaned = 0.00823219 Jy
! Component: 1100  -  total flux cleaned = 0.00805848 Jy
! Component: 1150  -  total flux cleaned = 0.00791029 Jy
! Component: 1200  -  total flux cleaned = 0.00773768 Jy
! Component: 1250  -  total flux cleaned = 0.00761425 Jy
! Component: 1300  -  total flux cleaned = 0.00741657 Jy
! Component: 1350  -  total flux cleaned = 0.00729257 Jy
! Component: 1400  -  total flux cleaned = 0.00711861 Jy
! Component: 1450  -  total flux cleaned = 0.00696897 Jy
! Component: 1500  -  total flux cleaned = 0.00679346 Jy
! Component: 1550  -  total flux cleaned = 0.00664233 Jy
! Component: 1600  -  total flux cleaned = 0.00649009 Jy
! Component: 1650  -  total flux cleaned = 0.00638775 Jy
! Component: 1700  -  total flux cleaned = 0.00620701 Jy
! Component: 1750  -  total flux cleaned = 0.00602351 Jy
! Component: 1800  -  total flux cleaned = 0.0058643 Jy
! Component: 1850  -  total flux cleaned = 0.00564915 Jy
! Component: 1900  -  total flux cleaned = 0.00545767 Jy
! Component: 1950  -  total flux cleaned = 0.00523499 Jy
! Component: 2000  -  total flux cleaned = 0.00506515 Jy
! Component: 2050  -  total flux cleaned = 0.00483399 Jy
! Component: 2100  -  total flux cleaned = 0.00471595 Jy
! Component: 2150  -  total flux cleaned = 0.00456618 Jy
! Component: 2200  -  total flux cleaned = 0.0044134 Jy
! Component: 2250  -  total flux cleaned = 0.00422496 Jy
! Component: 2300  -  total flux cleaned = 0.00399923 Jy
! Component: 2350  -  total flux cleaned = 0.00386771 Jy
! Component: 2400  -  total flux cleaned = 0.00363395 Jy
! Component: 2450  -  total flux cleaned = 0.00356478 Jy
! Component: 2500  -  total flux cleaned = 0.00342429 Jy
! Component: 2550  -  total flux cleaned = 0.00324538 Jy
! Component: 2600  -  total flux cleaned = 0.00309841 Jy
! Component: 2650  -  total flux cleaned = 0.00302369 Jy
! Component: 2700  -  total flux cleaned = 0.0028682 Jy
! Component: 2750  -  total flux cleaned = 0.00282837 Jy
! Component: 2800  -  total flux cleaned = 0.00262532 Jy
! Component: 2850  -  total flux cleaned = 0.00258334 Jy
! Component: 2900  -  total flux cleaned = 0.00245601 Jy
! Component: 2950  -  total flux cleaned = 0.00236679 Jy
! Component: 3000  -  total flux cleaned = 0.0023214 Jy
! Component: 3050  -  total flux cleaned = 0.00218389 Jy
! Component: 3100  -  total flux cleaned = 0.00223221 Jy
! Component: 3150  -  total flux cleaned = 0.00218501 Jy
! Component: 3200  -  total flux cleaned = 0.00223587 Jy
! Component: 3250  -  total flux cleaned = 0.00223652 Jy
! Component: 3300  -  total flux cleaned = 0.00223616 Jy
! Component: 3350  -  total flux cleaned = 0.00228934 Jy
! Component: 3400  -  total flux cleaned = 0.00234479 Jy
! Component: 3450  -  total flux cleaned = 0.00245955 Jy
! Component: 3500  -  total flux cleaned = 0.00245951 Jy
! Component: 3550  -  total flux cleaned = 0.00252105 Jy
! Component: 3600  -  total flux cleaned = 0.00264663 Jy
! Component: 3650  -  total flux cleaned = 0.00264529 Jy
! Component: 3700  -  total flux cleaned = 0.00284566 Jy
! Component: 3750  -  total flux cleaned = 0.00298469 Jy
! Component: 3800  -  total flux cleaned = 0.00312885 Jy
! Component: 3850  -  total flux cleaned = 0.00312844 Jy
! Component: 3900  -  total flux cleaned = 0.0032056 Jy
! Component: 3950  -  total flux cleaned = 0.00328491 Jy
! Component: 4000  -  total flux cleaned = 0.00336684 Jy
! Component: 4050  -  total flux cleaned = 0.0033691 Jy
! Total flux subtracted in 4096 components = 0.00336888 Jy
! Clean residual min=-0.005077 max=0.004670 Jy/beam
! Clean residual mean=0.000082 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 0.063414 Jy
keep
! Adding 507 model components to the UV plane model.
! The established model now contains 742 components and 0.063414 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/g0/scr/pima/npcsc_uvs/J1244+8755_S\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 15.86 x 46.56 at 10.78 degrees (North through East)
! Clean map  min=-0.01948  max=0.029818 Jy/beam
! Writing clean map to FITS file: /g0/scr/pima/npcsc_uvs/J1244+8755_S_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0298175 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.0018148 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -18.259 18.259 36.518 73.0361
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0054 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.029 
quit
! Quitting program
! Log file /g0/scr/pima/npcsc_uvs/J1244+8755_S_uvs.log closed on Sun Oct  6 14:29:06 2013